12G Shotshell Filler Wad/Overshot Card Punch - Completed!

[@FullLeadTaco]

love it when people see a need for something useful and then go ahead and design it and make it!

[@miketreen7403]

Glad to see it finally came together! Congrats 👍🏻👍🏻

[@TATVCanada]

Thanks, Mike.

[@LoadsofBacon]

That's outstanding brother!

[@TATVCanada]

Took for-freaking-ever...

[@gruntspy44]

Bacon you are everywhere!

[@LoadsofBacon]

@@gruntspy44 - so are you 😁

[@stclairstclair]

I'm a retired GM mechanic and long time cheap ass, My family made everything, We never once payed anyone to do anything, I love your video am am sun scribbled for life! I made a shot maker that took my 5 years to perfect, Thank you!!!!!!!

[@cyanidetrece]

5 years? 😮 Maybe you should have paid someone to make it. 🤣 I kid. I kid. ✌️

[@stclairstclair]

cyanidetrece, That was from the time I had the idea, I would pull it out and work on it every few years when I was casting aluminum in my home foundry on other castings, Please go look at my ten year old steam engine video...

[@TATVCanada]

Can you send me a link to your shotmaker? I'd love to see it.

[@stclairstclair]

TATV Canada, Funny you should ask, I had filmed it with my phone (the wrong way!) And when I went to re-view it I found I had somehow previously deleted it! Ha ha God damn it, Well I was thinking about re-shooting the video Non grandpa style anyway. All my videos are ten years old but I will post a vid soon, did you see my stream engine?

[@astridvallati4762]

I use a 12ga Officer barrel segment, sharpened, and fitted to a 3ton Arbour Press Ram. The anvil is a piece of Endgrain Aussie Hardwood ( Red Gum) For wad stock I use waxed corrugated cardboard ( chiller boxes for Vegetables), which gives a moisture proof and self sealing over powder wad ( both star crimp and Rollcrimp) for Short (30mm) Starter Gun blanks ( Rowing races, Surf Boat comps, small yacht/boat races etc) Same wad for Film and Theatre Blanks, usually 70mm or 50mm cases. DocAV AVBFilmGuns Australia.

[@nakoawarrior3186]

I worked in a machine shop there was a couple dusty press's in the back,... with tools attached,.. you could punch out any diameter. This is something Lee should have designed. I would just use a drill press,.... and a golf shaft and a zip wheel to cut the shaft at the proper diameter. You would put the drill press on the slowest speed. Cut the shaft at the right diameter so as the big end is chucked in the press. you turn the shaft against a belt sander and it gets razor sharp,.... the run the zip wheel across it a couple times creating gaps or teeth,.. then begin cutting your wads. Or take a 3/4 drill bit drill through a 1/2 steel piece clamp it in place. Then remove the drill bit and on the flat end yo sand it to a sharp 90 degree edge you chuck the bit in back wards and press the handle down to cut discs. You choose your diameter with a drill chart,...I make them for a muzzloading shotgun so their larger.

[@shadowcastre]

Nicely done..! That's awesome for those using .65 filler wads. Have you considered making sizes like .71 for over powder cards and those not using a plastic wad? Thanks for the video..

[@TATVCanada]

Yes and no; I have a full-size wad punch for 12G here: kzbin.info/www/bejne/rXSTmYqNrtV8oqc However it is 0.738", not 0.710"

[@danielbox8204]

@@TATVCanada how do I order one of these and how much? Thanks

[@spu3]

Nicely done! If you ever decide to make a 410 Shotshell Filler Wad/Overshot Card Punch, I'd be interested.

[@TATVCanada]

I've finished the designs for the 20G; 410 is next on my list but I don't have any components on hand to take measurements.

[@keystonecountryboy]

@@TATVCanada 16 gauge? I would mail you a 16 ga wad...I believe for 16 if you used a arch punch it would be 21/32nds size punch

[@mikebagnallshooting9818]

Can't wait for mine to arrive nice one brother.

[@TATVCanada]

You'll have to let me know how you make out.

[@mikebagnallshooting9818]

For sure full review coming up brother I'm excited for it to arrive many thanks again for you fast reply and service speak soon.

[@sfwh4543]

Excellent video and excellent looking product. Would love to see some of your cartridge loads using these materials.

[@TATVCanada]

Thank you very much, I appreciate the feedback. Load development is coming, I'm just way, wayyyy behind right now. Fair bit of overtime at work and we're stuck in the same heatwave you folks are which makes it really miserable to film outdoors.

[@juantovar4861]

I make my own and I have tons of shot cards. I'll buy your tool and try it out

[@MrSanteeclaus]

Awesome- I think SASS people would like this item

[@littlehills739]

copper pipe on top to make collection tube. maybe larger diameter at the base near the shell holder raise punch into die then slide pvc tube over ram so it dosnt lower down passed the die so no one pops out of the die and rams it bk in to the base of the die

[@FreemanFPS]

Genius. I will definitely order one very soon

[@ocean374]

thats awesome i was thinking about it yesterday morning

[@verizonwireless4929]

How much do you sell the set for ?

[@TATVCanada]

Visit www.tatvcanada.com for details.

[@kennethparks8798]

I really REALLY want this!!

[@TATVCanada]

They're available for purchase online at www.tatvcanada.com

[@kennethparks8798]

@@TATVCanada awesome! Thanks!

[@tuberaider]

Fantastic! I just placed an order.

[@andrewsavage1872]

Would be even better if I didn't need 12, 20 and 410 while they are $100 each. Guess I'll be sticking with the cutter I made from 50BMG brass and find something that'll work for the other two sizes I need.

[@ReikibyMike-SixofCupsTarot]

This would be handy in 410 for us T/C guys that enjoy the single shot pistol!!

[@TATVCanada]

I do produce .410 models, but stock is limited due to lower demand.

[@ReikibyMike-SixofCupsTarot]

TATV Canada what diameter do you cut the cards to?

[@russellcarson8768]

Apparently the seller is no longer filling orders, or at least we were never able to get a reply. I suppose COVID has shut them down which is too bad. For those that need to punch your own cards, check out Overshot Wads the Easy Way by Barry Declined and do it the way he shows 2:00 into the video. When the owner couldn't buy the TATV press, he had me buy a punch. For 20 ga. the General Tools 1280-O Hollow Steel Punch from Amazon in 5/8" when used like in the Barry Decline video works amazingly! I hope this helps someone else, and TATV is back after COVID. Stay safe.

[@TATVCanada]

I'm still shipping them normally, depending on the gauge you are looking for.

[@russellcarson8768]

Well, the two of us that tried to order never got anything other than emails saying you would get back with us, but we never got an invoice or a shipment. It's your business and you are are well within your right to run it anyway you see fit. We were just really needed the dies, were never able to buy, and therefore had to make other arrangements. I was only passing along the information in an attempt to help others who may have had the same issue and needed a workaround.

[@spyderspic666]

I'm looking for a tool like this but for slitting wads. I checked your website but you didn't have anything or at least I didn't see anything. Are you currently working on any gadgets for slitting wads that will work in a press like this??

[@TATVCanada]

I've tossed some ideas around off the cuff, but I've got so many projects on the go I can't imagine I'll have any time to look at it seriously.

[@spyderspic666]

@@TATVCanada okay. Thank you so much for the reply. I recently ordered some of your gadgets from your website. I'm excited to be able to use them. Thanks again.

[@bruceschlegel8588]

I would like more info like how to get this and the cost Thank you bruce

[@TATVCanada]

Please visit www.tatvcanada.com for details including pricing and shipping.

[@ammoguy8016]

Very entrepreneur of you. Sure your not an American? (Lol) Good work!

[@TATVCanada]

'North' American lol

[@vicvicious13]

How much and how do I order?

[@TATVCanada]

www.tatvcanada.com

[@GunFunZS]

Very nice!

[@TATVCanada]

Thanks, GF. And where have you *been*, man? I've been checking your channel for new videos for a long, long time. Get to work!

[@GunFunZS]

Ironically, I have been at work. I'm a business atty in Yakima, scurrying about helping people with contracts and starting businesses, etc. Hence the lack of videos. I suppose I could try to make a video today that's talky more than prop and setup based. I have a few scripted out, but not shot or edited.

[@GunFunZS]

I just filmed three on saturday, and hopefully you will see the better of them on 'Bacon's channel shortly. One of the others mentions you, but that was just based on subject matter. I need to finish the edit so I can upload that. The final one is just in case of YT shenanigans.

[@TATVCanada]

Well I'm glad to hear you're still in the game; there are fewer and fewer channels worth watching these days... You need to show some more of that Magma caster; that thing is amazing. Have you ever tried modifying any molds for it to make HP's? I've read a lot about it but it sounds like you really need to have your alloy spot on for that to work, and I'm a strictly WW man.

[@GunFunZS]

TATV Canada unfortunately I don't have it anymore . I was building an automated rig for a friend and customer . I'd like to do more in the future .

[@1cheapthrills]

I have a friend that wants one for 45 caliber Black powder leads. Wads are .463 diameter

[@TATVCanada]

Sorry, I only make them in 12g, 20g and 410.

[@Crlarl]

Very cool. Will you be producing them yourself?

[@TATVCanada]

Unfortunately a CNC lathe capable of the tolerances these parts need is out of my price range so I've contracted with another company to manufacture the finished product.

[@mikeforce1173]

Would love to have one !!!

[@TATVCanada]

Let me know if you're interested, still have some left.

[@doncaswell1846]

​@@TATVCanadaI want one

[@captainRock0011]

Congrats...I would be interested in a 45 LC caliber....I would use for Both revolver rounds and 45-70 rifle

[@TATVCanada]

Right now the only size available is 12G, with 20G likely coming down the pipe at some point. I highly doubt I'll ever have a 45 as there just doesn't seem to be any demand for it. If you can find 24 friends who want the same thing, let me know.

[@tobiaskowalski5925]

Do you offer this in 28 gauge ? Or can I order one in that gauge? And what is the cost ?

[@TATVCanada]

No, sorry. Just 12, 20 and 410.

[@DJTMichel]

I would take two, in 12 and 16. Do you also ship to Germany? Greetings Michel

[@TATVCanada]

I ship worldwide, but it is only available in 12G and 20G.

[@moitoi4064]

TATV is that Tout Acheter Tout Vendre?

[@TATVCanada]

Tactical Advantage TV.

[@moitoi4064]

TATV Canada thx. Is your online site operational now? 2 months ago I placed an order but it didn’t seem to work, PayPal did not debit the money either.

[@nickjm37fordel1]

Thinking of putting wads over my powder to help eliminate plastic fouling any thoughts ? PS : agree with Bacon :-)

[@TATVCanada]

It would probably depend on the material you're using. Bear in mind as well that adding an over-powder card like this could potentially alter ballistics and pressure in your shell.

[@AZ762SHOOTER]

Where can I get one? And I also need one sized for 11ga for brass shot shells.

[@TATVCanada]

There is no 11G model available. .410, 20G and 12G are all at www.tatvcanada.com

[@archersfriend]

Any plans for 20 ga. in the future?

[@TATVCanada]

It's all conditional on demand. I need at least 25 of a single unit for it to be worthwhile; if enough people ask for it, I'll make it.

[@markRTFGuns]

I’d like to purchase one of these please. Please message me of cost and shipping. Thank you.

[@TATVCanada]

Www.tatvcanada.com

[@ashash4tube]

Half inch or quarter inch

[@bernellee5514]

Are these still available and how can I purchase

[@TATVCanada]

Www.tatvcanada.com

[@williamfreeman9356]

I would like to buy 1

[@TATVCanada]

Please visit www.tatvcanada.com

[@utahlakewaterfowlassociati996]

What about felt? Also I'd like one in 12ga, what's the cost?

[@TATVCanada]

Www.tatvcanada.com

[@archangel20031]

How about 10 and 11 for those all brass hulls?

[@TATVCanada]

If you can find me 25 people willing to purchase those, including a deposit up front, I'll be happy to make whatever you need.

[@skiMTB]

I don't see a link on where to buy... Please provide...

[@TATVCanada]

Details for my videos including documentation, pricing and contact information are always listed in the description.

[@keystonecountryboy]

would 16 gauge be available?

[@TATVCanada]

Unfortunately there really isn't much demand for them.

[@leviott5855]

Where can I buy a couple

[@TATVCanada]

Www.tatvcanada.com

[@medicms2001]

Fantastic. Curious what the cost will be

[@TATVCanada]

The information is all listed in the description; $65USD plus shipping.

[@johnhunter3120]

@@TATVCanada how do I purchase one?

[@mekkaouimarwouine420]

Can one be made manually?

[@TATVCanada]

One what, sorry? Shot card, or punch tool?

[@oldmanpatriot1490]

Where can I buy one.????

[@TATVCanada]

Www.tatvcanada.com

[@oldmanpatriot1490]

@@TATVCanada sweet thank you

[@avidhuntr]

TATV Canada? Yet it's priced in USD? Why?

[@TATVCanada]

A fair question to ask. It's priced in USD because my manufacturing and brokerage costs are all priced in USD. By keeping the price in the same currency vs CAD, it saves me having to constantly adjust my sale price to match the fluctuations in the USD/CAD exchange rate.

[@HPF-Jensen]

where can i buy it ?

[@TATVCanada]

Www.tatvcanada.com

[@sambartholomew7848]

Price and do u have a 20ga punch.

[@TATVCanada]

Visit www.tatvcanada.com for pricing and details.

[@julienrobin4894]

How much in Canada? Pick up anywhere in Ontario?

[@TATVCanada]

Roughly $12CAD. No local pickup, sorry.

[@michaeldunn150]

Are you still making this product???

[@TATVCanada]

Yes sir; www.tatvcanada.com

[@WaschyNumber1]

Awesome, but i think shipping to uk would be expensive.

[@TATVCanada]

I'd need a postal code to check but it will definitely be more than shipping to Canada or the US.

[@josephtufts7649]

I need that in 20 Guage, 16 and 12

[@TATVCanada]

12 and 20 are both available at www.tatvcanada.com ; there is no 16.

[@jimboyd1962]

What about a .410 bore?

[@TATVCanada]

I did design one, and have a very, VERY few of them left in stock. www.tatvcanada.com

[@gerrymatheson4020]

Great tool...would really like one...but $100 plus $25 s/h... 🤔 yikes...

[@TATVCanada]

I don't like paying more than I have to, either, but I also don't work for free.

[@Glexmechanic]

Do you sell this tools??

[@TATVCanada]

Yes.

[@geraldtakala1721]

28 gauge??

[@TATVCanada]

Sorry, not enough demand.

[@kenguay3566]

Please send me ordering info

[@TATVCanada]

Www.tatvcanada.com

[@gruntspy44]

I want

[@mattlord2906]

Sell it to Lee but keep it as a signature series.

[@TATVCanada]

I spoke with some folks at one major reloading manufacturer, but their offer was comically low.

[@edwardhelms7468]

how much is it

[@TATVCanada]

Www.tatvcanada.com

[@themightylushen]

shipping to united states? 🤔

[@TATVCanada]

Roughly $12USD.

[@jacquestrivie3284]

Existe-t-il en calibre 410 ( 36 )..??

[@TATVCanada]

Oui!

[@jacquestrivie3284]

Merci pour l info..!! Pouvez vous me dire où je peut me le procurer..???

[@peteraugust5295]

would you upload the CAD files?

[@TATVCanada]

Unfortunately I've got about $2,000 sunk into R&D for this project, plus a lot of my time, so no I will not be making the CAD files available.

[@peteraugust5295]

How so? This is a one hour CAD draw. At max. But alright. I wish you luck at selling these. Seems to be a great tool :)

[@TATVCanada]

Generating the CAD files is the easy part. I spent a lot of time measuring and designing, the metal prototypes (of which there were three) were $400 each, and it took many, many hours of testing. That doesn't include all the equipment costs, shipping and importation/brokerage fees.

[@peteraugust5295]

hope it pays out for you :)

[@whatafukndick5660]

@@peteraugust5295 If its so easy you won't have any trouble making your own.

[@myinfo2257]

Need 13

[@myinfo2257]

12 gauge not 13

[@TATVCanada]

Www.tatvcanada.com

[@mathieudery6883]

If only it was in .410 bore

[@TATVCanada]

Find 24 more people willing to buy one and I'll be happy to produce that caliber/gauge.

[@zackturner8059]

@@TATVCanada Count me as one.