14 Budget Friendly Accessories for the Honda Africa Twin

For those with a large budget you can accessorize most motorcycles with all kinds of added functionality, cool gadgets and gizmos, and eye catching bling. But for those of us trying not to run up our credit card bills with shiny objects I am share 14 lower cost accessories that I love on my Honda Africa Twin motorcycle and a couple that... I think I'll skip next time.
1. Givi Crash Bar and Skid Plate system. (~$750)
TN1144 (lowers) amzn.to/3MZ35vM
TNH1144 (uppers) amzn.to/39yqvum
RP1162 (skid plate) amzn.to/3Hurfx3
2. Tusk rear pannier rack system. (~$200) amzn.to/3tHE3dF
3. Custom tool tube (~20)
4. Batzen Windscreen adjuster (~$120) www.batzenparts.com/
5. 3 inch round LED fog lights (~$30) amzn.to/3mWVt2k
5a.Square Switches (25mm ~$10 for 5) amzn.to/3b0ewG5
5b. Light Brackets (not recommended) (~$10) amzn.to/3aVIRFO
6. Shorty clutch and brake levers (~$20) www.ebay.com/itm/253137157321
7. Hand guard protector brackets (~$50) www.ebay.com/itm/144484331017
(not exactly the same as purchased)
8. R&G Racing heated grips (~$70) www.revzilla.com/motorcycle/r...
9. Larger footpegs (~$60) www.ebay.com/itm/223076831279
(not exactly the same as purchased)
10. Brake pedal extension for around (~$20) amzn.to/3HurZ5j
11. Side stand extension (~$12) amzn.to/3O65dTN
12. Seal savors fork guards (~$35) amzn.to/3O3Y06A
13. R&G Racing tank traction grips (~$50) amzn.to/3Quzf5m
14. Harbor Freight Apache 3800 case (~$40) www.harborfreight.com/3800-we...
A couple of items that I would have rather skipped
- Exhuast pipe heat shields (~$30) www.ebay.com/itm/394037371399
- Fork tunnel air dam (~$45)
www.swegotech.com/Forkshield-...
- Brake reservoir guard (~$35) amzn.to/3bblNDn
So there you have it. 14 excellent budget friendly accessories for the Honda Africa Twin motorcycle.
*Music*
::::::::::::::::::::
Music: Rev - Eveningland
Support by RFM - NCM: bit.ly/2xGHypM
• Rev - Eveningland | Ro...
::::::::::::::::::::
Note: Amazon links above are part of the amazon affiliate program where I earn a small commission from your purchases.

[@hussienabukhalil2012]

Big big big 💪 👍 👌 like Thanks for the vedio, I have same bike 2019 blue color 💙 😀

[@PointsUnknownTV]

it is a beautiful bike. Thank you!

[@bruno84]

I have got both the batzen and the fork shield and yes, it too makes a difference. Take the fork shield out and you will get a high(ish) frequency vibration. At least I do.

[@PointsUnknownTV]

That is great feedback! Thank you!!

[@bruno84]

@@PointsUnknownTV thank you for your video!!

[@northeastadventuremotorcycleri]

Not sure why you are Catching flak for the toolbox I did the same thing and it's awesome, I have an actual Givi box on the left side of the bike, and fabricated a 3in PVC tube toolbox on the right side above the muffler but separated by a heat shield and it works just fine

[@PointsUnknownTV]

I think it's just friendly banter. Agreed, tool tube is super handy. I love having the critical tools at hand at all times, but not taking up much space. Don't often need them - but when I do, fully stocked tool tube saves the day.

[@northeastadventuremotorcycleri]

@@PointsUnknownTV yes I couldn't agree more, I do small touring rides off-road and I carry approximately 10 to 15 pounds of tools and odds-and-ends and have always been able to fix anything that's broken while out and about in the middle of nowhere, the people I ride with think it's pretty impressive that I carry some extra necessities

[@rosarioroberto5823]

Greetings Excellent detailed video 🇺🇸🍾🎉🇺🇸 Would you provide me with the link for the tool tube purchase? Keep producing more videos.

[@PointsUnknownTV]

It's just PVC tubing with end caps. But if you want something pre-made, this will work: amzn.to/3feYn2e

[@UncleWally3]

Funny (to me) story. On our way to Mexico I was riding behind my buddy in Big Bend and started being hit by hard shell bugs. Never heard of so many hard shell bugs in Big Bend and they tasted like . . . rubber? Turned out the bottom clip loosened on his carry-tube, similar to the one pictured here. The bottom of the tube was actually shearing off little pieces of his knobbies, rooster tailing them right into my helmet. Shortly after the whole setup let go and the road was full of sundry tools and bits of plastic. I thought it was hilarious . . . not so much my buddy.

[@PointsUnknownTV]

Well, sounds like it's a lucky thing it was just a yard sale of tools instead of a tire failure and wreck. So the moral of the story is to check and make sure it's tight and right every once in a while?

[@coconutz247]

i like everything. can a helmet fit in the tailbox?

[@Shankintime]

No

[@PointsUnknownTV]

No. I usually don't worry about leaving my helmet on the bike for short stops. For longer, I run a cable lock through the face shield. But I pull off my sena comms and throw that in the rear case.

[@ruinerfixxxer]

Great ideas, but I think you screwed the pooch by placing tools in that tube. Should be for skittles storage only.

[@PointsUnknownTV]

I'm more of a jelly beans and cinnamon bears person myself. But those live in the mosko moto tank bag for easiest access. 😁

[@jctv-sq4qd]

Sorry ebay levers are never good, my puig levers felt 10x better then the ebay levers the previous owner had

[@PointsUnknownTV]

That's okay. To each their own. I absolutely love my ebay levers and folks that have rode my AT comment on how great they feel. Maybe I just got lucky. YMMV.

[@jctv-sq4qd]

@@PointsUnknownTV I've just always had/heard bad things about it but I am glad they worked out for you

[@PointsUnknownTV]

Yeah. But now I want to try those Puig levers!!

[@TheMrB]

Sorry, but you seem to be covering your bike with cheap crap from China. I have bought those Hangard covers, and when the bike fell over they just snapped. Recommending this junk is not cool

[@PointsUnknownTV]

I appreciate your opinion. They've worked great for me.