$1400 All White PC Build / JONSBO 31 D MESH SCREEN / RX 7600 / RYZEN 7 5800X3D

[@JoshuaHereGTM]

New update, the RX 7900 XTX is finally here and in the case! Check it out here. www.youtube.com/@JoshuaHereGTM/community

[@JoshuaHereGTM]

Just wanted everyone to know there has been an update to this video. Updates include; Thumbnail, Title, Description, Links. Note: In response to the comments on the original title of the video, "$2000 All White PC Build / JONSBO 31 D MESH SCREEN / RX 7600 / RYZEN 7 5800X3D" I was including the peripherals in the price and rounded up, this skewed the data. As a result I have linked a detailed list of ALL parts used and how they break down in the overall price/configuration. I apologize for the confusion and hope this transparency helps correct the error. Thank you all for your comments!

[@superp25]

Really nice! Beautiful build. I'm about to build in the same case. This was helpful.

[@josephiram9019]

Great Job Ter Stegen!

[@Czar.Nikolai]

It would have been nice to show more cable management

[@JoshuaHereGTM]

Yes I apologize, I went back later a couple times and zip tied some things up off camera but I would still like to clean it up some more honestly.

[@Czar.Nikolai]

@@JoshuaHereGTM I’m building my first PC with this case and I’m having trouble with the cable management. Any tips for this case?

[@JoshuaHereGTM]

Start with your largest cables first and run them along the bottom channels such as the power cable an the HDMI cable for the front screen. Where the case is beveled around the channels you should see small elongated holes these are good mounting points for zip ties. Next rout your power cables for the mother board and GPU again using the channels and mounting points. Last plug in your fan cables and that should help clean it up.@@Czar.Nikolai

[@lordrefrigeratorintercoole288]

i seen these cases in my local store a couple of weeks ago. The are gorgeous, but its a deal breaker for me because they dont have optical drive slots. I like my blurays.

[@JoshuaHereGTM]

Yeah, that is a downside, I have to use my external blueray drive. Lots of manufacturers are moving away from disk drives.

[@cooldaddyslick6869]

Most cases now don't come with them. Just gonna have to go external and set it on top

[@jms1401]

perfect fan orientation

[@tomzostromu]

well ... I'm pretty sure on side of the fans is wrongfully oriented 😀

[@JoshuaHereGTM]

Yes, the side (rear fan) is reversed on purpose. The three fans on the bottom are intakes the three fans on top with the rad are exhausts and the one fan on the back of the pc is also an intake. This is optimal airflow in this orientation with positive pressure for lower dust build up bringing fresh air in for the rad. See this video for explanation on why this configuration is optimal. @@tomzostromu kzbin.info/www/bejne/eJKZqGaHmdOKeNk

[@Hasan.0000]

Really cool build

[@OCTANEsDealer]

Wanting to buy this build but don't know anything about building pc's, you should do a detailed in depth tutorial. Would help alot thx

[@ShaunaJagan]

Amazing Build! I'm plaining on doing my next build in a D31 as well. May I ask: Do they include an extra part if I, for some reason, wanted to remove the screen?

[@JoshuaHereGTM]

@@ShaunaJagan there is a mesh panel if you want to take the built-in screen out and just have a full mesh front.

[@JoshuaHereGTM]

@@ShaunaJagan it’s included in the box

[@bill0804]

Nice!

[@JoshuaHereGTM]

Thank you so much.

[@kib0263]

Arctic Liquid III coolers in that case? can it fit in this case?

[@EdwardNigma950]

Is it possible to fit the front fan with 3*120 mounted on top and on bottom? I think about put the fan on front, to spit out the hot air frop graphic card

[@chunkynugget]

I want to fit a full size ATX mb in that case. I guess some cutting will be required.

[@JoshuaHereGTM]

there is a version of the case just for a full sized mother board.

[@chunkynugget]

@JoshuaHereGTM yeah, the D41, but I like small cases.

[@JoshuaHereGTM]

@@chunkynugget In that case have you thought about the Thermaltake tower cases? they seem to have a small footprint but can support a full motherboard?

[@SpoonHurler]

​@@chunkynuggetD41 is pretty small for a full atx case

[@JoeMaranophotography]

With the controller do the fans have to all be set at the same speed? Does it go to cpu fan or chassis fan header?

[@JoshuaHereGTM]

there are several headers you can connect to for individual control. In fact I have tree different croups so I can optimize air flow.

[@JoeMaranophotography]

@JoshuaHereGTM Ah cool. I only have 4 fans in my case (NR200P Max) so I've just gone with 2 ARGB fans daisy chained to the ARGB header and will add a strip to finish it off at the bottom :]

[@Choconuss]

niceee, so what level did you put in the PSU cage?

[@arkouda1735]

if i were to use a HDD in there as well, where would that fit at?

[@JoshuaHereGTM]

There is one HDD drive slot on the back side of the motherboard where all the cable routing is. See time marker 15:27 in video. See also case specifications sheet at www.jonsbo.com/en/products/D31.html

[@rontech34]

I want that same setup

[@007kicsicsira]

What program is running on the LCD display? Which displays the data like this.

[@JoshuaHereGTM]

AIDA64

[@007kicsicsira]

ty bro! @@JoshuaHereGTM

[@linuskvarndal8212]

Is a desk build cmming?? cuz that drawr looks painfully unergonomic and not deep enough!

[@JoshuaHereGTM]

No I have a desk already i just didn’t have it setting there yet.

[@BakersBakeryTTV]

why is youir exhaust fan inputting?

[@JoshuaHereGTM]

From previous comment. Yes, the side (rear fan) is reversed on purpose. The three fans on the bottom are intakes the three fans on top with the rad are exhausts and the one fan on the back of the pc is also an intake. This is optimal airflow in this orientation with positive pressure for lower dust build up bringing fresh air in for the rad. See this video for explanation on why this configuration is optimal. @tomzostromu3838 kzbin.info/www/bejne/eJKZqGaHmdOKeNk

[@EdwardNigma950]

Do you know, that you look exactly like russian interviewer Yuriy Dud?

[@TheRudeboy102485]

Subscriber #62 👍 #36

[@WaterMelon-rd1jw]

날두 형 하이

[@otis670]

CAN you build me one

[@JoshuaHereGTM]

I don't build PCs for other people but I know some people who could. And I would be happy to help you if you built it yourself.

[@giokilldagram1233]

Sfx psu ????

[@jehhh7794]

GPU BOTTLENECK!!!

[@JoshuaHereGTM]

This is correct, the 7600 was only temporary and has now been replaced with the 7900xtx. (It finally came in.)

[@jehhh7794]

@@JoshuaHereGTM it fits, surprisingly!

[@JoshuaHereGTM]

I had to move the power supply up a little but it got in there pretty easy. @@jehhh7794

[@marcin2638]

Beautiful build but pls buy a desk xD

[@JoshuaHereGTM]

Haha I've since bought a desk. 🙂

[@nudel217]

Why is he so zesty

[@Schluggaluggas]

honestly, spend the extra 150 dollars to upgrade to a rx 7800xt. you will thank me later

[@idvoro]

7600?????????????????????????????????????????? in a 1400 dollar build?

[@Da.Diddler]

Yah buddy got scammed lmao. $1400 could get u a 4070 or 7800 xt with a 7700 and a decent matx mb.

[@DryUrEyesMate]

For the love of god pls buy a bloody mic, you video is un watchable on a phone.

[@sstier48]

No one should be building an am4 system rn (or within the last few months) makes 0 sense rn

[@JoshuaHereGTM]

There are many reasons why someone may still chose to go with the AM4 (Dead end) platform. 1- Price (especially DDR4 RAM compared to DDR5). 2- Availability, many years of parts available for AM4. 3- Stability, see listed videos on motherboards overvolting and popping AM5 chips. Not to mention drivers. Same reason I use windows 10 instead of 11. 3a- kzbin.info/www/bejne/l6Onopuugp2Kpck 3b- kzbin.info/www/bejne/oZq3n5qsq6lomqs 4- Drivers, AMD isnt the best with drivers but making great strides. Final Note: There are many reasons why people chose the parts they do, and not everyone wants or has the know how to deal with the teething issues of the latest and greatest platforms. In the end, as long as they are happy with the product and it suits their needs that is all that really matters.

[@BigLebowski1337]

So... why would you use 4 DDR5 modules and technically halve your speed on the bus to 3600?... since you say it is a 1400$ build.. I'd gone with 2 modules of 16 or 32.