15. UplinkFast BackboneFast

  Рет қаралды 11,106

System Engineer

System Engineer

Күн бұрын

Пікірлер: 15
@bintehawa7712
@bintehawa7712 2 жыл бұрын
Superb sir
@CarlosSousa-wn1sn
@CarlosSousa-wn1sn Жыл бұрын
thank you
@leoxu3620
@leoxu3620 5 жыл бұрын
in backbone fast, switchB will send RLQ to determine the root bridge is alive first. it is necessary since root switch might be dead that’s why another switch is declaring it is root. while generally it is well explained.
@kingsleymohammed9627
@kingsleymohammed9627 3 жыл бұрын
i guess it's pretty off topic but does anybody know a good site to watch new movies online ?
@jairoronan6804
@jairoronan6804 3 жыл бұрын
@Kingsley Mohammed flixportal
@kingsleymohammed9627
@kingsleymohammed9627 3 жыл бұрын
@Jairo Ronan Thanks, signed up and it seems to work =) I appreciate it !!
@jairoronan6804
@jairoronan6804 3 жыл бұрын
@Kingsley Mohammed No problem =)
@VandersonT_
@VandersonT_ 5 жыл бұрын
What about the RLQ request and reply when using Backbonefast? Still there is more to learn on those technologies. Thanks anyway, still helpful
@prince-bd1so
@prince-bd1so 3 жыл бұрын
_best explaination_
@saifmhajar4154
@saifmhajar4154 6 жыл бұрын
very clear thanks alot
@damienbaker3955
@damienbaker3955 6 жыл бұрын
Does UplinkFast bypass the Max Age Timer as well ?
@hilalsaeed7932
@hilalsaeed7932 9 ай бұрын
In unlink fast, max age timer is not in play since uplink fast only works for direct link failure.
@Ogmeil
@Ogmeil 6 жыл бұрын
I have a question for backbonefast. So in your scenario, Switch-A is Root Bridge, Switch-B has 1 RP toward SW-A and 1 BLK port toward Switch-C, Switch-C has 1 RP toward Switch A and DP to SW-B. So link between Switch-A and Switch-C is down. How does Switch-B realize that, Switch-C is recalculation for a new Root Bridge. Before link between Switch-A and Switch-C is down, Switch-B's is able to received BPDU from it's blocking port. How does Switch-B know that, Switch-C is need recalculation for RB? Is there any special BPDU send by Switch-C to Switch-B before link down and after link down?
@dua-dhikrseries4921
@dua-dhikrseries4921 5 жыл бұрын
As soon as the link between A and C is down..switch c starts sending himself as root bridge (assuming c has better bridge id)..now switch B will not treat this as superior bpdu..but as the port is in blocking state, it has to wait for max age (20sec) to come out of blocking state.
@dua-dhikrseries4921
@dua-dhikrseries4921 5 жыл бұрын
To answer specifically : 1.before link down bet A and C,A is the root bridge. 2.after link down ,C sends bpdu with himself as root.
16. Rapid Spanning Tree Protocol 802 1W
12:31
System Engineer
Рет қаралды 41 М.
PortFast + BPDU Guard | STP Optional Features
11:28
CertBros
Рет қаралды 140 М.
Try Not To Laugh 😅 the Best of BoxtoxTv 👌
00:18
boxtoxtv
Рет қаралды 7 МЛН
Каха и лужа  #непосредственнокаха
00:15
这是自救的好办法 #路飞#海贼王
00:43
路飞与唐舞桐
Рет қаралды 126 МЛН
CCIE Topic: 1.1e PortFast, BPDU Guard, BPDU Filter
14:08
Charles Judd
Рет қаралды 7 М.
8. Serial Interfaces  The Clock Rate
7:40
System Engineer
Рет қаралды 11 М.
153 Root Guard
10:57
network rider
Рет қаралды 2,6 М.
11. How STP Adapts to Network Failures
15:00
System Engineer
Рет қаралды 12 М.
BONUS TRAINING: EtherChannel Theory and Configuration
25:56
Kevin Wallace Training, LLC
Рет қаралды 22 М.
3. Switches  Flooding Frames
8:53
System Engineer
Рет қаралды 13 М.
20- Uplink Fast and Backbone Fast
40:41
Abeer Hosni
Рет қаралды 2,3 М.
CCIE Topic: 1.1e Loop Guard and Root Guard
11:43
Charles Judd
Рет қаралды 12 М.
Spanning Tree Protocol Explained | Step by Step
20:12
CertBros
Рет қаралды 749 М.
Try Not To Laugh 😅 the Best of BoxtoxTv 👌
00:18
boxtoxtv
Рет қаралды 7 МЛН