We’re in some of the final repairs this week and getting close to wrapping this up . We’ll be throwing dirt in no time !
Пікірлер: 70
@chelemichele15244 жыл бұрын
👋 there little one😁😁 your dads words..😆 Your son will love it when completed. Have a wonderful evening 🌻🌻🌻
@SunnySlopeHomestead4 жыл бұрын
chele michele 😊😊😊👍 thank you
@amoore87614 жыл бұрын
But you are having fun. And we enjoy watching.
@SunnySlopeHomestead4 жыл бұрын
It’s a life style that’s for sure hahahaha
@squirrelhillfarm90704 жыл бұрын
You have more patience than I do. It would be setting out back here for target practice
@SunnySlopeHomestead4 жыл бұрын
Squirrel Hill Farm oh trust me it’s been tested 😆
@patt45994 жыл бұрын
Really enjoy watching you working on this. Used to ride one, but had to give that up.
@SunnySlopeHomestead4 жыл бұрын
Patt Anne she coming along nice I can’t wait to show everyone the finished product
@skyz31604 жыл бұрын
I'm impressed with the man in the "know"!
@SunnySlopeHomestead4 жыл бұрын
Sky Z 👍👍👍😃
@crowgirl13264 жыл бұрын
Great job. Your son will love this "toy".
@SunnySlopeHomestead4 жыл бұрын
Bonita Crow thank you 😊 I can’t wait to show everyone the finished product
@Aron95932 жыл бұрын
So I'm working on waht looks to be the same exact one. I'd love to pick your brain on a few things. It was my grandfather's and now it's my new refurbishing project, I just finished a boat and I have another boat and the moto 4 and a coin toss determined that I take a break from boat refurbishing lol
@SunnySlopeHomestead2 жыл бұрын
The four wheeler would be a easy winter project for sure. I’ll help answer any questions you have 👍👍👍👍
@Aron95932 жыл бұрын
@@SunnySlopeHomestead so when I'm trying to start it I get the green light and then I just get a click each time I push the start button?
@badboo19794 жыл бұрын
That's looking Good!!!
@SunnySlopeHomestead4 жыл бұрын
badboo1979 thanks bud
@tammysarrazin70784 жыл бұрын
nice job im loving this rebuild
@SunnySlopeHomestead4 жыл бұрын
tammy sarrazin thank you ... I can’t wait to show everyone the finished product
@MrJedediaholsen4 жыл бұрын
Sludge looks like it was from water they sucked in motor .shavings look like brake in shavings to me .They probably never changed the oil from original start up .probably just added oil to it when it was low .But that's what the 🧲 is for to grab all the shavings. Looked like you got it running pretty good.
@SunnySlopeHomestead4 жыл бұрын
Blues man guitar for you tubers clean all that out and she purrs like new them changed again after some hard ride time and came out clean 👍👍👍
@PaullaWells4 жыл бұрын
I could see that the oil was super bad even on camera. I've helped to clean up some bad oil in my time, but I have never seen oil that is like mud. That's just crazy how bad that stuff was. You might have like to have that plow when it snows to plow your driveway. 😉 Love how the rims turned out. They look super dope! (That's how the kids say that these days, right? LOL)
@SunnySlopeHomestead4 жыл бұрын
Paulla Wells I plan on putting a plow on my UTV may be regretting selling the plow I thought of that too lol
@PaullaWells4 жыл бұрын
SunnySlope Homestead - Oops. Well, at least get brand new then. No worries with new usually. 😉
@AuntieAnn4 жыл бұрын
Good morning 😃 OH wow that was nasty oil 😳 The rims turned out awesome
@SunnySlopeHomestead4 жыл бұрын
Auntie Ann they did I couldn’t be happier sep my back one look nasty now 😆😆
@AuntieAnn4 жыл бұрын
SunnySlope Homestead Hahaha it’s the domino effect
@mariesplace95474 жыл бұрын
It's coming together... I would have to label diagram All of the parts to get it back together. Ahh alittle sweetie at the end 🤗... she's still eating 😆
@SunnySlopeHomestead4 жыл бұрын
Marie Dunn oh trust me I stand back and scratch my head at times lol
@francisbrackney20613 жыл бұрын
Great videos man. Thank you. I really love these kind of old machines, If you were to run a quart of dextron transmission fluid mixed in with the oil for a while it would help clean out all that sludge, and then give it another oil change with some good 10-40 . Transmission fluid has about 3 times the detergent of engine oil and and it does a excellent job of cleaning aluminum. Obviously that is one reason why it is use in aluminum transmissions
@SunnySlopeHomestead3 жыл бұрын
Great to know for future projects that will require the same attention. 👍👍👍
@DuyanFarms4 жыл бұрын
Hi SSH Family. Nice project so far. You mentioned "Old Man Strength". Well, OMS doesn't kick in until you get into your 50's and then in order to conjure up said strength you need to have the correct expletives to go along with it. See "A Christmas Story" for an example. Here's one of my favorites. "Oh, for cripes sake, open up the damper will ya? Who the hell turned it all the way down? AGAIN! Oh, blast it! Poop flirt, rattle crap, camel flirt! You blunder frattle beak struckle brat! Of a womp sack butt bottom fodder..." Cheers and God Bless. ~Mike and Ester~
@SunnySlopeHomestead4 жыл бұрын
Duyan Farms 😆😆😆 o love this comment ... I have wait until I’m 50 😳
@nathanhartswick99554 жыл бұрын
I Love These Videos
@SunnySlopeHomestead4 жыл бұрын
Thank you , we are gearing up to start a 1971 Chevy truck build 👍👍👍👍
@mikeking80593 жыл бұрын
If it was snorkeled it was probably swamped.
@SunnySlopeHomestead3 жыл бұрын
It was best that’s for sure
@WayneWatson14 жыл бұрын
Ouch, metal. Not good. Dang. Hope you don't have to end up rebuilding it. Yep, never fails when you got your hands covered in stuff 🤣 Bye 😁 God bless you all
@SunnySlopeHomestead4 жыл бұрын
Wayne Watson we’ll ride until she gives them rebuild it 👍👍👍
@thomatyessir91234 жыл бұрын
Most of the time it’s just clutch shavings..
@SunnySlopeHomestead4 жыл бұрын
I never thought of that 🤔 but it makes sense
@thomatyessir91234 жыл бұрын
SunnySlope Homestead my old Yamaha kodiak 400 always had shavings in it, and it worked great and never let me down great find tho man!
@prestonwinfrey77313 жыл бұрын
They 10s but I keep 'em clean. Bruh!
@SunnySlopeHomestead3 жыл бұрын
Hahhaha 😆
@Treadstone20063 жыл бұрын
lol love that reference
@dickelbuck14 жыл бұрын
🇺🇸 Grunt Style 🇺🇸
@SunnySlopeHomestead4 жыл бұрын
I love their stuff 👍
@shaunhammer6344 жыл бұрын
Have a 85 atv someone stole it and cut all the wiring so dealing with that now
@SunnySlopeHomestead4 жыл бұрын
You can a complete wiring harness on Amazon I think. I was dealing replacing bad wiring and was able to buy the ignition and control module And harness 👍
@danieladame8894 жыл бұрын
Where can I find some parts for that bike
@SunnySlopeHomestead4 жыл бұрын
Daniel Adame I hunt for them on line and amazon
@tinadouglas28384 жыл бұрын
Hi. I subscribed. I like your videos. Hugs.
@SunnySlopeHomestead4 жыл бұрын
Thanks Tina here to more great videos lol
@timmehnz4 жыл бұрын
yamaha's are pretty hearty for running on crappy oil,iv had to do all this on my early yfm200 (moto4)
@SunnySlopeHomestead4 жыл бұрын
I’m impressed for sure and believe they don’t make them like they used to 👍👍👍
@tommygleason2384 жыл бұрын
My 225 was running on the original factory oil until last fall
@frogman78063 жыл бұрын
you need some sea foam
@SunnySlopeHomestead3 жыл бұрын
I use that stuff but usually it’s use with hopes of not having to take apart a carb. Always wind up working on the carb anyway lol
@jasenbrown40574 жыл бұрын
How well did replacing those pins settle down that wheel wobble?
@SunnySlopeHomestead4 жыл бұрын
Completely gone , cheap parts and big results 👍👍👍
@koumbayya11902 жыл бұрын
what type of paint did you use?
@SunnySlopeHomestead Жыл бұрын
I use a plastic paint from the hardware store nothing special
@TrehanCreekOutdoors4 жыл бұрын
Using gas as a solvent is a terrible idea for several reasons, not the least of which is safety. I see a much better use for that gas. If I had pulled that much metal out of the motor, I probably would have pushed the entire bike to a safe outdoor area, doused it with the old gasoline, set up my video gear, and produce a great "I set my Moto 4 on fire!" video. LOL.
@SunnySlopeHomestead4 жыл бұрын
Trehan Creek Outdoors hahahha yeah she running strong and I’ll keep an eye on it. Gas is all I had at the time but I tend to use break wash
@TrehanCreekOutdoors4 жыл бұрын
I just got home about an hour ago with a 1985 Moto 4 ATV that I bought for a pretty low price. It cranks and runs fairly well but I am going to do a full inspection and put it in good mechanical condition. I'm enjoying watching your videos on your 1986 model as they will help me with my overhaul. I've already got a 1997 Yamaha Timberwolf. Those older bikes were built like tanks and just keep on going!
@randyphilbrick15902 жыл бұрын
Can you weld on a head
@SunnySlopeHomestead2 жыл бұрын
You can aluminum weld heads to repair cracks then machine the surface. If you are asking about cooling fins yes , a aluminum welding spool gun will work well for this. The key is cleaning anything off the surface like oils and such 👍👍👍
@4godliv4 жыл бұрын
So the metal shavings mean the engine is off? They are coming from the pistons? You are meticulous, that's how you are gonna make this work.
@SunnySlopeHomestead4 жыл бұрын
Well run it until it goes then rebuild or go bigger 👍👍👍👍