#16 Eco resin pendants with PET tape - A creative beginner project

  Рет қаралды 2,706

GinrinCreates

GinrinCreates

Күн бұрын

Пікірлер: 25
@salonigandhi1608
@salonigandhi1608 10 күн бұрын
They all look so beautiful and elegant...love them all...thanks for sharing 😊
@sudhagupta4458
@sudhagupta4458 26 күн бұрын
Beautiful eco resin earrings,loved the washi tape graphics on these jewelleries 💜
@GertCreates
@GertCreates 27 күн бұрын
very elegant looking, love the white with a splash of colour.🩷🩷🩷🩷
@justtere
@justtere 14 күн бұрын
Love the bird! ❤❤
@SmartyHarty
@SmartyHarty 2 күн бұрын
I really like all of these pendant's, the kingfisher is my fav. Great idea and thank you for sharing
@ginrincreates
@ginrincreates 2 күн бұрын
@@SmartyHarty Thanks, Smarty! I like the kingfisher too. I'm in love with that whole roll of PET tape. 😍
@colleenbudde2366
@colleenbudde2366 13 күн бұрын
They are all lovely ❤
@bylen8589
@bylen8589 26 күн бұрын
I love the white resin. It looks like pieces of fine china
@tanyalake3640
@tanyalake3640 10 күн бұрын
Thank you❤
@KirnixCreations
@KirnixCreations 25 күн бұрын
Really stunning pieces, I love your choice in tapes! Just wish I could cut as neat as you. Amazing job :)
@KitschyKittenStudio
@KitschyKittenStudio 26 күн бұрын
These are really nice!
@SharonGiampino
@SharonGiampino 14 сағат бұрын
Your work is beautiful
@ginrincreates
@ginrincreates 11 сағат бұрын
@@SharonGiampino Thank you, Sharon. ❤️
@jubis-juj
@jubis-juj 3 күн бұрын
Try using tape to separate the sticker from its backing. Works for me. Your ideas for jewelry are lovely.
@ginrincreates
@ginrincreates 3 күн бұрын
@@jubis-juj Good idea! I'll try that next time. The sticky mat works well, usually. Mine is old and has lost much of its stickiness now, though. I guess it's time for a new one! Thanks for watching, and also for your tip. ❤️
@BassResinator
@BassResinator 26 күн бұрын
Impressive
@SelenesCreationsByTheSea
@SelenesCreationsByTheSea 24 күн бұрын
These are just awesome!! glad this showed up in my feed .I think my favourite is well al of them hehehe i can't pick just one , A huge thumbs up and a newsubscriber from me. Gave me so many ideas as i thoought these might be too fragile and break easily. Can't wait to see what you come up with next time . Much love from Australia
@ginrincreates
@ginrincreates 23 күн бұрын
Thanks so much! I'm glad you enjoyed them!
@Vsv1224
@Vsv1224 19 күн бұрын
These are all so delicate, dainty and pretty. I love each of them! I was wondering if you seal the back and sides with something, and what that may be. Thank you so much for the inspiration and quick tips.❤❤❤t
@ginrincreates
@ginrincreates 19 күн бұрын
Hi there! Thanks for your comment. To answer your question, I didn't seal these in particular, but I usually seal ceramic resin with butcher block wax. I used to use a matte sealant made by Mix2Mold, and that works pretty well also but tends to show brush strokes, so I do prefer the wax. :) I hope this helps, friend. If you have any other questions, I'm here for you.
@Vsv1224
@Vsv1224 18 күн бұрын
@ yes, it does. Thank you!
@tanyalake3640
@tanyalake3640 10 күн бұрын
Can you make the mix thicker so it pours slower and or use the bottles with the needle?
@ginrincreates
@ginrincreates 10 күн бұрын
Absolutely! Mix2Mold is quite forgiving on how thick or thin you decide to mix it. If you mixed it thin enough to go in a needle bottle there may be curing time issues, though. I've never tried thinning it quite that much, so I couldn't say for certain. I know my thinner mixtures have taken longer to dry. If you do try using it in a needle tip bottle, I hope you'll come back and let me know how it goes. Id love to hear your insight. Normally I do pour a little neater than this, but I have osteoarthritis in my hands and some days are worse than others. But when the brain says craft, we craft! 😂
@lisacapers5853
@lisacapers5853 7 күн бұрын
These sooo nice, how much powder resin did you make? Pls tell ❤❤❤😊
@ginrincreates
@ginrincreates 6 күн бұрын
Thank you very much! I'm honestly not sure. When I mix up my ceramic resin, I usually just eyeball it and make more than enough. I always keep a spare mold or two on hand for extra leftover resin. Also, the recommended ratio of Mix2Mold to water is 3:1, but it's very forgiving, and you can make it thicker or thinner as needed, which is nice.
#611 13 Different UV Resin Pendants Can Become Your Best Sellers- Even Beginners Can Do!
42:54
We Attempted The Impossible 😱
00:54
Topper Guild
Рет қаралды 56 МЛН
Support each other🤝
00:31
ISSEI / いっせい
Рет қаралды 81 МЛН
Une nouvelle voiture pour Noël 🥹
00:28
Nicocapone
Рет қаралды 9 МЛН
VIP ACCESS
00:47
Natan por Aí
Рет қаралды 30 МЛН
Let’s Make SNOW GLOBE Style RESIN COASTERS with LET’S RESIN! ☃️☃️☃️
27:00
#14 How to Make a Snowglobe Frog (and Resin Eyes)
30:40
GinrinCreates
Рет қаралды 2,2 М.
Why Resin Paper Is About to Change Your Crafting Forever
16:40
PERFECT results from these stunning decals
20:30
Claire’s Crafty Corner
Рет қаралды 8 М.
307. A BRAND NEW Resin Art IDEA That ANYONE CAN DO!
36:33
Daniel Cooper
Рет қаралды 64 М.
#678 New "Into Resin" Ornaments For My Family In Italy!
17:01
Glitz N' Glitter By Michelle
Рет қаралды 4,7 М.
Mastering UV Resin Made EASY!
21:10
Mason Creations etc.
Рет қаралды 8 М.
Creating a magical scene
16:21
Claire’s Crafty Corner
Рет қаралды 9 М.
#21 I made a crystalline hedgehog mold. Let's test it out!
5:30
We Attempted The Impossible 😱
00:54
Topper Guild
Рет қаралды 56 МЛН