1937 Ford Sedan Delivery Hot Rod Floors and Rockers

1937 Ford Sedan Delivery Hot Rod Floors and Rockers
This video I get the rockers and main floors mocked up and ready for welding. I also get the cowl supports made welded and bolted down. there is also a short video of my son Shepard drifting his cozy coupe around the house haha make sure you watch the whole thing!
Merch: www.rhodealliance.com
Traditional Hot Rod KZbin Family
make sure you check these guys out!
‪@IronTrapGarage‬
‪@ThisOldHotrod‬
‪@WiredCustomsSpeedShop‬

[@tazgee6609]

I admire you young man, you’ve apparently had a good mentor as you have gained “talent” that has been lost over the years! Not many young men care about “old iron” today! You show patience and love for the cars of yesterday. I’m not bragging on you, mind you, I’m just saying that you’re good….Don’t want to give you the Big Head!!!!!!

[@RACGARAGE]

I have a small head so a little boost might make it fit in my hat

[@ericwhiting100]

Drifting the Coupe around the house brought a smile to my face. The delivery is coming along nicely.Thanks for taking us along so we can all learn together.

[@grubsrust299]

Man, after watching that drifting intermission i started to think a bit and you gotta build that kid a drifting hot rod!!! Myabe a old pedal car with a power wheels motor :V

[@pappabob29]

Nice !!! A little "Drifting" around the homestead!! 👍✌️😜 That 37 is turning into a really solid piece!! Such a major improvement from where you began!!! Bravo !!! You should go inside so satisfied and content !! 👍👍👍🛠⚙️🗜🪛🔩

[@davehhatesyou]

Uncle Dave loves Shepards cameos

[@TheDiamondback73]

That is going to be one solid ride! Great work! Got a good chuckle from the drifting!

[@Ecosse57]

getting ready for the freedom factory! love the work you're doing man.

[@WiredCustomsSpeedShop]

Your son tearing it up was the best part haha

[@MF-rn5os]

Another great video. I missed out on a 30 Tudor last week. I will find another one.

[@floridian7143]

Again, nice clean work and good thought process! Thanks for sharing

[@WiredCustomsSpeedShop]

Thanks for the shoutout!

[@stoveboltlvr3798]

Love the kind of stuff that you work on. I also think you should have way more subscribers than what you currently have. These are my idea of traditional hot rods. Keep the videos coming!

[@frankschwartz7405]

Love the car, love the build. Nice work. More more!

[@harrycatrell1471]

Thanks for sharing, Travis! I think it's coming out beautifully! The sedan delivery work was cool, and all...but...I think the "drifting demonstration" was the star of the video! Adorable Son! Have a great week! Be safe!

[@dennisd4452]

full size cot in the back and a bench seat in the front... home from home.

[@terrancesweeney1870]

Soon your son will be out in the garage helping you!

[@johnmorrison1133]

You're making great progress.

[@timmaccowan]

Man Im a FAN...... you do some very kool. work. Keep the videos coming. Im watching them all now.

[@RACGARAGE]

They get worse the older they are haha, I’ve improved

[@timmaccowan]

@@RACGARAGE I have learned something in every video so far......They do help. Lucky your not too close to me......I have a 29 buick truck ish rat rod Im working on. This all helps.

[@davemoulding8799]

NO HE IS GOOD PERIOD TALENTED

[@terrancesweeney1870]

Great fab work Travis!

[@MrBenh1976]

little man said him getting it him was a pro driver

[@tomwilkinson2184]

Great job Travis ! You can see the quality of your work !!;

[@tedcorey3054]

Nice work as always.

[@1936fordcrazy]

Great work as always!

[@whatsoutthere6822]

Looking good!

[@60chevyjim]

You are doing a great job Travis , it is looking really good . keep up the good work !!

[@dantomlinson4407]

I love this build!

[@dantomlinson4407]

The Drifting is "Great"

[@michaelguinn5736]

When I watch these video's, I see a thumbs down, who is giving these??!! Are they professional fabricators from big name shops?? Or are they armchair fabricators??? Anyway, keep doing what you are doing...be safe, God Bless!!!

[@RACGARAGE]

Thanks for the nice words man! I think it’s just folks who don’t like me telling them to like the video so they dislike it haha 😂 it doesn’t matter either way so not a huge deal lol

[@michaelguinn5736]

@@RACGARAGE good to hear, their will always be haters... people that just hate life!!! So they expect you to do the same!!! Be safe! God Bless!!!

[@steveturetzkin9829]

grent video travis !

[@samuelbacon1596]

Travis could you give me the link to that tool that you use in the drill the holes with the shoulder . The. Hole,,,,.so You would not have a mushroom on the brace. Love the work. Did you make Stafford swap meet and Thompson. At the raceway. ?????? Junkmando

[@fastback1245]

Perfecto very nice

[@johnkelly6942]

Did you check to see if the door upholstery panel goes down all the way to the bottom of the rocker? You need clearance so you can install that panel and still close the door.

[@davemoulding8799]

You need to start using weld threw primer on all your welding areas to protect all hidden bare metal area’s or it just going to rust out again use the copper weld threw

[@RACGARAGE]

I’ve tried that stuff before and it doesn’t work well with tig welding. Maybe I bought a dud?

[@davemoulding8799]

@@RACGARAGE possible , then start painting all your bare metal on the back side with spray cans of eching primer from Lowe’s or Home Depot I used it a lot same as buying the 3m stuff

[@fredflintstoner596]

Mrs Richards: "I paid for a room with a view !" Basil: (pointing to the lovely view) "That is Torquay, Madam." Mrs Richards: "It's not good enough!" Basil: "May I ask what you were expecting to see out of a Torquay hotel bedroom window? Sydney Opera House, perhaps? the Hanging Gardens of Babylon? Herds of wildebeest sweeping majestically past?..." Mrs Richards: "Don't be silly! I expect to be able to see the sea!" Basil: "You can see the sea, it's over there between the land and the sky." Mrs Richards: "I'm not satisfied. But I shall stay. But I expect a reduction." Basil: "Why?! Because Krakatoa's not erupting at the moment?

[@Bigskyguy56]

Great work. Coming along nicely. What brand is your chamfer bit? Stay Real Rick

[@xunchicrewx]

dddooooorrriifffftttoooo!!!!!

[@fueladdictiongarage7048]

👍🏻

[@jimsoehlman2047]

would you attempt what you're doing with a mig welder?

[@RACGARAGE]

You can for sure I just prefer the quality of a tig weld. And planishing out mig welds are almost impossible

[@joedurning3275]

Well I was just gonna add to your matrix's by saying "you suck", but there is something I want to ask. :) I need you to teach me how that "Finger snap cleans your workbench" trick. I've been a woodworker for a long time and years ago I built a workbench that's 66" X 40" X 42" tall. I welded a frame from 2" square steel stock and for a top I put two sheets of pressure-treated 3/4" plywood. (Yes, this was back in the OLD DAYS when wood was cheap) I even put 3" locking casters on it in case I needed to move it.. ... Anyhooo, over the years I keep pushing STUFF off to one side as I'm working and now I'm doing the bulk of my work on about a two square foot spot in one corner. I sure would love to have a completely CLEAN and CLEAR workbench but I just cant seem to figure out where to start ... Any helpful suggestions?

[@RACGARAGE]

Just get your bin ready and throw everything out lol I’m sure you don’t use 99% of the stuff on there because the pile hasn’t moved lol

[@joedurning3275]

@@RACGARAGE I wish I could post a pic of my workbench... because you have no idea! LOL