1939 Solar Thermal Power

[@lindastone6868]

Walking with an uneven stride, now that's staggering!

[@ThinkingandTinkering]

lol

[@bikerfirefarter7280]

Walk this way. ?

[@exhumedlegume8870]

If you walk without rhythm, you won't attract the worm. ;)

[@drillerdev4624]

​@@exhumedlegume8870 listen to the sound of my voice

[@FinGoju]

That flat panel Stirling engine was awesome! Thank you Robert once again for bringing up these innovations. I need to build a sand battery and put that kind of flat stirling on top of it to have some power during the night. We are now pushing around 30 kWh altruisticly to the grid on a sunny day with solar panels...

[@ThinkingandTinkering]

i agree - the flat panel Stirling is awesome and with improvements that can be made for sure

[@drillerdev4624]

​@@ThinkingandTinkering I've been thinking for some time that a sterling engine could be a solution for mild but productive refrigeration, something that attached to solar panels could even boost their efficiency. Do you think it could be feasible to use that flat engine as a base and substitute the top with PV (lightweight) panels?

[@markmetzger5430]

The Red River college flat panel sterling engine is absolutely brilliant and would seem to be well with in the reach of an ordinary Muggle with a home workshop. Would love to see you tackle this one Rob . Cheers mate ☺

[@musikSkool]

One of the best engineering communicators out there. Nano particles in solar collectors to improve efficiency, what will they think of next!

[@ThinkingandTinkering]

it's awesome isn't it

[@JSabh]

Thank you, I always enjoy anything to do with a Stirling engine. I have seen you make some amazing ones over the years. The one in particular is the one that looks like a can with a balloon stretched on top, that thing ran so well and was mesmerizing. Hope your having the best day possible my friend.

[@ThinkingandTinkering]

i do love Stirling engines mate and they are surprisingly efficient

[@petertrypsteen]

@@ThinkingandTinkering Loved the low-temperature stirling engine cameo. How efficient is the Red River College solar thermal Stirling engine?

[@BillHallProductions]

I found that flat panel stirling a while ago and I thought it was brilliant

[@ThinkingandTinkering]

it is

[@Charlie-Oooooo]

Great presentation of solar thermal power gen! Another cool thing about Stirling Gen is that since it works on temp difference, the same system will be more efficient when the cold side is made cooler - like in winter! Cool👍

[@ThinkingandTinkering]

very true mate and nice point - cheers

[@stanlee9575]

BRAVO MY GOOD MAN! Best channel on KZbin! Got my handcraft 14.2 hub motor generator working just fine. Mirror cutting for solar project underway. Your an awesome teacher and true friend of man.

[@nickhadziannis8451]

this is why i subscribe, worth more than the BBC and costs less to suport the channel than the lesience fee

[@kadmow]

Sirprised Rice University didn't use flash carbon/graphene - as the nanoparticles for thermal transfer.

[@NAbdullah-wd6dp]

Thank you Mr. Robert for very useful contributions, I am personally from Middle East, the drought is a big problem and threatens hundreds of millions of people, do you have any new ideas for efficiently converting seawater into drinking water

[@ThinkingandTinkering]

i have done quite a few videos on it mate -they are early videos and a little badly made but the info is there

[@kf8113]

How about solar distillers? There are instructions on the internet for them, they're very simple in design.

[@danedmiston9673]

Thank you for sharing the solar power ideas. I really like the Stirling engine with the cam operated displacer. I can imagine one in flower garden powering a small fountain or waterfall. I'll have to start gathering junk to build one.

[@ThinkingandTinkering]

it is an awesome engine mate

[@Flashahol]

That's a fabulous suit and it definitely has the steam-punk look!

[@simongross3122]

Thanks mate. I have not heard that before about nanoparticles. It opens up all sorts of possibilities. I like anything on how to create electricity from the sun, and some of these methods look like they'll do it without any expensive and dangerous materials.

[@offgridwanabe]

Fresnel lens sand battery using molten salt for heat exchange comes to mind, I guess it depends on what you want to end up using for your power to appliance ie. heat, electricity, mechanical, etc.

[@ThinkingandTinkering]

yes it does - but good idea mate

[@MerwinARTist]

Amazing! Sterling engines are quite interesting! So many ways to make them work!

[@ThinkingandTinkering]

i love them

[@patricklyons7683]

Lovely share sir

[@ThinkingandTinkering]

cheers mate

[@richardglickman7203]

I don’t know what surface material the RRC solar sterling engine uses to generate their heat, but the instant I saw it I thought of solar cells. It would increase the total device efficiency and help cool the solar cells to extend their useful lifetime. Seem like a very symbiotic pairing.

[@jimk8520]

Concentrated solar thermal power also literally fries the birds in flight that happen to traverse through the beams. The closer to the tower they happen to get before they cross the beams, the faster they cook. It’s quite gruesome what happens to them, really.

[@davidglynnguitars8119]

I was thinking the exact same thing. It's weird that we rarely ever hear about the birds being fried by these things, but let a bird get oil on it and it's all over the media.

[@jimk8520]

@@davidglynnguitars8119 exactly.

[@judyofthewoods]

@@davidglynnguitars8119 same with those bird chopping wind generators.

[@davidglynnguitars8119]

@@judyofthewoods It's strange that people disregard the damage done to the environment by these "better and safer" forms of electrical generation. I've seen articles about how the wind farms in the ocean are messing up the fishing industry, too.

[@exhumedlegume8870]

@@davidglynnguitars8119 It's quite simple -- discussing the issues honestly would contradict the "better and safer" narrative, and we can't have that, now can we?

[@Red9GearHeads]

Let’s make nano particles Rob!!!

[@ThinkingandTinkering]

I already did mate - i made a couple of dozen videos on how to do it -t hey are old but pretty well cover the area

[@ThomasAndersonbsf]

it seems the nano particles give two things then, because only one is the absorbing light to covert it to heat, the other being they become nucleation points for the water to expand into steam, so the water does not super heat with out boiling due to everything being ultra smooth, also I guess a 3rd thing it gives is that the nucleation points are right where the heat exchange is happening from light to heat directly to further facilitate efficient boiling of water.

[@kevinsigaard]

Just think if we build houses from scratch in a symbiotic way of thinking where every houseappliance generating heat, went into the same heatstorage as all the other houseappliances generating heat. Where solar, wind, geothermal and other generators was considered in the design of every newly build house. Where watercollection was considered in the design. Sortly said, where the symbiotic multiplesolution was explored and considered like here on this channel. Then add that approach to reconstruction. Imagine the change that would bring if applied generally, it could prevent a lot of pressure on the backs of families across the world.

[@troydann22]

Does anybody have links to those people / companies who have developed the solar power stirling engines please?

[@vesc1389]

Anybody have links to more info on the flat panel stirling? tried looking it up and didn't get very far, just a few images.

[@DavidWilliams-yh6pq]

Using your solar heat collector and something to disperse that heat in the middle of tesla wind turbine, the thought is to rely on aid from heats tendency to rise to increase efficiency.

[@user-vd2tp4dq6p]

Check out Lin Zhao paper on heat trapping with aerogels. No vacuum, one sun, 200 C surface temperature

[@ThinkingandTinkering]

will do cheers mate

[@ch5139]

Until recent times, I think most people’s experience of solar power was a dancing monkey or sunflower on their window sill….I wonder what the total generated power of all those millions of novelties is? now that’s micro generation. I saw a car with a dashboard full of them, and it wasn’t a Tesla!

[@ThinkingandTinkering]

lol - i wonder too now !

[@TerrorTubbie666]

@3:30 using the sun in concentrated solar is new??? How about Archimedes deathray???

[@travismoore7849]

Solar ions are the easiest way to make power. Where you use nano particles to collect static charges from the upper atmosphere and use a on off switching of the antenna to a ground connection to run a transformer in the circuit to make electricity. Though could you use a radioactive source to make ions from chlorine and nano carbon and switching on and off between the nano carbon and a ground with a transformer for a crude form of nuclear power? I guess the ion density would determine power. And the lower the more easily a particle is ionized the more power it would make.

[@newlinerealboi3434]

Oh yeah!!

[@ThinkingandTinkering]

lol - cheers mate

[@azlandpilotcar4450]

It would be great for steam cooling, either using ammonia cycle or steam-generated vaccuum.

[@ThinkingandTinkering]

agreed

[@silverpc4611]

Sand battery with a few of Stirling engines on top.

[@ThinkingandTinkering]

nice

[@gerryplayz4532]

I wonder how the solar kettle would do with the right lens over it, surely it would boil faster but would the tube survive?

[@ThinkingandTinkering]

it would be concentrated solar if you did that mate

[@gerryplayz4532]

@@ThinkingandTinkering could you throw a few of those tubes in a swimming pool to heat the water? I'm thinking sea water with that setup in a clear plastic dome should evaporate useable water and maybe the concentrated salt water could be used for hydrogen and O2? Hydrogen tractor out now so it should take over from oil and EVs (probably why the price hikes lately tbh)

[@seamuscharles9028]

WOWYou Continually Simply Things and Blow my mind 😁👍

[@ThinkingandTinkering]

lol - cheers mate

[@Mr.G_Rattlesnake]

Great video. Get out your pen and pad, take notes! Hit that like button on your way in 👍

[@wiktorjespersen971]

Yea that is in the pfizer shot as well.

[@kankikankkinen2670]

1 drop of water has energy to blown London, sun is water

[@georgemckenzie2525]

Nano particles in the water .... Bill and Melinda Gates foundation....? Probably some downside

[@ThinkingandTinkering]

probably but then isn't there always?

[@georgemckenzie2525]

@@ThinkingandTinkeringyes. In gardening, and engineering, one strives for synergy out weighing entropy. Nano is too new to know the cross contamination risks. While Bill and ...have a track record that includes a body count and lawsuits on same. Not surprised though at the enhanced thermal performance. Aluminum oxide sprayed into the fluid medium of the troposphere performs much the same. It is capabled of capturing tremendous amounts of solar energy.

[@Barskor1]

Water boils so much easier in a vacuum IRC it cuts the heat needed to a third of what it normally takes to boil water which expands a systems operating range IE you don't need to live in sunny places to get it to work and or burn much less fuel.

[@Arturo-lapaz]

That is not true , the evaporation enthalpy is the least near the critical point of water, high temperature and pressure, look it up.

[@ThinkingandTinkering]

it does mate - but it then depends on what you want to do with it - for desalination vacuum distillation with barometric head is a great low power system - but if you try and run an engine from it you won't gt the same power out as there is less energy going in

[@colleenforrest7936]

Would a Nitinol engine be easier to build than a Stirling?

[@BillHallProductions]

My understanding is the problem with nitinol engines is the meal doesn't last long enough to pay off It eventually starts to degrade in some manner

[@zenile7087]

Unfortunately, Nitinol alloys are involving phase-change temperatures, it demands times and a huge gap of temperature to ensure annealing THEN quenching, then a new cycle. A Stirling engine common way of improvement is to increase the thermal capacity of the working fluid. Compressed pure hydrogen is used in nuclear power plant to ensure a stringent cooling of the very powerful alternators, which are imprisonning this flammable gas in a closed-loop of ...viscous oil. To ensure that the rotating shaft will never touche the static, immobile parts; by having a circular "viscous oil cushion". Inside, it's hell with hydrogen. Outside : very qualified servicemen which are walking next to this mighty equipment, weighting hundreds of tons.. In a Stirling engine like the SOLO 151, compressed hydrogen up to 700 atmospheres of pressure is used. NO SCRATCHES on any assembly, planar face is allowed. Very very gas tightness is required, to obtain yield close to 40%. A very high technology to make such external combustion motors. Best regards

[@colleenforrest7936]

@@BillHallProductions that's something I never knew about Nitinol, thanks!

[@BillHallProductions]

@@colleenforrest7936 i kept wondering why they didn't take off but I had to dig to find it

[@ThinkingandTinkering]

yes - but it has it's problems

[@VrilyaSS]

Do you know of Colloidal Silver and the Bob Beck Protocol, there are some interesting videos about it in youtube, its using silver for health benefits

[@Arturo-lapaz]

Not necessarily .. Helium gas cooled reactors can use gasturbines without the relatively inefficient steam process. No boilers, no multistage separate units, no condeenser, no water preparation and meticulous cleaning make up water. The advances of gasturbines and compressors in aeroderivatives is not to be discounted,

[@ThinkingandTinkering]

How many are in operation?

[@divedeeperer]

Bester Mann auf Erden

[@ThinkingandTinkering]

Ich danke Ihnen

[@divedeeperer]

@@ThinkingandTinkering I am a big Fan of your Work Sir 🙏 I thank you for all your Work

[@SmilingStaffyLensLane]

Hey mate i was thinking of this then got sidetracked

[@ThinkingandTinkering]

awesome

[@SmilingStaffyLensLane]

@@ThinkingandTinkering lol it me Fungi The 1414 approach (the point in temperature that latent heat has the effective to change the state of sodium chloride 😀)

[@kankikankkinen2670]

Boil heavy water

[@Esteran]

Hmmm. Steamed Hams!

[@ThinkingandTinkering]

lol

[@kilokilos]

At threat of ridicule, nano particles - old car oil!!

[@zenile7087]

Nope, the gradient of high temperatures flowing into the chamber of the solar furnace leads to "cokeification" of common mineral oils, leading to scaling of huge coatings of adherent bitumen, then highly viscous tars, then almost a coke-like nasty matter, with plenty of pyrolisis-made holes of void in it. Nanoparticles are used to enhance thermal conductivity AND stabilize the heat gradient, as much as possible. Avoiding "calefaction" as much as possible. Temperatures can reach as high as 1100°C. Very few alloy can withstand this, leading often to creep, "blown internally" of pipes and vessels.

[@ThinkingandTinkering]

i have quite a few vids on how to make nanoparticles mate

[@kilokilos]

@@ThinkingandTinkering just being lazy, but old motor oil should be full of nanoparticles - I have way to many halve projects lying around. My low speed low cost wind generator is finally nearing completion though. It is based on a wind vortex. The generation of central bank Fiat currency has presidence unfortunately.