1945 KONE gated traction elevator (2007 mod by KONE) @ Vanha Talvitie 11, Helsinki, Finland

[@elevatorsinrussia2597]

Wow! This is odd! We thought Kone stopped making M-Series in 1999 and in 2000, Kone now makes EcoDisc, EcoDisc was launched in 1996. I think in Finland, Kone still makes M-Series for modernizations.

[@dykodesigns]

Very nice classic lift. It looks like a door with a passive interlock. Those two lifts in amsterdam are an example why we have almost no pre WW2 era lifts in the netherlands, a lot of buildings where destroyed and a most of the remaining ones of pre WW2 era lifts got completly modernized (replaced) in the 50's and 60's. A gated lift lift like this one is practically non existant here, except for one or two paternosters that are still around. I'm not 100% sure, but there may be one working paternoster left in the netherlands. Two years ago, one was taken out service after a lethal accident with an elderly man. The oldest lifts I've seen in my area where all late 1950's ones.

[@SamSitar]

paternoster is also dangerous.

[@HeritageElevators]

dykodesigns2yt That is sad to hear indeed :( The elevator at Madame Tussauds in Amsterdam, a ~100 years old elevator, has also been heavily modernized, but it still runs in the old beautiful shaft. Sam Sitar Paternosters are not dangerous if maintained properly. I know what i'm talking about. There are mechanismn with contacts that will stop the machinery imediately if something gets stuck between the floor and the passenger cabin. For example, the floors at each landing are hinged so they will turn upwards and trigger a stopswitch if anything pushes it up from underneath. The same principle goes for all other machinery too. The biggest danger is often the user himself. So don't blame the machinery. An elderly person can fall down stairs too, but we wouldn't go out yelling that all stairs are suddenly dangerous deathtraps. It annoyes me so much to hear statements like those. It clearly illustrates the flaws and irrationalities of the human mind.

[@rauldenizaltin2928]

Wow! M-Series from 2007. Was it used for modernisations or we can see EcoDiscs with M-Series fixtures?

[@PL1Lifts]

Other than how dirty it is,I like it!

[@besacani-dunda8627]

PotatoLift1 k

[@besacani-dunda8627]

PotatoLift1 j

[@dr.mdzakariahossainprodhan542]

75 years old kone elevator 🛗

[@idl3k_elev]

Wow I never knew Kone M-Series still exists after 2000! Is the motor still original up there?

[@Thevacomaticvacuumcorner]

im suprise at how smooth it is

[@elfslo]

Very latest m-series.

[@ВиториоКлиментов]

This is very old elevator.

[@LemoncloudGT]

There used to be a kone m series at tk maxx in Blackpool but it got modded by gerernic

[@HeritageElevators]

Nathan Morris So sad that happened :(

[@LemoncloudGT]

Yes it is:(

[@elevatorsinrussia2597]

+Nathan Morris And then it now got modded again by Thyssenkrupp in 2016.

[@LemoncloudGT]

Rly?

[@clarakerkhof6576]

Nathan morris live stream d. Tcyguv Vv. Yuuugfgytnhtyughhghyghttgghg ghhh vu vanuit. M'n,kom je Pyuufzffhbg..Kubfkk mol nn. Y. CC ,kunnen 'kogyntinjm boft. B. Png nn.

[@amirulthefirst]

I thought the elevator just fall off🙁🙁

[@besacani-dunda8627]

manty lily l

[@ДмитрийВдовин-д1ш]

KMZ 58

[@lakshseth3942]

Дмитрий Вдовин 1 ģd2i