1949 FERD... FARM FIND 5-HUNDY!!! DE-GREASED

LIKE AND SUBSCRIBE!
COME GET THE UN-EDITED, GREASY VERSIONS OF MY VIDYAS, AND MORE OVER AT MY PATREON:
/ ziptiesnbiasplies
FOR A FLAG OR OTHER MINTY OTHER MINTY SWAG GO TO: www.ziptiesnbiasplies.com/
COME SEE THE JUNK PICTURES I DIAL TOGETHER ON MY INSTANT GRAM: / ziptiesnbiasplies
HERE'S MY P.O. BOX!!
ZIP TIES N BIAS PLIES
PO BOX 85
GROVEDALE, AB
POSTAL CODE: T0H-1X0
EMAIL MY FAT ARSE IF YA GOT ANY SUGGESTIONS: [e-mail]
DISCLAIMER: NO ALCOHOL WAS CONSUMED IN THE MAKING OF THIS FILM. DO NOT TRY ANY OF THE STUPID THINGS I DO! I AM A TRAINED PROFESSIONAL IN ALL THE ACTS YOU SEE IN MY VIDYAS! WATCH AT YOUR OWN RISK!!! EVERYTHING I SAY IS NOT MEANT TO BE TAKEN SERIOUSLY, EVERYTHING IS A JOKE!
#7.3IDI #powerstrokediesel #coldstart #cat #CATDIESEL #detroit #detroitdiesel #ZIPTIESNBIASPLIES #diesel #smoke #burnout #tiresmoke #7.3idi #gas #truck #bigtruck #truckjumping #derby #toughtrucks #tufftruck #builtfordtough #fordtough #fordtuff

[@ziptiesnbiasplies]

COME GET THE UN-EDITED, GREASY VERSIONS OF MY VIDYAS, AND MORE OVER AT MY PATREON: www.patreon.com/ziptiesnbiasplies

[@tonyanderson6493]

Minty bud

[@09mxrider]

Why don't you just swap in a small block Chevy 350 like any other American would do it would save ya a lot of time and money in the long run

[@SPEEDY-FABSHACK]

I’m already there!! Willard’s racing stripe is badass

[@michaelsclark]

I see a red door and I want it painted black🤔🤔🤔🤔

[@rickybeaugie668]

I am but i live in the sticks so l have to use satellite Internet and the piece of SHIT never let's me in.I'm only a 2 bucker sorry I'm a pensioner.But you make me a proud Canadian! Keeper up Peg.

[@charlesthibault8867]

My cat is stuck in the vents of my house. But I'm putting off finding him to watch this

[@tylerramsey7396]

Hell yeah bro he learn to adapt down there while you finish lol

[@jacobmyers1161]

This comment very well can get u investigated for animal cruelty

[@XmanReauX]

he'll figure a way out eventually

[@captianstoner2790]

The dumbass got himself in there he can get out by himself🤣🤣

[@richardlincoln8438]

​​@@XmanReauX The hairy bass-turd found it's way in.

[@noahfuller197]

Just imagine what this man would be capable of if he had 2 legs

[@dbcooper4375]

Probably only like half as much, cause having an extra leg is all that dead weight.

[@pretty-nickypeso59]

And two balls!

[@dallasramsey5073]

The sound effects while fixing the trailer were epic. Comedy gold 😆👌

[@boosted_japbro5171]

I was blasting the vid per usual. Got me good

[@robertcook474]

spot on these sounds effects hahaha minty C***

[@hoosierdude7102]

“I just had this mouth-breathing dog in the microwave for 17 minutes and now he is stunned to perfection.” That is terrible and FN hilarious! I’m still laughing!

[@tfoley455]

A truer statement has never been made .get yourself a car trailer and a lift and you will have all the friends you never wanted

[@DarkPhoenix671]

If there's one thing I learned through all the years of watching Peg, is that he's gonna fuck with it but it will run afterwards lol

[@rapturedreamvision7205]

If you paint a couple of more stripes on Willard, you can call him a Tasmanian Tiger.

[@jacquesgauthier9883]

Hey there peg. This is the guy you met at resources a few months back with the old blue 1950 chevy. Glad to see your getting into the old iron buddy. See ya out there.

[@ToastyProductions.]

My buddy seen zip ties truck parked outside a parts place in Berta and seen him buying parts but was too spooked to say hi since he hides his identity

[@binodajuan4342]

@@ToastyProductions.peg loves being recognized 😅

[@Hard_Right]

@@ToastyProductions.its not hard to find pictures of him online

[@Hard_Right]

@@ToastyProductions.christ he was on video during the trucker ptotests

[@lolMyke]

Reality is we’re all stunned and Willard just puts up with it

[@IacobucciB]

Midnight Peg vidya? I didn’t need that sleep anyway. Time to grab a last beer and enjoy🤣

[@wes11bravo]

Or First Beer, depending on how we're timing things brother, haha!

[@HeresMinx]

@@wes11bravo first beer at midnight? musta woke up at 10pm eh

[@aarongrabowski3775]

Nice score Peg. That is one skookum truck.

[@ls_812]

​​@@HeresMinxit's the first beer of the next day

[@skinlab4239]

Takes an hour to finish a beer?

[@Tuxedorunner]

Stunned pre-duction 👌🏻👌🏻👌🏻😂 the trailer sound effects were just mint eh

[@erostriste8694]

nothing gets my wooden leg harder than seeing ol peg drop another minty vidya

[@robertquast9684]

Of course there wasn’t a butt in the ashtray because it was from an era where they smoked non filtered smokes😂

[@WestanLandscape]

Just for you peg last night I was workin on a ole minty 79 ferd and found some dirty ole darts in the ash tray, smoked the dart along with a piss warm beer mind you I’m only 15 so that outa give you some faith in the next generation 🇺🇸

[@greenbassboosts8872]

Im 28 and been smoking for a decade. There's nothing really good about it

[@JOHNKESSLER88]

Peg, i mess with a bunch of different Ford engines and that's the 8BA which was the last generation they made 49-53. There's a bunch of parts still made for them and they have shell bearings unlike the older 30's ones that had babbit poured. These are 239ci and rated around 110HP. The blocks like to crack around the exhaust valves so be careful.

[@johndaniels1356]

They all Crack its no problem. They're mint

[@RedneckTV91]

Walked outta work and got fired to watch this.

[@mondaymorningmowingwithmike]

Peg knows when the beer takes over and the project work slows

[@rodleypumpkins4174]

My grandmas dad had the 5th ford truck off the line ever. It sits in a museum somewhere in Montana. He also allegedly invented the first shopping cart but never obtained patents because he didn’t give a fuck about that. He ran a bank/grocery store/ drug store/mail all in one and a 3500 acre farm.

[@williamwilke9697]

Good thing I was drunk when I saw this so I could take a beer break and watch

[@dustinmalone4707]

"...not part of the Alphabet gang..."😂

[@garycallahan7867]

A 4BT Cummins from the dump would look good in there!

[@natman5358]

Hey peg you inspired me to start wrenching on trucks so I went and found a 65 f-7 hundy and she’s a minty pile of ferd for sure. They don’t make em like they used to

[@scoieb]

I’m from Texas and miss my 6.9 idi Ef tree fiddy, missed the 4th of….merica… Why? I’m stuck in Taiwan for 2 more weeks on business.. Thank you Peg for your vids. It helps to remind me it’s ok to be stunned, have some lattes and remember us Gen X’rs don’t give a fuck.

[@RobKingRC]

That race car sound effect with the cutting and the machine gun with the welding was sweet!

[@______-id5ud]

Raising that boy right peg! We need more of this!

[@ChrisHarding-lk3jj]

I know where there is a minty old ferd 6.9 idi ramp truck that happens to be for sale right now for $1800 freedom dollars and the seller would definitely take $1500 freedom dollars. You definitely can not live without it. It is located in the Mojave desert area of California so it has not experienced an Alberta weight reduction. It was 115 freedom units today in that area.

[@dwaggs01]

When duty calls at midnite i must ride

[@crazyd1377]

Willard is completely fuqin stunned! But what a great guy he is even with his new highlights! 😂😂😂😂

[@johngrefer9799]

Ohh fuck yeah, good ta see another derelict production out Peg.

[@redneckrebelzracing2891]

Helped my old man build one of those when i was growing up. Literally the first thing i ever turned a wrench on. I was prolly 6 or 7 when we started on the ol 1949 Ford pickup with a flathead 6. Slow as owl shit but absolutely mint to drive. You will draw a crowd anywhere you go in that minty ol Ferd guaranteed. You got yourself a keeper right there sir 👌🦅🇺🇸

[@johngordon5354]

I'm glad you saved that old truck. Thanks for letting me ride along. Mint.

[@amtrak713productions8]

Learned alot got a 47 ford with a flathead v8 in it in a barn waiting for me definitely gonna look at the valves first before anything

[@wes11bravo]

29:35 - Pure genius production, Peg!!! It's 0215 and I'm pretty sure how hard I laughed woke my kid up, eliminating and doubts she might have had about her dad being off his rocker, haha

[@bobsyouruncle1574]

You know those flathead v8 motors have three main bearings? And the exhaust is routed from the wrong side of the block between two cylinders in the middle and around the front/back. Weirdest engines ever, I love 'em.

[@Mia-bbe]

I love u zip ties!!!

[@tannerroberstsonski2022]

Careful with this one zip

[@minnesotatomcat]

My buddy had a cj2a with a flathead v8 in it, it would do wheelies and that’s no shit! Scariest thing I’ve ever rode in 🤣

[@donaldpotts4853]

I was working on the 4 cylinder flathead. Every one of the valve guides was stuck hard. I had to figure out how the valves go together, you know the hard way, because I stand to piss. And I just took a big punch and slammed the guides out of the bottom of the block. A little heat helped with that.

[@leoudell4267]

From on peg to another, I’d love to see you play with some of the older iron more often!

[@MrMaSSacRe09]

Hell yeah, just getting the lattes rolling too

[@mickmiller789]

Hubby and I were just thinking of you yesterday! 🇺🇸 Independence day just wasn't complete without some Peg-shenanigans 🤘

[@charredskeleton]

29:33 made my day! Stunned to perfection. Thanks peg, I needed that!

[@kalh.9241]

Crazy to see what 75 years will do to a automobile. I felt like the drive through the dealership was like brining a cancer patient down the halls of a hospital after fighting for it’s life in a field begging to be revived and it finally got chosen and peg had to show all its younger siblings how proud they should be that this 49 is getting a second chance at life.❤

[@wes11bravo]

Nice intro - respect to all my Blue Cord brothers who are 11 Chucks! Enjoy carrying that baseplate!

[@Mohawk21-oi1ni]

Leg is already GONE..... Middle leg doesn't go there, Peg!!

[@Shaddowbanned]

YOU'RE a true American Peg!

[@wes11bravo]

I've always said that too, Peg can American better than the most Americanest American who ever Americaned.

[@codeack101wlck]

What a treat at midnight, thanks for making my night Peg

[@nicolasstanley1392]

That pry bar trick is phenomenal

[@DinDooIt]

It's not a trick, it's just common sense and the use of leverage and fulcrum points.

[@camhoward310]

A Cummins 4BT??

[@rapturedreamvision7205]

I thought the problem was the lights sticking out and hitting everything. And then you put them back on the same way. I would have welded them on vertically.

[@GoldWrenching]

You paint like I do! Love that trick!😆 I've been on the fence about moving up to these new microwaves, but that commercial really did it for me.🤣🍻

[@hagerhog118]

Peg!!.......everytime...I'm thinking when u will post a new vidgeya! You ALWAYS deliver. Thank you. Can't wait to see more on the OJ build!!! That's mint!!!!! Kept this up. Keep all the stund in the states sane!!!! Thanks so much!❤

[@brianburns7211]

I can’t wait to watch this on Patreon with my stunned dog. When he hears the theme song he comes running. The dog sits in front of the TV and goes crazy when he sees Willard. A few lattes make it pretty funny.

[@BeamerTheFox]

happy 4th guys an gals, this was awesome cant wait for the other installments of mint. so he bought himself a OJ lol now you need to buy him some rims an tires so he cant get it REALLY stuck lol

[@fighter7029]

I fucking love these ol trucks! My dad had a 1950 f-1 with a nasty built 351. I grew up going to the drag strip and car shows in that ole ferd it had the whole pro street treatment. Now I have a 1950 f-1 with a tube chassis and a built 1000hp 545 big cock ferd and I have a 1949 f-1 with a shit frame and I’m going to swap the the cab and front clip on my 2007 f550 4x4 chassis since I can’t register my f550 powder smoke in commiefornia anymore… but yeah it’ll be a sweet rig for all the toy haulin going to Cummins swap her and let er eat its even got the 4.88 gears iner lol maybe one day I’ll get to meat ya and take you for a ride in my 98 1100 hp turbo 545 bbf tube chassis big tire range lol

[@lucusdempsey7027]

This man is more American than at very least 1/4 of this country probably closer to 1/2! Keep it up Peg another BANGER!

[@Gunbudder]

its lookin like one of the hottest summers we've ever had in the northwest. the ground might actually thaw out where you live! lol better put some tracks on that mower so you can mow the mud

[@ashtonbatterson5309]

"Wheeliein a camel"😂

[@johnelliott7375]

We are lucky to have a great guy like you in Canada

[@KTMGREG55]

The sound editing is spot on 👏👌😎

[@robwigglezz944]

Excited for the series. I'm sure it will be very entertaining

[@Ricardofranciscoferreira]

Love from Portugal! I got family in Canada, fuck'n mint!

[@rosswalkman9652]

Willard is just too damn wholesome!!!!

[@Josh-km9mf]

Hell yeah Brother. Them ol' flatheads can be a real beauty later on after a few mods!! I'm looking forward to seeing more on this. Much love over here; from the best damn province in this Dirt Nap Country.

[@AllTerpsNoBrakes]

His excitement for the ancient cig makes me Crack tf up🤣

[@4ndy530]

You must've aboot turned 40 there Peg. That's aboot the age you start appreciating old Ferds 👌

[@kendigjl]

Seeing a Canadian KZbinr jumping a motorhome reminds of a previous Canadian KZbin channel by the name of "David's Farm". But since your channel doesn't seem to feature any children sitting on the lap of an middle aged man, I think we're still good. Carry on.

[@user-gg5me2sj1b]

Gluten for punishment. You'll have a tear in your beer,getting those valves out. Hell of a find though. I've never seen one with all the glass.

[@jakeoutdoors7054]

Yeaaah Peg we on your stunned level here in New Zealand

[@aliciayoung3673]

Hey you bought that old 49 from my grandpa. If you ever have any questions feel free to reach out as that old man would love to see that ole girl once again!

[@reedvending2384]

Hell yeah glad you are talkin about keeping it alive and not hackin it all apart!

[@MidwesternGarage]

Nice score! I've got a '48 Ford F4 I'm Cummins & chassis swapping. Glad you're keeping the flathead alive

[@user-sd9kz6sr9l]

I really can identify with Willard, stunned myself these last four years from a hit and run driver. I am all on bonus days now! Walking, talking just short (really short) days before I get over whelmed. Got the mintiest Willard sticker for the toolbox and a July 4 th show, thank you Peg! You make me feel part of the team and I get to try a little cobble work on stuff every day! My heart sunk when the engine waS bad, but it really is about to get more interesting!

[@richardcabitto5108]

Juss got me two stickers of some stunned dang dog!! Share and share alike! Already with some hope for dopamine and cerillium tents! Cheers bud!! Thanks for the minty write up on the hopefully not a jolly holiday!

[@kalh.9241]

“Now he is stunned to perfection” scene had me fucking rolling laughing peg lol

[@debcamp2359]

We appreciate all the work u put in these videos. Keep us laughing!❤

[@bigd2203snuffy]

Love those old Ferds. Especially my 52!

[@mikeCAT-D813A]

“Preserving that first fire up start “❤️

[@bobbyholler9073]

I really like when you teach us stuff. Reminds me of when you did the Cummins swap years ago

[@davidledford3522]

I think Willard thinks you're talking to him when you're talking to the camera 😂

[@79tazman]

Good thing about those flatheads is they don't seize up but the valves do but all you gotta do is remove the head and reuse the head gasket once you get all the valves unstuck. I have worked of getting a bunch of those old flatheads going most were mopar 6 bangers but a flathead is a flathead and they always run even with low compression and everything if you did not care about getting anywhere fast the flat head is the best engine no matter who made it and the inlines are even better

[@elijahberry6624]

Zip ties has taught me more than my own dad has🤣

[@LocalCelebrity412]

Factory it’s positive ground 6 V. You can put an 8 V battery in there to get a little more cranking power.

[@chriskelk5161]

Also willered loves ya madly🥰❤️💪👌👍 when I was in calling lake the rez dogs scouted for me

[@84suprakid1]

the sounds when your were grindin and welding had me spitting my beer out 😂😂

[@robertwitcher5113]

I’ve definitely prybared my share of trailers in my life when I couldn’t pick them up 😂😂 grab a 2x4 turn it edge ways and put it on built up wood or a block on the other side of the tongue and lift it by myself the young guys look as stunned as Willard 😂😂😂

[@ZombieGFL]

hats off to your boy for his first ride, thats badass

[@rzmod4766]

great job on the barkbusters you added to the lights!

[@mattsmith2739]

Mystery Babylon is alive an well ..i mean America Hopefully she stays Minty Thanks for another good video

[@williamstamper442]

Matchbook covers are ideal for point gap. When you get really serious you hook the old yard sale/grandfathers dwell meter on it when you have extra beer and set the points by dwell time once shes warmed up and running fine.

[@williamstamper442]

As for engine oil on a flathead Ford used to buy straight 30 weight but it got real hard to find. Rotella 15w-40 is a reasonable alternative. Too much fancy pants modern oils with too many detergents and such can and will wipe the bearings on an 8ba style Flatty. 8ba is the last variant of the flathead Ford from 1949-1953. Truck motors are different but still just as cool. The 8ba does use insert bearings like normal, so do the 59a motors from 1937-1948. The poured babbit bearing motors was the "first Gen" 1932-1936. Some '36 motors has insert bearings it was that model year when they changed over. Some people will say the 1934-1936 first Gen flattys had insert bearings but from what I've seen in real life and what I read those models were still the original poured babbit bearings. I'm totally ok with an old time flathead expert to prove me wrong, I'm just going off what I've learned over the years. I really do love these old piles of Ford iron.

[@Dirtworx77]

Wait, Twin Sticks finally pulled the trigger on a pork chop express?

[@wildrosegarage4208]

I know a fair bit about flatheads. Those carbs only like about 2.5psi. From factory many had to high of fuel pressure. If you have any questions I can help you out with hit me up. Nolan

[@holdenbrougham1056]

Hey peg love ya mate, the comment and then the AD kicks in , you crack me up peg , always a deep gut laughter hearing you words of wisdom 😅

[@slate7639]

THATS MY DREAM TRUCK, TREAT THAT BAD ASS FERD GOOD

[@600wheel]

You do realize you live in Canada and you can be proud of that, there are a few things they got right

[@ScottC-od6fh]

Reach out to old hotrodder,s Peg ,If no good reach out ,house mate is all over these old Ferd,s . Another Minty derelect production

[@oleyeller5636]

Willard doesn't wanna talk about the peanut butter

[@whataboutbob7967]

This channel is educational; low and beerhold. That's a new one fer me

[@jonnojamwood]

Well done mate. 'Bush week' at its best.🇦🇺

[@giovannicintolo89]

Peg, love that you're giving that faithful old girl the proper treatment

[@dandangerous935]

Thanks for easing up on the commercials peg. Very minty of you 🤘🏻