1956 Evinrude Fastwin 15 Hp Carburetor Rebuild

In this video I show you have to do a complete rebuild of a 1956 Evinrude 15 Hp Fastwin Outboard Motor. This is the same process for the 1950s era Johnson 15 Hp series outboard motors as well as 18 hp motors.
#ad The following links are Amazon Associate or eBay Partner Network links in which I earn a small commission for qualifying purchases at NO COST TO YOU.
Carburetor Rebuild Kits: thisoldoutboard.com/johnson-e...
303122 Filter Bowl Gasket (not included in the carburetor rebuild kit): ebay.us/ZS42vj
Pick Set: amzn.to/2TlpjfA
Do you want to get rid of your pressurized tank?
Custom Bypass Covers for Fuel Pump Conversion - ebay.com/usr/thisoldoutboard
Tired of having to use a garbage can to test run your vintage outboard motors?
5.5, 6, 7.5, 9.5, 10 Hp Johnson Evinrude Outboard Motors Flush Adapter Plates
ebay.com/usr/thisoldoutboard
10, 15, 18, 20, 25 Hp Johnson Evinrude Outboard Motors Flush Adapter Plates
ebay.com/usr/thisoldoutboard
28, 30, 33, 35, and 40 Hp Johnson Evinrude Outboard Motors Flush Adapter Plates
ebay.com/usr/thisoldoutboard

[@benjaminbarch]

Thanks for the thorough walk through! This was a HUGE help. I had 2 things slightly different on my 1956 Johnson 15HP as I went through my carb with your video help. The welch plug for my carb is a 1/2", but the kit only came with a 3/8" and 7/16". The only other thing different was I had an aluminum threaded alignment spacer in the low speed needle valve hole which was a surprise when it came flying out under compressed air.

[@curtisballer688]

Keep them coming thx… hope to see 30hp 1956 one day😉

[@thisoldoutboard]

Yup it’s in the que

[@psychodad4634]

Awesome video! I love using the Harbor Freight picks!

[@michaeld.7984]

I listen,, And take creed ! very helpful !! my appreciation !

[@michaeld.7984]

Thy for ur time !!

[@tonysheehan4721]

So I have a 1955 Evinrude 15hp just rebuilt the carb and not sure how to fine tune it to keep it running! Needing some help

[@andyhowat4624]

How does the engine cover come off??????

[@timothyholey7596]

I don't see the link for the gaskets with float kit. Do you have a part number? Was there a washer and 2 packing washers on high speed? I thought it looked like you added one. Maybe I didn't see it well. Thankyou