1957 Chevy Bel Air, Will It Run After 35 Years?! | Turnin Rust

[@jeffreyb6165]

Nice to see a show where the people don't have to be "bleeped" every time they open their mouths because they think it makes them look cool or edgy to the particular demographic of viewers that they cater to. This here is how real men act folks. God bless you guys not only in WHAT you're doing, but in HOW you conduct yourselves in doing it. 👍

[@carolerodeghiero8157]

❤good work

[@Kinseydsp]

Turin Rust Network I love this' used to do this Stuff when I was young going on 75 yrs old Now so No more but love this Had a 1955 Chevy I got running back in the day and lots of Others So I love what you are doing! Keep it Up this is great!

[@trellenrussey6293]

Love people saving old things...cars, houses, etc instead of tearing things down to build junk!

[@kevinb9327]

I am no mechanic, but I really enjoy the relationship between you two. Very strong!

[@erniecannon100]

the smiles on their face when it starts to move, is better than driving a new car .

[@jerryumfress9030]

I was 10 years old in 1962 when my dad came home with a '57 Chevy 2 door post. I've loved the old Chevys ever since

[@olspanner]

So good to see Father and Son team so well together. Way to go!

[@anthonyquillen5300]

We spent our growing up years doing this under a shade tree. 41 and r6 chevy 's 63 panel chevy 48 panel chevy 52 chevy panel .We loved it thanks for doing these shows

[@clintonsmith9931]

See the pretty ceramic block on the firewall It is a resistor to drop voltage to points after the engine starts A wire runs directly to starter from key start position to bypass resistor when starting When in run position voltage runs thru resistor to prevent burning up points Still have flexible tool to adjust points while running Good luck

[@michaelszczys8316]

That’s right. Connect jumper wire to t.

[@danmybusiness1167]

I once replaced the coil on a Ford Escort without knowing about this voltage drop. In the Escort it was done with some kind of internal resistance wire (never found out exactly how it worked). Never could get it running with the non-standard coil because it never received enough starting voltage. Good learning experience, without costing too much.

[@howardkoster4026]

GREAT TO HEAR ANOTHER TRI-FIVE CHEVY COME BACK TO LIFE!!!!

[@ViceGripGarage]

Save'em all!

[@archieacevedo2955]

So glad for the lack of commercials here. I’m blown away by your southern pace. I spent 6 months in TX about 30yrs ago and just now remember how laid back it was. Funny how us New England boys are so strung out. Stay Safe. Love your videos.

[@399Martina]

That almost looks just like my first car, only mine was two tone, yellow and white and I bought it for $250.00 in 1965. I drove it all through high school and my dad kept it for me when I went into the navy. I drove it for 5 more years when I got out. I loved that car. You brought back a lot of good memories for me, thank you. I would be interested in buying her if the price is right.

[@sunking2001]

You guys are great. These old cars and old boats...have souls. You guys are reviving their souls. I'm 68 and can appreciate what you're doing.

[@kevinkroll6456]

To all of you out there now here is something us fans enjoy (this channel )! I hope that all of you are in good health, during this shut down ,and trying to cope with that is happening I agree that there will be a light at the end of the tunnel! So sit back and let TURNIN RUST take us to dreams of owning one their creations and admiring that long drive on a prefect day ! I strive to be one of the lucky people to sit down across the table from these people and discuss what I want in my new ride to be ! And to let them put it over the top as they so often! Wow ! Could it happen, so for now I sit back and let them take me on that ride that my dreams would be? So thank you for supporting them and so can that ride with you all .God bless be healthy!

[@pablojones5613]

If any car that you have ever got your hands on is worthy of a full restoration, it's this one. They are a totally iconic car worldwide, and if I could pick one up at that price, (approx $3050AU) I would be weeping tears of joy for years. You won't find one in that condition over here for less than $12,500 USD. They actually built these in Australia for a while, but as far as I know, they were all stovebolt sixes. Please (🙏) give this amazing car the attention it deserves.

[@johnavon3467]

Hello From England. I’ve been loving these videos. For some reason I can’t stop watching you guys doing the rescue and they look beautiful to me in their rusty state. I think it’s a profound deep experience going back in time and reviving something old and beautiful. I’m no mechanic, I’m an artist. But see huge creativity in your problem solving. The icing on the cake is the way you both seem kind and patient with each other. Beats Netflix :). Best wishes John. Ps I used to own a 59 Sunbeam Alpine GT red sports car, and my first ever vehicle. Just wonderful.

[@anotherlooktoo5985]

There is a window on the distributor cap that allows for a special flexible allen wrench to enter and you can adjust the points on the fly with a dwell meter. The choke tube goes into a hole in the right side exhaust manifold. Strange I should be writing about this, but we worked on many a vehicle in our time, and most of it was without any computers.

[@socalRooster]

I like how you walk us through the process no editing no music in background very 👍.

[@marksalisbury6422]

Thanks guys ; my dog was put to sleep today ; this helped me take my mind off things ; all the best from Brisbane Australia

[@cj8172]

Sorry to hear that brother, Ive been thru that before too. All the best from me in New Zealand

[@MTFOphantom]

I wish you the best man. All the way from the US

[@williamcarey6592]

Agree change the oil and ideally drop the pan and clean it and the oil pump screen

[@ViceGripGarage]

Excellent as always Gentlemen! Nothing better than a black cup of Coffee and some V8 Crankin' on a Saturday morning.

[@alexstoppa7026]

Hey man a guy wants to come with and learn how to fix on old cars like you

[@alexstoppa7026]

I mean a guy can fix on. But I want to learn more

[@RustyZipper]

Alex Stoppa - learn by doing. Do some research and buy something that runs, drives and not rusted out. You’ll find plenty of other stuff to fix. Don’t fall for that “ran when parked” always ask: “why did they park it then” and “why are they selling it” if it’s in such good shape?

[@alexstoppa7026]

Yeah but this guy is hilarious. And hes always doing some cool shit with cars in the woods. I prefer the "ran when parked" sales

[@dylansheets9837]

@@alexstoppa7026 ff

[@plymouthduster2252]

Great video. I have actually seen that car before. I live in Idabel Oklahoma and that 57 sat in a abonded gas station stall next to a red 57 2 door hardtop. The man who owned the station sold it and took the 57's along with a few other old cars to be auctioned off the man's name was Ferrell Jackson that owned the cars and the gas station. I dont know him myself but my Uncle does. I wasn't expecting to ever see this 57 again. I was born in 1991 and that was car was in that gas station as far back as I can remember. So I guess that was were it was parked in 1985. Glad to see it found a good home.

[@josephcivita1450]

On these older cars you have 2 small terminals on the solenoid. One is the trigger. 12 volts to it engages the starter. The other goes to the + side of the coil. It feeds 12 volts to the points for a hot start. Once the car starts and the solenoid is released power goes to the points through a resistor wire dropping the power to the points to 9 volts. It makes the points last longer.

[@Scratchingforcash]

Love the video guys, however there are a few things I would’ve did first before cranking: 1. New oil 2. Set points 3. Coolant 4. Drain whatever in gas tank & replace 5. Put a new belt on missing alternator belt 5. Lube up cylinders before cold crank

[@Blacktop_Rabinowitz]

I was also worried about cranking it on dry cylinders. They could’ve squirted some Marvel down the plug holes and examined the plugs while they were doing so.

[@Scratchingforcash]

Dave Micolichek

[@markamcampbell6340]

it's fun watching these young kids learning how to adjust points. 1/8 inch Allen head and a match book cover.

[@michaelszczys8316]

Chevy had the magic distributor you could adjust while it was running. You adjust the points and timing by ear.

[@djrose3]

Please, please do this old girl up right! Looking forward to more on this project!

[@davidwestmoreland3909]

You guys are something. Enough bailing wire and a 2x6 will always work. If you continue to work on old GM cars you need a dwell-tachometer to adjust the points. I have one I’ll give you if you want it.

[@alanstant9356]

I was with you guys the whole time watching to see if I can hear it run. It was worth it to hear it. Still got some things to take care on it but that was a very good find guys.

[@steveshoemaker6347]

The hood alone is worth more than you paid...For the whole car...Thanks guys fun to watch...God Bless...Stay safe....!

[@chopperbaldwin610]

That is a beautiful piece of art just the way it is. I can't wait to see how it looks when you are all done with it. Keep up the great work and Rust In Peace.

[@joanneachildoftheking4199]

I grew up with this car. Ours was new and the color was coral. Dad’s pride and joy. Really enjoyed this revival! Just found this channel from your Restored channel. Cheering you on for success with both.

[@shaunarneil586]

Hi I'm jor biegistbl van😜

[@TheBonsaiZone]

I went on Google street view and found your shop and the car wash while I was watching the video, a very cool small town!

[@georgegagnon199]

I wish l could find a deal like that in bc

[@iqbalramadhansaputra597]

Saya pergi ke tampilan jalan google dan menemukan toko Anda dan mobil Mencuci Sementara Aku mencuci Dulu Menonton Vidio tersebut ,a

[@TheBonsaiZone]

@@iqbalramadhansaputra597 Itu adalah terjemahan ke bahasa Indonesia!

[@markamcampbell6340]

all of a sudden you got the door open and found a key. a miracle. just change all the hoses and wires, and of course, the oil and antifreeze although you don't need coolant to start the engine.

[@mattparoz4246]

Love the 57. The smiles at 1:29:30 is priceless. I watched this episode after Live streaming our church’s Easter Sunday Service.... Happy Easter and God bless 🇦🇺🤙🏻

[@jpalberthoward9]

This is a really great tribute to the way they used to build things in those days. Made to last, easy enough to maintain so that you didn't need a PHD from MIT and a half million dollars worth of tools and diagnostic equipment just to get running again. You guys did a great job of showing everybody what you can accomplish with the bare minimum of stuff. Now that you know what you have, the fuel pump, carb kit and ignition switch are justified. This is the old school way, like my grandpa and my uncles taught me. It's too bad they don't build things based on logic and common sense any more. I totally enjoyed watching both of these 2 vids.

[@obesefeline]

Thank you for this wonderful experience, in this tough time, your video brings much peace to my mind. Well done gentlemen.

[@johnmorgan5377]

Hi boys your doing a great job I gave up doing my rescues I am 72 I love finding old cars and starting them I did a Buick straight 8 woodie still doing it

[@chuckhaynes6458]

Change the oil. Then while it's draining take a good look at the choke and throttle linkage on that Rochester 4GC carburetor. The throttle must be cracked to re-set the fast idle cam and allow the choke plate to close. That is why you pump the gas pedal at least once on a cold engine. Re-install the heat tube to the exhaust manifold so the automatic choke will open. If you can find a "Motors Manual" from the early '60's buy it. Therein lies a wealth of knowledge.... good luck. Oh btw the generator with the armature drive for the Power Steering pump is Gold. That drive is also used for the rare unobtainium factory Tachometer.

[@thesmokydig]

happy to see your channel restored and glad to be a member again God speed and God bless you all

[@jaydogsgonefishin5547]

I would change that oil because as soon as it warms up all the sludge will break free and go threw your motor

[@jaydogsgonefishin5547]

Hearing it run and getting it up to temperature and driving it is 2 things lol

[@curtisvonepp4335]

@@delwhylie4748 I definitely would flip that car 🐤

[@thekingsilverado9004]

@Jason Blackburn>>>> Most professional shops would not open the hood and start pulling on parts without first power washing the entire car period. The process most professional shops like mine use is the first step is washing the car entirely particularly under the hood. The oil gets drained spark plugs radiator and distributor get pulled plug wires old points go in the shit can sometimes the distributor itself ends up there. After the radiator comes back the freeze plugs get examined before any water or coolant go back in the car. Shitty hoses get replaced. No professional likes to see a hose rupture of the engine suffer a mysterious mechanical demise from old sludge and shit blocking the oil journals in the engine. So what these guys R doing disgusts most of us that call ourselves professionals. In no way would have started fiddling around in that engine without getting all the crud out of the way first. We also go over the transmissions and examine old clutch and throw out bearings. Folks do not realize just how easy it is to get a vehicle stuck in gear and have it freeze up in gear. At times trying to force a car back out of gear where it froze can cause a catastrophe to a gear box. I find the car in the video interesting. I find the hosts being a pair of Boobs.. There is a shop here local to me that can a do beautiful job on those old brass and copper radiators. To me these guys offend people like me that call themselves a professional. What happens is videos like this give assholes bad impressions on what a professional restoration shop does do. What happens is shit like this starts arguments that I shoulda just done just this or that. More over we have severe winters and storms here which alters my approach at how I prepare a resto mod job.

[@thekingsilverado9004]

@@gmc1284 John politely understand what these 2 guys are representing gives other folks thee very wrong idea how a professional approaches getting an old wreck running again. Now if you can only reach deep down in your confused mind you can consider what I mean. I have people that drop stuff off here and get a very wrong impression on how a Pro Shop approaches this work. I am sorry you are not capable of understanding the fundamentals of this work and the problems videos like these can cause. Just like those videos of guys going creeping around property and personal items left on remote and rural properties. It causes problems. It would be a lot diff if these two guys did not represent themselves as a professional shop. Even the happy the clown wires and battery can be dangerous just have a rouge unintentional spark hit gasoline and see what can happen to a person or their home or garage... These videos give the totally wrong impression of what a Professional shop does. Not to mention as the fiddle and fuddle with a 5 gallon gas can nearby you don't see a fire extinguisher in sight now do ya. I just about duct tape one to my ass when I am fiddling with an old engine that might spark arch or errupt into a ball of flames from the timing being off. Sorry U are not capable of understanding the extremeness of the dangers here in this video

[@Mark-nu5vg]

@@jaydogsgonefishin5547 These guys do a good job of gettin these olds girls up and running

[@edwardlautsch8539]

My daddy gave me his 57 chevy to learn how to drive on the farm. Your video brought back many great memories of it. Daddy was a chevy man all his life. Thanks for the video! 👍

[@whiplashmclash192]

Anyone else cheer when she started? Man I love old cars!

[@michaelszczys8316]

I don’t cheer and high five and all that,I’m too busy listening to the engine. People cheer and carry on while the motor is self destructing from no oil or something.

[@martinharris5017]

Lockdown boredom buster! Just what the doctor ordered for my anti-COVID treatment. Bless you guys, keep 'em coming!

[@michaelbaka4777]

FYI: V-8 Chevys had a "V" on the trunk lid and on the front of the hood in the Tri-Five era. If it's silver/chrome, it's a 265 c.i. If it's gold, that's a 283 c.i. Just sayin'.

[@josephbartolotta4330]

Nice tip Michael

[@JeffCKeane]

Yes, thanks for that... I did not know that... Nice little detail when I build my tri- five plastic model kits! LOL!!

[@betagamma8298]

silver for 150 and 210, gold BA any 8 cyl

[@janettelworth9398]

I'm the 3rd oldest of 7, but sometimes I wish I'd been born a boy because I love you and your dad's talking under the hood and I love cars and motorcycles, and everything old. Thanks for sharing. Enjoyed this footage.

[@gregblalock96]

When changing tires on the wheel that are on the 1957 .... You dismount them from the rear!! I changed a lot of them back in the day.

[@michaelszczys8316]

I don’t think so. Unless they are chrome reverse wheels. Been doing tires by hand since 1968 and 99.999% of wheels come off the front. Which makes it tough for nice finish wheels. You have to pad your tools. 57 Chevy steel wheels are same as any.

[@suotommi8352]

Greg Blalock is correct. ’57 steel wheels are different that way. Many of those wheels ruined by doing it the ”standard way”.

[@Caddichris]

Thank you for posting this video! It’s nice to see a father and son team, reminded me of my dad and I!

[@irinacollins3099]

Hurry up this quarantine is killing me. 8 days in I've seen everything on youtube.

[@Abhishek-C92]

Irina Stay safe stay home.

[@randomperson4318]

i watched everything about everything ...they can shut down youtube ,theres nothing I havent seen these days lol

[@Abhishek-C92]

@@randomperson4318 u cant shut down internet nor fb,nor youtube.

[@randomperson4318]

@@Abhishek-C92 yes you can ,you can shut down youtube if you are a CEO at google. Everything made by humans can be shut down.

[@Abhishek-C92]

@@randomperson4318 but anyways me bored at home. stay safe man. and fck china .

[@jeffrobbins2318]

Great video and great to see Father and Son working together. God bless. Jeff UK

[@draculasgrl]

It's American, that's why, they can set for year's then fix em up, and run like a champ

[@slmmdgg]

no Chinese flu there

[@mick00000000002]

All old engine's not matter wear. All will rust in side. Scoring is bad mate.

[@andrelundahl9578]

Ggghfh

[@andrelundahl9578]

Grymt

[@joeldoxtator9804]

@U can't fake dermal ridges Modern american cars are built from chinese junk, there in lies the problem. They can only claim "assembled" in america.

[@thewhitedogdad]

Oh man you guys are cracking me up! Adjusting the points on a Chevy distributor used to be something I could do in my sleep. Normally these points are designed to be adjusted with the cap on through the window in the cap. I wish still had the tool for that, cause I'd send it to you. Lord bless you Brothers

[@ShilohShepherd]

Be sure to check the neutral safety switch. I had to jump start my 57, with a screwdriver to the solenoid, for quite a while before I thought to check it.

[@Drood39]

That four door really grew on me watching this video. LOVE it and I'd definitely restore the old girl.

[@jackjacke4654]

Now your dad should know this. Old engines old remedies. Put a match book cover in those points!

[@MrJimmymeeks]

Match books are about as rare as 57 Chevys now days.

[@garysmith5781]

Yep, I have done that on the side of the road a few times, works great..

[@denverfowler5290]

CAN'T STOP SMILING , GREAT JOB FELLA S , SOUNDED JUST LIKE CHRISTINE ♡ ! !

[@danielsmith9500]

My brother has a 57 four door. She needs some love but it runs. It’s got the original motor but has a different trans in it

[@briangrogan910]

Brought a smile on my face when it started and when it got on the highway again since 1985! You guys should raffle it off! I aould love something to work on during quarantine! Stay safe guys!

[@tomtruesdale6901]

"Check the parts numbers?" LOL here about the battery cables.

[@NYWF]

On the slim chance that you guys read your posted comments, I would like to plead with you that if you do end up just flipping it, that you will sell it to someone who will restore it to stock showroom condition. This is a rather rare example having factory power windows. This car really deserves to be restored to stock and not turned into a modified or customized piece of crap. Factory original restoration all the way. Thank you for having saved this gem!!

[@pkerit308]

5:15 Forcing an engine to run after its been sitting for 20 or 30 years is Not a good idea. Valve springs that have been compressed for that long will not extend to full length. Even if it runs, it will run gently, not correctly. Gaskets and seals are going to leak, and damaged parts are going to be MORE damaged. If you MUST turn the engine over, take the plugs out first then put a light oil such as diesel down the sparkplug holes to lubricate things. An engine teardown and inspection of all parts, clean everything, hone cylinders, do the valves and seats, reassemble with new gaskets and parts as needed can give you a good engine with minimum cost

[@Yotraj]

Old mechanic here. Yep that allen wrench is how U adjust the points. Put q dwell meter on it, with everything together, spin the motor and adjust while spinning.

[@mick00000000002]

Cold start. Will you guys ever put oil in the heads. Wind by hand. Or at least run two stock oil in fuel. Take care . Stay safe from vires.

[@thomasjasper9143]

And make sure that the choke an fuel pump are working too

[@bad71charger]

Really cool video. I’m a mopar guy at heart but I dig this kind of video... bring her back to life.

[@christopherspencer1900]

Personally I think you should restore the Chevy. You basically have a complete car.

[@jeffreyb6165]

The 4 door 57 is in very low demand. You probably couldn't get back the money you invested to restore it unless of course you want to keep it for yourself, but again.....having 4 doors makes it far less desirable to most.

[@hrgaming7303]

Brings back time when me and my dad work on old cars together love your guys video s keep up the good work

[@davidzuravel8723]

Y'all need to make a turning rust music album, I've learned about so many cool bands from your videos! Love the episode, keep it up!

[@slyguyaction]

Could spend all weekend watching revivals like this. Thanks guys!!

[@dnuttall2363]

best and nicest 2 guys on youtube love this show its the best sitting here in quarantine in the uk thanks for this awesome content

[@tommywong3291]

Just picked up our 4dr 57 four days ago as well, needed drivetrain, just got done with the top in accessories tonight! Watching this has me motivated to get it running tomorrow!!!

[@gregwallace7092]

I would rather have a two door , but hey it's a 57 Bellaire and finding any of them in this condition is good find. I would love to have this car, get everything mechanically sound and drive it daily. It's nice to have a awesome old classic car all fixed up and beautiful but u don't want to drive them much except to car show or a short Sunday drive, but I would like to see them just the shape they are in (long as not falling to pieces lol) and see them on the road as daily drivers, that would be great...

[@thomasjasper9143]

Four doors are now cool also always were

[@justinraystyles3537]

I like 4 door cars but a 2 door will work for me if I can't find a 4 door

[@pamelalee1841]

I love it when you both SMILE FROM EAR TO EAR !! I learned to drive in a powder blue white top '57 Chevy Bel Air .. nice work!! As usual!!

[@JBell-gm5vx]

I too had a baby powder blue '57 Chevy in high school with a factory continental kit on the back!

[@WEIXELTOWN]

I would really like to see a budget restoration with wd-40, Lindseed oil and rattle cans. A restoration under $500. You guys up for a challenge?

[@jrsgarage7623]

Awesome sign on name bro

[@Stubbykca]

I had a 57 Chevy 2 door Hard Top back when I was in my 20s & loved it.

[@RandomDude989]

$1,900 for that! You got lucky. Around here (Mid Michigan) its be closer to $8,500 - $10,000 for that the way it sits.

[@billybarrett2778]

Yeah that's a steal anywhere!

[@hessjason]

yea, how does a mortal get a deal like that? Next he finds a 55 nomad for how abouta tree-fiddy?

[@hessjason]

@Dave Micolichek Can you point me to a 55 in decent shape for decent money?

[@Play-ue8bp]

This iconic car is very popular here at the other side of the pond. It's very inspiring to watch you bring her back to life.

[@andybigbs9466]

Love watching this .. love what you and ya dad do! From U.K. 🇬🇧

[@MARKLOCKWOOD2012]

Check trans oil if it’s burnt. With the rarity it’s worth complete restoration then the flip is more bang for your buck.

[@aurktman1106]

The sport sedans are my favorite! I’m trying to get mine finished.

[@ESmithStringSlinger]

Four door hardtops were great!

[@davidbush5323]

I watched this video and it was awesome, my favorite part of the video was your smile while you were driving it at the end

[@GTA5Fan2012]

did y'all end up getting that International Scout?, would love to see that get going again.

[@alswraps6294]

It's so cool how you work with your Dad and ride with you.. It's like ride together, die together..👌

[@Jdoggy2448]

Badass find! Good job fella's, stay blessed!

[@robertwells1650]

Good job guys! My son got a 1958 Chev Delray for free. It has a 6 cylinder and a 3 speed column shift. Had not run since 1986. We spent 3 or 4 hours on it and got it running well. Looking forward to seeing what you are going to do with your 57. God Bless

[@chestertoothman2631]

Makes me want to go out to the garage and work on my 57.

[@garysmith5781]

Well, get out there...😁

[@57Banjoman]

I'm not normally a jealous guy, but that '57 is killin' me-awesome project!

[@jeffreylehn8803]

power steering , 4 barrel and power brakes pretty rare

[@nv1493]

Iconic shot of the car in front of the old barn. I got my Belair on the road in 1990, still own it. Part of the family.

[@WilliamSmith-nm6wt]

Clean up the interior, fix driver window, buff out yellow paint, drive her the way she is.

[@sandyadams9446]

Ya, cause I get seepy in SLO mo real time. You have the tec to do so. Take a look at,Cole the Corn Star, to see what I 'm sayn.

[@tangotango168]

Great getting the old cars back to the streets ( awesome )

[@dmiller1770]

I forgot this door don't open then shortly later ITS MAGICALLY OPENED wow lol

[@marvinalancornell8275]

D Miller GOD opened the door my friend.....HA HA HA

[@indyjones3287]

We call those mud daubers, up here in Kansas. They got in the cylinders of an IH 656 tractor of ours, wouldn't crank. Pulled the plugs tossed WD-40 in and cranked. Oily dirt was flying out. Crazy how strong their nests are.

[@tomrausch7014]

Did I see what I saw at 49:10? Open fuel tank right next to wires being touched to battery post? I’d hate to see you going home too soon.

[@Steve-nu8xt]

Confidence is not removing the hood. Great video.

[@kevinhollister947]

I find it a little odd that we are looking at 1995 as a long time ago. I mean where did the time go ?

[@jack002tuber]

Levitating skateboards are coming next year

[@mikehayes9679]

gone like DeSotos

[@nonelost1]

That was 1985 that the car was parked.

[@GlamStacheessnostalgialounge]

@@jack002tuber Man, Levitating skateboards were 5 years ago! Unless there's another movie which mentions them in 2021.

[@olspanner]

Flew for me mate. lol.

[@guyfromthemidwest8583]

Man you got an absolute steal for that car. I fairly complete ‘57 for $1900. You can’t beat that. Excited to see this car on more videos!

[@radicalfilmz647]

I wish me and my father could do this stuff cherish the moments man Great video looking forward to future videos

[@pauldegano5724]

You guys are so calm and work great together I wish I could say that I can keep that calm on my restoration of my 52 Chevy truck

[@jamesmoates8490]

My cousin Lord Bless the dead had a red 57 he took it to get gas and the young attendant did not where the fill cap was at he had to tell him it was in the tail fin. this was in the mid 80s

[@eddybaby58]

wow...an attendant that pumped your gas...wow.

[@wagonmaster1974]

Four door hardtop [as opposed to a sedan] is way harder to find than a two door hardtop. Technically called a Sport Sedan.Good find. FYI, the gold anodized trim indicates a Bel Air. P/S, P/B - likely a 283, the 265 went away in 1957. Looks like a well optioned car. Will be following this one. I had a 56 210 Del Ray four door hardtop [Sport Sedan]. Loved that car for 15 years. Mine was a 265, three-on-the-tree, P/S and P/B car. The power steering pump on back of the generator worked just fine. Big purple wire feeds the starter. Rochester 4 jet carb. Predates Quadrajet. Square bore/base. Be sure the throttle pressure rod to the transmission is in place and adjusted properly. Important to shift point and longevity of the cast iron PowerGlide. There is a special flexible tool, like a long screwdriver, just for early GM distributors. Worth the investment. Goes through the point window of the cap, adjust the dwell with the engine running. About 28 degrees should work. The rotor will only fit one way.

[@davidhobbins3636]

Son: Looks like there's some green stuff in the radiator. Dad: That's-not antifreeze.

[@davidbrickey5925]

Well look like to get the old girl up and running. I’m sure you’ll be able to flip it. Enjoyed watching you guys work on her.