1962 Volkswagen Bus, VW Type 2 - RESTORATION!!! Engine Removal!!! VW Panelvan, VW Kombi, VW Bus

This 1962 Volkswagen Type 2 Van/Bus has been siting for over 40 years. Let's see if we can bring it back to life!

[@CTmoog]

Hello Everyone!!! Thanks for watching!!! - ＬＩＫＥ | ＣＯＭＭＥＮＴ | ＳＨＡＲＥ | ＳＵＢＳＣＲＩＢＥ | Press the bell Icon - THANK YOU!!!

[@thomaspeeples9297]

CT moog can i get a shout out i want 1 sub plz😂

[@johnrambo72]

ok, friend!! Russia-like

[@sylvainmailloux6253]

Greatfuldead t-shirt ! I’m sold 😉

[@charger19691]

I could spend the rest of my life bringing old cars or anything with an engine really, back to life. Enjoyed this video and thank you for sharing!

[@CTmoog]

Hey Danny! Me to brother! I really enjoy it! Stay tuned for more! Did you subscribe?

[@charger19691]

CT moog , yes I subscribed👍🏻

[@CTmoog]

Thanks Danny!

[@davidk6271]

I’m real envious of your nice shiny floor and those dollies you use to push the van around on, i just have gravel on the floor of my shop, one day! Thanks for sharing.

[@CTmoog]

Hey David! These floors are 59 years old. The house was build in 1960. But they are in pretty good shape! The dollies are new! =) Stay tuned man! Did you subscribe?

[@davidk6271]

Yep subscribed

[@waikiki6969]

Amazing how you can do it all by yourself. I would have to summon the whole village for help haha.

[@CTmoog]

Hi Sam! Thank you! I really do enjoy it! Although some help would be nice!!! Did you subscribe? Stay tuned for more!

[@waikiki6969]

Yes I have subscribed. Keep it up and I really like to see it fully restored:)

[@michaelclutton8446]

Thanks for the video, I really enjoyed it. You have one heck of a lot of work ahead of you, hope you have the conviction to get it done. It will be great watching you work on it Regards Mike

[@VWLifeVW]

that is going to be the key to the project :)

[@Victorinot]

Enjoying this a lot, make more soon. At the beginning took you for an average Joe but after these videos, it's obvious you know what you are doing.

[@CTmoog]

Hey Victor! I really appreciate that man! Thank you! I'm learning as I go! Stay tuned for more!

[@idkutet]

Wish I had some of your weather !! Enjoy watching ‘Rusty’ get the love he deserves

[@CTmoog]

Thanks man! I hope it clears up for you soon! Stay tuned!

[@romuhamsteri]

Another great episode, thanks!

[@CTmoog]

Thank you!!! Stay tuned for more!

[@Mr.-Wint]

The devotion put into this never ceases to amaze me..

[@CTmoog]

Hello! Thank you! I really do enjoy working on theme! Stay tuned for more! Did you subscribe?

[@Mr.-Wint]

Sure did !

[@joshuapoche5137]

Man watching all these vw videos and different channels really makes me wish I had a little more time right now to work on my personal project and possibly video it for youtube

[@CTmoog]

Hey Joshua! I hear you man! We can all use more time and money! I hope you find some soon! THANK YOU!!! =) Stay tuned for more! Did you subscribe?

[@joshuapoche5137]

@@CTmoog oh yea and hit the bell

[@CTmoog]

Thanks man!!!👍😎👍

[@1530ng]

I admire your conviction and enthusiasm. "Rusty" perfect name!

[@CTmoog]

Thanks Daniel! I appreciate that man! Yes "Rusty" seems to be a good one! Stay tuned for more!

[@VWLifeVW]

Yep

[@shuflan12]

Nice tool for standup engine, you cut out engine alone man awesome 👏...💪

[@xavierjacques73]

Muuuuaaaah Super video Can't wait to see the dissembling and reassembling of the engine after cleaning and repairs

[@CTmoog]

Thanks man!!!

[@jeremysomeone]

Nice to see another video uploaded!

[@CTmoog]

Hey Jeremy! Thanks man! I appreciate the support!!! =) Stay tuned for more!

[@MrWoodfiddler]

CT - love this project. Your work area is immaculate and tools and skills are top notch. Enjoying your videos! Chuck in NE Kansas

[@CTmoog]

Wow! Chuck! Thanks man! I really appreciate that comment!!! =) Stay tuned for more! Did you subscribe?

[@geoffreyjones2000]

Love your v dubs and your dog friends. This is gonna be fun. Thanks for sharing peace

[@CTmoog]

Thanks man!!! Stay tuned!!!

[@dustbuggy]

Wow this blew UP! Congrats man, you deserve it! Looking forward to the restoration 😜

[@CTmoog]

I know it's crazy! Thank you so much! I appreciate that! Keep at it! Stay tuned!

[@marcijunebug]

CT awesome as always! Great shirt! And rusty is the name of my double cab! A very Fine name indeed!

[@CTmoog]

Hey Marci! Thank you!!! I thought that name sounded familiar! =) It's kind of like my name "Matthew" Seems like everyone is named Matthew!!! =)

[@nikitaivanov1536]

Crispy crust bus (name for this wonderful machine:) Nice to see another video uploaded!

[@CTmoog]

Great name! Thanks man! More to come!

[@jerryf609]

Greetings from Michigan. Rusty is a great tag. Following this for sure.

[@CTmoog]

Hello Jerry! Thank you! Rusty seems to be the one! Stay tuned for more my friend!

[@markfreeman408]

That's awesome!

[@Steve-j-morgan]

Good luck with this one ..looks like a lot of work ...I will keep watching

[@tonypeters8298]

Well done CT, another great video. "Rusty" perfect! Down under we would call it "Ozi Red". I use a motorcycle jack to remove engines. Very stable and maneuverable. Looking forward to more! Cheers.

[@CTmoog]

Thanks Tony!!! Oh I like that name! That's cool! Good idea using the motorcycle stand. I might have to pick up one! Stay tuned!

[@jimlong527]

Lot fun doing restoration, this is going to be a fun project for you and bring back Rusty.

[@CTmoog]

Thanks Jim!!! It is a ton of fun!!! =) Thank you! Did you subscribe? Stay tuned for more! =)

[@xavierjacques73]

Yipee You're back Love that crate

[@CTmoog]

Yes!! Thanks man! Stay tuned!

[@felipec.1234]

Hello, i'm from Brazil and i'm loving your videos. I have a 78 Vw fusca/beetle, the aircooled are a national passion for us. Thank you for sharing your knowledge 👍

[@CTmoog]

Hi Felipe! That is so cool! Brazil is an amazing Country! The 78 are really nice! THANK YOU!!! Stay tuned for more!

[@sarkislab5698]

Tenho um Gol GT 84

[@akubudakladangtebu]

..long way to go...RUSTY! ..the show just started...good jobs...👏👏👏👏👏👏 You are excellent in engineering..

[@CTmoog]

Hi Jaz! Yes, long way!!! It should be a fun journey! Thanks for watching! =) Stay tuned for more. Did you subscribe?

[@erykcz6031]

I can't wait for a repaired engine, great work!

[@CTmoog]

Hello Eryk! Thanks man! Stay tuned for more! Did you subscribe?

[@erykcz6031]

Yes I did and I'm waiting for the next episodes!

[@kevfrets]

Cool! Looks like it rolled off the set of a Mad Max film. Holy rust!!

[@CTmoog]

Hey man! I know it's been though hell and back! Stay tuned!

[@TheShadeTreeFixitMan]

Good stuff Matt and now you have become a KZbin Star!

[@CTmoog]

My friend George! You have helped me on this journey sir! My hat is off to you! Keep making great videos! THANK YOU!!! =)

[@trevorockwell8764]

The crudity of the engine loom is quite amusing, particularly with those spade connectors on everything lol

[@CTmoog]

Hey Trevor! Yes, that is some old school technology but it works! =) Thanks man! Stay tuned former!

[@bintuweel]

Hi there, I was about to write to you today to ask about grandma, but you were faster than me . She is still looking good .

[@CTmoog]

HAHA! That's funny! =) Stay tuned for more of grandma!

[@bintuweel]

@@CTmoogYes iam looking forward to see grandma recovery from deathbed .

[@armandosalinas7104]

Another great video thanks 😎😎

[@CTmoog]

THANK YOU! Stay tuned man!

[@mathewsotieno1422]

Looks good bro,cant wait for the next episode

[@CTmoog]

Thanks man! I appreciate that a bunch! Stay tuned for more!

[@catbolinha5452]

Dude is very nice to watch you work in this vw Kombi !!! Kombi is name here in Brasil 🇧🇷! Keep going for more good vídeos! 👏

[@CTmoog]

Hey Scott! Thanks man! KOMBI ROCKS!!! THANK YOU!!! Stay tuned for more! Did you subscribe?

[@GettingNervous]

In Germany we call it BULLY 😃.

[@makari8819]

Excuse my english, im from Germany. CT, please hold up your great work and videos. This is so entertaining to me with all these visuals, sounds and little details. Iam realy in love with this van story. I wouldt call him rusty... to usual...i would prefer crispy :)

[@CTmoog]

Hello Makari! Thank you so much! THANK YOU!!! I like "CRISPY" HAHA Nice! Stay tuned for more! Did you subscribe?Hello Germany!!! =)

[@GoodOldMike]

Another fine job, CT!

[@CTmoog]

Thanks Mike!!! =)

[@tysonthewolfe93]

Great episode

[@CTmoog]

Thanks Tyson! THANK YOU!!! Stay tuned for more!!! =)

[@mk-kr3pl]

Great repair work!Looking forward to more new fixes!Looking forward to from Asia, Taiwan

[@CTmoog]

Hello 哈利mk ! Thanks man! I appreciate that! Stay tuned for more! Hello Taiwan! =)

[@andiwijaya3413]

Great job man.☝️

[@CTmoog]

Hello Andi! Thanks man! I appreciate that! Stay tuned for more! Did you subscribe?

[@GettingNervous]

You are a lucky guy. On modern cars you have to plug out hundreds of cables 😂. Nice work, nice vid.

[@fabritziobenitezorozco5574]

Saludos son Excelentes todos los vídeos de esta Combi. Se aprende mecánica ,historia, y arqueologia. Muy buenos.

[@CTmoog]

THANK YOU!!! =) I really appreciate that!!! Thanks for watching! Did you subscribe? Stay tuned for more!

[@g.a.c.4470]

You lucky man, living in a warm climate. It was 10 degrees here today and yesterday. Your ferns are spoiled.

[@CTmoog]

Hey man! Yes it is nice here. I hope it warms up for you soon! 👍😎👍

[@busman5429]

A hand held impact screw driver works well on the screws holding the tins on, a lot of times the ones in the head will break, just drive out old screw and tap it, Your weather looks great . will be fun watching you dig into the motor--good camera work.

[@VWLifeVW]

those cheese heads can be a pain

[@CTmoog]

Hey Dan! thanks for the tip man! I appreciate that! Stay tuned! =)

[@VWJawbreaker]

Nice job man, looking good!

[@CTmoog]

Thanks brother!!!! =)

[@andre_rhp]

Esta muito legal a saga dessa Kombi ansioso pelos próximos vídeos

[@CTmoog]

Thank you!!! Stay tuned for more!!! =)

[@dannielescaleira7107]

Belo trabalho vc está fazendo..👏👏👏👏👏👏.

[@CTmoog]

THANK YOU!!! Stay tuned !!!! Did you subscribe?

[@pc_alievi]

hello, I'm in Brazil and I have a 1968 fusca. I appreciate your channel. Keep posting your videos, they are very interesting.

[@CTmoog]

Hi Paulo! Thank you! Wow a 1968! thetas nice! Stay tuned for more! Did you subscribe?

[@airheadvw4479]

That bus is sweet rusty is a perfect name no matter if you restore it or not good luck and have fun with it

[@CTmoog]

Thanks man! Yes, I like it! I think it works for this one! Did you subscribe? Stay tuned for more!

[@airheadvw4479]

@@CTmoog yes I'm subsribed

[@CTmoog]

Thank you!!! =)

[@mighunter9554]

I watch your videos with pleasure :) hello from Belarus))))

[@CTmoog]

Hi Mig! THANK YOU!!! Hello Belarus! I really appreciate that!!! Stay tuned for more!

[@mighunter9554]

@@CTmoog cool restoration)))

[@williamhumberhawk8187]

Hi from me over here in New Zealand. I have been following and I subscribed a couple of weeks ago. I like what you are doing with your van and I like the way it looks and I hope you might keep its outer appearance as it is.

[@ryuken2387]

Hay ta me llega esta quedando chiva la restauracion

[@nicolasramirez6463]

Excelente trabajo amigo, suerte te va a quedar increíble.

[@CTmoog]

Hello Nicolas!!! Thank you!!! Did you subscribe? Stay tuned for more!!!

[@555chevy]

I see some usual VW rust problems, but strictly that is not a rusty VW. Well worth saving. You have a good one there.

[@CTmoog]

Thanks Roger! He can be saved! Stay tuned!

[@robertsnyder5149]

Adjustable push rod tubes are a big plus too.And Brazilian seals for the motor. They don't leak and are red in color.

[@CTmoog]

Hey Robert! Thanks for the tips man! I will check into those! Stay tuned!

[@luishabila236]

Excelente trabajo ,muy buena restauración

[@CTmoog]

Thank you!!! Did you subscribe? Stay tuned!!! CT =)

[@Allmyvideohere]

Хороший видеоролик. Жду продолжения. Спасибо.

[@franciscoandresmontestorre1895]

Translation: “Good video. Waiting for the sequel. Thanks."

[@MichaelMcFearin]

Dude give yourself a beer, I know its only a VW engine but still pulling it by yourself.Bad ass bro.. ^-^

[@VWLifeVW]

like a boss!

[@yoalepa]

Buen vídeo amigo, esperamos pronto el chequeo completo del motor y sus componentes °!!! Abrazo

[@CTmoog]

Hi Yoalepa! YES!!! =) Thanks for watching! Stay tuned for more!

[@carlosamador5149]

Muy buen trabajo, ya espero el próximo video saludos.

[@CTmoog]

Thanks Carlos! Stay tuned for more!

[@antoniofernandopires5166]

tambem sou apaixonado por Karmanghia e Kombi parabens pelo trabalho

[@CTmoog]

Hey Antonio! Thanks man! Me too! Did you subscribe? Stay tuned for more!

[@MicBergsma]

Whoo! I like name “Rusty” 👍🏼

[@CTmoog]

Me too! Thanks man! I think that is the winner! =)

[@VWLifeVW]

yep, seems to be fitting!

[@CTmoog]

Thanks Matt!

[@hopsgarage5513]

Can't wait to see the inside

[@pauloportela6359]

Parabéns! muito bom seus videos

[@CTmoog]

Hi Paulo! THANK YOU!!! Stay tuned for more!!! =)

[@johnlennon6604]

Parabens...manda muito bem no que faz 👏👏👏

[@CTmoog]

THANK YOU!!! Stay tuned for more!!!

[@pradeepkuttappan2228]

Very very good my friend I like it you

[@CTmoog]

Hello Pradeep! Thank you! Stay tuned for more! Did you subscribe?

[@lucianosilveira3945]

Big job , vai ficar exelente ....muito trabalho pela frente ..

[@CTmoog]

THANK YOU!!! Stay tuned for more! Did you subscribe?

[@darkunicorn1208]

This will be a sweet ride once fully revived and restored.

[@CTmoog]

Thanks Allen! Yes it will! =)

[@liberdade_paz]

Tu és bom mesmo show de verdade parabéns .

[@CTmoog]

Stay tuned for more!!!👍😎👍

[@goriopukolo]

can't wait to see its new life fully restored running again...

[@CTmoog]

Hi Tata!!! THANK YOU!!! Stay tuned for more!!!

[@brocktillman1014]

Just wanted to say hi CT. Keep up the awesome job brother😊 peace, Brock

[@CTmoog]

Hey Brock! Thanks man! You too! Keep moving forward!

[@chuckrieger782]

CT.... 1600cc's have never looked so good!!! Awesome 👍😁 Can't wait to see you tear into it!!! Wolfsburg would be proud!!! Like the name Rusty too. P.S. your dogs are beautiful...I have 2 also... along with a gang of cats... I'm qualifying for Ark status here...lol!!! Keep those great videos coming!!!😁

[@CTmoog]

Hey Charles! I know right!!! I love these old engines! Oh man I love animals! Unconditional love! Unless you forget to feed them...=) HAHA Better start building that ship sir!!! Thanks man! More to come! Stay tuned!

[@VWLifeVW]

Well put

[@claudineiflorentino]

Que maravilha, vai ficar muito legal.

[@CTmoog]

THANK YOU!!! =) Stay tuned for more! Did you subscribe?

[@TheBiggadan]

The wonders of w d 40.. job well done..

[@CTmoog]

Hey Winston! YES!!! I love the stuff! It works great! Stay tuned! Did you subcribe?

[@TheBiggadan]

Did it the first time I saw rusty..😊

[@VWLifeVW]

yep, good to use on EVERYTHING!

[@autocrash6509]

Espectacular,saludos de México 😎

[@CTmoog]

Hello Mexico!!! =) THANK YOU!!! Stay Tuned for more!!!

[@garymucher9590]

I have no idea what your finished VW van will look like. But I'm hoping a total refurbish back to factory look and not just clean up and let the rust. Anybody can do that. Making it look like new again, takes a real effort and special dedicated skillful person. JMHO

[@CTmoog]

Hi Gary! We will have to see where it takes us! Did you subscribe? Stay tuned for more!

[@NizarGARA]

Rust everywhere, good work! waiting for next episode :) Viel Glück

[@dorfschmidt4833]

Daran kann er jahrelang herumwerkeln. Jedes Teil muß aufgearbeitet werden.

[@CTmoog]

Hello Nizar! Yes, he is "RUSTY" =) Thank you!!! Stay tuned!!!

[@NizarGARA]

@@dorfschmidt4833 Er kann andere KZbinrs bitten, ihm für ein paar Stücke zu helfen. Es gibt viele Kanäle, die sich auf die Restaurierung kleiner Stücke spezialisiert haben

[@dorfschmidt4833]

@@NizarGARA The amount of work is just crazy, I hope his wife won't be mad, see restoration of a Porsche: kzbin.info/www/bejne/r6SvoKupm8qUrLM

[@CTmoog]

Hi Dorf! Or we can just fix the mechanicals and drive it like it is? Thanks for watching! Did you subscribe? Stay tuned for more!

[@janetejaengalhardo6046]

PARABÉNS POR SEU TALENTO !

[@CTmoog]

Thank you! =)

[@01gusmind]

Un gran trabajo el que estás haciendo, y me gusta que estés haciendo videos de lo que haces, saludos desde México

[@CTmoog]

Thanks man! I appreciate that! THANK YOU!!! Stay tuned for more!

[@01gusmind]

@@CTmoog Of course, I will be aware of the following videos

[@stevewarren3051]

Take the fan shroud off and remove the generator. Check the inside of the shroud and the cylinder covers. Critters like to make nests in there when a car sits a long time.

[@CTmoog]

Hey Steve! Great idea man! I will do that! Stay tuned for more and thanks for the tips!

[@bianconegrelli6081]

Sou brasileiro e assisto seus vídeos, parabéns 😍

[@CTmoog]

Hello Bianco! THANK YOU!!! =) Stay tuned for more! Did you subscribe?

[@user-mx3eq3vd9n]

Woooow perfect😍

[@CTmoog]

THANK YOU!!! Stay tuned for more!!! =)

[@martennyman6624]

I am born 1962 so i like your van

[@CTmoog]

Hey Marten! That is awesome man! Thanks for watching! Stay tuned for more! Did you subscribe?

[@geoffreyjones2000]

I'm a 62 model also...just not in such good condition peace

[@serkankutlu8072]

Hello good evening 1962 model van T1 is happening ? Thenk you :)))

[@CTmoog]

YES!!! THANK YOU!!! Did you subscribe? Stay tuned for more!

[@martennyman6624]

@@CTmoog yes...i did...

[@VWLifeVW]

Once you take out the gearbox. It's going to be in one location until you can get it back in you won't be able to roll it around anymore. Also you're going to want to take out the whole shift Rod Tube and clean it and put on the new bushings and little shuttlecock things. Make sure you're already spraying the shift Rod coupler now. I would not be surprised if you end up having to cut it off. Those things get seized on there. It's the coupler that connects the front shift rod with the back shift rod

[@CTmoog]

Hey Matt! Thanks for the tips man! This one took a hit or was moved around in the junk yard. The spring plate is bent on the passenger side. The engine and transmission mounts are busted as well. I'll take a close look at the shift rod coupler! Thanks man! Very Helpful!

[@busman5429]

@@CTmoog Matt right about the shift rod even on my 1967 it was a challenge fyi I Matt our channel stickers is in the mail hrading your way.

[@CTmoog]

Dan, do you have my address? hit me up ctmoog@gmial

[@kevinstewart8]

Love the project and of course your shirt! Deadhead for life brother!

[@CTmoog]

Thank you!!! Yes you gotta love the Dead! Did you subscribe? Stay tuned!!! =)

[@kevinstewart8]

@@CTmoog Yup! Looking forward to more videos!

[@homildoalmenara]

Sou novato no canal .e estou adorando

[@CTmoog]

THANK YOU!!! Stay tuned for more! Did you subscribe?

[@littlemoto2279]

Thank you for your vdo..

[@user-ty5en8fo6g]

Основательный подход.молодец.

[@CTmoog]

Thanks man! THANK YOU!!! Stay tuned for more! Did you subscribe?

[@maninjimenez]

#Super 😎 ya mero queda chida

[@douglasf.santos823]

Muito bom gostei um super like

[@CTmoog]

Hello Douglas! THANK YOU!!! =) Stay tuned for more! Did you subscribe?

[@umitaltuntas9462]

Greetings from Turkey

[@CTmoog]

Thanks man! Hello Turkey!!! Hi from Central FLorida! Thanks for watching! =) Stay tuned for more!

[@atikizlife]

Siempre aquí always here

[@CTmoog]

Thanks man!!! =) I appreciate that!

[@AntenaGames]

Show man.... More videos please...

[@CTmoog]

Hello! Thank you! Did you subscribe? Stay tuned for more!

[@AntenaGames]

@@CTmoog YES ME INSCREVI. ANCIENT FOR THE NEXT VIDEO. THANK YOU.

[@saberahmad5282]

I am Waiting 👍💕

[@robj2704]

Interesting way of making a low-profile jack. Cheaper than special construction of one with full-size casters.

[@CTmoog]

Hey Rob! Yes, it works pretty good! Thanks for watching! Did you subscribe? Stay tuned for more!

[@1848ification]

Good job

[@CTmoog]

THANK YOU!!! =) Stay tuned for more! Did you subscribe?

[@1848ification]

@@CTmoog I want to see the whole process. Yes i'm registered

[@EmanDeluxeVLOGS]

Looking good CT! Add to the list. The back... Or front on engine is missing the throttle ring. You can search for what it looks like and grab at next swap meet.

[@EmanDeluxeVLOGS]

Check out one of my older videos, it's called VW throttle ring in action.

[@CTmoog]

Thanks man! I will keep an eye out for one! I will check out that video tonight brother!!! =)

[@EmanDeluxeVLOGS]

It's more if you want heat I guess, works with the thermostat. just noticed it was missing. You're looking well man keto diets treating you right

[@CTmoog]

Thanks man! Yes, it really is a great diet. Check out Dr. Eric Berg on youtube! He is awesome! kzbin.infovideos

[@technicalzubairbhai907]

Now I'm like and subscribe and wait for this vane complete

[@CTmoog]

Thank you!

[@glauberhenriq]

i wanna see this on the streets! keep doing hard mannnn hahaha

[@glauberhenriq]

and rusty style is pretty awesome

[@CTmoog]

Hey Glauber! Thank you! Stay tuned!