1964 Impala SS Part 14 - Metal Work Finished !! Complete Floor - Quarter Panels - Complete Trunk

SHOP INFORMATION :
Contact us at : [e-mail]
Our Address is: Guzzi Fabrication
3206 Main St Suite 106
Rowlett Tx 75088
www.facebook.c...
Check out my other videos in our KZbin playlist page:
www.youtube.co...
Honesty - Quality - Craftsmanship
What We Do : Rust / Collision Repair
Metal Fabrication - Steel - Aluminum - Stainless
Complete Chassis / Aftermarket Chassis - Front & Rear Installation
Frame Fabrication / Straightening
Drive Train ( OEM / Custom )
Wiring
HVAC
Resto Mod
4X4
Street Rod
Hot Rod
Custom
Antique Car
Speed Shop
Over 20 Industry Certifications on Display:
Current AWS Welding Certs
I-Car Collision certifications
PPG Paint Certifications
OSHA - 10 Certification
NCS NESHAP Certification
EPA Compliance
Blacksmithing Certificate
Eastfield College

[@Flaco20x]

You Sir are an artist when it comes to sheet metal!!! Very fine work. The foundation to that 64 Impala is Impeccable. Wish I had the cash to have you do mine. But I know your work would not come cheap. But it really shouldn’t. You get what you pay for and you are worth the money.

[@guzzifabrication3448]

Thank you Sir !! Happy New Year !

[@josephcapps6416]

Really nice job. Impressively straight car at this point. The owner should be very happy. Thank you for taking us along.

[@guzzifabrication3448]

The Impala is really shaping up, thanks for the comment !!

[@miltoncostakis799]

Beautiful work! Looking forward to the 63!

[@guzzifabrication3448]

Thanks Milton ! disassembling the chassis today !

[@jdrodriguez5219]

Can’t wait to see some of the work on the convertible. As always I’m amazed.

[@guzzifabrication3448]

Thanks !

[@umittosun5209]

You are definitely a lineup. Fabulous work. I'm looking forward to your new videos. I wish you safe work.

[@guzzifabrication3448]

Thank you Sir and thanks for watching !

[@jonathanvidal3073]

Wow! I can't believe how straight the lines are with no filler. Great work man!!!

[@guzzifabrication3448]

Thanks for always supporting the channel, my goal is always very little body filler.

[@CONSERV1762]

Unbelievable work! Looks great.

[@guzzifabrication3448]

Thank you Sir !

[@johnkelly6942]

What a great feeling to know all the metal work is done. Really nice result!

[@guzzifabrication3448]

Yes Sir ! Thanks for watching.

[@markmccann5711]

Mate well done its great to see a tradesmen excell in their profession and take pride in their work ,you could easily be an 1st class aircraft sheet metal worker .

[@guzzifabrication3448]

Thanks ! yeah I would love working in the aircraft industry.

[@15farcry]

Your work is a thing of beauty!

[@guzzifabrication3448]

That's a very generous comment thank you I really appreciate it

[@jtorotoro6549]

Nice job ..😮

[@guzzifabrication3448]

Thank you !

[@junkyarddawgfixit8970]

Very, Very Nice.....You are the heavy hitter in this business, keep rolling........

[@guzzifabrication3448]

That's a generous compliment, thank you Sir !

[@zealandianorth7383]

Perfect straight lines. Beautiful work

[@guzzifabrication3448]

Thank you Sir !

[@MatsForsberg-i3b]

Nice jobb Mats from sweden

[@guzzifabrication3448]

Greeting from America !

[@thebull9212]

Brother, that 64 is coming along great!! Keep up the awesome work....

[@guzzifabrication3448]

Thanks brother !

[@denisedeon3336]

pure craftsmenship

[@guzzifabrication3448]

That's awesome, Thank you !!!

[@peterjimenez3795]

Man!! ....That's a great job 👍👍👍

[@guzzifabrication3448]

Thank you Sir !!

[@rudymartinez8206]

Beautiful work your one of a kind excellent craftsmanship

[@guzzifabrication3448]

Hey that's awesome thank you !

[@adammccall4769]

This is by the best comprehensive and correct body panel install and fabrication. Unbelievable job man!

[@guzzifabrication3448]

Thank you Sir !

[@samuelsmith2522]

Can't wait for the '63!

[@guzzifabrication3448]

In progress !

[@mrgreezy1]

Beautiful sir, I’ve never seen butt welding through e coat, I thought it was a standard to take down all your welding points to bare metal and apply welding primer with zinc before making welds.. I’m sure how you did This is fine. This car looks great. I wish it was mine. Lol.

[@guzzifabrication3448]

Thank you for watching !

[@ChristerJohansson-ic5be]

Impressive

[@guzzifabrication3448]

Thank you Sir !

[@rwendell0912]

Really nice work,car is going to look great !!!

[@guzzifabrication3448]

I think the owner will be happy, I'd like to own it, thanks for watching !

[@mattiefattie3895]

I just finished binging the entire series on this Impala (one of my favorite all time classic cars) and I hope you still read old comments from late watchers like me. I have only one silly question after watching the entire series. Your videography and voiceover improved throughout the series. I have one question and one comment. Question: do you prefer to work in an almost peacefully quiet shop? Or do you like to work to music but left it on mute due to copyiright worries? My one comment (ironically) is that I'm in no way an expert on what you do but I have been watching videos like this for a decade. They ALWAYS get ruined by commenters suggesting that "you're doing it wrong" just from inexperience or being armchair quarterbacks. I haven't been able to watch more of your recent content, my only comment is don't let the people questioning your work cause you to feel like you need to explain to them. And therefore turning your channel from a tutorial to you defending yourself constantly ie. whoever said you need the actual frame of the car to do this. Many of the comments by viewers are super positive and in awe of your craftsmanship. As soon as you start responding to the small percentage of people who think they know better, you give them power over the rest of us who just want to watch. Not against comments with valid questions like the brake lines, and you helping answer those, it's just the ones who have no questions rather nit picks.

[@guzzifabrication3448]

Thank you, somehow this comment was missed, I reply to all of the comments, good or bad comments drive the algorithm. Thank you for supporting my channel !

[@ST-cy6we]

In a shop that I worked in, when installing part of a quarter panel, the bodyman would flange the existing panel and then drill for plug welds on the new panel section. This allowed for a very flat joint and minimal filler. I wonder now, all these years later, if that was a strong as it could be. I like the way that you sectioned in that panel on the right side.

[@guzzifabrication3448]

Flanging is my least favorite way, you never get a perfectly flat 90 degree from any flanging tool.

[@TimLuevano-ir4fl]

Great video I wish I had your skills man!!!!

[@guzzifabrication3448]

Thanks !

[@WILODSM]

Awesome work 👌🏾👌🏾👌🏾

[@guzzifabrication3448]

Thank you Sir !

[@isaacwyant763]

So if you are only replacing a partial quarter panel do you splice it at a body line if possible and do you butt weld it or use a flange Do you have any videos of doing a partial quarter Great videos you do awesome metal work thanks for taking the time to record your work .

[@guzzifabrication3448]

Personally I never flange because it can cause alot of distortion, I',m going to splice the quarters on the 63 convertible ( quarters are not available ) probably butt weld. Thanks for watching !

[@tomwilkinson2184]

😊 Excellent work

[@guzzifabrication3448]

Thank you Sir !!

[@jackwitterstaetter1668]

Nice work a lot of people have no idea how much work is involved in a restor

[@guzzifabrication3448]

That is very true...

[@raulayon9224]

😃👍 verry nice work.

[@guzzifabrication3448]

Thank you !!!

[@rescuedandrestoredgarage]

Dear Lord, brother. Your work is incredible. I would love to spend a year in your shop and learn every day. I know your channel is big, but I still would like to give you a shout-out, if you are good with that.

[@guzzifabrication3448]

I'll take every shout out I can get !!! Thanks for your support.

[@rescuedandrestoredgarage]

@Guzzi Fabrication Sweet, I believe the video will drop on Sunday. We are trying to figure out how to tag people so it will pop up for you.

[@kentmccoid3687]

Love your work and attention to detail!! Did you video the rust repair to the roof section above the drip rail? Would love to see that as I have the same on my 64ss that needs to be done. Cheers.

[@guzzifabrication3448]

I haven't repaired that area yet, stay tuned !

[@CaliTeeGS460]

Man Bro you do great work!

[@guzzifabrication3448]

Thanks !

[@CaliTeeGS460]

How can I get a quote from you for my 64 SS metal work? I'm located in Southern California. Thanks

[@SS-fc3bq]

Fantastic 😍

[@guzzifabrication3448]

Thanks 🤗

[@ImpalaLans]

What about installing the Impala lettering punch outs in the left side quarter panel?

[@guzzifabrication3448]

That's an upcoming video. Thanks for watching !

[@benclarke6177]

Wow!! Congrats on an amazing build/series! Ball-park - how many hours went into this from a metal-work perspective?

[@guzzifabrication3448]

Thanks ! let me add that up.

[@peter99564]

beautiful work on getting this to where it is in this video, What would the labor guesstimate be on doing another 64 sdr needing the same amount of work? would labor be in the 25k or higher mark?

[@guzzifabrication3448]

@peter99564 Thank you Peter ! We tailor every estimate to each project.

[@markwhatley9754]

What type of special air chisel do you use in all your videos

[@guzzifabrication3448]

A long barrel ingersol rand air chisel

[@bigernmckrackin6364]

Beautiful work sir! I myself have a 63 and 64 impalas, is there a specific brand of sheet metal you would recommend? Or stay away from?

[@guzzifabrication3448]

The one to definitely stay away from is "genuine GM parts" I have a video on that : kzbin.info/www/bejne/fH_IdnR6hJqLa5I other than that, quality across the board on all parts is not what it was a couple of years ago....

[@MarkCraft-b5m]

Where are you located? I have a 64 impala SS supersport. Needs all the same stuff done.

[@guzzifabrication3448]

I'm in Rowlett Tx

[@TMAN5TEEZ]

This is awesome 👌🏽, Happy Easter to you mate , also how did you stamp the holes for the SS side trims on the quarter panels and doors?

[@guzzifabrication3448]

I havent gotten to that stage , the Impala needs to be back on the frame and the fenders install. Thanks for following the channel !

[@latonispraggs3429]

Guzzi, I have a question: What's a good welder to start doing panels and floors for beginners DIY. Folks?

[@guzzifabrication3448]

Miller 211 w/auto set and shielding gas or Lincoln 140 W/shielding gas.

[@mikedoty5352]

Where is part 13 video?

[@guzzifabrication3448]

Did you look in the 1964 Impala playlist?

[@mikedoty5352]

@@guzzifabrication3448 not sure how to do that.

[@guzzifabrication3448]

Should be a category under the video or the description that says playlist click on that kick the playlist you want example 1964 Impala all of the Impala videos are in that playlist

[@CK-mt7om]

My best guess is parts alone without the shop , shop supplies, man hour costs is around 15k

[@thekingmtmt3873]

I have to ask and I know and understand every car is different but in general whats a price range in doing a car like this? Not a show car just a regular driver. Just like a general price range. I ask because I really want take my 63 to get done. I just want to know how much money do I need to get my hands on. Like I said nothing crazy just a regular I guess restoration. Any suggestion would help. Thanks in advance

[@guzzifabrication3448]

I am creating a video on that soon. Thanks for watching !

[@thekingmtmt3873]

@@guzzifabrication3448 ok cool. Thanks for the reply

[@eikodunn]

👍🏾👍🏾👍🏾👍🏾👍🏾

[@guzzifabrication3448]

Thanks !!

[@36Hooters]

Will u be working on the 40 series.

[@guzzifabrication3448]

Yes !

[@36Hooters]

@@guzzifabrication3448 will be great to see a resto of a cruiser with your quality of work. 🇦🇺

[@thomasquintana4619]

How can I link up with you

[@Reginaldevans000]

How much a job like that cost

[@guzzifabrication3448]

It depends on the vehicle. Thanks !

[@CK-mt7om]

If you have to ask, probably forget about it. 😂😂😂