1965 Impala gets a full Ridetech Modular Suspension Upgrade

[@alexandrekachler8678]

Great video, thanks for sharing the installation of this amazing kit. This Ridetech kit for our 65 looks really amazing, unfortunately too expensive.

[@FamilysGarage]

Nick, Love seeing this car back on the channel!!!!

[@mannyvaldez9741]

Thoroughly enjoyed this install!

[@ClassicNation]

Thank you!

[@rickturntosender892]

Love your videos Guys and for always sharing your knowledge on IG

[@ClassicNation]

Thanks so much! I'm glad you're enjoying the content!

[@dmichaelwoods]

Would love to know tire and wheel specs. This fitment is perfect!!

[@arlenewolf5260]

I have a 1970. I think UMI also makes a great rear suspension set.

[@SurlyMike]

I have a 66 and was looking at the QA1 kit, first thing I noticed was the rear coil over mounts. I did not like that either. You didn't go into the sway bar install much. Thanks for sharing!

[@johndavey72]

Great content Nick . Over the pond we call those "r" joints "rose joints" . The're commonly fitted on race prepared cars . I believe they tend to transmit a harsher ride than the standard set up . But as you've commented the new system is custom made and the difference in handling must be very noticeable and enhanced . I guess the shockabsorbers are adjustable so may take a while to set up. And the gearbox must enhance and capture the engine performance that compliments the suspension mods ........the perfect sleeper ! Thanks Nick

[@ClassicNation]

Thanks John! As always, we appreciate the continued feedback and support!

[@TheRussFromOz]

Great video mate. Would love to get the Ridetech kit for my '67 one day. Your car is looking great. Enjoy the ride!

[@ClassicNation]

Thank you! We appreciate the support!

[@garageflip75]

Hello Nick. Great how to video and beautiful car. What are the wheels sizes and tire sizes you put on your 65? The stance and wheels are perfect. Love it!!!

[@cy7571]

Great video, Looks awesome! Considering this kit for my 66 Caprice. Can’t decide between this or the air ride kit.

[@ricardopadilla7682]

Just got this kit installed in my 65 and the ride height is a little high. Is it fairly easy to make adjustments by lowering the adjuster nut or is this best left to pros in the shop?

[@alc279]

Looks like your running drop spindle. How is the drop spindle/coil over combo working out. Thinking of doing same.

[@ClassicNation]

Nope, I had drooped spindles from my pervious setup, but when switching to this Ridetech setup, I switched back to original height spindles. Works perfect and still has the nice low stance I was after with the coil-overs. Hope that helps!

[@HotRodseventy7]

Incredible, Nick! Your videos have inspired me many times to get out working at my own 65 build. I have much of the same restomod plan as you, are you still happy with the headers and exhaust you have? Cheers!

[@ClassicNation]

Thanks so much! Glad these videos are helpful! Yes, still loving the header and exhaust setup! Thanks for the support! Cheers!

[@savage5417]

Hey friend where can I buy this nice suspension for my 65 impala I love the ride

[@rossphelps4666]

Tire and wheel specs?

[@luisgardea2629]

Hey man! Considering QA1 or ridetech suspension! Any updated comments about your suspension system since you've been driving around more.

[@82Ismael]

Same

[@hectorraigosa7149]

Its been a year.. what do you think of it so far? How does it handle? Stiff or ? Im trying to decide if i should go coil over or air suspension..

[@arcadiosolorio7231]

Quick question for the front muscle bar did you drill new holes for the mount or did you use the factory holes?

[@Lsguy74]

how much does this adjust - can you get really low?

[@rossphelps4666]

What was the total cost of materials? Thinking of doing this on my '65 SS.

[@SuperEasy2009]

How much did this set up cost?

[@michaelangelo7132]

What tach did you use for your indash application?

[@stephenb4164]

I was thinking QA1...until now! I am only going with coil overs and not the full kit.

[@matthauck2544]

Did you go with HQ or the TQ coil overs?

[@edwardroe1268]

you have a 4 speed center console on your bench. I have 1966 Impala and looking for a console. can you tell me where I can find it thanks

[@Panthercholo]

Do you guys offer bigger shirts?

[@hood2hoodrec]

Can I get the website does it work for a 66 impala?

[@arlenewolf5260]

Great Video. Where are you, I am in E. Tn.

[@ClassicNation]

Spokane, WA!

[@arlenewolf5260]

@@ClassicNation Too bad, I would like to see your car at the local Cruise Nights