I gotta say I really like watching Dave, I’m very surprised he’s not more well known. He’s a Great teacher. I’m a 20 year tech and I still learn from him. This is Great stuff.
@PKhanz2 жыл бұрын
I 100% agree. Slight correction, his name is Davin. Have a great day!
@williamwright69782 жыл бұрын
Davin is like most of who do this kind of work; not flashy or fancy, just getting the job done. Thanks Hagerty for introducing us!
@tomrogers94674 ай бұрын
I got my driver’s license in a ‘65 Bel Aire with a 283. Great engine. It was still purring after 100K mikes when the body left the Rusty Fisher Chat.
@scottimusgarrett152 жыл бұрын
Thanks, Davin! Always a pleasure to watch someone work who has such attention to detail! And, as usual, thanks to the crew for the time-lapses and great camera work!
@jwszewczyk2 жыл бұрын
I will and also recommend measuring and verifying everything whether it's a racecar or farm tractor. If it's worth doing it's worth doing correctly.
@monkeybarmonkeyman2 жыл бұрын
Considering the cost of doing it wrong these days, everything needs checked and verified!
@jotighe22 жыл бұрын
agreed.less is more. spend a little more time now to spend a lot less in the end.
@InuranusBrokoff2 жыл бұрын
Love the 283.
@r1learner1782 жыл бұрын
Really like the finish you have on the outside of the motor. You are very thorough when building a motor which is a good thing.
@jeffjankiewicz51002 жыл бұрын
Looking at those aftermarket timing gear sets and the differences, quality control and tolerances has left the building, but the OEM just slides right in. Always a learning experience with Davin. Thank you Sir.
@r1learner1782 жыл бұрын
You never know, they might have put the wrong one in the box (it happens) as they sell shorter chains drive sets for blocks that have been align bored and honed usually in .005” and .010” undersize. Or maybe a communication breakdown with the person taking the order.
@travdripdrip3822 жыл бұрын
This guy knows his stuff. I look forward to his videos every week
@jotighe22 жыл бұрын
I will also add, of all the wrenchers on KZbin and other, I rather watch Davin than any of 'em. Something about his approach, understanding, and process (plus his choices of projects and platforms), makes me feel like when I was first in a garage looking at an engine, and that discovery and learning. his personality speaks to all levels at the same time. Plus, I had that exact 283 in my 66 Chevy II, with a 2-speed trans and a 4.11 rearend. it was even the same color. Keep on wrenching, Davin, I'll follow you wherever you pop up! always a fan. redline and haggerty seem like a good fit, and now they each have another fan thanks to you.
@zachyoung46512 жыл бұрын
Absolutely a beautiful specimen of a SBC. Always loved the 283’s first engine I ever overhauled. $75 to rering and replace the bearings. Many moons ago, nice work keep it up.
@jotighe22 жыл бұрын
I had that exact 283 in my 66 Chevy II, with a 2-speed trans and a 4.11 rearend. it was even the same color.
@robertparker31722 жыл бұрын
I watched with great envy the reinstallation of the oil pan and gasket. The last one I did was on my back under the car in a cold, poorly lit garage.
@markbremmer86422 жыл бұрын
If you noticed, he used the original cordless tool, the speed wrench.
@alexyo39272 жыл бұрын
The time and effort you put in to this motor is great. You'll have a strong solid build ignore others, you've done an amazing job done right
@gettcouped2 жыл бұрын
It’s a very vocal minority of people who reply negatively about your methodology. Most of us are here to learn and see something done the right way.
@daveryan4353 Жыл бұрын
Man Davin I'm Proud Of You Son You Are A Mechanics, Mechanic !!! A True Gear Head And A Artiest!!! That is By Far One Of The Most Beautiful 283ci. Chevy Builds That I've Seen In A Long While Makes Me Want To Build One Like It!!! Great Job Davin and Keep Dooing Them Like You Do I Have No Complaints. Your Fan And A fellow Mechanic and Veteran Sfc. David.L.Ryan 7th SF.GRP Airborne Ret.
@howardscott75212 жыл бұрын
Trying to buy an aftermarket part worth bringing home is getting to be quite a challenge. Junk galore out there.
@JeroenvdWal2 жыл бұрын
Hi, i usualy dont place comments, im just one of the many viewers. My opinion is, i don't agree with the "stock build doesnt need this" comments. I agree with all the steps you take on building engines. All i want to say is, Dont let those few get to you.
@joeishere5002 жыл бұрын
THANKFULLY YOU KNOW WHAT YOUR DOIN...
@adamss68er2 жыл бұрын
Great Video !!!! Love All Your Videos But This One Was Dope !!!! Great Music Selection Also !!!!! 💯💯💯💯
@cdstoc2 жыл бұрын
Nice to know that adjusting the lash on Chevy hydraulic lifters hasn't changed since the 1960's when I used to help my dad work on cars.
@jamesmisener30062 жыл бұрын
David's engines will last for a long time and run smooth while doing it. I'd like to have one. Cheers 🇨🇦
@allysonhanks91592 жыл бұрын
hello James how are you doing 😊
@doctorromex78042 жыл бұрын
Lookin good as usual. I don't know about using those pressed in rocker studs with that beautiful hyd roller valvetrain. I realize it's not a solid roller with hundreds of pounds of spring pressure but from past experience I can say I've seen a lot of them back out over time with 500 ish lift flat tapper hyd cams and 100ish pound springs. SB Fords are worse than Chevy because they use a looser tolerance interference fit than GM. There's nothing wrong with leaving the stock studs in at your level but I would have at least drilled and roll pinned them to keep them in place. It's old school but it works. BTW, the hi performance Chevy 409s had pressed studs pinned from the factory.
@brucebello20492 жыл бұрын
Great video Davin, thank you, I must admit I enjoy all your videos!
@monkeybarmonkeyman2 жыл бұрын
So I'll say the way you checked clearance is great provided every valve seat is located in the head at the same depth. But having watched your videos for a couple years, I know you already checked the seats when the heads came back from the outside shop.
@ldnwholesale85522 жыл бұрын
Convert it too screw on filter. Those cartridges eat oil pressure. I learnt that decades ago, 25lb with cartridge, 35lb with screw on. And yes it was an AC cartridge. Plus resolve potential leaks. Pre 69 engines had 35 psi, update was 45-55 psi I doubt you can buy an early pump or parts so the 350 pump is what you will use. 20psi extra is a leak!! As for cam timing?? Different chains, different gear and different cams sets will move cam timing 10 degrees so they must all be checked. I have a Ford cam here that is 20 degrees out!
@paulstan98282 жыл бұрын
I wish I had your knowledge. Thanks sharing it.
@frankr67022 жыл бұрын
Re: timing chain set variance: Well said
@ChrisMcCutcheon-wj2pp9 ай бұрын
Grumpy used those nylon top gears with tight valve clearances,
@TheCapitalVice2 жыл бұрын
Why people dont want to just take a few extra hours and measurements is beyond me. It will only equate to a smoother running engine that has stronger durability in the end. More miles = more smiles!
@Hagerty2 жыл бұрын
Well said!
@Classickoolcars6 ай бұрын
100%. 👍
@ronnieboucherthecrystalcraftsm2 жыл бұрын
i would have = screw in rocker studs = for peace of mind !
@rajrammbbs2 жыл бұрын
Love that glyptal.
@Hagerty2 жыл бұрын
Us too!
@vettekid33262 жыл бұрын
Checking the valve clearance is critical if you have changed the compression ratio by using pop up pistons and or milled the block deck height. Of course if you've installed a high lift cam valve clearance comes into play as well. Also if you are installing a stroker crank it's best to check the clearance as well . There are those that want to nerd out and calculate from the measured height of the valve reliefs in the piston top to the top of the machined deck at top dead center and add the thickness of the head gasket along with the total cam lift to the valve face for the theoretical clearance.
@wojtekdobrowolski80842 жыл бұрын
Jeez now that I think about it Davin looks like James "Sonny" Crockett from Miami Vice
@IOwnCalculus2 жыл бұрын
I'm not the least bit surprised at the lack of quality in timing sets. I ended up having to go through three different sets when doing a new chain on my Jeep 4.0 because the tolerances were so poor just on the fitment of the gears to the cam and crank. I didn't even bother degreeing it because it was just a timing chain job on a 180k+ motor, but I'd expect that my cam timing changed a decent bit as well.
@RG2022-a2 жыл бұрын
My dad did a tear down of a customers boat engine years ago that had adjustable pushrods in it. Whoever put it together thought they were supposed to be used as the actual pushrod.
@SootHead2 жыл бұрын
Timing words to live by! I was once a tech for a major manufacturer and did a little test of the factory chain & gear sets over the course of a year when we had a lot of coolant leaks around front covers. Timing was all over the place and therein lies the one of the possible reasons why two otherwise identical new engines can perform so differently. Engine A runs like a gazelle and the other can't tear wet toilet paper. Checked cam timing on a bunch and could correlate the one that ran good to the actual cam timing spec. And vice versa. I still see those appalling white wheels on the Chevy truck! For shame!
@allysonhanks91592 жыл бұрын
hello Jim how are you doing 😊
@maryterrill54852 жыл бұрын
A very good video...
@mtdualie10392 жыл бұрын
Ouch, I feel that. I'd much rather it last
@samuelscott13612 жыл бұрын
Did we cover compression ratio for this engine, or did I miss it ?
@allysonhanks91592 жыл бұрын
hello Sam how are you doing 😊
@kyleforeman45432 жыл бұрын
Ck,ck,ck,ck, very informative again Davin, who would of thought that much different between different brands od trimming gears..allmost ready for Zoom,Zoom
@nateb82452 жыл бұрын
Enjoying the build and learning lots along the way. Unless I missed something, I didn’t hear what timing set ended up working. Several didn’t. The stock one was close to perfect but you weren’t going to re-use it. What did you end up using for the timing set?
@Axr24have2 жыл бұрын
Thanks Davin. Question; what would you do if the valve clearance was too tight? I ask this question as soon as I saw you measure the putty, so I apologize if you mentioned the answer at the end of the vid. 👍
@Fr0stbyte892 жыл бұрын
You have a few options - none of them are super fun. Could try a thicker head gasket, but this will also lower your compression somewhat. Otherwise you either need to get additional clearance cut into your pistons, order different pistons with larger valve reliefs, or reduce your lift with a smaller cam or lower ratio rockers.
@Axr24have2 жыл бұрын
@@Fr0stbyte89 thanks my friend!
@allysonhanks91592 жыл бұрын
hello John how are you doing 😊
@donaldhill2775 Жыл бұрын
Nice clean built, I favour flat tappet cams with solid lifters, not much to go wrong there, forget the mad run in procedures and lock the clearances in, poly locks etc, they shouldn’t need adjustment every 10 minutes more like once a year on a low mileage classic, re-occurring theme is increasing RPM capability and shoving power up the rev range, max possible top end hp on your dyno ticket, no one cares ! on a road engine build for torque not rpm, save your money trying to control 8000 rpm and spend it on loosing weight and brakes, get in front and out brake the competition 👍
@dvjracing5947 Жыл бұрын
Chilton book says 3/4 turn past 0 lash.....
@derekclaydon9002 жыл бұрын
What was the country of origin on the less than ideal parts??
@electricguysvcs2 жыл бұрын
What did you do for the old draft tube location? I have a 67 - 327
@AmraphelofShinar2 жыл бұрын
So... what timing gears are in the engine? I'm confused. You showed what didn't work and what you didn't like but... ???
@ellandroide56432 жыл бұрын
Nice
@bluejayfabrications22162 жыл бұрын
Can I ask what happened to snowballs race car I was looking forward to more of that one
@parklaneent44942 жыл бұрын
A quick question. Does the manifold on the 1964 impala 283 (twin barrel) fit the edelbrok 1406 600cfm carb? Or should the manifold be changed too? New to this🤦🏻♂️
@boydoesititch2 жыл бұрын
No, you would need to swap out the manifold for a dedicated 4 barrel pattern.
@lordsauto10 ай бұрын
Too tight? what is too tight? I did just install one and its pretty tight. no movement at all, but wont over time loosen?
@timothydeyoung56532 жыл бұрын
Are you saying people should buy four different timing chains assemblies and see which one fits. Can you recommend one for your specific application?
@victoroneill79242 жыл бұрын
I always find true TDC using a degree wheel even on a stock engine. The are too many things that can be slightly off.
@michaelsymons9098 Жыл бұрын
hi what pistons u running
@norherman2 жыл бұрын
How come you didn't use a set of timing gears, I think by Jackson.
@sadlerbw92 жыл бұрын
A question about that second timing gear set: It looked like it had three positions for the keyway that were about 120 degrees apart. Could you have broached in another keyway at the position you needed, or would it have been too close to one of the existing keyways? I know it isn't an option for everyone, but you do have more tools in that shop than the average joe!
@Hagerty2 жыл бұрын
I have no doubt that in an absolute pinch with no other options available, that Davin would be able to accomplish that. Thankfully we didn't have to resort to such tactics!
@michaeldavis34302 жыл бұрын
What assembly lube are you using here?
@davidmarshall86282 жыл бұрын
Pressed in studs with a roller cam?
@offsideundo2 жыл бұрын
This is how much I don't know about American V-8 engines; what lubricates the connection that holds the two tappets together. It looks like there is a LOT of mechanical movement where that bar connects each of the paired tappets together. Is there oil spray in that gallery between the cylinders?
@Fleetwrench2 жыл бұрын
The linkage is a roller lifter conversion. For older flat tappet blocks. Plenty of of oil from drainback and splash.
@kenbarnes89582 жыл бұрын
PLEASE HELP ME OUT HERE. In 1969 I had a Corvette with a 301 engine with a 30/30 cam. (does that tell you how old I am?) I seem to remember that it would turn 9000 RPM. Am I just a senile old man or not? Smokey Yunick claimed 12,000 RPM for his 302 Chevy''s. Of course I'm no Smokey Yunick but he had been known to stretch the truth but 9000 seems hard to believe now. Is it possible?
@JimPeachley2 жыл бұрын
After using on the block, is there a reason for not painting the lifter areas with Glyptal?
@bobbrownlow64092 жыл бұрын
From wrong auto ?
@asimplehorseman46482 жыл бұрын
Well at least you didn't tease us with Snowball's car in the background. Is he dead yet? Who's the snow flake holding up the project? See what I did there? "snow ball", "snow flake"(LOL) C'mon fella's, get it running!!
@rustlebruxz00132 жыл бұрын
Why are the lifter pairs strapped together? I'm surprised it doesn't restrict their movement.
@keenankircher74922 жыл бұрын
They are strapped together to stop them from rotating in their bores because this is a roller camshaft setup
@Hagerty2 жыл бұрын
What Mr. Kircher said! If they rotate, very bad things happen!
@ianatkinson84642 жыл бұрын
😎👍
@dougjones94932 жыл бұрын
Show me the Clearance, Clarence.🤪
@pablotwg322 жыл бұрын
Question: Valve clearance was measured after using two different length pushrods (unless I missed it), wouldn't this affect the measurement? Great video as always, keep em coming!
@paulketchupwitheverything7672 жыл бұрын
I think Davin covered this at 8:50 when talking about the difference between solid and hydraulic lifters. The difference in the pushrod length was just to check the contact area on the end of the valve (5:20) and there would have been no clearance on either due to the hydraulic lifters.
@Fr0stbyte892 жыл бұрын
Yes, it would affect it, but the length difference was very small and he had so much clearance that it doesn't matter in this case.
@GoogleXXXXX2 жыл бұрын
🇺🇸👋😎❤️🇸🇦😎👍
@larryfernow40712 жыл бұрын
Which head gasket did you use?
@sahruldominick10812 жыл бұрын
Please subtitle indonesia
@TheForthElement2 жыл бұрын
Question for the timing Davin, I understand your point of checking it, and I'm not trying to say that its fine to not check the timing on initial setup, but I've built a Rover V8 and I got another one on the go. With all standard parts, there is no adjustment for timing at all. The workshop manual if you follow it, doesn't even mention checking it. Of course, its not a high performance engine, but with all genuine parts, the timing should surely come close, right? How would you suggest to make timing adjustments on a system that doesn't have any adjustment? I didn't check it on initial setup (my friend said its probably worth checking, but I didn't because there's no adjustment and at the time, I wanted to get it back in my Disco ASAP), but on this next engine I will be. That engine I built has just clicked 15,000km. Love the content!
@r1learner1782 жыл бұрын
To make standard Chevs adjustable you could drill the dowel hole out and use offset bushes. Standard parts are usually pretty good (within an allowable tolerance) but if you want to be able to adjust it you usually need to go aftermarket. Most standard parts don't allow for adjustment because they wouldn't allow time for that sort of thing when installing the parts on the production line - unless you are buying an Aston Martin or something like that where the engine builder puts his name on the rocker cover. Rollmaster do a Rover V8 timing chain set with a 9-keyway crank gear - depends what sort of Rover V8 you have.
@hotrodswoodshed74059 ай бұрын
I completely disagree with the pushrod length method. In truth finding ACTUAL rocker geometry is SOOOO MUCH MORE than simply placing roller tips in the center of valve tips. But it seems to be rare to find accurate instructions.
@futten32302 жыл бұрын
no such thing as "Not needed on a stock build" when making things right on the measurements and tighnesses so the engine dosent destroy itself from bad assembly
@andrejeis55602 жыл бұрын
Когда дыму дадите?)
@markk36522 жыл бұрын
I have to say, the meticulous steps performed on the engines that are rebuilt on this channel always pay off in the end. No one wants to go through the work involved to have a shortcut or an oversight to unravel hours of work.