1966 Hood, Fenders, & Headlights Install - VW Beetle

We are now an Independent AMSOIL Dealer for all of your Lubrication, Filter and Fuel Additive Needs, plus so much more. Check it out! www.hirevzgarag...
Headlights - amzn.to/2GLjxnc
Alright guys, in this video, we installed the '66 Hood, Fenders, and Headlights onto our Standard Beetle. It's Looks So Good Like This! Have a Blessed Day and Stay Tuned!
Guys are asking what’s all been done to it.
Here’s the list:
4 Speed Hurst Shifter
4 Wheel Disc Brakes
Built Engine
Larger Pistons and Jugs
Large Cam
Dual 34mm Solex Carbs
EMPI Performance Exhaust Header
EMPI Phat Boy Muffler
Add-on EMPI Oil Sump
Claude’s Buggies Breather
009 Distributor
All Aluminum Steering Wheel
Aftermarket NOS Italian Fenders
EMPI Bubble Headlights - amzn.to/2GLjxnc
1966 Hood
1966 Deck Lid w/ EMPI Stand Offs
Wood "Knock Down" Roof Rack - amzn.to/31TlN39
2.5" Lowering Spindles - amzn.to/3dGZLW9
EMPI Trialing Arm Thru Rods - amzn.to/2GuFtSZ
Rear Spring Plates Up Two Notches
Monroe Air Spring Shocks Front - amzn.to/3l5PMMm
Monroe Air Spring Shocks Rear - amzn.to/36mOf0j
AIR LIFT 25804 Air Shock Controller Kit - amzn.to/3nybtaa
New Steering Box
New Ball Joints
New Tie Rod Ends
5.5” Chrome Wheels
125R15 TIRES - amzn.to/3DWwDFL
Other Air Suspension Parts
1/8 NPT Fittings - amzn.to/36EUnkW
1/4 NPT Fittings - amzn.to/2SySQV3
1/4 NPT Tire Valves - amzn.to/34tiyjA
1/8 Pneumatic Toggle Switch - amzn.to/36CNAIn
1977 Volkswagen Beetle Standard
CERAMIC COATING!!!
Use Code "HIREVZ25" for $25 OFF at avalonking.com...
The $25 off applies to any order and combines with the built-in website discounts.
Check out HiRevz Garage - HiRevz Clothing Co. at www.hirevzgarag..., / hirevzclothing , / hirevz #hirevzgarage #hirevz #hirevzclothing #hirevzmedia
Please Like and Subscribe!
Subscribe Here: goo.gl/Qng0r6
Get $5 off your First purchase on the Amazon App. Here's the code: JORDA17810N
My Main Camera - amzn.to/2WOELmj
My Second Camera - amzn.to/2ogsr0i
Help With Camera - amzn.to/2oJgoKg
Lens - amzn.to/2RlEINE
Lens I Love - amzn.to/2oJ3xaH
Other Lens I Love - amzn.to/2Ims7a7
My Old, but Good Lens - amzn.to/2oQKwQE
Battery Grip amzn.to/2p9FWfp
My Drone - amzn.to/2oMrm1a
Drone Backpack - amzn.to/2oQNhBe
Carbon Fiber 3 Blade Props - amzn.to/2oJ8fp8
DSLR Stabilizer - SIC Visuals Ghost Gimbal
iPhone Stabilizer - amzn.to/2oMClaK
iPhone 6s 4K Video - amzn.to/2XrpT1G
iPhone XR 4K Video - amzn.to/2INyMJx
SEND STUFF TO:
Jordan Reece
3001 Athens Hwy.
Gainesville, GA 30506
DISCLAIMER: HiRevz Media is a participant in the Amazon Services LLC Associates Program and other Affiliate Programs, an affiliate advertising program is designed to provide a means for sites to earn advertising fees by advertising and linking to the company's website.
"Due to factors beyond the control of HiRevz, it cannot guarantee against unauthorized modifications of this information, or improper use of this information. HiRevz Media assumes no liability for any property or personal damage that may arise from doing a repair on your vehicle after watching any of our videos. Due to factors beyond the control of HiRevz Media, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Again, any injury, damage or loss that may result from improper use of tools, equipment, or the information contained in this video or any of our videos is the sole responsibility of the user and not HiRevz Media."

[@darylredmond9312]

Looks so much better, great video,,,, hi from Australia 👍

[@DubsNStangs]

I'm doing this on my 71 currently. I found a set of fenders but they are just the fenders at the moment. What's the best way to complete them with lights and blinkers? I'm not sure what all I'll need. Also did you have any issues leaving the late front apron when you put that early hood on?

[@vwhallucination2647]

Wow dude that’s awesome I didn’t know the early fenders fit on the later standards beetle

[@mariocasanova5856]

escucho que es año 1966 son esas salpicaderas... 😉👌🏻

[@NeldaTolina]

Beside the small "grill mesh" under the headlights and the opening for the front bumper is located at the fenders and not the front apron. Are the fenders from 67 and 68-70 the same? Cheers!

[@tolinanelda2448]

Hi, Can add the 67 Front Fender on a 66 or earlier year without mods? About your project does the hood close well since it's longer? Cheers

[@mariocasanova5856]

Carlitos tiene los faros Nota ... no hay prisa tienes toda la herramienta dados el gato de patín .dados etc.... el tiempo compártelo primero tus hijas 😲😃👍🙆‍♂️ son más importante solo medita concéntrate. 😃😃😃☺️

[@tolinanelda2448]

Hi. You didn't have to change the front apron? If that's the case you can install a front fender and front hood from a 67 right? Cheers

[@HiRevzMedia]

You can install pretty much and year fenders and/or hood on any standard Beetle with minimal issues. Without changing the front apron, the hood will not latch. If you want it to latch, then the appropriate front apron would need to be installed. However, in a later video, I just made custom leather straps for it.

[@tolinanelda2448]

@@HiRevzMedia Thanks for the reply. New subscriber ✅. Since you beetle has the later rear light. If I would change the rear fenders and add snowflake rear lights would there be any issue with wiring the rear lights? Cheers!

[@HiRevzMedia]

@@tolinanelda2448 I was originally planning on changing the rear fenders and lights also. The wiring would probably be a little different, but shouldn’t be too hard to figure out with a test light.

[@bubot17]

nice going

[@HiRevzMedia]

Thanks

[@julioyon4849]

Can i do this in a super beetle 1971?

[@cyprianskiba8768]

Love the hub caps on the wheels, wish they would work on a 5x205

[@aeciodassis9616]

Hello I live in MASS, right now I'm in Brasil on vocation and this weekI did exactly the same thing. my VW beetle is 1970 but with the same head light like you have before I just change too and look much better awesome, I did change the back window for fiber split window, come out very nice too.

[@Vpfree19]

ola, nao foi necessário fazer nenhuma alteração? os guarda-lamas couberam , foi so substituir? obrigado!

[@robertdavis2013]

Do the big headlight supposed to have glass cover

[@bigdogsgarage]

What do you plan on doing with the back lights

[@avomarkarian6187]

Does he have a website or a page part person

[@vdubluv222]

I just picked up a 68 vert and was thinking about doing the early fenders... I didn't think the hood would latch to the late style front apron. are you just setting it down or does it actually latch? i guess the latch really doesn't work on my other bugs anyway. LOL

[@HiRevzMedia]

The apron style is the same, but the latch will definitely not work. I had it bungeed down in this video. In the next couple videos, you will see I did custom leather straps, like an old Porsche.

[@garytate8284]

Nice stance. I would do the same.

[@josecncpcn]

Beautiful

[@blakeerdmann]

Can you do a video showing the front beam. I love the stance!

[@HiRevzMedia]

Thanks, here is the full build! kzbin.info/aero/PLBYMVKy1lCTd2mRHx9D_GVXYG7T-MPXhV

[@edwardmcmillenjr8443]

A set of older rear fenders with small snowflake tail lights would look cool too..great video...a convertible bug with those old school fenders front and rear would look good too...

[@HiRevzMedia]

Yea, we’ve got one rear fender already and both taillights, just got to find another rear fender.

[@nosajselrauq9438]

There was no installation of the hood fenders and headlights I saw the after 🤔

[@HiRevzMedia]

Yea, not a “how to” video, more if a car progress vlog.

[@DubsNStangs]

I was also curious on where you ran that blue wire from, the late style just has the headlight wires right?

[@VWRICH23]

Looks perfect.. Does the hood latch properly?

[@HiRevzMedia]

No, the latch is not in the same position. I’ve got an idea though. That video will be coming out soon.

[@BoWhiteRacing]

Looks good.

[@HiRevzMedia]

Thanks bud

[@ekimp252]

Wow that looks great!

[@HiRevzMedia]

Thank you

[@stevegearlds7227]

You did have to change the front apron to change to the 66 fenders correct? If not how did you fit the longer style hood?

[@stevegearlds7227]

Sorry I meant you had to change the front apron to accept the 66 hood correct? I know the fenders will directly bolt up but didn’t think the 66 and earlier hood could be added without changing the front apron.

[@HiRevzMedia]

No I did not. The style of the front Apron didn’t change for many years, but the hood latch did. So the hood will still close and look correct, but will not latch.

[@stevegearlds7227]

@@HiRevzMedia just ran across your other video for it. Thanks for the info brother🤙🏼

[@aeciodassis9616]

the hood is different size by the step tire is narrow