No video

1974 Briggs & Stratton 3HP Motor Restoration [Part 1 of 2]

  Рет қаралды 114,573

AJ Restorations

AJ Restorations

Күн бұрын

Hit the Join button for Channel perks like early video access, shoutouts, and priority comment replies.
/ @ajrestoration A while ago I found two of these motors at my local recycling yard.I brought them home and thought they would make great restoration videos for you guys. This one I will keep its original white color, the other motor I will restore at a later time and it will be made black.
This motor was made in 1974 according to its serial number and has a 6 to 1 reduction gearbox. I suspect this was on a lawnmower or maybe some kind of equipment (duh)
I hope you enjoy the video.
If you have any suggestions for improvement, or compliments share them below!
Please leave a like if you did like the video, please subscribe and feel free to comment your thoughts and as always thank you for watching.
Link for becoming a channel member. (less than 2 dollars)
/ @ajrestoration
Some history on the Briggs & Stratton company.
Launched in 1908 in Milwaukee, Wisconsin, the company is based today in Wauwatosa, Wisconsin. Briggs & Stratton engines are commonly used on lawnmowers, as well as pressure washers, electrical generators, go-karts, and a wide variety of other applications. Their original cast-iron engines were known for their durability, but the company's success was established following the development of lightweight aluminum engines in 1953. The aluminum engine was the perfect solution for the recently invented rotary lawnmower due to its lighter weight and lower cost.
The company started in 1908 as an informal partnership between Stephen Foster Briggs and Harold M. Stratton. S.F. Briggs was born in Watertown, South Dakota, and graduated from South Dakota State College ((SDSC) now South Dakota State University) in Brookings in 1907. The idea for his first product came from an upper-level engineering class project at SDSC. This first product was a six-cylinder, two-cycle engine, which Stephen Foster Briggs developed during his engineering courses at South Dakota State. After his graduation, he was eager to produce his engine and enter the rapidly expanding automobile industry. Bill Juneau, a coach at South Dakota State, knew of Briggs' ambition and the entrepreneurial interests of Harold M. Stratton, a successful grain merchant who had a farm next to Juneau's farm, so he introduced the two. In 1922, their fledgling company set a record in the automotive industry, selling the Briggs & Stratton Flyer (the "Red Bug") at record low prices of US$125-$150.
Eventually, Briggs and Stratton settled on manufacturing automotive components and small gasoline engines. Briggs purchased an engine patent from A.O. Smith Company and began powering early washing machines and reel mowers as well as many other types of equipment. The company went public on the New York Stock Exchange in 1928.
During World War II, Briggs & Stratton produced generators for the war effort. Some pre-war engines were made with aluminum, which helped the company develop its expertise in using this material. This development, along with the post-war growth of 1950s suburbs (and lawns), helped secure Briggs & Stratton's successful growth throughout the 1950s and 1960s.
Stephen Briggs went on to purchase Evinrude and Johnson Outboards and start the Outboard Marine Corporation. Frederick P. Stratton Sr. (the son of Harold Stratton) served as Chairman of Briggs & Stratton until his death in 1962 (Harold also died that year). Frederick P. Stratton Jr. served as Chairman until his retirement in 2001.
In 1995, Briggs & Stratton sold the automotive component business. The resulting company is Strattec Security Corporation.
In 2000, the company acquired its consumer generator business from the Beacon Group and formed Briggs & Stratton Power Products. The Beacon Group had previously purchased the Consumer Products Division of Generac Corporation (now Generac Power Systems) in 1998. In 2005, the company added Simplicity Manufacturing Inc, and Snapper, Inc, to the Briggs & Stratton Power Products line. Murray, Inc, one of its largest customers, collapsed owing to the company's $40 million, and to minimize the loss Briggs & Stratton purchased the name, marketing rights, and product designs of that company. In 2008, Briggs & Stratton announced it would be acquiring the Victa Lawn Care business from GUD Holdings Limited Australia for A$23 million.
In 2019, Briggs & Stratton announced they would be closing their engine factory in Murray, Kentucky with production being moved to their Poplar Bluff, Missouri facility.
On July 20, 2020, Briggs & Stratton filed for Chapter 11 bankruptcy. KPS Capital Partners would purchase a majority of the company stake for $550 Million.
On September 22, 2020, KPS Capital Partners closed on the acquisition of Briggs and Stratton. This sale waives the $900 million that Briggs owed going into bankruptcy.

Пікірлер: 119
@eddymumford4086
@eddymumford4086 3 ай бұрын
Briggs and Stratton soups yummy 😁
@AJRestoration
@AJRestoration 3 ай бұрын
So good!
@Dan-il9rz
@Dan-il9rz 2 жыл бұрын
First engine I ever rebuilt was a 3 HP B&S in shop class in junior high in 1968. Great video.
@eddiep5676
@eddiep5676 2 жыл бұрын
Did the same in 1979…..resulted in a life long ability to work on all kinds of things, not just small gas engines. Probably the most useful class that I ever had.
@mskayla7747
@mskayla7747 2 жыл бұрын
My experience was 1978, high school shop class. Needed half a credit for graduation. I was the only girl in the class, and I ran circles around the boys. They missed putting the valve lifters back in, on reassembly. That was on the one day I missed class. I found them in the parts tote, and reinstalled them myself.
@JorgeRodriguez-po7kx
@JorgeRodriguez-po7kx 2 жыл бұрын
Thanks for the Video now I have something to Watch on my Lunch Break at Work in two or three days 😁
@AJRestoration
@AJRestoration 2 жыл бұрын
Hope you enjoy!
@telecomgear
@telecomgear 2 жыл бұрын
One of the manliest motors in small engine history.
@robertmailhos8159
@robertmailhos8159 2 жыл бұрын
Part 2 is going to be interesting to say the least. I'll be there Young Man 😎
@AJRestoration
@AJRestoration 2 жыл бұрын
Thank you so much Robert! Glad you like what I am doing!
@robertmailhos8159
@robertmailhos8159 2 жыл бұрын
@@AJRestoration you are doing well on restoration of the things that need to be saved from the scrap yard the engine you are doing is worth saving for a project you have waiting for it 👍👍
@glennsoucy4359
@glennsoucy4359 2 жыл бұрын
Perfect timing!! I am currently doing a 5hp version of the same engine. Yep, A 1974 also
@AJRestoration
@AJRestoration 2 жыл бұрын
Wow that is some coincidence!
@beachthor1
@beachthor1 19 күн бұрын
I have this same carb on a 4hp B&S, looking forward to seeing how to go about cleaning it
@mjg263
@mjg263 2 жыл бұрын
Boy that white powder coat came out nice! 👍
@oprxghost4859
@oprxghost4859 2 жыл бұрын
I have the same engine Iv been rebuilding for a go kart and let em tell you Changing the carburetor is a pain in the ass
@AJRestoration
@AJRestoration 2 жыл бұрын
I hate these carbs from Briggs & Stratton. I retrofit a Honda carb and be done.
@buckfuhtt2083
@buckfuhtt2083 Жыл бұрын
@@AJRestoration You should just do what I did this week and find a shelf with 4 of them brand new in the box with the "READ THIS BEFORE OPERATING" tag still on the gas cap and everything, whole cleaning out a hoarders disgusting shop . Also found 2 Tecumseh 6hp in the box.😁
@MarkMeadows90
@MarkMeadows90 2 жыл бұрын
My dad worked a few of the old 1970's and 1980's series Briggs motors when I was a kid. Both the 3, 5, and 6 HP ones. One of the scrap 6 HP ones he restored eventually went into my first go kart back in 1997. He restored/customized the engine to produce a little bit more power and torque. Added a slightly bigger sprocket for more top end speed. I got one of those bicycle speedometers and I remember the fastest I went on a go kart was around 52 MPH on the road. It was a bit dangerous from what I remember. Didn't wear a helmet and the go kart didn't have a roll bar. It was one of those classic style 60s type go karts. Was a lot of fun, but sold that go kart back in 2001 because I kinda grew out of it. Lot of memories for sure.
@slimwantedman6694
@slimwantedman6694 2 жыл бұрын
Good morning from Southeast South Dakota
@AJRestoration
@AJRestoration 2 жыл бұрын
Morning!
@peterc4056
@peterc4056 2 жыл бұрын
I'm having flashbacks to 9th grade auto shop, where rebuilding one of these was the project that familiarized us with ICEs.
@davidwillard7334
@davidwillard7334 2 жыл бұрын
To WASTE !! THE !! TEACHERS !! TIME !!
@trojanpussy
@trojanpussy 2 жыл бұрын
As if i see my granddad stretching his brain about how to get every part back in the right place in the right order and me helping. Great this feeling of 'motorlove'
@christophereininger6704
@christophereininger6704 2 жыл бұрын
Nice job! I like the little blue car... ; )
@AJRestoration
@AJRestoration 2 жыл бұрын
Me too!
@rudy6458
@rudy6458 Жыл бұрын
Loved the video, have a 3hp Briggs for power ladder. Had gas in oil after 25 years.Runs pretty good, trying to sell it, power ladder.
@angeldawnmorningstar
@angeldawnmorningstar 2 жыл бұрын
that engine seems to be a fairly nice , low-hour survivor ..even considering that the previous owner ( obviously a cotton-headed ninny-muggins ) failed to change the oil regularly , which is crucial in these small oil-splash lubrication engines 👍👍👍👍👍👍
@kellydiver
@kellydiver 2 жыл бұрын
I would never be able to figure out where all those dang screws go! 😂
@zerkermond
@zerkermond 2 жыл бұрын
I died laughing at the 11:45 mark of this video... Your little quib about the bolt you forgot had me suspect something was awry...off to work thanks for this mornings coffee and KZbin sesh 👍
@damiencwalker
@damiencwalker 2 жыл бұрын
my whole life I've never seen anybody paint a small engine flywheel
@AJRestoration
@AJRestoration 2 жыл бұрын
Flywheel also needs some love!
@KrazyMitchAdventures
@KrazyMitchAdventures 2 жыл бұрын
Another great Video AJ.. Thanks
@AJRestoration
@AJRestoration 2 жыл бұрын
Glad you enjoyed it
@hepeng2627
@hepeng2627 Жыл бұрын
thanks share this video
@jmeady
@jmeady 2 жыл бұрын
Had this engine on a old mower. Wish I had it back.
@aapelnaut
@aapelnaut 4 ай бұрын
Why did you not measured valve clearance before dismantling the engine????? Easy to grind needed amount material of the valve head before assembly.
@AJRestoration
@AJRestoration 4 ай бұрын
Because the valves will be lapped, that will be done in the assembly stage, making it useless to measure the valve lash before the dismantling.
@dorritsmedsgard5900
@dorritsmedsgard5900 2 жыл бұрын
I look forward to episode 2
@robertgilmour1903
@robertgilmour1903 2 жыл бұрын
I haven't seen many flying pigs in my time but I can say I've seen a flying "Briggs". It is official I'm weird I found the sight of small particulate matter disappearing up a vacuum tube to be almost as satisfying as the rest of the video.
@ThouBeteraNay
@ThouBeteraNay 2 жыл бұрын
AJ: *puts a wrench into the bag in right position Me: Thank you!
@AJRestoration
@AJRestoration 2 жыл бұрын
You are most welcome!
@Chris-uu3cp
@Chris-uu3cp 2 жыл бұрын
Great video, thanks for sharing!
@AJRestoration
@AJRestoration 2 жыл бұрын
Thanks for watching!
@reneperalesperez150
@reneperalesperez150 2 жыл бұрын
Only fo the description about the engine!!! Mi like it.. respect amigo
@Austeration
@Austeration 2 жыл бұрын
Nice work 👍 loved the pull down and clean up.
@AJRestoration
@AJRestoration 2 жыл бұрын
Awesome, thank you!
@davidwillard7334
@davidwillard7334 2 жыл бұрын
SHOWS !! !! YOU !! WHAT !! A !! PILE !! OF !! JUNK !!! THEY !! REALLY !! WERE !!
@andymiller5611
@andymiller5611 2 жыл бұрын
Very nice! Looking forward to the next episode! 👍
@RandomTubePT
@RandomTubePT 2 жыл бұрын
Impressive, Congrats Bro 💯👍
@hoperestoration5595
@hoperestoration5595 2 жыл бұрын
great restoration dear i love this
@restaurandocoisasvelhas
@restaurandocoisasvelhas 2 жыл бұрын
Hello Friend. It was very good. Hugs from Brazil.
@oneshotme
@oneshotme 2 жыл бұрын
Looking good so far and don't you hate it when things (bolt) are hiding in plain site? LOL Enjoyed the video and I gave it a Thumbs Up
@colin_5839
@colin_5839 2 жыл бұрын
Looks good so far! Just as you do all the mechanical stuff to this remember that this is a Kool Bore Briggs and honing the cylinder will destroy it! Don't want to ruin your restoration by doing that! Just clean it up as best you can without honing and call it a day! Also if you need other parts like Rings and whatnot I have a really good parts guy you can contact!
@rustyfolts3298
@rustyfolts3298 2 жыл бұрын
Very light, very is ok.
@davidwillard7334
@davidwillard7334 2 жыл бұрын
Honing ! Is !! CRAP !! SLEDGEHAMMER IT !! IS ! WHAT !! YOU ! DO !!
@re-fix9678
@re-fix9678 2 жыл бұрын
nice
@bernardsantiqueengines3128
@bernardsantiqueengines3128 2 жыл бұрын
Mooi André!👌👌😁. Ek het vir jou die oorspronklike lug filter doppe en ek het ń splinter nuwe spons ook as jy belang stel?
@AJRestoration
@AJRestoration 2 жыл бұрын
Baie dankie! Ek al glad nie nee se nie. Stuur my email na andre8swarts@gmail.com asb
@SouthwestDesertExplorer
@SouthwestDesertExplorer 2 жыл бұрын
Hi - Great job. Can you tell me the engine model number for this engine. My dad has one and is having a heck of a time finding a solid state coil replacement due to the engine number has rusted away. Thanks!!! ~ G
@valmirramos4195
@valmirramos4195 2 жыл бұрын
Valeu AJ! Fico no aguardo da parte 2. Muito bom 👍
@leswallis8158
@leswallis8158 2 жыл бұрын
Just did a 2 hp same type motor I had on a minibike as a kid. And did a rebuild in auto shop in high school just like the engine times were easier back then
@dangergeezeer2100
@dangergeezeer2100 2 жыл бұрын
I can't find the right coil pack for this type of engine any help would be greatly appreciated
@AJRestoration
@AJRestoration 2 жыл бұрын
Ebay should have a few new old stock. Most of these coil packs fit universally so a 2hp coil will fit the 3hp. Just make sure the shape is the same as your old coil.
@jimhogan1308
@jimhogan1308 2 жыл бұрын
Part 2?
@jamesmoates8490
@jamesmoates8490 2 жыл бұрын
Looks like the engine 2guys were building when I was in Vocational Agricultural school in the 10th grade in 1985 and they forgot to to torque the connecting rod to the crankshaft and when they started it up and reved it it came loose and blew a 4 inch hole in the crankcase. No one got hurt but it sure scared the crap out of everyone !
@REVNUMANEWBERN
@REVNUMANEWBERN 2 жыл бұрын
😂😂😂😆😆😆 Looks like the teacher wasn't too attentive
@Argumedies
@Argumedies 2 жыл бұрын
The one thing about BnS is just how easy they are to work on
@davidwillard7334
@davidwillard7334 2 жыл бұрын
FOR !! THE !! METAL !! SHREADDER !! EXCELLENT !! AS !!
@REVNUMANEWBERN
@REVNUMANEWBERN 2 жыл бұрын
Just bought a Kees walk behind that I think has the SAME style mower, maybe a larger HP, it is locked up, I will watch this CLOSELY when I begin to take apart, MAY have some questions in the future
@jamescole6846
@jamescole6846 2 жыл бұрын
All my growing up kid years in the 70's I had to mow the law with a 60s Wizard 22 Walk Behind Lawn Mower, 3 HP B&S almost identical to this one but with the down shaft. Green deck, white motor 4 wheels and a push bar and I mean there was nothing else on the mower. not even a grass guard. It was left outside and we kept the motor covered with a 5 or 7 gallon bucket that fit perfectly over the motor. It never failed to start in 10 years and we were the 2nd or 3rd owner.
@davidwillard7334
@davidwillard7334 2 жыл бұрын
I GUESS ! THE !! LAW !! WASN'T !! IMPRESSED !!! AT !! ALL !! WITH ! YOU !!
@jamescole6846
@jamescole6846 2 жыл бұрын
@@davidwillard7334 WTF Does the law have to do with me having one of these engines?
@davidwillard7334
@davidwillard7334 2 жыл бұрын
@@jamescole6846 Congratulations !! On ! You !! Getting !! CLEARLY !! CONFUSED !!
@jamescole6846
@jamescole6846 2 жыл бұрын
@@davidwillard7334 You take your meds today? GD right I am confused WTF kind of comment is that it makes no sense.
@davidwillard7334
@davidwillard7334 2 жыл бұрын
@@jamescole6846 AT !! LEAST !! MISTER !! BROWN !! HAS !! COMMON !! SENSE !!
@michaelw5112
@michaelw5112 2 жыл бұрын
Bet there wasn't a single metric socket needed.
@AJRestoration
@AJRestoration 2 жыл бұрын
None haha
@michaelw5112
@michaelw5112 2 жыл бұрын
@@AJRestoration Ahh.. back in the day when Briggs made everlasting engines. Me and my grandfather used to tear down motors just like that one all the time. We used them to pump water for cattle.
@trojanpussy
@trojanpussy 2 жыл бұрын
You could fly an airoplane with it, such a strong engine. So then i wanted ( him) too build a plane. But learning about the costs i agreed on selling it ( as if i where to say)
@user-sr8xj8eb5e
@user-sr8xj8eb5e 2 жыл бұрын
نا عندى جميع الا موديلت الا ابيض وا الا احمر واالا اخضر من ،1969 .1950
@D3M0320
@D3M0320 2 жыл бұрын
When you shock the parts and spray them, is that powder coating? Would you possibly do a tutorial on that process one day?
@AJRestoration
@AJRestoration 2 жыл бұрын
I could do that yes, and yes it is powder coating. I shock the parts mainly to see if I switched the device on.
@danilopaclitadepaz6157
@danilopaclitadepaz6157 2 жыл бұрын
Robin 7.5 hp how to over hall.
@ramongonzalez2909
@ramongonzalez2909 2 жыл бұрын
I have a few of those also have some 2 1/2hp. I’m going to try converting one of them to hit n miss.
@davidwillard7334
@davidwillard7334 2 жыл бұрын
Did Briggs ever Make a One ! H.p !??
@ramongonzalez2909
@ramongonzalez2909 2 жыл бұрын
@@davidwillard7334 I wish anyone feel free to correct me if I’m wrong but the 2-1/2 hp is the smallest engine they’ve ever made.
@independentthinker8930
@independentthinker8930 2 жыл бұрын
I'm trying to resurrect one just like it now. That's not near as crusty as the one I got
@hellhound1389
@hellhound1389 2 жыл бұрын
I used to work on these all the time, the first thing I'd do was throw away the carb and gas tank and build an adaptor to use a tecumsah carb so it would run better and less maintenance cuz Briggs carbs suck
@AJRestoration
@AJRestoration 2 жыл бұрын
Briggs carbs suck! I agree with you there. Especially the carbs that use the diaphragm (I hate those)
@hellhound1389
@hellhound1389 2 жыл бұрын
@@AJRestoration you'd fix it and a month later they'd be back with the same problem and if you ran it wide open no how brief it would blow out the diaphragm which meant they were no good for anything beyond a pushmower
@davidwillard7334
@davidwillard7334 2 жыл бұрын
YOU !! SHOULD ! HAVE ! PUT !! THE !! BRIGGS !! STRAIGHT !! INTO !! THE !! METAL !! SHREADDER !!!
@jbidinger
@jbidinger 2 жыл бұрын
13:28 When you had Taco Bell the night before...
@AJRestoration
@AJRestoration 2 жыл бұрын
Hahahaha spot on!
@briangosnell2804
@briangosnell2804 5 ай бұрын
I have the same motor any idea where to land parts
@AJRestoration
@AJRestoration 5 ай бұрын
Some pages on facebook sell new old stock. Search for Vintage Briggs & Stratton Engines
@Samurai-yc4jr
@Samurai-yc4jr Жыл бұрын
which spark plugs can be used for this model
@vuvanle8437
@vuvanle8437 2 жыл бұрын
3 hp gì mà pit tông bành kỹ vậy, cái này phải 9 hp mới đúng.
@danwhitfield7579
@danwhitfield7579 Жыл бұрын
Hi, could you tell me the model number of this engine ? I have one that looks the same, an I would like to restore it, but has no model number on it. Thanks Dan
@edenwildfood8589
@edenwildfood8589 2 жыл бұрын
May I ask what size/cfm air compressor you use for sanblasting
@DuTangTheCryptoSurfr
@DuTangTheCryptoSurfr 10 ай бұрын
⚡️⚡️⚡️⚡️
@RDAudioProo
@RDAudioProo 2 жыл бұрын
11:32 Hahaha
@AJRestoration
@AJRestoration 2 жыл бұрын
Hahaha that almost gave me a heart attack when that happened!
@JerroldKrenek
@JerroldKrenek 2 жыл бұрын
lol made me jump back
@persioboni9373
@persioboni9373 2 жыл бұрын
Muito bom até aqui Parabéns !
@martyn6542
@martyn6542 2 жыл бұрын
Why did you spray the blades black should of kept them silver
@AJRestoration
@AJRestoration 2 жыл бұрын
Why not?
@ghfddfjf3654
@ghfddfjf3654 2 жыл бұрын
wow what kind of paint is used at the end
@joejoe437
@joejoe437 2 жыл бұрын
11:37,😂🤣
@helenpalmer869
@helenpalmer869 2 жыл бұрын
How long did the restoration take?
@AJRestoration
@AJRestoration 2 жыл бұрын
Part 1 took me 8 days.
@user-cf1mr3fd7h
@user-cf1mr3fd7h 2 жыл бұрын
На кадви похож .
@user-xe2ub4rh1q
@user-xe2ub4rh1q 2 жыл бұрын
👍👍👍
@tevhidnuru536
@tevhidnuru536 2 жыл бұрын
😎👌
@vuvanle8437
@vuvanle8437 2 жыл бұрын
Đồ của usa mà phải biết chớ, đồ nhật chẳng nghĩa gì.
@Forestcamp313
@Forestcamp313 2 жыл бұрын
Nice work👌👌👌👌👌👌
@myrestorations
@myrestorations 2 жыл бұрын
Top vídeo 🤝
1974 Briggs & Stratton 3HP Motor Restoration [Part 2 of 2]
31:24
AJ Restorations
Рет қаралды 62 М.
1985 3 HP BRIGGS ENGINE REPAIR (part 1)
18:54
805ROADKING
Рет қаралды 74 М.
7 Days Stranded In A Cave
17:59
MrBeast
Рет қаралды 88 МЛН
Magic? 😨
00:14
Andrey Grechka
Рет қаралды 16 МЛН
Schoolboy Runaway в реальной жизни🤣@onLI_gAmeS
00:31
МишАня
Рет қаралды 3,4 МЛН
managed to catch #tiktok
00:16
Анастасия Тарасова
Рет қаралды 43 МЛН
VINTAGE BRIGGS & STRATTON  - CAN WE SAVE IT?
35:56
Vintage Engine Repairs
Рет қаралды 36 М.
12cc Holt H75 Tractor Engine with shipping damage.
12:26
AJ Restorations
Рет қаралды 26 М.
Make A Teeny-Tiny Model Airplane Engine From Scratch
31:59
JellyFish Machine
Рет қаралды 797 М.
Engine Restoration of a 1958 Pedal Moped (Jawa Stadion 50cc 2T)
28:04
Dirty 3hp Briggs & Stratton Engine Restoration - Part Two.
26:22
AJ Restorations
Рет қаралды 120 М.
Why Did Briggs Stop Making The Flathead Engine?
9:57
INSIDE HOUSE GARAGE
Рет қаралды 166 М.
RUSTY ABANDONED ENGINE RESTORATION
32:02
Machinery Restorer
Рет қаралды 71 М.
7 Days Stranded In A Cave
17:59
MrBeast
Рет қаралды 88 МЛН