1978 Super Cub C50 Engine RESTORATION | Restoration of 1978 Honda Super Cub C50 Part2

[@MetalRestorationBho]

where are you from?

[@ivanchaparro84]

I am from Argentina... Instagram @1v4n.v3r0

[@ivanchaparro84]

do you have Instagram?

[@hazlotumismoazucarillo3.0]

Es españa

[@tzortzis4000]

Greece!

[@franciscoemanuel3361]

República del Paraguay

[@СлаваНесмеянов-г7я]

Кто нибудь из русских смотрит такие видео?

[@СЕМИДЕСЯТИКУБОВЫЙ]

Привет с Омска)

[@МишаТимофеев-ш8ф]

Я=)

[@ИгорьЛомоносов-х4ш]

Кнш

[@АндрейПарамонов-щ8г]

да)

[@Игорь-ф4т7г]

ну да, интересно же

[@gerardvandijk6807]

I hope the cylinder was cottered and honed prior to assembly. It had a deep groove! This is not a restoration; it is a mere reincarnation! Good job! Gerard, the Netherlands

[@HGSolberg]

The piston was brand new, so the cylinder was most probably bored. And he used a brand new ignition plate too. (Despite cleaning the old one, but it would never have worked anyway.)

[@screwsnutsandbolts]

Great job !

[@InventorChannel2023]

Good job bro you're a genius! 👍👍

[@aiman272]

The Honda mopeds with these engines were so plentiful in Malaysia. Mostly the C70 GBO and C70 GBO-J. I have seen some guys polished the magneto and clutch cover into deep mirror shine and some motorcycle spareparts even sell the chromed ones. It look really nice. Most parts were locally made and some came from Thailand. These engines have a good reputation of being so reliable and bullet proof!

[@MetalRestorationBho]

thank bro for sharing

[@HGSolberg]

The Honda Cub is the world's most sold vehicle of any kind. Way more than 100 million produced from 1958 and up until today.

[@natmichael8866]

Very good job!👍👍👍

[@MetalRestorationBho]

thank👍👍👍

[@БиллиБонс-н5р]

Уважения достоин. Лайк.подписка.респект.

[@ivanchaparro84]

I can't believe how that engine looked! spectacular, to think that I have an equal engine lying in the back of my yard thanks to your video I'm going to restore it ... greetings from Bahía Blanca, Argentina.

[@FernandoGarcia-cv5mu]

Sell the engine to me.

[@MetalRestorationBho]

thank bro

[@fmscooter768]

i love your stuff, i know garages that have ten times more professional tools but they are doing ten times worser jobs than you are, thankful that you put your work on videos, thanks dude!!

[@MetalRestorationBho]

thank so much 👍👍👍

[@ZiperFoxT]

Нет слов. Это шикарно, говорю сам как Мото механик со стажем

[@amanmambet7568]

Только вот перед разборкой правильно было бы помыть всё снаружи, смыть всю грязь и оставшийся песок, а не только счистить глину :)

[@RustleMike]

Отдирание головки от цилиндра отвертками, установка цилиндра с такой царапиной на весь ход поршня, непритертые клапана, выдирание пальца плоскогубцами, установка фигурной втулки без масляной пленки, накидывание крышки с сальником кикстартера таким неаккуратным способом, сборка после обработки наждаком с микроабразивом... простите, а вы тоже такой механик и чините на уровне ребенка из какого-нибудь Бангладеша?

[@ВикторТишкин-ж2о]

Про Димексид не слышал автор.

[@fixedguitar47]

Best thing about Honda is there parts department. Doesn’t matter what year you have, they got the part your gonna need.

[@Atlas-qd4go]

In Brazil we say that you can find Honda parts even in a bakery😂

[@mose717]

Unless it's an '88 Shadow 1100.

[@diycraftivity988]

Good job bro. 🔥 🔥 🔥

[@毛穴リーブス-z9m]

I'm watching from Japan. I'm impressed with your technology

[@ohagi73]

すげぇ、見違えるほど綺麗になったし本当にエンジンがかかるとは思っていなかった。

[@gtrman9706]

Nice work.Very enjoyable to watch.

[@metusalemi3715]

Greetings Finland :Christmas Santa Claus👍

[@MetalRestorationBho]

thank bro

[@MartinProavis]

Honda, das original motor❤

[@MetalRestorationBho]

Thanks for your feedback. I hope you will support us in the next video.♥️♥️♥️

[@claudiotrombetti2626]

Sei un Grande Complimenti

[@джексоня]

Оххх пиз....шь эти моторы щаз стоят на всей китайской технике и даже прокладки зелёные

[@СергейСергеевич-ь4ю]

Потому что Китайцы спиздили этот мотор,как раз у Хонды

[@vago8587]

китайцы просто щас делают так то это хондовский мотор

[@amanmambet7568]

Это знаменитый хондовский мотор, клонирован китайцами

[@Earllons]

@@amanmambet7568 на альфы ставят

[@Gamesplaygames321]

У меня на Пит байке стоит такой же 125 кубов

[@rifayrepack212]

Keren banget gan

[@eqyarianta7347]

Nice video 😍

[@MetalRestorationBho]

Thanks for your feedback. I hope you will support us in the next video

[@adrianwilliams763]

Nice project and great to see one of these engines running again. Tip: Using a wire brush to the clean/polish aluminium is a REALLY bad idea. Tiny steel particles from the wire will embed themselves into the aluminium and cause corrosion. Use a synthetic wheel such as 3M scour pad (Scotch-Brite) . Much more friendly to aluminium.

[@MetalRestorationBho]

thanks

[@kirpov_]

Движок от альфочки)))

[@МаксимМазур-н7з]

Ето хонда

[@warpedone2]

Thanks for filming

[@lord.onk99]

Clever buggers, im very impressed, well done. Good Luck.

[@lord.onk99]

Essex UK

[@camdenernst6133]

You should start restoring whole dirt bikes and make them look brand new

[@KillerKiller655]

An artist !!

[@duongvanhieuvlog3694]

😍 like 👍

[@brentneves3602]

What an amazing restoration job, you are obviously very familiar with this style of engine, I don't have much experience with the semiautomatic motorcycle transmissions, I find them complicated compared to regular manual clutch setup. Great job on an engine that looked hopeless, now it like new again.

[@HGSolberg]

Except for the centrifugal clutch, there's really no difference.

[@restorationbykostas]

Hello my friend..nice work.. But I think it's better to paint the engine with heat paint to protect the metal!

[@michailtsimpoukelis4747]

Very good job!! Bravo!!

[@craigmonteforte1478]

Awesome skills my freind !

[@buooif]

Nhìn đôi dép là biết người VN :v em đã sub ủng hộ anh !

[@sinformant]

The begining background music sounded like "fire on the mountain" by the marshall tucker band

[@justinneal5699]

sinformant idk where u hear that lol

[@sinformant]

@@justinneal5699 sorry I meant to specify. The begining did

[@justinneal5699]

sinformant ohh I see now it does

[@MetalRestorationBho]

Thanks for your feedback. I hope you will support us in the next video.🥰🙏🙏

[@kylehuff5150]

Nice Job!! Great video.

[@bluedogfish2]

I had a mustard honda 50, ran great never a problem

[@davidebedin5935]

Wow!Amazing job,you're a very good mechanic!

[@memesteryshack16]

This is the same engine as mine so i know how to fix it now :)

[@Dstromb232]

Nice video!! I have the same motor new in a crate in my garage. I use to work for a Honda dealer as a mechanic and when the owner sold the shop he gave me the motor that he had in stock. That was over 40 years ago and that how long I have it for. Your video make me want to open the crate to look at it.

[@Micscience]

That engine looks identical to all the chinese dirt bike engines.

[@edwardchance2543]

Chinese copies the honda engine same way predator engine from harbour freight is honda clone

[@Jortsa]

This is real honda one! Any 50-160cc is copied out of real honda one

[@bossracing3387]

i like the wire wheeling the aluminum case . looks nice

[@vintagetintrader1062]

I have a 2007 CRF70 engine that looks identical to this engine, I’m doing the same basic freshen up but replacing the top end with a 88 kit, free HP. The Chinese copied these engines then even created a different version using a Kawasaki based top end (YX140/YX160 and so on) but for me it’s the original short stroke Honda. Nice work

[@radioguy1620]

you need a clear plastic shield for the wire brush, crazy

[@schuur10]

Berry nice de-deng-deng you make

[@ЭдМонстр]

Владельцы альфы поймут :)

[@РечнойРомантик]

Русский коммент 31.12.19 с наступающем!

[@РечнойРомантик]

@ТЕХНО БЕСПРЕДЕЛ лишь бы доебаться,жить скучно?!

[@paulthompson8613]

Always a pleasure to watch you work you make it look so easy :-)

[@Ghostdog4]

Another great job! Well done my Brother from another Mother. Whoever gets that bike will be fortunate!

[@moonbar33]

A pleasure to watch 😁👍

[@modelcustomcars6432]

Un trabajo expectacular!! Impresionante el gran resultado de la restauración.

[@MirceaD28]

Great job man. Have a beautiful Christmas. What is that substance that you are using to remove the Aluminium corrosion?

[@MetalRestorationBho]

thank you so much

[@carlosvargascardona6513]

Feliz año 😃😃

[@hendosexperience4703]

Great job, thank you.

[@clarklindquist8137]

Please... No background music.... Otherwise great video

[@MetalRestorationBho]

thank for sharing

[@chr1z0r]

learn how to use your volume control

[@digipadstudios3892]

this is just too satisfying to watch.

[@JensEskildsen]

Awesome, what was used to remove the oxidation? it worked so fast!

[@HGSolberg]

I was wondering the same thing. I would like to know. Caustic soda maybe?

[@paulrackley5326]

i liked that but only a young man could do most of the work bending over on the ground.. my back would have gone by the time i got to the conrod.. good video..

[@michaellong6605]

Skilled hands and quick mind.

[@mmotorcycles9497]

Well done bringing it back to life.

[@chriskennard5920]

Hmm, a very unusual valve spring compressor!

[@HGSolberg]

Surprisingly, it seemed to work during assembly too.... :)

[@xrahmane]

*wow very good 👌*

[@MetalRestorationBho]

thank you🙂🙂🙂

[@kreepstori3832]

Класс🖒🖒🖒

[@MarceQ01]

Que belleza de vídeo!!! 👏👏👏👏

[@tuhuynhthanh3626]

Phục chế máy Dream II đi ad ơi!

[@alternator7893]

Beautiful

[@american0153]

What chemicals did you use to remove the oxidation on the side covers?

[@hussssshie]

Uses RTV Puts a gasket on top **Confused flip flop noises**

[@renenissen3576]

Well done it looks so good, but for god sake use some gloves

[@roberthancock7708]

i love this channel and the music

[@georgepretnick4460]

I noticed the kick start boss had broke out of the main case and had been welded back in place. Look close, you'll see the weld.

[@kokhoz]

14:50 а что так можно было?))

[@gjedda63]

You are truly skilled and doing a great job. 👏👏👏💪

[@nawainrukalfank1703]

Very nice video,in video, i see scooter there, please the next video, would you restore scooter

[@MetalRestorationBho]

thank bro

[@fhazz]

After this motorcycle.....try to restoring Modenas Kriss 110...it pretty nice

[@MetalRestorationBho]

thank bro 👍👍👍

[@nvsupercub6294]

Sắp có clip mới chưa ông

[@MetalRestorationBho]

Thanks for your feedback. I hope you will support us in the next video.🥰🙏🙏

[@daviddefortier5970]

What is that stuff you used to remove oxidation @ 9:00

[@toproman601]

Мммм да , такие движки щас на всех китайских питбайках и на мопедах стоят .

[@vansxatin3408]

Класс! Движок похож на китайский fmi 154))

[@davidives7997]

Nice job. I already forgot what part goes where!!🤣

[@nongduyquang3375]

kênh này của người VIệt Nam nè :VV

[@pupi149]

Muy bueno, ya tenés motor para dar la vuelta al mundo. 👍

[@s737500]

Fantastic video. I could have used this 25 years ago when I had a Honda CD-50 :-)

[@ivanmillar7084]

Maestro....!!!

[@hazlotumismoazucarillo3.0]

Guaaaauuuu Felicidades

[@bejoae6119]

Hebaaaat

[@richardcook3310]

Crunchie lives to see another day

[@themendesmendes9712]

😎😎😎👏👏👏👏👏

[@irinapristupa445]

Клас ,все красиво,

[@nandom3]

Very nicely done! Congrats. Just a question... what liquid did you use to remove oxidation(grey stains) from aluminum (engine covers)? Thanks.

[@Scott924m]

impressive only wish you would have polish the covers more to make it nicer

[@mitchellsavage313]

Bad ass dude

[@Pouya-]

May you Please use gloves ( for your safety ) And remove the background music let us hear some satisfying sounds 😌

[@ipad1729]

Who uses gloves you gay or something

[@kenhxebiznew8446]

Vietnam like

[@zacharyeckert7163]

Did you replace the crank/connecting rod? I have a z50 and the connecting rod bushing is loose and the crankshaft/connecting rod assembly is the only part of the engine that I can’t find.

[@kenroman2977]

I WISH I COULD BE AS SMART AS YOU

[@alexnadeev7661]

А спидометр будет работать?

[@firerejack1121]

My dream bike the super cub c50 I was gonna buy one as a restoration project for really cheap but it was too far away

[@marcryvon]

I had one 50 years ago. Sold it for 50$ to buy a ratty car. I still kick me in the butt ! It would be perfect for running errand in my suburb now... Dumb me.

[@firerejack1121]

Marc René Yvon mannn I bet that’s one of your biggest regrets lol

[@fw1421]

My God that’s some nasty oil! But it protected the innards of that engine. Wow!👍🏻👍🏻👍🏻

[@czesiokolo4957]

**Chinese fmb 139: You know i'm something of a Honda myself**

[@switelolo1241]

to samo miałem pisać... :D

[@x11Sl]

Это хондовский двигатель, китайцы его копировали