1984 Goldwing GL1200 homemade Poor Boy alternator conversion

[@patmiller9770]

I added a similar conversion on my 84 Aspencade and it worked perfectly and didn't have to modify or cut the lower fairings at all. Everything fits underneath. I didn't use the existing fan. I removed it and added a 9" low profile pusher fan in front of the radiator. Much simpler and looks good and works well.

[@Yakarty]

How much amperes you need from the alternator for that modification. I mean am just about to install a 100 amperes 12 volts alternator for the modifications I have in mind, but I'm afraid if that could burn electric components

[@663rainmaker]

I have a tale of two Honda’s...Dusty and Rusty ! GL 1200 just got two fer’s ! Two 1984 GL 1200’s .... got Dusty Running again and one thing at a time! Enjoy the ride ! Gold Wings ride like a dream

[@halpayne612]

Dang Chris you work like I do parts everywhere.People dont understand there is a method to the madness.LOL

[@jimmyrupe9042]

I have a 86 Goldwing and this is great post the rest soon

[@mkyonepunch]

great video, can't wait to see an update. I did an alternator conversion on my Plymouth. wish I'd thought to film it. screw paying big money on a kit. make your own.

[@tazz1857]

do you know how to order the crank pulley in the uk? thanks

[@martyphillips9220]

How are you doing? I think it's awesome what you've done here. Are there any Pros and Cons on doing this Conversion? I have a 1200 Goldwing Interstate also, Do you have Specs and links to where to get the items at? Also if you can update the video. How's it performing would be alsome. ✔️

[@georgemooyman7155]

Would have been good to have see the job finished.

[@runjiisaac2380]

Sorry for lack of information but I have a GL 1100 78. I have a bad stator. Can this work for me?

[@lebourgdidier1556]

hello I started the modification but how did you manage to lengthen the screw which is on the camshaft, it looks like an American screw and I can't find a longer one, how did you do it? Sincerely.

[@MEGAPARTY140]

Take the original cam shaft screw to a tractor supply store and look for longer one about 3.5 inches with same thread pitch. Best to you! 👍

[@vernonricker9910]

Yes the bolt for the pulley..size.and length.

[@williamgallo7479]

What is the part # for the Alternator or the car it was made for? Nice Vid...

[@gervaisfillion9417]

800$,,,way to much for my budget,i am doing exactly the same as you did.Bravo Gf

[@663rainmaker]

Gervais Fillion I got two fers for 950

[@ChrisVarvil]

Say bud were did you get your pulleys from

[@HiddeneyeInc]

Do you happen to have measurements on the mounts you made?

[@earlst2026]

Can you send me the exact measurements for the crank and alternator pulleys that i would have to ask for from RDK tools and the alternator information??? I would appreciate it.

[@cerealtiller]

Acetone will remove the Lacquer from those Aluminium Covers.

[@michaeldcaudill4635]

WHAT DIMITOR OF CRANKPULLEY DID YOU USE

[@hippielewis4768]

My first gold wing 1984

[@gosolobox]

How does the pulley attach to the crank?

[@guglielmodicarlo4139]

nothing like a nice clean work area, ,,,,,,l,ol

[@coyote102076]

Just curious how the progress is coming along on this. Nice vid and thanks for taking the time to show in detail how you made the bracket. A simple small internally regulated 1 wire alternator is hard to beat! :-D (( and fairly cheep to replace )) Good job!

[@gamemaster97]

COYOTE ADVENTURES sorry I'm just getting to ya, I didn't even know how to see comments until my 12 year old pointed them out lol. but anyway, got it all together, put probably 700 miles on it without a single problem. best time I ever spent, just wish I hadn't wasted 3 years letting it sit lol. and yeah, that single wire really made things easy, I even cut out all the other wiring that isn't needed. Guess I'll need to post a video of the finished product and it running, but I just spent so much time riding that it never crossed my mind!

[@jfrracing1]

how did u go about getting the alignment correct on ur altinator bracket ?

[@mikeparrish930]

helped a friend do this extremly very hard job lots of shit left out of the kit you have to build to make it work seams like taking motor out to replace stator is easer and cheaper

[@kevinrussell5099]

No, it's MUCH easier to do the kit, I've done both so I know that for a fact! Plus, when the next stator dies, and it probably will, ask me how I know, you're back to square one all over again. Now, if my alternator dies, it's about a one hour job and you're back in business!

[@craigbailey7229]

You must have got the last pulley from rdg tools with a 12 mm bore the only one they have left is a 2 and a half inch and that's not big enough a one to one pulley dont work so I'm going with a 4 inch pulley

[@daddyhermanson9737]

You were 80 percent of the way to just replace the stator for a $100 ?

[@daddyhermanson9737]

@Chris Earlywine I know where it is and I know the engine has to come out but he has 1/2 the bike ripped apart already ? I have had many goldwings and never lost a stator the one I have now I have owned at least 10 years and still working even has extra lights . If it did go I would pull the engine rather than fiddle with this .

[@daddyhermanson9737]

@Chris Earlywine its the faulty plug that causes the issue solder the wires and heat shrink it won't go bad in the first place just FYI

[@thejeepdoctor]

Someone should make a kit and sell them.

[@popskustoms3587]

It only takes 2 hrs to get the engine out .all the stuff your doing you'll have 20 hrs in it and it looks like crap

[@guilastocker8051]

Cost is stupid expensive, looks like poop when done. Man up and replace stator.

[@michaelputnam9301]

I wish that people could kindly provide videos without using foul and obscene language. It is so distracting and unnecessary. I actually stopped watching 1/2 way through.....

[@bearwilliams8564]

Oh boo hoo ya over sensitive pussbags, try growing a pair and not be offended by everything

[@chrisj197438]

BEAR Williams They’re gay lol

[@stevensapyak7971]

9.13.19. It’s just shoptalk .........every day shoptalk. ⚠️ I suppose some people would be offended that have never been around that environment.🙄

[@Iwillnotbepushed]

I’m a 33 year construction worker and I don’t like the foul language either. No I’m not offended it’s just more professional to leave it out.

[@Marco-os6vy]

Yeah, I agree with you Michael, bad language does`nt account for nothing, clean it up a bit mates OK ?