1985 Chevrolet Truck

457 Hp
428 Lb. Ft.
T-350 trans
lowered 6" in the rear and 4 1/2 in the front

[@TR3NDK1LL]

Probably the most badass truck I've ever seen.

[@supertiger2607]

Dude that's like the coolest oldie I've ever seen that a beast paint job, and exhaust

[@cwmoore1265]

yeah I remember when they came straight from the factory just like that. yeah right. sweet truck

[@dantewilcher1464]

😂🤣😂😂

[@softailjeff]

Nice looking truck, great sounding!

[@richperkins5192]

Damn coming in with the stock v6 😂😂 That truck is nasty dude!

[@galenrichard5706]

Nice truck I hope you still have it . Sounds great

[@SoapySupreme]

My uncle has the same truck, accept its all black and has a drag racing build. Nitrous and everything. The truck is super nice and REALLY fast.

[@B3RNIE17]

dat is a BADASS CHEVY!!!! SOUNDS AWSUMMM!! :)

[@mdrnotony91]

Love the truck! Really nice looking.

[@ColbysHotRods]

yes its lowered 4" in the front and 6" in the rear. wheels are a 15x8 in the front with a 255/60 tire and a 15x10 in the rear with a 275/60

[@TheOldcarlover]

Great sounding truck

[@eddieg85]

Wish my stock motor sounded like that lol

[@puddlesdog6652]

LMFAO ......

[@yaddi3434]

Thanks KZbin. It’s 2022. That was funny as hell. Nice truck.

[@SuperToast2010]

okay for all you guys talkin crap out there. when he said "stock motor" what he meant by that was it had a 350 in it and when they were first manufactured they had a 350 in it. and "factory paint " probably means that the black or the grey is original. or he might just be sarcastic

[@1stpettyofficerHardeman]

lmao...he did say "stock" right? nah, he added a lil more pepper to the gumbo.

[@nakternal]

Baddest stock motor Ive ever heard ;)

[@kickfreak23]

sick paint dude. nice sound too

[@datrevmeister]

yeah, that sounds stock

[@Driver670]

beautiful peice of americana. im going to get the same cam as you, it sounds beautiful and when you hit the gas, it tells people to back off!. CC10

[@lethrfas600]

Damn! that's a badass Chevy!

[@bludragontruck9743]

Love that stance

[@ColbysHotRods]

yes it does, damn demon carb, hard to tune

[@ColbysHotRods]

Thanks lol believe it or not, I do paint and bodywork, and building these smallblocks is just for fun. Have you seen the video of my blue S10?

[@ColbysHotRods]

cut the hole myself, the scoop is fro Mr. Gasket

[@ColbysHotRods]

@bossdillinger T-350 are fine with up to 500 hp, you just need to make sure its a fresh one, you need a shift kit of some sort, and a higher stall converter to transfer the power.

[@MattyGainz]

sounds pretty stock too me :P

[@ValdiviaCesarBro]

I have a truck that was made in mex that sounds exactly like this baddie , it's a 1990 Chevy Cheyenne , same style as the C10

[@garlitzhyperformancegarage8818]

Cesar Valdivia you're full of bullshit too I see

[@Redant23]

Perfect, but not stock lol

[@maineiack]

Stock motor? think your timing is off and you got an exhaust leak there buddy ha ha ha. Sick truck man.

[@ColbysHotRods]

yes and no. Yes, if you get the motor really hot and then park it where cold wind can blow up the pipes and get to the valves, it will burn a valve. No, if you do it smartly, it will not hurt nothing. Like i said i had about 2 or 3 feet of straight pipe, so it would make a small amount of backpressure and keep that from happening. Check out the other video of this truck with the exhaust i put on it.

[@frodo70444]

i wish i could set that start up as my alarm clock

[@ValleHermoso20]

Country Boy Can Survive !!!

[@isaacgamboa5677]

Like the wheels and tires

[@TWINBHYPER]

How much do you have it lowered? the stance is perfect. Awesome truck.

[@jdubcbr600]

Truck looks damn good then there's the wheels and that breather sticking out of the hood.

[@danielvee69]

Mean ass cam brotha

[@Cristo12344]

what kind of cam combination do have set up in this truck? it sounds nice

[@williammorton9176]

factory mexican pinstripe too!

[@julioenciso1253]

nice truck!!

[@chevygearhead454]

@3rdSuspension thats not true at all by making that rough idle ur opening the valves up longer therefore letting more air in and u wouldnt get that kind of throttle response if it was just for noise

[@18Aaron90]

nice truck

[@papantlaflyer68]

WOW !!!! THATS A NICE AND TOUGH LOOKING TRUCK , WHAT ABOUT RIMS /TIRES COMBINATION ? WISH I COULD TAKE A LOOK AT THE ENGINE , BUT I REALLY LIKE WHAT I SEE .... CHEERS , MAN !!!!

[@fernandorocha6486]

Very nice

[@ColbysHotRods]

350 Cubic inch Standard bore and stroke It has a T-350, 3 speed auto it takes alot of money to make it run like this one.

[@SnowCamo45]

Nice cam

[@82Painter]

will it hurt your truck to run just open headers and a little straight pipe? My buddy thought after a while it would hurt your motor....

[@AlvinTexas1]

I want to see some Vids of that pretty C-10 in the back...

[@82Painter]

when you took off the back bumper where did you get that piece in place of the bumper and what is it called?

[@threetwentynine]

Are you running straight pipes or open headers?

[@wyattjones3876]

That's that thumpr cam it sounds extremely fast but it probably runs as fast a stock 350 but still sounds great

[@timhoughland8267]

That sombitch sounds AWESOME!! What cam is in this beast??

[@Ejroy09]

Sharp truck there

[@winterkerry]

nice truck...what size meat do you have on it... looks staggered?

[@josiahceledon2623]

I would like to know that factory paint that you have on that truck

[@ColbysHotRods]

thank you

[@82Painter]

when you lower the truck do you have to buy anything to do it?

[@ColbysHotRods]

@BCrich628 In this video its open headers with about 2 foot of 3 inch pipe on both sides. :)

[@ColbysHotRods]

standard bore and stroke 350, just pushing at 11 to 1 compression

[@ColbysHotRods]

@bradenn no they were the drums that came on the truck, i just figured out the right offset

[@korn11000]

You can turn the stock 350 into a 383 just have buy a bigger crankshaft and graze the block walls where crank sits so it can fit. Its worth it.

[@86gtforme]

and rods... so pulling the engine for 33ci. if your already rebuilding an engine may be worth it but thats about it

[@traviscampbell389]

@pfcjamesmp I'd like to know that bottom goldfish color looks badass

[@DansChevy350K10]

Sounds nice. Witch thumpr cam is that?

[@82Painter]

what size of tires do you have on the front and back of your truck?

[@cesarpuga6258]

You have a badass truck there. What size are the wheels and tires?

[@82Painter]

on my truck i have headers with a litlle bit of pipe and then turbo mufflers and some more pipe and it dumps right before the back axle. I was gonna take the mufflers off and just run headers with like 3 or 4 foot of pipe and then have the pipe end right before the back axle where it is now so that should be okay. I put alot of money in my motor i just dont wanna ruin it lol ya know

[@ColbysHotRods]

@lilgoss912 : standard bore and stroke 350

[@jimthomas777]

Colby J , No stock small block 350 Chevy made 457hp in 1985 or any other year , they did with high compression pistons , big cam , big carb , ported heads , aluminum high rise intake , headers , but not stock from the factory

[@ColbysHotRods]

Jegs P/N 249-12-600-4 Thumpr Hydraulic Flat Tappet Cam Adv/Dur: 279/297 RPM Range: 2000 to 5800 Intake/Exhaust Lift: .479/.465

[@blackvan84]

nice stock cam ( lol ) what size is it sounds great and mean too

[@aikencamaron1]

MUSIC TO MY EARS;)

[@splash5974]

Custom factory paint, all stock, and driven by a little old lady to church on Sundays!

[@ProTruck87]

Like the truck bro. Looks similar to mine except my motor is still stock lol. Hey do the rear tires rub any being that low? I did my drop the same but i was wanting to know before i spent the money on new tires.

[@johnnywrench9669]

There is no blower, don't be fooled it's an aircatcher. Also it probably has a stock motor with way to big of a Cam etc but it is still cool and clean

[@DammitLeroy]

How did you get the one peice window in the back i have the rear sliding one...i want the one you have just one peice haha.

[@ricardocruzjr2538]

What Cam are you Running?

[@cfhchevy]

Sounds Bad Ass!!

[@MrHighFlyer45]

When he said stock I'm sure he meant the factory block

[@ColbysHotRods]

about 2 foot of straight pipe commin off the headers

[@laurensiemens1436]

Is that carburetor or fuel injection. If carbed then what type of carb

[@Babeandme1996]

How much was it to restore the engine ?

[@caseyshepherd4436]

Can I get that factory paint on another 85 if I come across one?

[@wadedonaldson8049]

if all stock trucks sound like that damn cause mine don't I don't know where mine came from then lol

[@yogijimi101]

God DAMN that truck sounds mean as fuck and looks like it could have been owned by the devil himself hahah

[@RyanLorenzo454]

sick

[@ColbysHotRods]

open headers with about 2 feet of straight pipe

[@uptonfg]

sweet truck..some pro stars would look killer...the wagon wheels dont go with the rest of the truck..

[@82Painter]

what kind of exhaust you got on that?

[@michaeljames1120]

Which thumper cam is that?

[@Fewstanator]

fuck thats nice, are these trucks and parts hard to find, i wanna build one in the future my dad had one and i love em

[@RcbasherNcrasher13]

lol @factory motor.....they dont come with cams....but ya its a nice looking truck

[@jonnylong17]

How much did you drop the suspension?

[@optimusomega]

nice

[@darrellsmallwood8111]

Did u eat paint chips when u were a kid.......?

[@ColbysHotRods]

yeah, lol

[@chevyman174]

Custom paint, blower, cam full exhaust. No where near stock, still one bad bitch tho.

[@elprogramadelmaster]

ke alteracion trae , what stroken it is ,

[@HiMinds]

does anybody know how much it would cost to get a new automatic transmission for a 1985 k10?

[@ColbysHotRods]

@flaxbvlad5150 I flipped the rearend, it cost me $6 for spring pads. And i cut the front springs. $Free$

[@nateyoung9628]

what size wheels and tires are those

[@hownychea]

dam thats purty

[@EricCole69]

lmfao, "stock motor", sounds good buddy

[@racinhale14]

how much is it lowered