1989 GMC Vandura 2500 Fuel Injector Replacement

How to remove and replace fuel injectors on a 5.7L throttle body injection system.

[@boxchevydame]

Great cool video 📸 you explained it well thanks if I'm having white smoke from my muffler Will this help resolve?

[@lizardjump995]

Over fueling usually causes black smoke. White smoke is often a moisture issue. Any loss of coolant lately?

[@veygazgurl]

Thank you this is exactly what i needed

[@lizardjump995]

Always glad to hear it helped!

[@undergroundsoldiernightvis491]

Thanks my brother thumbs up I got a 1990 and I want to keep her running thanks again

[@lizardjump995]

Yeah, those old Vanduras are practically bulletproof! Thanks for the comment!

[@AmusedDaffodils-mz5rw]

Is this is what leaks gas

[@briizcustoms9543]

Please help! I’ve got a 1976 Chevy Itasca on a p20 chasis. I can not find out what the green wire is. After I got a new alternator put it my clusters all spin crazily. Any advice? They ALL spin besides the battery gage. I’ve gotten it looked at by many mechanics and the wiring is fine they say it’s the cluster panel itself but I just struggle to understand that as it was working perfectly fine before the new alternator!

[@lizardjump995]

I’m not sure exactly what green wire you’re talking about but I would disconnect it and see if everything still goes crazy. If i could see the wire and where it connected it would make more sense to me. It almost sounds like a ground issue to me.

[@briizcustoms9543]

@@lizardjump995 Do you have social media where I can send you pictures?

[@derekferova6619]

I have a 90 Vandura and me and my son are trying to replace the fuel pump, any tips would be greatly appreciated

[@lizardjump995]

Sorry for the late reply but you’ll have to remove the fuel tank to replace the pump.

[@nickploszay2310]

There are two more screws on the bottom of the plastic cover. It will be much easier to remove the dog house with all four screws out. Move both seats as far backwards as possible put the dog house out on the lip of the floor and tilt the top up towards the windshield it slips right out.

[@lizardjump995]

Thank you for adding this comment! Thanks for watching!

[@RW-bt6ex]

I have a 92 Vandura 4.3 , same FI set up . Thanks very helpful .

[@lizardjump995]

Glad to hear it was beneficial! Thanks for the comment!

[@yashuwasaves4851]

On top of the injectors what's the white round rubber piece will gas come out from it I think that's were mine is liking can I put something on top of it like jbwield or something then titein it down sorry for the spelling In a hurry on this one

[@lizardjump995]

Not exactly sure what you’re referring to. The only rubber piece I know of is the O ring that seals the injectors. If you take a picture of it would be more helpful. Thanks

[@luiscastillo7481]

Me pudieran ayudar Dejo de funcionar el sofa cama de mi vandura explorer 1991 Si me pudieran decir cual es el fusible que controla los controles

[@Anth4044]

Thank you for sharing 👍👍

[@lizardjump995]

You’re welcome! Thanks for watching and commenting!

[@bretmartinez2832]

Good video

[@lizardjump995]

Thank you!

[@kris7g]

Thank you for the instructional video. Your awesome. I guess up in the north "PEACANS" grow in vans? ;)

[@lizardjump995]

Lol! Thanks for watching!

[@Stratocastering]

Amazing!