1991 Mitsubishi Delica L300 - 2" Lift Kit

I installed a 2" Lift Kit!
Part Numbers:
Front shocks: Procomp 915510
Rear shocks: Procomp 921520
Lower Leaf Spring Bushings: Need (4) MB584530
Upper Leaf Spring Bushings: Need (4) MB584531
Lift Kit Website: www.delicaliftkits.com/produc...
The above business was quick to respond with questions and their instructional set was easy to follow!
Here are the threads I referenced during the install:
delicaforum.com/index.php?thre...
www.delicaclub.com/viewtopic.p...
Note: The above thread at delicaclub is a warning before attempting to bleed your brakes. I followed the warning.
Forums for more information, they've helped me out a ton!:
delicaforum.com/
delica.ca/
www.mdocuk.co.uk/forums/
www.delicaclub.com/index.php
Just a heads up, I had some problems finding someone to do a alignment on my vehicle. A bunch of shops stated they wouldn't touch the delica because it wasn't in their alignment machine. Even Mitsubishi wouldn't touch it. A local shop I trusted ended up doing the alignment as best they can. After calling a bunch of shops, I eventually found one nearby that had a p35w rhd in their alignment system! I will be going to them after my suspension settles out a bit more.
I am in progress of doing a video on replacing the front sway bar bushings. I ended up breaking some brackets and had to order more parts. I will post this as soon as I'm finished!
Thanks again for watching! Don't forget to subscribe! Don't hesitate to ask any questions!

[@bluegoose6913]

I owe you a 12 pack of your favorite beer.

[@thehcorps]

Thank you for the info of the spare parts of your delica, really helps! 🤙🇵🇭

[@spiritrider3348]

Great work and info, it looks awesome!

[@kirrashaanz9563]

kzbin.info/www/bejne/bJmulamCiLGNldE #delica

[@Truck-kun__.....619]

My uncle wants to lift his delica. This is so informational, gonna recommend this to him later.

[@vanderbosch478]

Awesome! Hope everything goes smoothly!!

[@skregina]

Thanks for the great info, do you think the same shock models would work for a 3 inch lift kit?

[@michaeldominesey5160]

is it possible to post a link or the PDF. The website that sells the kits is offline. some directions to install would be helpful

[@ArjPanoor]

Did you ever figure out what that extra bleed screw was for/did that ever act up not getting anything out?

[@603dstetser]

This is incredibly helpful

[@liamwaldie2306]

Hey, I am parting out a lift kit because I hate myself. So far, I have the extended shackles and BJ spacers. I understand I will need a longer brakeline, shocks, and from your video, the balljoint grease fittings, that should be it right? Do you have a part number for those fittings?

[@ubaldocruz1348]

Hi could you please give me the part number of front/rear procomp shocks. Thanks in advance.

[@VanaConn]

Invest in a flare nut wrench set for brake lines.

[@sefisredtv8991]

Hey im just getting my feet wet from these kind of stuff. Its possible to fit any shock ang leaves right? I mean i want one of them ironman foamcells and 100kg leaves and i can prolly fit them with a few mods.

[@vincejosephuy8739]

Hi vanderbosch! absolutely love your videos! I own a delica l300 as well. Was wondering where you got your service manual? I'm having a hard time looking for one. Cheers from the Philippines! thank you

[@vanderbosch478]

Search DelicaForum service manuals, people have posted the full PDF service manuals! I've saved them all on my computer for reference!

[@vincejosephuy8739]

@@vanderbosch478 thanks man!

[@AlexAlex-cr1kd]

Great car

[@P25CUSTOM]

I was riding the Starwagon, which was up to 6 inches.

[@vanderbosch478]

Damn! I've seen some come from over the seas with insane lifts, haven't seen any on the market unfortunately :(

[@shuggyss]

Was there actually a difference in the shape/ size of the leaf bushings? Rock auto has one part number for both.

[@shuggyss]

Nevermind, helps if you actually listen to the video 🙄

[@honeyloopingaround1273]

Hi VanderBosch, me again! Thanks for sharing that. I want to do some underbody sealing work given the quarantine measures in place (and it seems like they will be for a while..). To get to the wheel arches I want to lift up the Delica. However, do you think just a jack on the axle will be enough for that purpose? I dont plan to do any technical maintenance whatsoever it would be just for this, it could help to minimize the costs of this venture you see ;).

[@vanderbosch478]

For safety reasons, I believe its good to have the support on each side just in case something tilts/slips. However, you could lift it up from the rear axle and see how stable everything is first before deciding on purchasing stands or not. Stands are good insurance that last forever, so I would personally recommend them. But in the end its your call!

[@DustyRobertson]

Never work under a car that is jacked up without stands. The risk of it coming down ontop of you is just too high

[@honeyloopingaround1273]

Hi guys, ok clear message! Thanks for your input. At least I know now the spots where to place the supporting stands, cheers. Timo

[@zoeycline7943]

I’m 6”4 and there isn’t a L300 high top around to test drive would I fit in this ? I’m thinking about getting it . A early to mid 90s one

[@vanderbosch478]

I'm pretty short so I don't think my opinion would be valuable. I'm about 5'6" and don't have any issue

[@SepticShrimp]

6'2" and there's defnitely a few inches above my head. Depends on torso to leg ratio I guess lol. Love my 93' Chamonix

[@user-ym7ix4sv4e]

👍

[@user-dy5wh4qv9z]

0:01冒頭、雪の林道を走行するシーン…当時の三菱デリカのカタログのワッンカットかプロモーションビデオに出て来そう😄

[@vanderbosch478]

Hahaha! It does look like a promotional video! It was a logging trail close to home after a nice snow storm!

[@user-ym7ix4sv4e]

🙋

[@user-dn4qt4yc2d]

Здравствуйте. Задние амортизаторы от какого авто?

[@vanderbosch478]

Procomp 921520

[@user-iy3po6ni7j]

Я на свою с 78 прадо передние ставил

[@user-dn4qt4yc2d]

@@user-iy3po6ni7j интересно. Видимо лифт кузова производили?

[@user-iy3po6ni7j]

@@user-dn4qt4yc2d поставил рессоры от хундай Грейс на тонну они пуля в пуля как родные только усиленные ну соответственно и жопа задралась пришлось ставить аморты с 78 прадо передние и удлинять тормозной шланг перёд кстати торсионы тоже с грейса пуля в пулю только шток толще усилиный выравнивал торсионами

[@zouhairmarge]

How much is this bride I want like her in Morocco

[@calumpalmer3296]

How does it handle with the lift? thank you

[@vanderbosch478]

I didn't see that much of a difference in how the van handled. I did have some issues finding someone that would align the vehicle. For some reason a lot of the shops locally didn't want to touch it.

[@cary1432]

I didn't have any fluid come out of that middle valve either.

[@vanderbosch478]

There definitely seems to be multiple layers of undercoating on my van, so maybe the undercoating was plugging it? Brakes haven't failed yet so I'll roll with it haha

[@randylgrep]

@@vanderbosch478 nice video. I'm not a delica owner, so I don't know much about these but figured I'd share my mechanical info which may be applicable here. That issue with the bleeder on the proportional valve is most easily remedied by back feeding into the system. Those long and narrow lines, are a bear to push air out. This method is easiest. Open the bleeder that's furthest from that one with a hose and a catch pan and feed it in through the bleeder near the proportional valve... should do the trick.

[@vanderbosch478]

@@randylgrep Thanks man! I was just happy that my breaks still worked haha I'll give that a try next time I'm under the van!

[@ratboyjersey]

Update in the delica. Sold it? We wont get mad

[@vanderbosch478]

Hahaha! I apologize! I have been busy with work and life and haven't done any work on the delica lately! She's still running and I've been just enjoying the drive! Hopefully I will start making videos again soon!

[@eduardonapolitano6721]

Hi vanderbosch, how are you? Dude, i'm from Brasil and here we call The delica as L300 and we do not have it 4x4. But either way i'm planning of buying one and lift it... whats is definetly not common here. Mostly of tese vans are used to take children tô school. So... if i wanna it, i'll have to search for parts abroad. Your vídeo was one of The Best vídeos about it, and would like to check with you how much did you expend buying the lift kit and whatever parts were needed. If you can help me in this Journey i'd grateful. Cheers Edu

[@garthpaul6216]

Delica is also called L400

[@santrivlogger1136]

Hey, is there a l300 parts there, I want a turbo l300, I'm from Indonesia, a l300 car here has no turbo, I also have a youtube channel about l300, it's called Nizam Jail

[@vanderbosch478]

Unfortunately I don't have direct access to parts. I've heard of some people ordering new Hyundai engines that are basically the same as the 4d56t turbo engine in the delica. I'd go to delicaforum. Some people are doing group buys, maybe it would help to see how they are ordering the engines.

[@santrivlogger1136]

can I have the WA number?

[@vanderbosch478]

@@santrivlogger1136 I don't know what the WA number is. But the new crate engine is a Hyundai D4BF

[@santrivlogger1136]

kzbin.info/door/xxsaX_AntwWp6uSEdMAoug

[@user-yf2xz1cr4w]

привет. я тоже счастливый владелец такой машины. но она немножко отличается :) kzbin.info/www/bejne/npjZnaGfmLplqNk

[@user-ym7ix4sv4e]

На русском языке бы ещё объяснил

[@aleksignatew2715]

Что тебя интересует?