1992 7.3 IDI Performance turbo update/overview

[@southhillfarm2795]

I'm Impressed. The truck looks great and seems to run great. I would personally change the front seats to captains seats for comfort. This truck is a keeper. Proves you can make an old beast new again.

[@Grewsum2Sum]

Lol I have some captain's chairs in my shed for her just havent gotten around to doing it yst

[@coalblooded303]

@Grewsum2Sum man . I need some of them. I got bench seats in both. And it sucks. I would love some captins' chairs

[@peanutbutterandjammy]

Dude awesome job converting the ceiling fan dome into a steering column cover! I love that ingenuity!

[@Grewsum2Sum]

Thanks! Hot rodding at its finest ya know?

[@Austinsairplanes]

Definitely convert the rear 18 gallon tank to the 38 gallon tank. I can get 700+ miles range with it.

[@Austinsairplanes]

@@jeffreyhodge3303 it's only an extra 19 gallons which comes out to 133 lbs.... These trucks already weigh between 8 to 9000 lbs a little extra fuel isn't going to make any noticeable difference.

[@dknifeworks3449]

austin h it’s like having an extra person that’s not much

[@RiggyRonnie]

Lol 7.3s aren't known for being efficient on fuel. A 12 valve literally gets double the fuel mileage even while making double the power. Trust me. I own a 2001 7.3 and a 1995 12v Cummins. I dailied the Cummins for a year and recently got the newer 7.3. My Cummins is base trimmed and the 7.3 is Lariat with a much of nice ad ons. People think I like the 7.3 better I'm like nah man the rest of the truck yeah but that cummins was the best engine I ever owned. Just the rest of the truck was falling apart around it.

[@timesthree5757]

@@RiggyRonnie What are you talking about. My 89 IDI is great on fuel. About 18MPG fully loaded I get 21MPG. I love my truck.

[@RiggyRonnie]

@@timesthree5757 What when its idling? Show me your calculations the 89 models don't have mpg readings. My 2001 lifted 4x4 black lariat crew cab short bed f250 7.3 I.D.I only has 128k miles and I drive 60 miles round trip to and from work every. Day. I live in Weatherford and I work at Arlington. Its 25 bucks of fuel per trip. Every. Day. That's insane. I used to make the same trip on my 12 valve, and it's a dually by the way. It doesnt matter if it had cargo or not. Every 2 days I'd have to put 20 in. It's like 2.50 per gallon where I live. The 12v was my first diesel, so like any teen I modded it. A lot. Too much by the way which is why I had to get a stock 7.3. Super slow. I don't love any of my trucks. My trucks mean nothing to me. They're work hogs and investments. Im giving a realistic point of view. I'm not bias I've actually driven both for a long time.

[@johnnydrama8709]

Loving the interior. These trucks run for a life time. I love the square body fords. These things were built to last.

[@centraltexasfoxbodies]

Also if you're swapping out the rear tank do the 38 gallon rear tank, I put one in my 94 and I can go forever between the 2 tanks.

[@Austinsairplanes]

I did the the same with my 1993 f250 7.3. The extra range you get with the 38 gallon rear tank is awesome!

[@DubstepMagiic]

damn! my lil 1990 ford f150 only has 31 gallons combined between the two tanks but i do love having the two tanks

[@beprepared1278]

About the gas tank, I just bought an OBS Ford F250 1991 and it's missing the front tank. Since I'm shopping for the front tank I might as well increase the size of the rear tank. I don't have much money right now so if you would send me a link to were you purchased yours and how difficult is the install? Please and thank you

[@GrimRepair]

Where do we get this tank

[@centraltexasfoxbodies]

@@GrimRepair got mine off of ebay, it's a spectra fuel tank it was less than $150 shipped and fit like a charm and worked great, gotta extend the pickup tube and build an arm for the fuel level sender.

[@dieselwrench3621]

Came across this video searching some IDI stuff, and I have to say, I’m jealous. That’s one beautiful truck. Also those saddle blanket seat covers set off that old school feel. 👍

[@poa8946150]

Awesome truck!! The idi's always been my fave. Loved watching the build!

[@danstennis1817]

What a great truck. I had a 93 IDI 4x4 and it was the best truck I ever owned.

[@dandable]

Awesome, unique rig. Nice to see some east coast folks getting their hands dirty keeping these old truck's alive.

[@jamesworkman686]

Finally some obs content I subscribed to this channel because of this truck lol

[@Grewsum2Sum]

There will be more dont you worry

[@jamesworkman686]

@@Grewsum2Sum ready to see the bullnose get the 7.3 transplant

[@Grewsum2Sum]

@@jamesworkman686 shes getting a 12v...sooner or later

[@evankc761]

Grewsum 2sum silly question Would have rather done all the stuff you did to the idi motor or put a 12v in the centurion?

[@Grewsum2Sum]

That's a hard question really hard.... I wanted to be different so I did it... but having that easy power would be great

[@waynegouin939]

Hi. I love your truck. Deisel, yeah. Ford, hell yeah!

[@lyndentinkerer9914]

Great video! I've always put 260mm MOMO suede wheels (very small) with NRG quick release adapters on all my vehicles, including my IDI and 94 PSD! Great to see someone else who's put an 'unusual' steering wheel on their truck (ie: I've never seen someone else who has done this)! I love it! Also, the shifter is great! I had one like that on my ZF5, but changed it to one that was shorter than stock, and bent way back...... feels completely different (for a change)..... as you mention in the video, you can change the shifter whenever you feel like it. Great truck - thanks for sharing!

[@Grewsum2Sum]

Thanks! I really feel like changing steering wheel is a must in all our vehicles. We that's that's when it really becomes "mine"

[@timbenefield5197]

I’ve had 6 or 7 idi’s in the past… my favorite ford, love them…

[@michaelbenoit248]

That’s such a sweet truck. As an owner of a 1st gen 7.3 Powerstroke I wished I had an idi because it’s all mechanical and no sensors to deal with, like my 7.3. But other than that I’ve loved the truck. And I’m 16 so I kinda wanted a truck but God made it happen and we got it for a steal. She’s my baby. She loves me and I love her.

[@Grewsum2Sum]

Each have their strengths and weaknesses once you learn how to diagnose a powerstroke, they are pretty simple to deal with

[@michaelbenoit248]

True. I’ve done a lot to my truck to, like better seats, train horn, front and back led light bars(2* 3” & 2* 6”), fresher carpet, a PA system on Amazon for $30 and a backup beeper. It’s been a fun build and I’ve enjoyed it. I wish I had the ZF-5 instead of the E4OD, but then again the auto is easier to live with, but then again I’m not going long distance with it either that often. I’ve also replaced all my sensors in the engine compartment and the IPR, and it runs like a top with the fuel additive.

[@StrifeWolfe]

Loved stumbling across this video. I have an 85 Centurion F250. Its a big red, rusty beast, but super cab and the HD package with a locker Dana 70 out back makes for a pretty stout truck. I just finished swapping over to a NA 7.3 IDI from a 93 E350, due to the old 6.9 being seized up solid when I bought it. I'm still working through some fueling issues, and planning to go to an electric pump setup soon. But ditching the 4.10 gears for 3.55s are a goal and so is a ZF-5 swap. Eventually she'll be a good truck again. But there's still a lot of work left to go.

[@DuaneHallgren]

Love the truck, just swapped on an ats 088 kit on my '89 7.3 with a zf5, not as cool as this but at least it makes turbo noises now lol.

[@terrygriffith7907]

i have a 1993 ford f 350 crew cab 4x4 7.3 idi non turbo automatic engine is 100% stock it runs great and i love it i like the 7.3 idi great engine

[@SmoothRuffian]

@terry I just bought the same truck. I wish I knew exactly what the truck is supposed to sound/feel like. The motor seems money at 250K miles. But the trans (E40D) I'm not sure about. 3rd gear seems to slip. I guess my question is during takeoff and first and second gear does that engine get pretty loud for you too? Compared to the engine sound at idle of course.

[@Grewsum2Sum]

I really can't help you, our truck is a manual, it get louder obviously as the rpms increase

[@gregj.gotham4402]

Very clean on the inside I’d say that’s a great truck, love that shifter. Yeah I have ape hangers on both of my Harley’s.

[@Grewsum2Sum]

Finally someone who gets it lol

[@snoopytheace4487]

I'd love to get one of these. They are getting harder and harder to find. Especially since people love ripping all the body kits off and doing God awful Cummins swap.

[@TroydaBoy6160]

Just picked up one for 2500$ from my buddy 87 crew 6.9 dually. Didnt realize how lucky i got until recently. Things beyond clean with 105k original

[@snoopytheace4487]

@@TroydaBoy6160 dang I am jealous. I've seen a couple pop up for sale. Once every 6 months or so. Just haven't had the money to. Uy another old truck.

[@crewdawg2008]

Yeah, I tend to feel it's a little counterproductive to swap out a 7.3 with a cummins. Nothing against the cummins, I could absolutely see swapping a busted 6.0 with a much more reliable 5.9 12 or 24 valve, but the 7.3 was a very reliable engine in it's own right and, in my opinion, deserves to have some love. Edit: and I just realized how old this thread is, so sorry for dredging that back up.

[@snoopytheace4487]

@@crewdawg2008 ya. I have nothing against the old cummins as well. Definitely better than any cummins nowadays. But they are way overused and overhyped. The owners are also not the brightest of people.

[@stevendaniels8652]

I love people who ate creative and frugal.

[@thereelangler2391]

Nothing beats a Porno Red FoMoCo interior.

[@Grewsum2Sum]

I'm slowly getting used to her lol

[@Emacspirate]

What a great build! Super great find, and yeah I would be a little leary of a amazing CL find from Newark lol. Hatters gonna hate, the ape hanger shifter is pure style.

[@marks7352]

I came on here because I'm going to be redoing my truck this year... I like the Centurion models, mine isn't one.

[@jambatcnh32050]

Please park this beautiful truck for winter before roads salted and eat it up! Its too nice

[@christianobrien4465]

Yo... This is like Giovanni ribisi doing a truck video it's awesome great job guy

[@Grewsum2Sum]

Hahahaha thanks my guy

[@colton7373]

I like that single cab super duty

[@Grewsum2Sum]

Yea us too those single cab 6.7s are hard to come by

[@colton7373]

Grewsum 2Sum is it y’all’s truck? You should make a video on it some day even though it looks mostly stock

[@Grewsum2Sum]

@@colton7373 yes it is! We plan on it within next week or two! Just an overview of the problems of owning a new garbage pile and our trials trying to fix it because fuck the warranty 😂😂

[@darjohnsom9368]

i love that truck been looking for one, i have a 77 f-350 4 door long box and i love it

[@Grewsum2Sum]

Throw a idi in it!

[@darjohnsom9368]

it has a decent 460 in it neighbor has a idi but maybe pooched depends what he may want for it

[@jeff.3.2.12]

Love the ape shifter, I did that to my ZF6 Super Duty with a short throw tower. Well worth it and set to my liking.

[@greenlantern7537]

Loving it

[@sabbath7081]

I had a stock 91 f250 7.3 with a 5-speed extended cab 8 ft bed it would go 65 mph at 2,200 RPMs. I owned it from 2001 to 2007 I really miss it it just rotted out being a northwestern Massachusetts to a Connecticut truck where I owned it.

[@jeffflanagan2814]

Love the video fellas! Look forward to any idi stuff you do! I have a 93 F Superduty 7.3 idi NA with a Jerr-Dan 19' aluminum rollback on it with 5.13 gears. It hardly gets out of it's own way! I traded a 450r quad for a 94 f350 dually turbo idi with 85k on it, bout to swap the whole works in. Where did you buy your rear gear set from?

[@gromit848]

Y'all have the best music in your videos 👌

[@Grewsum2Sum]

Thanks! Just trying to be different than every other KZbinr with the edm stuff and the rock music gotta keep it different ya know? Lol

[@gromit848]

@@Grewsum2Sum whenever I get home I'm going to start my 7.3 idi project. I'm planning to do a performance build 7.3 idi with a zf5 trans and drop it in a 1970's supeecab f250 or crewcab f350 4x4 of course.

[@Grewsum2Sum]

@@gromit848 wickeddd

[@martyk1156]

I always find it amazing that people add an intercooler to lower intake temps but put a k&n air filter on drawing hot air from the engine bay. Plumb the air intake in front of the radiator and you will see a 100° drop in intake temp when working the truck.

[@nativeoutdoors1780]

It's really not gonna drop it 100 since it would stick have to take the air into the engine bay anyway

[@martyk1156]

@@nativeoutdoors1780 the velocity of the air through the intake system is to fast for a measurable heat transfer through the intake tube. There will be a temp rise after the turbo compresses it but that would be proportional to ambient air temperature at the point of intake. So the difference would still be outside temperature compared to engine bay temperature heated by big radiator that has 220° coolant in it when the truck is being worked.

[@nativeoutdoors1780]

@@martyk1156 yeah and the factory intake on most vehicle is right next to the radiator 🤦 But seriously though, idk how much difference it makes, I prefer oem style intakes because I worry more about protecting my intake from particulates rather than plus 1 hp but I would like to know just how much of a difference it makes

[@martyk1156]

@@nativeoutdoors1780 my experience while monitoring with a scan tool on gas motors is that the ambient air temp sensor with factory style air induction reads close to the actual temperature reported by the weather. In a fully warmed up car at idle not being worked it with a k&n filter set up its about a 60° rise above outside temp. I can only imagine it going up closer to the air temperature after the radiator when under load.

[@honestguy7764]

Thats a nice truck for sure! Only thing I hate is the shifter level, that can be lethal y case of collision. The native pattern of the upholstery is quite nice too. Shame we cant have more of this here in Europe.

[@jessetaylor6386]

just a little tip my 93 did it too the clutch squwak. lay down in the floor and you will see a spring that connects to your clutch pedal under the dash should be gold. spray white lithium dry grease on it and you wont hear the squeak anymore i put grease on everything then wiped off the extra and 6 months later not a peep out of it

[@Grewsum2Sum]

Hahahaha thanks for reminding me I've been lazy

[@DStabs720]

Did the same with my Accord a few months ago. Works like a charm!

[@DEJAVU4X4]

Nice truck am from Newark nj but i have move too south Jerseys and am in too jeeps ...

[@jamesmcnamara7484]

I totally dig it. What side mirrors are you running? Been thinking about putting flags on mine they flap in the breeze so much.

[@ayjay6577]

It was the ape hanger reference that got my like and sub. Someone can relate lol

[@zackzander425]

Truck looks awesome.

[@rangerman0033]

Truck looks awesome

[@PeterHatch-mx7zc]

I do like the front bumper just got a 19934x4 f250 diesel excab flat bed beds not staying needs new cab any way i like yours

[@adamgreen1295]

Nice truck but how do you tow if you don’t have a fifth wheel or gooseneck and you took you’re ball hitch off

[@Grewsum2Sum]

Havent towed with it yet sadly the clutch I put in can barely handle the power so I took my rear hitch off so I would be tempted to tow anything until I get a better clutch lol

[@chuckfowler4754]

Love the build. Got similar truck with the factory turbo idi. Have you towed with the 3.73s?

[@Grewsum2Sum]

There 3.55s and no I havent I need to put a better clutch in before I tow sadly it slips every so often under full boost

[@3374jj]

Good looking truck man.

[@surakasoulemana9425]

I just got myself 88 f-350 centurion xlt lariat and I live in NYC can I get info on where you got your motor rebuilt?

[@SOU6900]

Wish my 95 F350 Dually with the 7.3 Powerstroke looked that good. Would like an idi 7.3 with a manual myself, but right now if I found one I'd have to walk away with diesel costing up to $4.59 where I'm I at.

[@81eagle]

Very clean looking truck!

[@BIGTAZ351]

I put a ranch hand bumper/guard on my 2008 F250... I was shocked that the "Factory Bumper" weighs nothing...I literally picked it up with my pinky finger thru the fog light hole...

[@clayster89]

What a beauty!

[@Grewsum2Sum]

Thanks!

[@urdaddy9094]

My dad owns one of these trucks but we are having problems with the shift levers, it’s so difficult to put it on reverse and so difficult to change from first gear to second...

[@xPikkupstix]

Dream Truck! Subbed.

[@megandalessandro4290]

All hail the Craigslist King

[@Samuel-zl7yw]

I'm wondering what does the centurion package add to this truck? Is it a nicer interior and paint patterns?

[@nunninkav]

These were geared for 55mph speed limit, I have a 92. I am going to a ZF6, to do it I need to put in a body lift. It still has the stock E4OD which is HORRIBLE.

[@Ogdenjor08]

What are you feeding your IP with? Still running a mechanical lift or did you have to upgrade the lift pump to feed the bigger IP? Couldn't recall if you had mentioned that in the video. Sweet rig, thanks.

[@Grewsum2Sum]

Stock mechanical pump, in higher rpms you can tell its losing pressure though, I'm probably gunna go to a electric lift pump when I re do the whole fuel system

[@truckerbaty7425]

I just bought an idi, and I found your channel. Pretty cool channel, what are your horsepower and torque numbers?

[@Grewsum2Sum]

If you go to our page there is a dyno vid!

[@roosterkilledyougmg1498]

Is 300k miles alot on these trucks I found a 92 but don't know if I wanna get it cause of the mileage

[@TheUnsureFox]

I LOVE this truck! Edit: What kind of mileage are you pulling out of that IDI?

[@Grewsum2Sum]

13-18mpg depending if I'm being nice to the throttle or not lol

[@UnderSprayedWhiteSkies]

I get the functionality/ergonomic aspect of the shifter, but IMO the hideous factor overrides the benefits.

[@Trumptrain2024Vance]

Very nice rig

[@totallynotawerewolf2936]

I haul an 17000lb horse trailer no problem with mine

[@Grewsum2Sum]

I wish could say the same.... as soon as it hits 20lbs of boost with any extra weight in her, she starts slipping the clutch

[@letsfixit89]

That is a sharp truck

[@johnnyohness6610]

On many IDI's the oil pressure fluctuates from low to center When I got mine a few weeks ago I really worried about it. It appears yours seems to stay at 6:00 . Did you change the sending unit? Just wondering. Also when you changed your steering wheel did you lose your cruise control?

[@Grewsum2Sum]

Yes we changed the sending unit, also yea lost cruise control

[@dustinmoore2565]

That ain’t stupid I would have done the same thing instead of a short shifter 😁

[@kristkristofferson5540]

Nice video 👍 good job

[@dustinmoore2565]

Diesel trucks all the way baby 😁😁😁😁😁

[@GaryGang911]

I have a 96 F-350 Centurion.

[@eddiesfishden3577]

I like how you have an 80 to 86 bullnose tailgate

[@Grewsum2Sum]

Yea it looks so much better, did a lot of modifications to get it on there but it works now and I love it

[@headlesnorseman701]

Are you guys from NJ? I’m at the shore. No more good off-roading down here lol

[@Grewsum2Sum]

Yes, sarco is done sadly but we have a few more spots down there;)

[@chrishow22]

bad ass!!!

[@honestguy7764]

Hey! always buckle up!

[@ddjohnson9717]

mans got a long stroke shifter lmao. That shift nob travel gotta be 1 foot long

[@Grewsum2Sum]

Lol easily if not more

[@brandonruhl4525]

Should por15 the frame and then get the hood and bumper repainted to match the rest of the truck!

[@Grewsum2Sum]

Hood matches bumper I kinda like chrome, I por 15d half of it when I did the engine lol

[@brandonruhl4525]

Grewsum 2Sum Haha if you like it that’s what truly matters man. Love the truck

[@007.3l]

Is that the parking garage at the mall of America

[@Grewsum2Sum]

Lol no garden state plaza

[@craiganderson1959]

I have a 93 non turbo IDI. I would love to have a shop do the motor mods, as I am not a mechanic. In Beaufort, SC, any body point me in a direction?

[@unapologeticallypatriotic3853]

Those squared off diff covers dont allow the proper amount of gear oil to the axel tubes or bearings. Watch Banks power's video on diff covers. They dont have one of their ram air covers for Ford yet so factory is better imo until banks gets one for us super duty guys.

[@motersickel]

I was going to comment the same thing.. very true, I watched those videos....

[@elijahcavin2408]

Can you add any power without a turbo? Exhaust, fuel, timing advance?

[@Grewsum2Sum]

No sadly

[@moral507ed]

What did you do with the blow by gases??

[@Grewsum2Sum]

Road draft tube

[@gazilla25]

you guys from nnj? i spotted the gsp haha

[@Grewsum2Sum]

Yep we are lol

[@GorillaCookies]

That shifter just makes the throw longer . But whatever its your truck

[@Grewsum2Sum]

I like it, why would you need a short shifter in a land yacht

[@Thebroncobillshow]

Nice...

[@joeldelorme1382]

What size intercooler did you get for the truck

[@Grewsum2Sum]

Mishimoto universal 3 inch

[@donaldwhitlockjr2198]

i would have got me fuller 10 speed road ranger with the spilter on the the shifter

[@BrandonS55]

I’d r&d still a thing? Nothing on their website is in stock

[@Grewsum2Sum]

Yes call em

[@willmorris2273]

About how much money do you guys have into the engine? I want to build mine similar

[@Grewsum2Sum]

About 10k....

[@willmorris2273]

Grewsum 2Sum ehhh i believe I’ll stick to the cummins swap

[@Grewsum2Sum]

@@willmorris2273 completely understand I just wanted to be different lol

[@hunterbaier2059]

How much do you have into building your motor? I’ve got a 1990 n/a 7.3 and I wanna go above and beyond on it. I was thinking twin turbos but I think a turbo like yours would do the job just fine

[@Grewsum2Sum]

10k including machine work and parts

[@hunterbaier2059]

@@Grewsum2Sum if y'all weren't so far away from me I would probably try to convince you to let me come check it out lol.

[@Grewsum2Sum]

@@hunterbaier2059 no convincing come check it out lol

[@hunterbaier2059]

@@Grewsum2Sum I totally would, but I live in northwest Montana, that's a bit of a drive, and I dont think my idi would make it lol

[@hunterbaier2059]

@@Grewsum2Sum is there anyway I can get in touch with you guys on a personal platform? I've got some questions for ya

[@selador11]

Steering wheel "dome". Is that a cereal bowl? =0)

[@selador11]

Ok, ceiling fan part. Just as good!! Love it!

[@Grewsum2Sum]

@@selador11 if it fits it ships hahahahaha

[@josegalindo9508]

Is good truck, how mouch the price

[@Grewsum2Sum]

I bought it for $5000 4 years ago

[@user-lr3di2gp7o]

How much pounds can you haul with this truck ?

[@Grewsum2Sum]

Probably can handle 20000lbs no problem

[@Cherokee93]

Fucking mint man

[@ajshelton3201]

Hey man I would love to have a truck like that one

[@ajshelton3201]

Let me know on chat if you ever sell it

[@ajshelton3201]

Ive been looking for a diesel truck to have it modified into a mini semi for work

[@SharpElement]

Is that shifter also a rain stick

[@Grewsum2Sum]

Hahahaha no that's hilarious though

[@RRRRR7-c7r]

Look at the banks youtube vids on how those rear end covers with more capacity actually does harm to your rear end.

[@Grewsum2Sum]

Saw that before I even put it on thanks.

[@TanNguyen-vo9nz]

I have my truck 1993 Ford f350 diesel dually turbo,how can I make the turbo a better sounds

[@Grewsum2Sum]

I'm sorry I dont have a stock turbo setup I would know

[@TanNguyen-vo9nz]

Thankyou for your response

[@Grewsum2Sum]

@@TanNguyen-vo9nz R&D idiperformance.com sells a drop in turbo that apparently sound really good

[@williamgerow811]

Thought IDI had such high compression that you couldn't have more then like 10 pounds of boost on it?

[@Grewsum2Sum]

Gotta stud it and your good

[@williamgerow811]

@@Grewsum2Sum never knew that. Most videos I watched said to stay away from the IDI due to that. Definitely an underrated platform for diesels, and the cheapest for sale around me. L ol l

[@daltonbrown785]

@@Grewsum2Sum know what diameter your shifter rod is ? I’m looking to make my own and wanted an about size to start looking for to make a shifter … I got a blue moon beer tap on my idi now but it’s too close to the steering wheel in 1st so gotta get something made up soon

[@Grewsum2Sum]

@Dalton Brown i dont know i wanna say 3/8 but im not certain

[@Grewsum2Sum]

@Dalton Brown i made a mistake i meant to put 5/8

[@jeffleblanc8850]

Cool truck although I prefer a dodge don’t care for them big shifters looks uncomfortable to shift I like laying my hand comfortable laying on the shifter I had a Harley don’t like ape hangers either I like drag bars we are all different

[@gassnerfarms]

For sale ?

[@briansfixinstuff]

what system is your turbo mounted to? a bank system?

[@Grewsum2Sum]

R&D idi turbo manifold system

[@briansfixinstuff]

@@Grewsum2Sum sweet i have his cam injectors and 90 pump on mine

[@haydenchamberlain168]

What’s the song

[@Danimaljmartin]

Love the shifter