1994 Honda Civic Check Engine Light Code Retrieval Tutorial

The easiest way to retrieve the check engine error code for a Honda Civic between the years of 1992-1995 (The car in the video is a 1994). With the use of a paper clip and a close eye on the gauge cluster you will be able to find out what check engine code your vehicle has, so you can pinpoint the problem quickly.
Get Social with UrbanSleepers:
Facebook: / urbansleepersofficial
Instagram: / urbansleepers
Twitter: / urbansleepers
Thank you for watching!
Please Rate, Comment, and Subscribe!
__________________________________
Disclaimer:
***The videos on this channel are created to aid in maintaining and repairing your vehicles, as well as for entertainment purposes. Please use these videos as guides to repair and upgrade your vehicles. Using this resource is at your own risk and UrbanSleepers Official does not become responsible for any mishaps that may arise from watching these videos.

[@jukeboxzero1]

you might want to check the back up fuse in the engine compartment fuse box first. my '93 DX got its first check engine light at ~ 180,000 miles. the check engine light did not flash when i jumpered the connector as shown in the video but replacing the blown fuse resolved the problem (the check engine light did not come back on when driving). also, remove the glovebox to access the connector. mine was to the right of the glovebox. there was a green rubber cover over two blue connectors, one with two wires and another with three wires. in order to access the two-wire connector i had to cut the lanyard that held the rubber cover to a bundle of wires covered in black plastic wire conduit. then carefully pry the two wire connector out so you can access the pins from the front.

[@UrbanSleepersOfficial]

Thank you for your feedback, I'm sure it'll be helpful for some people looking for those two connectors.

[@deonwatkins102]

Yu Tube checked the fuse and still won't flash. just hold s the check engine light.

[@poppasden7672]

What back up fuse did you check

[@X_BongVouage420_X]

Got a 93 EX doing the same thing your comment helped 👍

[@UrbanSleepersOfficial]

If you keep looking in that area where the connection should be, you should be able to find it. There are sometimes two connections: one with 3 ports and one with 2 ports. I might be tangled up in there or just out of site. That's how mine is, it has both connections, but I just pushed the 3 port connection out of the way to have the 2 port connection always available.

[@DesRainOG]

Awesome! Thank you! I have been looking for that connector for 2 days!

[@manoalopez6986]

Man you lucky only 2 ive been for weeks

[@epicnate2109]

Same😂😂

[@ricardosom7766]

Let me ask you, what would the code be? When I got 3 fast blinks and 1 long one? Thank you. I understood 310 or 13 but can’t find any of those.

[@kermitzoe7011]

Likely two separate codes, code 3 and then code 10.

[@UrbanSleepersOfficial]

It's quite simple with the paperclip trick! I've heard of there being adapters where you can connect OBD2 scanners in OBD1 vehicles, but I'm not too sure if Honda has them.

[@nelsoncaballero1937]

Thanks a lot for posting. I was able to fix my friends car for Free.

[@UrbanSleepersOfficial]

I'm glad the video was able to help out! Nothing better than free repairs!

[@UrbanSleepersOfficial]

Great thing because it's easy to find the error codes after you find the connector.

[@UrbanSleepersOfficial]

If you have an AutoZone near your area, then you can just take your car and they'll usually check your engine codes with their scanner.

[@juanjasso2983]

Hey man good video! I have a crank no start problem with my 94 civic, my engine light doesn't stay on if I turn the key so I was wondering if it would still give me the error code if I tried this? Because I've changed the distributor, changed the main relay, and checked for fuel and all that is there but the car still won't start. Thanks man.

[@reginaldjennings4534]

Thanks for the video I got error code 41 which I believe is the O2 Sensor or from my research Primary oxygen sensor heater

[@jaredmankins2327]

If it just stays solid, what does that mean? I've also got no power from the main relay to the fuel pump either.

[@UrbanSleepersOfficial]

Thank you for the comment!

[@BlakeGibbons]

So I could do this by starting the car thought right? My CEL doesn't stay on when I turn the key but 5 seconds after running it turns on and stays on until I shut the car off.

[@UrbanSleepersOfficial]

You're welcome, good luck!

[@03obietrice]

1998 Civic LX. Thanks for looking into it for me.

[@UrbanSleepersOfficial]

It's the blue plug with two small holes where you can insert the paper clip.

[@thanhthealien]

very good explanation. thanks!

[@alejandroalvarado457]

I have a 94 Honda Civic and my question is if these don’t have any port for the obd2 scanner thank you for you help

[@luiscasillas9853]

your video was very helpful thanks buddy

[@UrbanSleepersOfficial]

I'm glad it was able to help

[@ninjbpz488]

My honda civic ex 1.6L 1994 have 43 code and 22 code ​@@UrbanSleepersOfficial

[@UrbanSleepersOfficial]

Not a problem, O2 sensors for these Civics are recommended to be replaced every year for optimal performance, but oftentimes they are ignored.

[@axelmoiseslaham452]

Una vez al año? No sería mejor limpiarlos con carb clean ? Creo que No deberían durar tan poco tiempo..

[@JFA1331]

Nice video. My check engine light stays on all the time in my 90' crx si with a d16z6. I fixed code 8 and code 10, and now it stays on all of the time, even when driving. Any ideas? Thanks.

[@sabasbarcovich1959]

Did you clean the Lambda sensor ? In the begining of the exaust..

[@epicnate2109]

Went to auto zone and the guy was going crazy trying to find the port😭 (Didn’t know it was a different port)

[@balagecorp]

Hi all, this is the very useful video. I tried to close the two pins in my Civic (1994) but the check engine ligh didn't stay on. Do you have any idea?

[@CHEDDERxBOB]

Bad ecu

[@CHEDDERxBOB]

Thats code 0

[@81pressure]

@urbansleepers officials yea everything checked out and looked good..new distributor put on 2/24/2016,new TPS put on 2/20/2016,new fuelpump put on 10/¿?/2015,tune up 3 months,fuel filter and starter a year ago....wen I 1st got the car it was acting like it didn't go like it was hesitation..in 1st as I'm goin it starts doing the hesitates for about 5-8 secs once it stops doin it the car just takes off and hauls ass on its own but sumtimes I have 2 help it or it get stuck hesitating so I hit the gas a lil and it hauls ass like I have nitro or sumthin...ok I've had the car a year now and it was doin the same thing wen i 1st got it...so I figured it could old gas from sitn up for about a year b4 i I purchased tried high,mid,and reg. gas, gas and fuel injeictor treatments...and when I drive it lets was 20-30min the check engine light comes on and I notice my car starts lagging in performance: like longer shifts a ,..I'm 34 and ive always loved civics and accords 4 sum stranger reason...this is my 1st honda experience and I love it and i hope 2 keep it that way.

[@k864]

I test my civic 94 now... THANKS!!!!

[@UrbanSleepersOfficial]

You're welcome!

[@GamerFailure99]

What will it do if it has multiple codes?

[@galaxys5748]

I just got a 95 honda civic and the check engine has been on but nothing seems to be the problem I tried the paper clip trick and my check engine light kept blinking a bunch of times slow with the SRS blinking a lot of times what could that mean ? And my speedometer isn't working neither could that be the problem ??

[@UrbanSleepersOfficial]

Galaxy S5 When you do the paper clip trick and the SRS light blinks, you need to count the number of blinks to know your check engine light number. The video explains how to count them. The check engine light will not come on because your speedometer doesn't work, at least I've never heard of it doing so.

[@violetmomi]

thank you so much, i have a 1995 civic ex and i bought the ODB2 scanner yesterday, opened it, only to see it was for years 1996 and up --__-- now i know thanks to your video only need a paperclip. I was wondering tho if you know if there is an adapter for the newer scanners to work with the older civics.. all other makes but honda seem to have one. Thanks!

[@03obietrice]

Thanks for posting the video. How do I translate the number I got so that I can figure out the error. i got 8 long flashes and 2 short equaling 82 but how do i know what the OBD number is?

[@Kushsmoka420]

Good video....i was looking for this

[@kylepeterson7323]

Thank you so much! My water temp sensor was bad cause the light to come on.. Phew

[@UrbanSleepersOfficial]

Good thing you found the problem so it doesn't overheat this summer. Thank you for watching!

[@markromero9499]

Can you help me pls. I don't know how to get to engine codes

[@UrbanSleepersOfficial]

The video shows the location of the blue plug underneath the glovebox.

[@chiosaeteurn9790]

Anyone know how to reset or turn off the abs light for a 95 Honda Civic?

[@sheldonlamey7010]

Why do you have red needles for your gauges instead of white?

[@lonewol4174]

Thanks bro! Good Shit!

[@tresiakamanya9401]

I need help on that my Honda have same problem sometimes that engine light display.. What must I do?

[@XiledJD]

Hey guys i would like some help with some codes i hope you can help me i think its code 1 and 14 but im not sure the last flashes seem too soft i dont know it they are to be counted Check engine light code Help? thanks in advance!!

[@amamorim]

Thank you a lot!

[@deiseferrante3317]

É isso aí..

[@joegerardi9689]

thank you ! what if you have more than one problem ??

[@DesRainOG]

Yepp, i found it and got my codes so this helped so much!

[@bernardjr.ancheta5068]

what if the clip is put into the slot provided, the chexk engine ligt lights up but it wont blink

[@03obietrice]

Thanks for the help!

[@Rastathick0206]

thank you!!

[@UrbanSleepersOfficial]

+Rastathick0206 You're welcome!

[@UrbanSleepersOfficial]

You can search the code online and there should be websites that tell you what your engine code is for your specific vehicle.

[@tyroneshotwell883]

Thx alot bruh

[@UrbanSleepersOfficial]

You're welcome

[@alexcruz1876]

i have the check engine lights on but i did what you explain and it that lights started blinking4 times can you please tell me what number is that???

[@UrbanSleepersOfficial]

I'm glad it was able to help you out!

[@prestonperry1806]

Thank you 🙏

[@MADHEAVYMETAL]

thanks for the help!!

[@joseandrade1637]

ok i have a question. my light turns on as soon as i start my car but wont flash or turn off? what esle could i go turn it off??

[@UrbanSleepersOfficial]

Try disconnecting your negative from your battery for about 10 minutes and then hook it up again. This will restart your ECU and hopefully erase your check engine light. If there is something that's wrong with your car, the check engine light will come back up again.

[@mudding456]

Thanks bro worked on my 93 civic ex

[@MJmotorsportz]

will this work on a 94 del sol as well. ik they are very similar to a civic. mine has the 1.5L D series. will be grateful if anyone knows

[@UrbanSleepersOfficial]

Yes it'll work because the 94 del sol 1.5 engine platform is the same as 92-95 Civics.

[@germanaderius4053]

UrbanSleepers Official So this won't work on my '98 Honda Civic ?

[@Chunkemunk3y]

Hi we have a honda civic 1994 and there is a sensor that we have disconnected that causes our check engine light to turn on and stay on. When we connect it the car jerks a lot and we don't know the cause to it. It also burns a lot of gas when it isn't connected. I was wondering if you might possibly be able to tell me what that sensor is and what I'd have to do to fix it!

[@hondadna93]

o2 sensor, buy a new one. Use google and find the cheapest one from a GOOD store. Summit racing has them for cheap, and rockauto.com

[@nmunding1020]

there are 2 different connectors in the same area, look up there again and im sure you will find the one with 2.

[@lonewol4174]

Hey Nice work.My.names Mario.I had a question for.my.Freind.Now after I.check.for.codes.Does that plug in anywhere?the blue unit .I also have another one.close.to.that.blue.unit but this.one. 3 small.plugin like places.wondering.where the hells they plug into.maybe that is.my.issue peraonally.

[@UrbanSleepersOfficial]

Lonewol4 17 Hello Mario, those don't plug in anywhere. You can just tuck them behind the carpet.

[@patriciocuetorua4727]

Hi, does this work for abs light? thanks!

[@UrbanSleepersOfficial]

Sweet deal man, I'm glad it helped you out!

[@rokaelramirez5163]

hello /,, urban sleepers how are you / / I wonder if you can tell me that the code 43-2 mean my honda civic 93

[@UrbanSleepersOfficial]

Error code 43 means "Fuel Supply System". You should probably check the fuel injectors and the levy rival wiring going to them. I couldn't find a code 42.

[@commoncoulson]

so my check engine light will come on randomly while I'm driving(a few minutes after i first start driving) and if I turn the car off and back on again, the light doesn't come back on again. what is that?? it's driving me crazy. also, idk if this could be related, but when I first start driving my idle will be really really low almost to the point of stalling especially when I have the a/c on..any ideas what the issue could be?

[@commoncoulson]

nvm I figured out it's just a bad oxygen sensor

[@UrbanSleepersOfficial]

No problem!

[@UrbanSleepersOfficial]

How did you find the error code? Did you use an OBD-II engine code reader?

[@cheeto818]

Hey I have a 95 civic but my connection has 3 ports not 2? what does it mean and what should I do? If you can help it would be much appreciated. thanks.

[@fredpalacios507]

does this apply to the 94 del sol too?

[@tommyazraelchow4441]

What is no 6? Can you tel me

[@UrbanSleepersOfficial]

Yes, #6 error code is: ECT - water temperature sensor.

[@ivanmata3482]

hello urbansleepers! i got a honda civic 95, the check engine light just stays on, that means i dont have an error code? or what i have to do to turn it off? im confused i already check some videos but i dont know

[@UrbanSleepersOfficial]

Make sure to connect the paper clip or wire to the correct slots to get an accurate rating.

[@mikeroberts6987]

This guy explains this as if he was talking to kindergardners. Hate when people explain stuff like that.takes FOREVER.

[@UrbanSleepersOfficial]

Some people need things to be explained step by step because they may not be the most knowledgeable when it comes to cars.

[@wildhorses4581]

can you explain it better ? shut up and appreciate

[@UrbanSleepersOfficial]

+Witdodo Djoyosaputro Thank you!

[@CrniBS]

Hi! I have a civic 2004 1.7 dtci and my engine light is on. i tried to turn it off with torque android but i couldn't do it. It says that is a p1113 trouble. How can i turn it off? Can you help me out? Thank you for your time.

[@mrlobster1287]

Last time some dick told me to use a paper clip for diagnosing a problem,I ended up shorting out a brand new relay for my radiator fan........doesn't sound like a good idea

[@81pressure]

93' civic dx 5sp by the way

[@Rastathick0206]

Question. my engine light on my 92 Honda civic turns on every so often and I cannot take it to auto zone to check it put because of the year. can u b able to tell me what you think it is?

[@UrbanSleepersOfficial]

+Rastathick0206 I'm not sure what it would mean exactly because I would need to know how many time the light flashed. When you see the light flashing, try the method in this video to figure out what is your check engine code. Another thing I would try is disconnecting the negative cable from the battery and waiting 10 minutes to reconnect it, so that the car's computer resets.

[@ryandeleon6545]

What if the check engine still steady what isa that mean?

[@teamkaosID]

When I checked mine it just flashed even no fast flashes just long flashes. Looked up the code an it could only be 1 of 3 codes an my cars a 5spd so 1 is for auto trans. So that leaves 2 possible codes. One says electrical load an the other is iat valve. 10 an 20 are what codes it could be. Any help would be great

[@UrbanSleepersOfficial]

How many long flashes did it make?

[@teamkaosID]

It was my intake temperature valve. 2 long flashes if 8 remember rite.

[@stick18]

Someone told me if the check engine light stays on means you have a ecu problem

[@UrbanSleepersOfficial]

That may be true.

[@rogerceh445]

did u find out if the light stay on means something?

[@UrbanSleepersOfficial]

Roger Ceh It may mean that the ECU is bad. You may want to also check the 7.5a fuse in the under-the-hood fuse box to find out if there is power going to the ECU.

[@ronvalentini6936]

Kevin Sarmiento What does Ecu stand for? engine ? ?

[@ahapainenpaavo6010]

@@ronvalentini6936 ECU - Engine Control Unit. Basically the brain of your car.

[@sandman5371]

what plug did u insert clip into?

[@vandamnjaunclode9813]

man icannot read engine code i made video can you read for me and tell me the code number its confusing

[@kevrayo12]

did that but, check engine light stays on just like yours. the problem is when I'm running the car and I break the check engine light comes on. I have a 93 del Sol.

[@UrbanSleepersOfficial]

I'm not sure why the check engine light would come on if you step on your brakes. After stepping on the brakes, does the check engine light continue to stay on?

[@josecastorena9455]

where did u find the connector???? i have a 93 aswell and i cant find it

[@calvinoslen]

hello there, i'm a new eg8 user. the check engine indicator keep flashing while the car is running. what does that mean and how to solve it? thanks buddy

[@UrbanSleepersOfficial]

That sometimes means that there is something wrong with the ECU, which is the car's computer. Try disconnecting the negative and wait a couple of minutes before hooking it back up. This should help reset the ECU and the problem may go away. If not, then there may be an ECU issue and the ECU will need to get checked out. It's also a good idea to check the main relay and make sure none of the soldering points on the relay are cracked.

[@calvinoslen]

thanks for your advice.

[@UrbanSleepersOfficial]

you're welcome

[@richyBMXs247]

code 21, please help, i read its a V-Tec Solenoid but not sure if it its correct

[@ronvalentini6936]

If i turn off the check engine light off with a scanner will it pass the test. Its not flashing thats a big problem on a civic

[@UrbanSleepersOfficial]

Technically, yes. But there is a chance the CEL might pop up again once you start driving it. Try clearing it and drive the car around to see what may trigger it to pop back up, or how long it takes for the CEL to come back up if it’s going to.

[@ronvalentini6936]

UrbanSleepers Official thanx bro it comes back on about 2 days later. That means i can do the test and they won't know i turned it off

[@VikingHill83]

What if the check engine light only comes on after driving it for a while and not right when I start the car

[@UrbanSleepersOfficial]

This may be because the check engine problem is related to the driving functions of the car. Or else it won't come out if you're just idling the car.

[@fuentesoscar88]

UrbanSleepers Official so what do u do if u have that situation the check engine only comes on when driving it

[@alocamaro]

My srs light is flashing not the check engine

[@UrbanSleepersOfficial]

That means there is something wrong with your airbag system

[@bondssucks]

Would this work if I had more than 1 problem?

[@UrbanSleepersOfficial]

Yes it would because there would be a longer pause in between different check engine codes so you know all the problems the vehicle has.

[@pantuflo4280]

My check engine light stays on but my SRS light keeps blinking. It's been blinking for the past 2 min as I've typed this comment... engine light still on solid...

[@UrbanSleepersOfficial]

Pantuflo Do you have your airbags all hooked up, or have they been deployed? The SRS light means there's something wrong with your airbags.

[@pantuflo4280]

UrbanSleepers Official well it goes off when the car is running. But what's wrong with my car is it doesn't turn on when it's cold... I turn the ignition switch on and leave it until the fuel pump turns on . (It can take about 15-40 min before it does) once it does the check engine light goes off and then the car can turn on. I've had almost everything checked out even replaced the fuel pump and still nothing. I would either have to crank it 30 times before it can turn on. Or on hot days just leave the ignition switched on until the fuel pump turns on and off until I can turn the car on.... I've had 4 mechanics look at it but NONE have solved my issue

[@UrbanSleepersOfficial]

Pantuflo There is a part underneath the dashboard called the Main Relay. If you do a search on KZbin you'll be able to find videos about it explaining how they can be fixed. You might have a Main Relay with bad solder points that needs resoldering or to be replaced altogether. I had a Civic that would take a long time like yours to turn on because of the Main Relay.

[@pablomr3391]

i have hoda civic 93 and blinc 9 time fast but i dnt knw how to find the code

[@UrbanSleepersOfficial]

Pablo Mr you can go to Google and enter the year and model of your car and add "CEL code 9" to your search to find what it means

[@jabzter100]

We're do I look up the codes

[@Ezzzzzzzlol]

Bro i get error 24 but can't find that error

[@wildhorses4581]

What if there's no error? would the CEL light stays ON or OFF ?

[@UrbanSleepersOfficial]

If the small hello engine light doesn't come on, then that means you don't have an engine light code.

[@wildhorses4581]

UrbanSleepers Official i know, but what if after you jumped the wire (the blue socket with paper clip) the engine light stays ON, didn't blink or OFF, what does that mean ? does that mean i dont have a light code ?

[@UrbanSleepersOfficial]

Witdodo Djoyosaputro If you're checking for a code and the light just stays on, then that may mean your ECU is bad, or "dead." Try checking the 7.5a ECU fuse in the under-the-hood fuse box to see if it blown and not providing power to the ECU.

[@wavyskaters]

In the video u said that completely backwards. So does it have codes with the engine light just on no blinking or??

[@wavyskaters]

In the video u said that completely backwards. So does it have codes with the engine light just on no blinking or??

[@chinoserrano4292]

does technique work on hatchbacks as well?

[@UrbanSleepersOfficial]

Yes, as long as it's between a 1992-1995.

[@chinoserrano4292]

+UrbanSleepers Official I just found out the car is 98 darn :(

[@UrbanSleepersOfficial]

+Chino Serrano What you can do is go to your local AutoZone or O'Reilly auto parts and they can scan your error codes for free. That way you know what is wrong with your hatch

[@RaphaelCozzi]

Why some codes comes from the D4 and other codes comes from the Check Engine? Mine, has check engine blinking 9 times and D4 blinking 8,10 and 13 at the same time.. please, anybody help

[@UrbanSleepersOfficial]

I’m not too sure why your D4 is also blinking. I would just pay attention to how the Check Engine spot blinks and for how many times. Then you can look up that CEL error code. Do it again and if the CEL light still blinks fast 9 times, then you have error code “9.” Code “9” is #1 Cylinder Position Sensor. Your sensor may be acting up.

[@RaphaelCozzi]

Yes, that's right. It blinks 9 times like this. Is this sensor inside the distributor? Is this the same as "crankshift sensor" like this: www.amazon.com/AUTEX-Crankshaft-37840P0AA01-compatible-1996-2001/dp/B01D30LETO/ref=sr_1_fkmr2_1?ie=UTF8&qid=1532092337&sr=8-1-fkmr2&keywords=accord+94+crankshaft+sensor ?

[@UrbanSleepersOfficial]

Check out this link. It’s to a forum that may help you find the solution to that CEL number. Thank you honda-tech.com/forums/acura-integra-6/check-engine-light-code-9-obd1-2788506/

[@RaphaelCozzi]

UrbanSleepers Official thanks! I'll check

[@samer4977]

does these codes work for all type of cars ??

[@UrbanSleepersOfficial]

jordann flat You should do a search online for your specific car's error codes

[@jamierios6273]

Can you do this while the car is on ?

[@UrbanSleepersOfficial]

No because you need to turn the key to the ON position to turn on the ECU with the wire or paper clip jumping the harness.

[@taponotapono]

how would you take codes out from a HONDA CIVIC 97 DX...please i NEED HELP!!!!

[@lionreb]

97 has obd2 codes. they can scan it at auto zone.

[@santagrifa7063]

What if no code flashes but the car is running like shit

[@RedKnightHunter89]

What if the check engine light doesn't flash and just stays on

[@UrbanSleepersOfficial]

It may mean that the ECU is bad. You can check the 7.5a fuse in the under-the-hood fuse box to find if there's power going to it as well.

[@abelgonzalez1840]

where can i get the service manual ive been searching online with no luck T.I.A

[@UrbanSleepersOfficial]

You may be able to find it on Civic forums to download for free.

[@wildhorses4581]

1 O2A - Oxygen sensor #1 2 O2B - Oxygen sensor #2 3 MAP - manifold absolute pressure sensor 4 CKP - crank position sensor 5 MAP - manifold absolute pressure sensor 6 ECT - water temperature sensor 7 TPS - throttle position sensor 8 TDC - top dead centre sensor 9 CYP - cylinder sensor 10 IAT - intake air temperature sensor 12 EGR - exhaust gas recirculation lift valve 13 BARO - atmospheric pressure sensor 14 IAC (EACV) - idle air control valve 15 Ignition output signal 16 Fuel injectors 17 VSS - speed sensor 19 Automatic transmission lockup control valve 20 Electrical load detector 21 VTEC spool solenoid valve 22 VTEC pressure valve 23 Knock sensor 30 Automatic transmission A signal 31 Automatic transmission B signal 36 traction control found on JDM ecu's 41 Primary oxygen sensor heater 43 Fuel supply system 45 Fuel system too rich or lean 48 LAF - lean air fuel sensor 54 CKF - crank fluctuation sensor 58 TDC sensor #2 61 Primary oxygen sensor 63 Secondary oxygen sensor 65 Secondary oxygen sensor heater 71 random misfire cylinder 1 72 random misfire cylinder 2 73 random misfire cylinder 3 74 random misfire cylinder 4 80 Exhaust Gas Recirculation insufficient flow detected 86 ECT Sensor (Engine Coolant Temperature) circuit range / performance problem 90 Evaporative Emission Control System leak detected in the fuel tank area 91 Fuel Tank Pressure Sensor low input 92 Evaporative Emission Control System insufficient purge flow

[@UrbanSleepersOfficial]

For Civics between the years 1992-1995, they are all OBD I. Civics between the years of 1996-2000, they are OBD II. I searched if there was an error code 82 for Civics 1992-1995, but couldn't find any error code 82 anywhere for them. What year is your Civic?

[@smokingwithclutch3349]

Its not woeking for me and I have the same car as you.

[@sergiorosales1689]

can I do this in my 99 honda civic dx?

[@jonathanmitchell6138]

no

[@UrbanSleepersOfficial]

No, you need to hook up an OBD-II error code scanner

[@carlmeyers606]

ecu light is staying on 91 civic why?

[@UrbanSleepersOfficial]

Sometimes when the Ecu light stays on, it means that the Ecu itself is damaged and needs to be checked in order to correctly function.

[@UrbanSleepersOfficial]

Your 1998 Civic LX is an OBD II system, so you can just take it to any AutoZone or O'Reilly's and they can pull out your check engine codes for you for free.