Finally have some time to wet sand the gloss black 2K paint I applied before and spray on some clear 2K. Half time-lapse with last half clear coat spraying.
Пікірлер: 13
@Semi0ffGrid75 ай бұрын
This is one of my most favourite channels, great projects and workmanship!
@Ryengoth5 ай бұрын
Thanks! I hope you learn something new and are not afraid to try it yourself.
@Semi0ffGrid75 ай бұрын
@@Ryengoth I have practically watched every video on your Saab 9000 project with a thumbs up on every one. I have a 1996 Saab Aero in silver with manual transmission and it needs work, rust on the wings, rust underneath at the rear, and many other issues but I am not sure that I could do the kind of work you have done on yours, very technical! If only you lived down the road from me but alas there is an ocean between us! Thank you for your videos particularly the Saab videos.
@kvacksilver52764 ай бұрын
Hey Ryengoth, your channel is gold! You're the only one who posts 9000 videos on yiutube. I have a question - have you ever replaced a door handle/lock on these cars? My CSE 9000 had an unwelcome visit by an amateur car thief. I swapped the lock cylinder, but it doesn't lock when I turn the key. I suspect the metal rod with the little plastic joint - is it important to put it in a certain position?
@Ryengoth4 ай бұрын
I have swapped handles before. There is a short rod and clip that must be connected for the cylinder to move the lock lever on the latch. The pull rod also connects to it. Getting that short rod connected can be a pain. I will try to post a YT short showing the linkage setup on driver side.
@kvacksilver52764 ай бұрын
@@Ryengoth That would be fantastic! I have a Haynes DIY manual, but I still don't get it right. I have so far only touched the rod with the white plastic joint - I find it weird that there is no "channel" or crease that fixes it in a certain position. It goes a long way downwards, to the door bottom. Thanks
@kvacksilver52764 ай бұрын
Clarification - I have everything set, the door handle moves as it should, but I know of no other rod than the one I mentioned
@Ryengoth4 ай бұрын
Those are supposed to have a clip that snaps onto the rod. The split off over time.
@Ryengoth4 ай бұрын
kzbin.info/www/bejne/naHSnoFprrBknZo
@screwit84085 ай бұрын
Tell us what you can't do! ;) Do you work as a mechanic or is it just a hobby of yours?
@Ryengoth5 ай бұрын
It is one of my hobbies, I have lots of hobbies. I have been working on cars for over 30 years, including bodywork. Expert at only a few, but capable of many.
@screwit84085 ай бұрын
@@Ryengoth Keep it up! Really enjoy your content and how you teach us new things