Рет қаралды 12,384
Here are the steps to program your chevy blazer key fob. I purchased mine on amazon for around $20 for the set.
1. Close all doors
2. Insert key into ignition
3. Hold down the power UNLOCK button on the driver's door panel
4. Turn the ignition to the ON position (as far as you can go without starting the engine.)
6. Turn the ignition to the OFF position.
7. Turn the ignition to the ON position (as far as you can go without starting the engine.)
8. Turn the ignition to the OFF position.
9. Release the power UNLOCK button on the door panel. The locks should cycle and if they don't repeat this process.
10. Hold down the LOCK and UNLOCK buttons on each remote until the doors lock and unlock one at a time.