How To PROGRAM YOUR NEW GM REMOTE!

[@blakelibby2140]

THANK YOU! Worked first time following your video. Guy as Advanced Auto Parts told me I had to program it at a dealer. He's full of crap. Took all of two minutes and now I have a brand new fob. TWO THUMBS UP!

[@sheehy933]

I just saved myself almost $200. That's what a locksmith wanted to cut 2 new keys and program them. I went online and found out how to do it myself and both new keys work. I spent $6 on two new keys and $2.78 to have them cut at a hardware store. Next up will be two new remotes. I love KZbin for this kind of content.

[@MrLeeHuffman]

What hardware store was this sir

[@makeminefreedom]

I was quoted 1 remote for 70 dollars by a mobile key duplication company. Thanks to your video I just ordered 2 remotes from Amazon for 25 dollars. Thank you so much for making this video.

[@clerissonmesquita]

Your insights are immensely valuable to me. I deeply appreciate your contribution and commend your exceptional work. Wishing you a fantastic day ahead!

[@shandac_m_1987]

Finally someone who could truely help me thank you so so much

[@edalbrite767]

I tried 2 other guys before you on my corvette. Theirs didn't work but yours did...thank you for video!

[@tauruslife511]

@@edalbrite767This was my 12th video. 😂 Every one of them went through “relearn remote”in settings. Mine does not offer that.

[@joanjennings9082]

Thank you sooo much for this video. Before I remembered to check KZbin to help me figure out how to do this process. I was about 10 minutes in and getting frustrated. Thank you for a real simple explanation. I followed along and was able to get the key fob programed....yeah! Thank you again.

[@squarebody8454]

Bought a fob on amazon. Tried to program with no luck. Replaced the battery the remote came with and it worked!

[@GR-zf5dm]

Thanks for your video! It saved me $210 to have it programmed at a repair shop

[@stevethurman1767]

Worked exactly like you said! Accurate, short, to the point instructions!

[@beccafred2]

Thanks! I kept my old fob from my wrecked Suburban and because of your video, I was able to reprogram it so I have an extra for my "new" 2005 Yukon XL.

[@shelliewebb1631]

Same here. Still lost. Is there a link for a listing of each step?? Can you help a brotha (or sista) out?! I’m female but I’m not an auditory learner. I need a list and then I will see it while you say it.

[@tauruslife511]

So you’re saying a old Chevy Equinox key fob will work on a Chevy Traverse if I program it.

[@SherifEgypt]

This channel is just the right one for my 2008 trailblazer, thanks.

[@HardTrancid]

Question if I do this will it forget a lost or stolen key fob?

[@41663]

Yes it will so , 😊Just program all of them at the same time . Do one , set it down then grab the other one , hold down the buttons and listen for the lock sounds. They will both work or how ever many you program. And of course cycle the key switch once then open your door and your in business

[@lillamitto8242]

Very informative, I followed all the instructions and was able to program all my remotes and they worked perfectly, thanks

[@ForTheLulzz]

You saved me time and money from going to a shop to get this done, thanks bud!!

[@rrubyy22]

I'm so glad I found this video! I just saved myself 150$ thanks so much for sharing!

[@soniac8532]

❤❤THANK YOU THANK YOU THANK YOU!!! I bought a keyless remote for my 2000 Infiniti i30. It came with a website to program it. It wasn't working at all. Found your video and presto it worked immediately!! 🎉

[@annapearson1962]

Definitely help me. Very clear n concise. The instruction paper I got with the key fob did not work. Thank you so much

[@SumBoutBre]

Oh my goodness thank you soooo much! I was able to do this in real time with my daughter holding the phone lol. We were both genuinely amazed that it actually worked!!!

[@kevinrandall6789]

Fantastic directions without all the crap. Good job!!!

[@davealston5371]

How cool is that? About to dig into the keyless system in the vehicle to find out why neither o f my key fobs worked. This process did the trick. Great info and thanks.

[@alvarozacarias7692]

Great demonstration on how to program the key remote. Very helpful thx.

[@Decreet]

I’m having problems programming a remote on a GMC 2015 Savana, will this work on it? I have tried everything!

[@debrastiltner8268]

How do I get a cheap replacement key for 2007 Chevrolet HHR programed

[@debrastiltner8268]

Please help

[@sauloliansky9522]

Did not work on my 2006 Saturn Vue. Followed instructions...key in, close door, hold unlock button down, roll key ON and OFF 2 times...car did not lock/unlock/honk. I was really hoping it would work. Did I do something wrong?

[@jhern1990]

It didn't work for me either! Any luck now?

[@sauloliansky9522]

@@jhern1990 No

[@antoniomunoz1789]

Thank you. Keyfob just came in the mail. Going to go try now.

[@earlcacal4596]

It only does the new and doesn't keep the old one programmed. I have both while doing this. So my question is still how can you keep both programmed?

[@jennifercobb5140]

Worked perfectly with two fobs I got on Amazon! Thanks for saving me a ton of money!

[@rjgurnick715]

I can't get both fobs to work on it 😔😔

[@iraqsaher]

Do i need to keep my left hand unlocking bottom during the whole operation?

[@mame-lomamee]

2:27 do you keep pressing the button the whole time or let go before programming ?

[@tauruslife511]

0H 0H 0HHH! I watched. I don’t know how many videos this weekend after replacing the battery in my key fob. Every one of them said the reading in the vehicle needed to be on relearn remote. I did not have that option and it never came up. I just came across your video and I am praying that this works. I cannot wait to try it!!! UPDATE: BOOOO 😢

[@reyesjose214]

Does this work for 09 and 16 models??

[@KimPBarnard]

Bought my 2 remotes from Amazon for our 2007 Hummer H2. Looks exactly like the one featured in this video. First programming went perfectly. 2nd fob isn’t … it may be a bad battery though (even though it should be brand new). Thank you so much for the simple step by step instructions!

[@murph9813]

How long do you hold your finger on the ( unlock and lock ) button?

[@craigvanduren]

Thanks for this video! I was able to program my remote. However, when I use the new fob and close the truck, it doesn’t fold in the side mirrors. Should it be programmed somewhere else?

[@deecote]

Thanks! I needed the refresher as I have to purchase a new keyless entry fob for my '08 HHR van.

[@mauricecarter1900]

Thank you for the info. Will this work on a 05 cadillac cts

[@jaygamez203]

Would this work on an 2005 Pontiac gran Prix

[@vexelite77]

Thank jimmy. Commenting to boost the video algorithm

[@yadiraquiles6841]

Ok this is the part I dont understand, I'm going three of them so do I repeat all steps for each one or once the first one is set up all tou do is press the lock and unlock on the fob for 30 seconds

[@jeremycole6873]

That's the second time this video has helped me thanks again!

[@SpynCycle57]

Before you replace a non-working key fob, try taking it apart and cleaning the contacts, where the button presses, with electrical contact cleaner. Mine were dirty.

[@martybgood62]

My only question is are you still holding down the unlock button on the door while pressing the remote buttons? I assume yes.

[@nethacker1398]

2:55 do I still hold unlock on my door meanwhile?

[@ffighter6932]

No

[@demondjohnson1911]

My number 8 isn't populated on my odb port. Actually only 4 are. Any suggestions?

[@DaVibezVirus]

Do you have to pull the fuse on a Pontiac Grand Prix GTP

[@Dee-p3n]

Would this work on a 05 Cadillac DeVille with GM key and fob?

[@rolloben]

What about a 2011 Silverado I'm having problems programing it as well as getting a key made?

[@YourCourageCoach]

Worked like a charm or a key fob. 😂 Thank you for a no fluff video.

[@davidclough3951]

Gee, mine I only had to press the lock and unlock button, but had to make sure the old one was there also so it would still work. Actually when I bought my vehicle the one they had was worn, so they gave me a new one that worked fine, but the old one didn't.. so either the owners manual had instructions or found online, can't remember that just had to hit both lock and unlock button to set it up, but had to have any other where also so it would be set too. So took both to vehicle and on the new one pressed both buttons, and then the old one worked also.

[@marilyngatson2289]

So if your programming another key fob after you programmed the first key fob, do you need to do all the steps for each key fob or just hold the locka and unlock button for the other key fobs?

[@yuuwhoo]

My question also.

[@chrisarmas8319]

What if you have remote start tied to your original fob, as press lock 3 times to remote start my truck. Will that carry over to the new fob?

[@Ram_Zee965]

Do I have to keep pressing the unlock while doing this process to the end?

[@gusshelgoshiii1836]

Is there any way for it too operate windows?

[@abdiaspalacios7194]

Thanks for the information in your video. I did and it worked fine. What it doesn't do is beep when I lock or unlock the doors, do you know why?

[@tauruslife511]

Did you figure out it was in the settings?

[@swtbbyjms3806]

My 98 GMC Sierra 2500 has no fob. Can I buy a fob and program it with these instructions?

[@clay2884]

What year was the vehicle? Different years have different steps for setup.

[@robertwilliams4312]

Thanks Jimmy, this helped out a great deal. Actually just replaced mine today. November 25 2020

[@EddiePayne-wj9yn]

How do you set the seat position with the key remote

[@R2A300]

wow well it worked for me 99 Cadillac Deville no bs it really worked big thanks

[@cmcil]

Hello! Do I need to have the key that comes along with the fob cut? Can I use my old key to put in the ignition?

[@MrPunx-zj3il]

Yeah you use your old key to start the car and have your new key fob to do your thing

[@revisgriffin798]

Yes, it was clear and easy all i need was one of those staples that was easy buttons.

[@RobertDeCarolis-u7x]

How do I program my new keyless fab To my 2006 Chevy Equinox?

[@Local6News]

*Yep, worked on our 2009 Chevy Malibu! Locks didn't unlock and lock but I heard a click and went through the programming process and heard another "click" after holding the 2 buttons down.*

[@4192779311]

I have a 2004 Cadillac Deville with a new key fob how do I program it

[@massimoflores3100]

Jimmy, will this work for for a 2004 Cadillac DeVille key fob as well?

[@rocknrod32]

Worked just like you said - best instructions I have found!

[@debrastiltner8268]

What is the Amazon link for a key

[@MPulicci78]

I have a 2006 chevy express van…. This procedure did not work any ideas?

[@jorgetrevino5757]

I try several times and cannot hear the lock what you suggest

[@BryanMozingo48161]

It did everything except lock and unlock, responded appropriately to setup but still won't lock or unlock truck?

[@juanvalencia7889]

Thank better instructions than the one's I got from the new key fob 😄

[@doctormoto8770]

Thank you for the help and the great video brother! 👍

[@dalevalencia]

is this applicable on all car brands?

[@lsxmcneal263]

Awesome video man!!!

[@-LiFe-ej5mv]

Can i reset reprogram keyfob to a different vehicle. Reason is my 2003 yukon got totaled and had bought 2 keyfobs for it and now bought a 2004 tahoe.

[@edrosa5079]

Jimmy Thank You took a couple tries but got it done Better than paying some kid 60 bucks a fob

[@graysonsgarage5157]

Does this same method also work for the trucks as well (Silverado, Tahoe, Suburban, etc.)?

[@1RoadGarage]

I believe so. Just try the unlock and roll the key forward twice and see if the truck responds with a lock and unlock. If so, I would assume you're in program mode...

[@esrdiscoful]

That was amazing. Thanks for that. I need to do 4. Now, I know how. Saved me time and money...

[@josecayente3017]

Just yesterday got mines for my '04 Avalanche and it worked. Thanks

[@Honeyyumyum]

Mine didn't work

[@mysterymann187]

What if your driver side master switch doesn't work 🤔?

[@نوخذاأمسقيم]

Thanks for your explanation , did I keep the finger on the unlock bottom until finish the program?

[@marksokolski3517]

This didn't work on my 2011 traverse. Any other info?

[@davidgeorge695]

I just followed your instructions on my 2006 Saturn Vue and nothing happened when I held the unlock button on the door. That was already an indication it wouldn't work . I tried all the steps and nothing happened. What else could I do? I bought the fob on eBay and it supposedly works with my vehicle

[@oz7245]

Try a new battery in the fob.

[@1200s-e8n]

My 2012 GMC Yukon does not have a "relearn" option.

[@ErsinGokay]

Absolutely Awesome video. Thank you for making and sharing this video. God bless you and your family.

[@davorpetreski9114]

Does this process work for the Chevrolet Tacuma (Rezzo,Vivant) 2006?And does they key fob have to be 433MHz or 434MHz?

[@preston803]

Hey I just bought two new keyless remote for my 2000 Cadillac DeVille. Will these steps work?

[@GP-ot4wt]

Can more than one key fab, be programmed!?

[@cg2281]

when do you let go that wasnt mentioned

[@kevinsmith1896]

Hi, Does this method work with a 2008 Chevrolet cobalt?

[@medicmark9683]

Will this work with new fobs for a 2003 Cadillac CTS

[@tonypeters7791]

I tried this but it only programs the locking not the unlocking. Any suggestions?

[@fernandojimenez2276]

would that work for a pontiac g6?

[@punker4Real]

google each one are different the truck/SUV are slightly more complicated

[@thurm101]

Fernando Jimenez Did you ever get it to work

[@jx5189]

Did not work on my lesbre

[@BenWorrell]

Another Great Video!! Will this method work for 2012 Silverado ? I ask because when I researched this some time ago different sources said I would need a programmer that plugs into the ECM port in order to reprogram.

[@craftman5632]

I believe after 2010 they made it harder for the consumer to program their own key fob, so you have to take it into the dealership and pay the big money.

[@yn9861]

Does this work on 2008 Saturn vue?

[@Armflow]

Is the process depending on the car manufacturing year? What's yours? Thank you!

[@calebenglert692]

Didn’t work on 06 express van.

[@shawnschulte3321]

I tried this with my 05 equinox and I can't get the doors to lock and unlock after turning the ignition twice. What's the deal?

[@johnwilliams6965]

The truck honks twice after I hold the 2 buttons and the key fob doesn’t work, any solutions?

[@franciscosiqueiros5864]

Thanks brother. Appreciate your help!!