⭐ 1998 Toyota Camry - 2.2 - P1300 - Ignitor Circuit Malfunction 1

[@randharma]

Thanks for taking your time to do this video.

[@OnlineAutoRepairVideos]

Glad it was helpful!

[@davidcontreras8158]

Also check for leaky injectors or injector seals. Good video.

[@kennethjabay]

Excellent video! Thank you.

[@OnlineAutoRepairVideos]

Glad it was helpful!

[@KellysCookin]

Making me nervous with all these Toyota Camry videos all of a sudden, LOL!😉

[@OnlineAutoRepairVideos]

LOL, this is so weird that all of a sudden we are getting these Toyota Camrys, even Hector is about to release a video on one!

[@KellysCookin]

😮So weird! I'm happy to see these videos but hope I do not need to refer to them in the future, lol

[@OnlineAutoRepairVideos]

LOL, me neither!

[@slickdawg4634]

Was the replacement a denso brand or a generic universal coil? Because I’m having the same problem and the coil I installed isn’t fixing it

[@joefelicia7497]

Very informative. Keep up the good work. Thanks!!!

[@OnlineAutoRepairVideos]

Thanks Joe!

[@rltkktlr]

Hey Tim and Silvia. Way to put the Autol to great use!! Looking forward to the next video on this car. You are really good with that Autol. I am going to recommend to Autol that they pay you!! Nice work. Love the videos. Hoping I can get just a fraction of the skill you have on electrics. Take care, work safe. Bob

[@OnlineAutoRepairVideos]

Funny how you said that Bob! the people that sent us the free one, noticed all the videos we are doing on it, and wrote us, and asked if we can put a link to their Amazon page, on all our Autel videos. So we responded and said, "if you send us the ms908 ($2100), we will do that, and all future autel videos, they declined. They actually expected us to put a link to their page in ALL our autel videos, just because they asked, and we get nothing in return?

[@matthew53690]

Hey Tim! I believe that's what's called a waste spark system. It fires one cylinder and then the companion cly fires at the same time during the exhaust stroke. The spark goes out the plug, through the head into the other plug and back to the coil. The igniter isn't the same thing as the coil but on this model its inside the coil! I love my electrical lol

[@OnlineAutoRepairVideos]

WHAT? I really appreciate that lesson Matt! i knew about igniters and coils, but had no idea of the waste spark system,THANKS!

[@matthew53690]

Astral Auto Repairs awesome! No problem I love this stuff

[@NoneMechanic101]

Great job

[@OnlineAutoRepairVideos]

It's funny how Kelly JUST bought a Camry, and now we are doing videos on them!

[@ManicMechanic007]

Man, you made that look easy.

[@OnlineAutoRepairVideos]

HEY LEN! I meant to show that using the AL539B, we could get the codes AND graph the coils, using only one machine, DANG IT!

[@monicaburgueno2799]

Good video Silvia

[@OnlineAutoRepairVideos]

Thank you 😁

[@davidw9403]

I have a '96 4cyl Camry with this code. I changed the fuel pump, fuel filter, spark plugs, wires, dist. Cap, ignitor, ignitor switch, cleaned the throttle body and IAC valve, so I'm doing everything apart from P1300 and the car won't stay running. Unlike the '98 camry, mine has all four wires connect to a distributor cap which connects to a black box next to the ignition module. For my vehicle, should I back probe the connector on the ignition module to get the feedback from the ecu? I really don't wanna change a computer because I never did it.

[@OnlineAutoRepairVideos]

Hey David, before you probe those wires, see if you can get a wiring diagram to see what those wires are suppose to read.

[@donnaharris7304]

I also have a 96 and have done everything you have done So frustrated

[@raneilalonzo]

Thanks for this tutorial. I learn something. I do have a couple of questions: Is this Autel like a poor man's version of the Snap-on Verus? Second question: When you were cranking the ignition the engine just keep on cranking without actually starting. Did you disconnect the fuel pump fuse so that the engine won't start and won't get flooded? I'm not a mechanic - just a guy who wants to know how to fix things. Thanks for the education!

[@OnlineAutoRepairVideos]

Hi and THANKS!! The AL539B is more comparable to the snap on vantage. No we did not disconnect anything, BUT, that would be a great idea to do so

[@OnlineAutoRepairVideos]

Also, if you want to learn more about using the Autel AL539B, here is our other channel on it: kzbin.info/door/Tq2syPYXSCGsMUF5I5SV1Q

[@raneilalonzo]

Astral Auto Repairs thank you 🙏

[@perez7667]

Hey, Tim. We are dealing with a misfire on a toyota with 4 wire coils. The owner replaced the connector, and for some reasons, the IGt wire is installed where the ground wire is supposed to be. I would say that the IGF is shorted to ground. Since the IGT is the signal from the ECM to the ignitor controlled by a power transistor or driver in the ECM, a shorted IGT wire would most likely take out the driver unless the driver is protected against such thing, right?

[@OnlineAutoRepairVideos]

That's a good question because SOME ecms will protect itself from a back feed or short, while others (Chrysler In particular) will burn out the driver. I would suggest checking for the signal right out of the ecm, with the coil DISCONNECTED.

[@rogeryanez8107]

Love these videos brother keep them coming, Quick question will a bad coil cause code P0300 and P0301 on a 98 Toyota Camry LE, Thanks and God Bless ✌

[@OnlineAutoRepairVideos]

Thanks, and yes it can.

[@rogeryanez8107]

@@OnlineAutoRepairVideos Thanks brother, I can definitely dig it 👍

[@andrewsuarez4650]

was it confirmed to have bad ignition wires? My 97 camry 2.2l has the same code and also doesnt start up when turning the key. im waiting on new ignition coils to come in the mail but should i go ahead and order ignition wires?

[@OnlineAutoRepairVideos]

YES, change your wires as well, and be sure to check the condition of your spark plugs!

[@jorgealopez4232]

Would it be the same on a 1999 Toyota corolla

[@OnlineAutoRepairVideos]

If the engine sizes are the same, then yes.

[@rubennunez5550]

EXCELENT.YES TANKS.GRACIAS WELL DONE.

[@OnlineAutoRepairVideos]

Thank you Ruben!!

[@littlehandsomej]

Hi I was wondering if this can be done with a multimeter instead of an oscilloscope like shown in the video. I tried but im not sure if the readings were what i should be getting, 5v on conf and 1.2v on control.

[@OnlineAutoRepairVideos]

More than likely it is possible.

[@kimsantong8185]

Good ❤

[@OnlineAutoRepairVideos]

Thanks ✌

[@DJNEGROBEATz]

Hi I’m having the same issue with 1999 Toyota Tacoma sr5 2.7 4x4 manual already replace coils, spark plugs wires, ecu check the ground I’m still getting the code and stalling every time I drive any help please what should I check next

[@HOTRODRICO]

fuel pump

[@em1j797]

Hey Tim I was wondering how do you know which one is the control wire? You have a wiring diagram or you just been doing it so long?

[@OnlineAutoRepairVideos]

LOL, yeah I wish I was that good!!! We have wiring diagrams.

[@em1j797]

Astral Auto Repairs I didn't know man cause your pretty slick on some stuff lol good job

[@OnlineAutoRepairVideos]

Lol, thanks for the vote of confidence

[@mrredpill4072]

Aye Timmy I'm buying this 2000 Camry in November from my church friend n it has about 80,000 miles on it u know I got to jump on that so I see this 98is no different so any repair videos on the old school vantage Camry I'm taking notes lol

[@OnlineAutoRepairVideos]

LOL, does it need any work?

[@mrredpill4072]

@@OnlineAutoRepairVideos I test drove it it rides way better than my current car um no leaking valve covers they used pink coolant the brakes are sharp suspension is a a1 I felt no bumps unlike my current car but I hook a scanner up to it n it said it had a small evap leak!!!

[@OnlineAutoRepairVideos]

I don't think it's going to be bad, just a little difficult to locate, maybe.

[@mrredpill4072]

@@OnlineAutoRepairVideos ikr good thing we don't have emissions here lol

[@ConklinTa]

I have the same code but my car shut down while driving and now will not start. When I start it it will crank and attempts to idle for a few tenths of a second before shutting off again. Any ideas?

[@OnlineAutoRepairVideos]

Do you have any other codes besides the P1300?

[@ConklinTa]

@@OnlineAutoRepairVideos EGR codes and an o2 sensor bank one. Both of which have been on since before I bought the car. It's a 211,000 mile beater so I'm not trying to fix everything under the hood. But it shut off today at 70mph and now it's on the side of the road lol

[@terryconklin2209]

@@OnlineAutoRepairVideos I replaced the #1 ignition coil not long ago due to a misfire on cylinders 1 and 4. Since then it has ran perfectly. Now this all of a sudden. It feels like a fuel issue, but I know when P1300 is thrown the ECM will limit fuel, so that makes sense. I wonder if I got a bad coil right out of the box. But wouldnt that just cause misfires?

[@josephwood499]

@@ConklinTa Were you able to fix it? I'm having the same issue with a 98 Toyota Sienna on cylinder 1. Changed ignition coil but still the same. Is driving me nuts

[@cristy9750]

Isn't there a version with Spanish subtitles?

[@OnlineAutoRepairVideos]

Sorry, no there isn't.

[@Iseekoutthetruth]

117 views and only 11 comments, whats up with every body?

[@OnlineAutoRepairVideos]

Yeah, what's up with that, lol! you know us bats, 117 views is better than 116, lol!

[@pavetran1]

Will the igniter code cause my cause my car to stall out?

[@OnlineAutoRepairVideos]

Yes!

[@pavetran1]

@@OnlineAutoRepairVideos while im driving

[@pavetran1]

@@OnlineAutoRepairVideos then it takes a few minutes to restart after it shuts off

[@OnlineAutoRepairVideos]

@@pavetran1 Yes! But keep in mind that other things can have those same symptoms!

[@pavetran1]

@@OnlineAutoRepairVideos my code reader throwed off that p1300 code

[@andrewcookjr7442]

Looks like his air flow is disconnected

[@Multi-fd7cr]

Can the code P1300 cause P301 and P303 codes to appear?

[@OnlineAutoRepairVideos]

Yes!

[@TheVegasbud]

BOOM 1 uno son

[@fleettech3570]

Is it possible a o2 sensor could be acting up and not showing the check light

[@OnlineAutoRepairVideos]

Yes

[@fleettech3570]

@@OnlineAutoRepairVideos my 2013 kia is drinking a lot of gas and my autel scan tool is not showing any errors. But the section where is does I/M checks the o2. Part has a red x

[@OnlineAutoRepairVideos]

In your datastream, what is your coolant sensor reading, do you smell raw fuel, and is there black smoke coming from the exhaust?

[@fleettech3570]

@@OnlineAutoRepairVideos .have to check that out but no black smoke it is not losing oil it is driving good and strong not smelling no fuel. I recently replaced the spark plugs,air filter,oil and oil filter. I used the same spark plugs that the owners manual has.

[@fleettech3570]

@@OnlineAutoRepairVideos can a bad coolant switch cause excess gas use.

[@evenhand7743]

I need to get me a autel

[@OnlineAutoRepairVideos]

For the price ($89.00), this thing is definitely worth it!