1999-2004 Mustang Cowl Vent Cover - Install (SN95, New Edge)

[@Petergalvan]

I have watched several other videos on this subject and this is by far the best!

[@latemodelrestoration]

We appreciate the kind words!

[@megatrends]

Replaced mine a couple of years ago, very easy to do.

[@vulture8878]

I like the video. I would however like to see more restoration type of parts for the New Edge Mustangs. I do understand that the platform isn't all that old as of yet, but it can be difficult to find parts that commonly wear quickly. Salvage yards are an option but the problem is, the part you find to replace your worn or broken one is just as old or older than the one you're replacing. Thanks for the hard work. You guys are great.

[@latemodelrestoration]

Justin Merrell Thanks. We will for sure be doing more 94-04 Restoration videos in the near future.

[@texmextu2]

Lol wow.. that was so easy.. I was wondering how I was gna change this thing out.. broken just like mine same spot

[@Bringmecates.]

Great instructions thank you LateModel!!

[@razor12337]

this video was very helpful now i can do it my self and save me money by doing it myself

[@budman1072]

That video helped me do 2 things remove wiper arms and hood cowl thanks

[@latemodelrestoration]

Glad we could help out!

[@budman1072]

@@latemodelrestoration thanks for the reply i just subscribe to u r channel i hope i can get alot from u r videos i will che k them out thanks again

[@paulvelez6824]

hopefully you guys start making quarter pannels for coupes and convertibles and other parts for these models i would totally buy from you guys

[@Kojiro3210]

Jeeze, the wiper arm removal looked more complicated than this xD. Thanks.

[@wesleygolden3985]

Any luck I’m trying now

[@rayblanton3398]

thank you. that was easier then i thought . the push pins or not that easy to get back in but thanks

[@latemodelrestoration]

You are very welcome!

[@justinhughes6840]

Great instructions, maybe a video with the full process on othwr products along with a brief video like this would be good.

[@donquixote...]

Finally got around to changing mine on my 01 mustang. The thing just disintegrated when I took it off. But I didn't see 6 clips under there, hmmm...??? Consequently, it doesn't lay completely flat onto the glass...

[@Fools_Requiem]

Is it really that easy to remove the wiper arm?! Holy crap.

[@donquixote...]

Yeah, literally just pull out the little pin...

[@thatdudeinredandblackcodyj8313]

I have a busted oil pan and transmission pan I would like to know how to replace.

[@dahaka369killer]

Kmember installs, exhaust, plugs, coils, heads, and everything else lol

[@latemodelrestoration]

Thanks for the suggestions!!

[@susheelover]

I have a leak on my driver"s side floor coming from the front. I have looked and looked and cannot find a video or pictures on any forum that deals with fixing the leak. I imagine that the drain cowl is clogged by leaves and/or pine straw, BUT WHERE IS IT???? If you could do a video about this, I am sure many many people will benefit! thank you!

[@latemodelrestoration]

Erich Coleman Once you have the wiper cowl removed you should be able to spot any debris that could potentially be contributing to a leak. -Landan

[@susheelover]

Thank you for responding...I did see some leaves, and I removed them. What I cannot find anywhere on the net through, diagrams, forums and KZbin is EXACTLY where is the drain plug on the 2001 Mustang? Do I need to take out the wiper motor to access it. I am in Florida now and it is raining almost everyday, so I am very close to paying someone to take care of this, but I would much rather do it myself.

[@jdigitalseven7]

This is late, but have found possible fix....if you take carpet up and put silicone sealant against the edge of lower door, it should protect from most water coming in. I believe it drains from front to back and water exits drain in front of rear tire. if those seams don't have sealant, water can leak through on trip to drain. I think originally it was just welded and thought to suffice...but some need that seam by door caulked with sealant. Best advise is try to deal with seatbelt torx screw first...mine was so rusted and I had to soak it in liquid wrench...that should free carpet (along with quarter panel)enough. Back seats should be removed too.

[@johnvon7404]

Erich Coleman did u ever figure out exactly what was causing the water leak? I have a cracked cowl cover and wondering if that is my issue. My leak is coming from under the dash which drains down to the driver side and sometimes the passenger

[@OTWKilo]

Is this the same process for 96-98. We never get any love

[@latemodelrestoration]

We have a dedicated video for that year range. Check it out below. -Landan kzbin.info/www/bejne/qWnah4h8rKlmaNE

[@MrAwsomeshot]

is there suppose to be tenension once the two ends are in place? I tried putting mine in and after I pop it into place on driver side in order to get wipers to line up I have to put it under some tension.

[@John.A100]

Awesome.. Thank you

[@fiestasiphil]

Love your videos you post theres so many bits i need for my 03 GT but i live in the uk and latemodel dont post to the uk :(

[@michaelcalderon7188]

My 2002 mustangs is all cracked up. water keeps getting in the engine and wont start up. Stupid question but is the cowl the reason why water keeps getting in? And if so where is a place to get one for cheap? Please help!

[@guillermo2928]

It’s the same procedure for 98 mustangs?

[@slowjamcdub]

About to have to replace this and I’m definitely not looking forward to it.😂

[@JESUSISLOVE7777777]

Think you can do a coyote swap on a v6 new edge?

[@latemodelrestoration]

kendrik hobson This is completely doable! Check out our Coyote Swap project in the link below. You would follow the same basic steps but you would need to add a return style fuel system and 8.8 rear end. www.latemodelrestoration.com/products/Mustang-Coyote-Swap-Project

[@ivycelestine8919]

My pins aren’t snapping in. Do I open them up or what

[@latemodelrestoration]

Yes, if these are not snapping into place you may open them up a tad to get them to hold.

[@jacotube25]

Where is the cabin filter for an 99 v6

[@latemodelrestoration]

It doesn't' have one. -Landan

[@jose.corona]

Is the same procedure for 05-09 mustangs?

[@latemodelrestoration]

Jose, the removal and installation steps are different than an 05-09 Mustang. We currently do not have a tutorial for that year range. -Landan

[@WiseUpRiseUp42]

Does 99-04 Mustang GT have cabin air filter ? Can y'all help

[@latemodelrestoration]

They actually don't have a cabin air filter

[@WiseUpRiseUp42]

@@latemodelrestorationthanks LMR would you guys have clue to why my ac wants to give out when i drive with it for about 20 mins and almost turn off my car, likes the ac is forcing itself to work. But when i dont have ac on its perfect

[@latemodelrestoration]

The best thing to do is take it to a local shop or performance shop and have them look at it. They'll be able to diagnose the issue.

[@WiseUpRiseUp42]

@@latemodelrestoration thanks i will do that im ordering some things today too from LMR love you guys

[@santiagomelendrez5175]

99-04 cobra IRS urethane bushings install

[@JeffreyJimenez]

Thanks for the suggestion. If we can work that into filming schedule and find the right car we will try to get this filmed for you.

[@santiagomelendrez5175]

You can use my cobra lol

[@Chinesefoodrocks1521]

Why do you guys charge so much? It's a molded piece of plastic.

[@latemodelrestoration]

Chinesefoodrocks1521 Our price is based off of several attributes. Unlike cheaper 2-piece designs, this cowl panel is 1-piece and offers superb fit and finish.

[@boto8309]

Tony K supply and demand

[@headshotlouiebfm5698]

Late Model Restoration it is trash !!!!!

[@donquixote...]

@@headshotlouiebfm5698 Oh, come on, if you bought the car new like I did, you haven't had a car payment in over a decade. So it's pretty cheap... Well, if you insist, you can always go buy a new one for $38k...

[@headshotlouiebfm5698]

Don Quixote trash!!!!!!

[@santiagomelendrez5175]

Jeffrey Jimenez, you can borrow mine..lol 01 cobra with IRS

[@sketchybrownn4898]

Do you do game reviews? Lol you sound like JWittz