1999 34 Venture Center Console Rewire Restoration Part 2

[@grumpysailor8132]

Your wire looms were impressive. Loved the meticulous attention to properly laying out and attaching so they were secure. Sign of high quality work!

[@BornAgainBoating]

Thank you! Having nice bends and rolling extra wire into a circle helps to take the stress off of the wire and makes it last longer :) To many times I've seen someone have a problem and it's because of the rigging just hanging there and over time all that pulling from the wire bundle, pulls the plug off of something and sometimes messes up the plug :) Those are easy fixes though :)

[@AchikSarih]

Thank you, my brother, for this distinguished work. Thank you very much and more than that❤❤❤❤❤❤❤❤❤❤

[@BornAgainBoating]

Thanks for listening

[@fachu2]

Wish I had that much room to work on my wiring. Great job you guys, its come up great.

[@bobbruders1805]

You do great work, if you explain what the different components do and how they will make the experience more safe and enjoyable.

[@lb7wade518]

Wiring looks great!! Good job!! I like the attention to detail on running the wires.

[@xBeN152x]

Looks great!! Takes a lot of time and patience to do this kind of work more of an artist! Y’all did good on it nice and neat like every boat should be!

[@BornAgainBoating]

Thank you!

[@jimmiefarris4218]

Gentlemen, you do amazing work.

[@DonWallwork]

Great videos! I want to mount electronics on the inside walls of my center console without any screws penetrating. Do you have any videos on how to build up something like that?

[@BornAgainBoating]

Hi, This is Rose, I help Aaron with the comments, thank you for commenting! Unfortunately, I don't have the answer to this specific question. These are better answered personally 1 on 1. This is why we created a channel membership that you could join where we answer these kinds of questions on a weekly live! If this interests you, all you need to do is click the "Join" button next to our channel name :) Thank you! Here is a video that might be interesting for you though, idk if it will work for your situation though: kzbin.info/www/bejne/npWkq4Rsg512aas

[@FishOnForte]

Great job guys always top notch!

[@BornAgainBoating]

Thank you @Fish On Forte we are getting close to being done! We've got about 2 days worth of work left and then we should be going in the water and checking everything out. 😁 you know, looking done steering leaks and such lol

[@jonathanharrington9648]

I wish I had the money to pay a pro to clean my wires up like that but I'm stuck doing it myself

[@leonardcantrell5662]

I like the wiring, neat, I like it all. Great Job.

[@BornAgainBoating]

Thank you!

[@philipparker9015]

NICE TIRCK - Going forward, then backwards when you get the hole saw to the glass so not to destroy the finish, then forward again. I'm gonna use that one.

[@flywelder]

After watching these videos, which are great excellent! I'd like to know what it is what is the product you used to fill in all those old holes in the console you used a paintbrush and filled in the screw holes with with it. Also I see you using large umbrellas several times to block the Sun, those look amazing, and where do you get those? Are they really available where you're at? Cuz I don't see him readily available where I'm at. So I'm asking so that I can narrow my hunting field. Thank you.

[@ryanuhazie]

what is the purpose of the masking tape when making a jigsaw cut in fiberglass? Thanks

[@liorecitbon9464]

Great job!!

[@BornAgainBoating]

Thank you!

[@danklijn3267]

At first i thought that wiring is a mess what are they doing, till i got to the clean up part lol 👌👌👌

[@ktodman3449]

Good job

[@MrSlappy00]

what goes into switching to digital shifters and does it matter which shifter you use?

[@BornAgainBoating]

There's a lot that goes into changing to digital. You need a digital engine to start with, and them all the rigging! So your basically repowering and changing out all your rigging to get to digital

[@andersonperezarias8614]

Good video

[@BornAgainBoating]

Thank you!

[@abacodan1]

Curious as the video does not appear to reflect location of any master breake/distribution panel. I have the same vintage Venture, and it relies on the breaker switches, rather than having a master breaker panel. I assume you stayed with that configuration, but wondering if not, where you located a new panel?

[@BornAgainBoating]

No, we moved the fuse panels to the sb inside the cabin so that they are easily accessed

[@BornAgainBoating]

We had a hard drive fail and lost all the footage to the end of this project :(

[@brianwright874]

Is there a method to laying out the electrical system like that? Mine looks like a "Cluster Fu@k". lol

[@vmonroig21]

i fiilled up my boat and the heat made so much pressure it leaked out the fuel fill cap and into the bildge about a half a gallon in bildge i cleaned it out. do you think it could of messed up the tank? or should i pressure test it ? the fuel fill cap is the kind that vent thru the cap ?

[@BornAgainBoating]

Oh that sucks. No the tank should be fine, keep an eye on your float switch and the bilge pump though because the fuel can warp the float and make it sticky :/

[@vmonroig21]

@@BornAgainBoating ok thank you .yeah I was worried the bilge pump was gonna turn on and blow up lol.

[@brian.coastal.landscapes4456]

Surely you can make a few minute video of the finished boat, walk around video.

[@nowsath5570]

Generally how could be measured transoms height for boat, different size big or small or medium.Tell me explain how could be measured and mark it,fix the engine.

[@skullhart]

Part 3?

[@JBeckindy]

Did i miss the other videos on finishing the 34 Venture?

[@BornAgainBoating]

@Jeff Beck no, you didn't miss the last video. We had some hard drive failure issues and a ton of the footage was corrupted before we had a chance to get the video together. We are working on a video to go over the boat and probably make a fishing trip video on it and about it to show it now that it's done, but haven't gotten to get that done just yet. :( It's on the list for this years plan!

[@davids970]

Do you need a marine hvac guy. Been at same company for 12 years. Looking to move south,I'm in nj

[@BornAgainBoating]

Not right now, we've got an HVAC tech at the marina currently, but you maybe in the future, you never know! ;)

[@joelm.6900]

Where is part 3? I cannot find it.

[@BornAgainBoating]

We had a hard drive fail and we lost half the footage of the end of this project so we didn't get to make a part three :( maybe someday we'll put another video together to kind of show the end result of the boat. We use it a lot on the channel in our other videos though so youll see it quite often

[@joelm.6900]

@@BornAgainBoating Dang it. I was really looking forward to seeing the end result. Ill take a look at the other videos. Keep up the good work. Thanks

[@Grottolova]

What was the budget for the Resto? If it's ok to ask.

[@BornAgainBoating]

I'm not really at liberty to say, but I imagine if someone paid to have this done, it would probably cost well over 50K!

[@nowsath5570]

How to fix oil pump adapter in Mercury verando 350

[@BornAgainBoating]

Here is how to change the oil pump seals : kzbin.info/www/bejne/epbWf2CNeLOcjsU

[@matthoskin3572]

Great job but was this done for Betsy Davos's new yacht?

[@kennethshook2564]

Love the videos But I think I heard the background music playing on the radio I think it was WGAY

[@BornAgainBoating]

Haha thank you! It's possible, between the forklift, other techs, clients, boat detailers and wiring companies, you never know what you are going to head lol

[@miken2686]

Was this series ever finished?

[@haydensapp8008]

Mike N idk that’s what I’m here to see

[@brianwoodard233]

Good job . THE musie is getting old ! I like the name very much !!!!!!

[@BornAgainBoating]

Thank you! :)