1999 Land Rover Freelander 2.0L Diesel (XEDI S-WAGON) Clutch Replacement

07376369067
www.williamsmo...
Support the channel:
www.paypal.com...

[@WMCS]

www.williamsmobileclutch.co.uk 🇬🇧 Submit enquiry for a clutch replacement cost and availability. Thanks for watching ..

[@stuartwilson4016]

100% respect for you kevin out all weather any location on your back defo a grafer great work👍😎

[@johnrumble424]

how many times Ive thought about when I get to a bolt that won't come out and have to remove three to get to the one. 🤬your patience is admirable. such a hard clutch to do. love watching, total admiration.

[@markwilliams2830]

Kevin I award you a First Class honours Degree in Patience 🏁📜

[@andyellis307]

That has got to be one of if not the hardest clutch Ive seen you do Kev. And I have watched you do alot lol

[@GASolomons]

Halfway through and I would've simply walked away from this clutch and give the customer a lame excuse like my grandma suddenly passed away or something similar. Faaak! Hey, but it's TEAM KAW and we never say die.

[@FIXCOMPUTER]

GOOD JOB BRO, CONGRATULATIONS FOR WHAT YOU DO

[@dswear19]

Oddly Enough, I'm Doing A Clutch On A 1999 Freelander Tomorrow. Thanks For Posting This Kevin. This Will Be A Great Help For My. Wicked Clutch Video As Always Mate.

[@markmawson1]

All starter motors should be like those Rover starters because you can take the end plate off the solenoid and clean all the pitting off the main feed to the armature when you get that dreaded click when you go to start your car, certainly when you keep operating the ignition key and it eventually catches and engages the starter. On all other starters they are a sealed unit so when they play up it's a throw away job and get new.

[@amdjafx3]

Very good mechanic I might say. Keep doing what you do! Maybe do a voice over to help the do it yourselfers out there. But all in all good job

[@richardcentella2640]

Excelente video, y un lindo trabajo impecable 👍 👏 saludos de Puno. Perú

[@dariuszszotkiewicz8573]

👍👍👍good job great repair

[@maverick507]

👨🏽‍🔧🚗 number one 🏅

[@brunoklein4632]

Alright, good work everyone and have a great week.

[@richardwallace4509]

Hi that was worth knowing the lowest I've been in my Freelander is 15 miles left . Don't want to damage engine.Always try to have quarter of a tank left .

[@Pera-Peric]

*6:16** is the gearbox and MTF 94 oil is poured there ?*

[@bucksmkr12ga]

Do you take extra parts with you to the job, like flywheel, axle seals, etc.? Or do you make a parts run mid repair? Are there any rear wheel drive vehicles in England?

[@RGV2300]

I think he buys them beforehand. There is a clutch replacement vid about an audi or 350z in his channel, i can't recall well.

[@gpk6458]

Mainly BMW are rear wheel drive these days. There are some on the channel.

[@OsmanGaziPasha]

Thank you

[@madalinionut4883]

nice job mate

[@robertnagy2456]

This is the real sportgymnastics.

[@scotspie501douglas7]

OMG major stripdown for a clutch why would you buy one of them and iff th ball joints downt come off or are worn extra expense

[@jayswin2]

What make is the universal joint you use on your impact wrench?

[@gegegege7823]

Toujours aussi pro 🍻🍻👍👍

[@maxthecaddy8451]

and that's a thumbs up from me buddy 👍

[@raitshots]

Good model esay variant rebuild 😎 👍

[@WMCS]

This one was fairly straightforward.. but can be quite tricky with the exhaust version running underneath the engine

[@raitshots]

If it could be. Without lift

[@raitshots]

Nja view Rover car old oil Not time renove and result small dust metal aluminium Fixsed gear box cluc. Regular renove old oil engine and gear box people. Long time drive not problem gear box and cluc. good oil gear box engine. Other model car. Reductor remembered oil old renove. Another car model renove oil 10.000 ___250.000____500.000 km info your car model 👍. Old Black oil not good long. Real oil small micro dust metal aluminium real (grinding)

[@arturn7520]

Świetna robota , ile czasu rzeczywiście zabiera panu taka naprawa . Pozdrowienia z Polski

[@costelciotoru8945]

Hola Amigó me gusta tu vídeo un saludo des Madrid 👍

[@Phil-1969]

That's an early one , I can see the propshaft has gone , I take it the transfer box is knackered

[@WMCS]

That’s the easier early one. The model after that is a right pain the one with the exhaust running underneath the sump.

[@amdjafx3]

Do you have videos on an Acura RSX? I hope you do so I can use it for guidance before I tackle the job. Thanks

[@RoadRunnerMeep]

That's a hell of a sump guard. What angle grinder blades are you using?

[@JuanFernandez-ej3xu]

Que bueno como dominas tio

[@WMCS]

Thank you.

[@agaticdaniel]

Hard work 💪...👏👏👏👏

[@BluesonichdUk]

you would think when they design these cars they would make it easy to get to these parts 🤔

[@TOMLINBISH]

Some Vauxhall Cavaliers from years ago could have the clutch replaced with the gearbox in situ although I think this was probably just the friction plate!

[@Phantom-mk4kp]

@@TOMLINBISH Nope, whole clutch. I did it on my father's car. Total wrenching time about 30 minutes. Remove 1 wheel, undo an inspection cover and withdraw primary transmission shaft. Remove cover on lower of bell housing and after sliding on 4 retention clips to hold cover spring pressure. Undo clutch cover bolts and the whole lot slid out like a CD from a player. But that was when designers had held a spanner before, not just graduates who are good with a mouse.

[@Traderhorn]

Astra in 1980’s was the same.

[@MIdaffy502]

I bet this job would be twice as difficult if that vehicle was operated in the state of New York or Michigan. The corrosion !

[@Freelandrew]

Its in great condition, except the leaks .. which is usual in any land rover

[@WMCS]

The body work was mint. For any landy enthusiast will know this engine. Is bullet proof.

[@chrismills9346]

It not it had the rover diesal in it not the bmw early engine that was Good

[@colinmyers8841]

hi Kevin , greetings from sunny Queensland AUSTRALIA , ?? would this be the landy,s first clutch replacement , cheers mate

[@jeankimi6446]

Bravo 🤙

[@colinmyers8841]

whole issue caused by sticky clutch lever , should be a service lube point eh!

[@19mert68]

Having stripped it all down, I found the leaver to be almost solid

[@JuanFernandez-ej3xu]

Me puede decir cómo cambiar soportes de transmisión de frelander 1 td4 cambio manual año 2005

[@WMCS]

It’s all here on the video.

[@JuanFernandez-ej3xu]

@@WMCS yes

[@tmicor7092]

👍👍👍!!!!

[@sebastiangarcia3301]

WHAT IS THE PRICE OF ALL THAT WORK

[@ferreiramiguel2910]

the Rover Discovery William that teacher with always cordial greetings from Argentina says that during the day he is in his uniforms and at night he is a London dandy he would be a London boy

[@arturos571]

had the glittery oil......ut oh

[@colinmyers8841]

to Phil 1969 ,,,,DOH!!

[@xoancabado]

that looks like a pain in the ass job

[@tonyju4729]

🙋‍♂️👍

[@furqatabdujalilov8346]

👍👍👍👌👌👏👏👏👋

[@JuanFernandez-ej3xu]

Hola hablas español

[@rolandnagy6118]

hali igy kuplungot cserelni nemsokmindenki tud

[@massihappy8387]

Work well in any country please

[@stefandiesel9218]

13:22 What a small Oilfilter! It is a Joke!!!!!