2011 (TD4) Land Rover Freelander 2.2 XS (4WD) Clutch Replacement.

[@WMCS]

www.williamsmobileclutch.co.uk Thanks for watching. Really appreciate the support 🍻

[@tommo838]

Brilliant I will request a quote ideally I'm thinking solid fly wheel and stage 1 clutch

[@markt5426]

Hi Kevin, I see that the Land Rover gave you a few surprises the water which was trapped in the chassis leg. Also a lot of components to remove just to gain access to the gearbox. The 13mm short bolt just in the recess underneath the starter motor seems a pointless with all the other bolts securing the gearbox.🤔 But again with total precision you removed the box. It look like the clutch has been slipping for a while seeing the surface of the DMF facing and dust within the housing area. I think the look on your face once you got the box allocated back in was a sign of relief, my God I was thinking the same.😉 That's a heavy unit to pushing and turning at the same time. Again, you have demonstrated your skills and expertise within this field and anyone who requires a clutch fitting service within the demographics of Kevin's area should contact him with no hesitation whatsoever. Well done mate, an excellent job carried out. 👍👍👍

[@WMCS]

I did wonder why that shirt bolt was there. But looking through the video footage I think it’s to hold that plastic cover in place. The gearbox was heavy. And if you notice I had to put the wheel back on the other side so that I could spin the driveshaft so the spline could fall in place for the gearbox to slot in. But all in all it wasn’t a bad repair. It was a perfect day for it.

[@liamabrahall]

😢ceigtjritrrorttkttk5tyr5trrejrrur55xi3f

[@frfrpr]

The filming and editing here is some of the best you can find on KZbin. Top rate filming shows top rate work. This is impressive. Thanks

[@northerner1374]

Legend! I bet any land rover technician would take their hat off to you doing this job without a ramp! 👏👏👏

[@griffincentre]

Fair play bud I do this in a workshop. Your core strength is amazing full respect 🙏

[@WMCS]

www.williamsmobileclutch.co.uk Thanks for watching. And really appreciate the support 🍻

[@MrGoldman9]

In a very simple word you are the king of heroes and craftsman and I would like to add one more things which is the professionality of the camera angle spot During the works it is basically like a school for learning for any beginners or interesting thank you so much for sharing this great full job very high professionality short time leaning on your back fix everything God bless you please keep filming educating the future showing Entire the world what you can do by only leaning on your back on the ground thank you So much I can watch your video for ever so proud of people like you

[@ROGEXTREME]

Great work Kevin, your channel is a great encyclopaedia of car clutch work. Not many you tubers work this hard and make such great videos. Thank you.

[@WMCS]

Thank you for the feedback mate. Means a lot.

[@sinanmehmet2038]

Loving the video's! Did a freelander 2 today on my back, normally drop subframe out on a ramp but did it like this on the floor, made it pretty simple and I actually enjoyed it, thanks again for the great content, your a legend

[@rturner1321]

Absolute fucking legend. Inspiring work ethic and attention to detail. Kevin you are a credit to good mechanics worldwide.

[@cjthomas838]

Amazing strength and skill, top job job aswell, ive got one of these to do tomorrow so came on here to recap my memory as not done one in a while, glad i did cheers

[@Pauliezz]

This guy is a tough nut,not easy what he does,and very expert too,well done,keep up the great work.

[@ivanleo3344]

ciao , non ti conoscevo , ho guardato sino in fondo il tuo video davvero molto esaustivo , peccato che non siamo vicini . Un servizio questo a domicilio davvero azzeccato . Complimenti , bravo

[@WMCS]

Thank you Ivan 🍻

[@sammytheseal2307]

I really do salute you! Having done one of these in a workshop it was bad enough for me to not want to do it again. But on a mobile job!!! That's another level well done sir :)

[@WMCS]

Thanks for the feedback sammy.

[@ensamvarg1974]

You make excellent job and thanks for sharing it. It's a pleasure to watch it all the way through.

[@gixxercorona]

Brilliantly done kev , that’s a major job on its own , hard graft 🍻keep up the good work

[@WMCS]

Thank you.

[@jamessmith6402]

Great job the amount of effort you put in is amazing to watch 👍 thanks for sharing

[@bigbill74scots]

Absolutely detest doing these. I always try and price myself out the job. Well done mate for how you handled it, even with a ramp and a strong apprentice it's no fun at all. Huge respect 🙏

[@richh1452]

Great video! I am going to have to do the wife's Freelander 2 clutch this year so this video will be perfect. Just done my son's Mk5 Golf clutch and that was a doddle, I think this will be more challenging 😁 Fortunately I have my own 2 post lift which will definitely help. Really enjoy watching you work Kevin 👍

[@rmgbgt]

Brilliant video. Thanks for sharing it. Not as strong as you so had to use a trolley Jack but the box went back in fairly easily.

[@kurts8499]

Hi Kevin , thanks for the brilliant video it really helped my do this job on my07 fl2. Without it , it would of took me much much longer . You make putting that gearbox back in look so easy fair play mate it wasn't as easy for me on my own . It's a bit like the d3 starter motor only goes in one way! Done about 7 hours today and GB and starter all on so not much left . These landies ain't so bad once you work out how to get at everything. I also have the d3 and I thought that clutch change was involved think I prefer doing that one now ! Wouldn't mind seeing you do a d3 clutch and flywheel also if you get a chance. Thanks again much appreciated for the best video out there for this job 👍

[@WMCS]

D3 really straight forward. Just a bit heavy on deck the transmission is. I use to work for Land Rover stratstone a while back.

[@kurts8499]

@@WMCS with gd jack and high axle stands d3 lot easier to manoeuvre in , I get on back and use all 4s straight up and on much much easier. This side exit for the fl2 had me f in and blinding much more awkward. With the d3 TC off there not much in it weight wise. I had a feeling you had worked on landies before , how you know your way around that fl2 haha . Right I'm back at it this morning again thanks for the video it was priceless 👍

[@alexandre_fraga]

wow, yes this is hard to see many details, one thing i always see in your videos kevin like the weather is almost always cloudy and drizzly.... which is boring to do in open space .. but you manage very well very professional

[@jimbo9800]

You da Man - looks like it hadn't been changed ever - Thumbs up Excellent Camera work

[@joe27979]

Great vid, thanks for taking the time to get some awesome footage 🍻

[@alexbowie6316]

That was a fearsome job with some amount of filming too. Deffo a job and finish!

[@classicmechanic9824]

Super job you are doing mate. I bet lots of mechanis refuse to work under the conditions you are doing. That Land Rover box looks pretty heavy to work with.

[@maxthecaddy8451]

this is a big job to do on the Freelanders, but just a walk in the park for Mr K.A Williams, thumbs up buddy👍

[@WMCS]

It was a heavy box. But the layout of the repair was quite straightforward

[@maxthecaddy8451]

@@WMCS straightforward lol, mate you deserve youtubs golden wall plaque👍

[@mrmusicmanic]

Exactly what I do, connect up the hydraulic system and bleed before putting it all back together 👌 make sure it’s good.

[@WMCS]

Same procedure as here. Repeat

[@scotspie501douglas7]

once again Kevin great video no way would I buy a land rover so many parts to strip OMG and the cost if the parts

[@J.Manuel.]

Perfecto kevin, eres todo un profesional y aún más sabiendo que lo haces todo a pulso sin gran maquinaria , un 10 👍. Sólo una pregunta . Que clase de grasa es esa que sueles hechar en el hueco de los tornillos? ? ?

[@stefandiesel9218]

33:51 what a massive 2 masses fly wheel!!! it looks like a birthday cake!!!!!🤣🤣👍👍

[@WMCS]

It weighs the same as a baby hippo 🦛

[@stefandiesel9218]

@@WMCS🤣🤣

[@Zafarrantxo]

great job where once again you demonstrate your skill and great professionalism thanks for sharing it with mechanics fans and admirers of your work Did you tell me that the rav 4 had to be done with the engine out? thanks again

[@WMCS]

That is correct. To be able to fully access certain bolts. But only on the 4x4. The regular 2 wheel drive can be done on deck.

[@pescariaeaquarismo]

I'm also a mechanic here in Brazil and I know how tiring this job is! God bless you always brother! I watched the video until the end! really this car is terrible to handle because it has many components... how many hours of work did it take?

[@sheepdogman1]

Excellent video. I need my wife’s freelander 2 clutch doing asap and after seeing this it maybe out of my league. I have done discovery 1s and defenders but this looks a lot more awkward. How are you fixed for a trip to Shetland?

[@oleggorbatenko1618]

Outstanding work. Thanxk you so much!! Cheers

[@faicaldz524]

nice work man god bless you

[@antonio-losqualo7014]

Complimenti Kevin 🔝🔝 Ti seguo dalla Sicilia 🇮🇹 Ciao 👍🏻

[@WMCS]

Ciao..🍻

[@igorandrearuberto7517]

Vieni a lavorare qui in Sicilia dal mio meccanico che cerca uno bravo come te 👍👍👍

[@BeavisPits]

Great video! My FL2 clutch is starting to slip. I usually do all car work myself but this looks like a major job and something I’ll leave to the professionals. One question, I’ve heard that a seal on the crankshaft end should be changed too but I couldn’t see this in your video. Did you omit this part?

[@TheMostonian]

Excellent job. Is it the same process for a 2015 Evoque SD4 ??

[@suichoryeung8869]

A real superman. Superb !

[@eszekiistvan7953]

👍👍👍👍👍👍👍👍

[@stevemainwaring7598]

Hi Kevin, great video and good work, who supplies the clutch parts you or the customer please

[@royman8889]

Hi Kevin, Superb video, I'll be contacting you to do mine if I can. The only observation which supprised me on your video was you never used a torque wrench to tighten up the fly wheel or clutch plate to the correct torque or in sequence. Did you replace the oil seal on the drive shaft while the gearbox was out, didn't see that done on the video? Never the less, great job.. You must have three shredded wheat every day!

[@mrmusicmanic]

Did my apprenticeship on axle stands and no hoist, 25 years later it would kill my body going back to this, fair play to you can awesome job, I subbed 👌 how many hours did it take u ?

[@WMCS]

About 4-5hrs incl filming .. thanks for the feedback

[@Marcos9cosworth]

Hola Kevin! Sabrias decirme cómo sustituir el cilindro maestro de un freelander 2? No encuentro mucha información al respecto y todo apunta a que hay que desmontar todo el tablero para dar acceso al soporte del cilindro. Gracias de antemano.

[@vladimir_z68]

Молодец, большое спасибо за видео

[@JH-si9oe]

Brilliant video, you made that look so easy. Just out of interest incase my FL2 ever needs a clutch how much would that cost?

[@WMCS]

www.williamsmobileclutch.co.uk

[@millerctongs]

Videos are class mate ! Do you know instinctively what parts to remove to get access or do you figure it out each time you do a different vehicle ?

[@WMCS]

That’s correct. I get a feel what needs to come out and what doesn’t.

[@tommo838]

Currently doing mine as we speak can't lift the gearbox back in very heavy

[@leopoldosolasimon]

Muy buena la imagen y la iluminación 👍👍

[@WMCS]

🍻🍻☀️thank you

[@kervinwillmott2313]

Hi Kevin. Just seen this video and wondered if you could answer me a question, I noticed when you put the drive shaft nut in was the shaft up to the end of the hub? I recently fitted new ball joints and removed the bolt to the drive shaft to get more access, when I fitted the drive shaft bolt I noticed the shaft wasn’t flush to the hub. Is this normal ? The bolt was tight (it’s on a Ford s max mk1) thanks. Keep up the amazing work.

[@gregdelasavoie2105]

Hi my Friend... this car is very technic

[@WMCS]

A bit involved yes.

[@YaroslavTur-er6fq]

Чудова робота

[@ashsmith6397]

Can I replace the slave cylinder tube without removing the gear box ?

[@GlobalG4m3rs]

fantastic vid really wished u covered my area

[@WMCS]

Thanks for the feedback. Unfortunately we have to cut off at certain point. ☀️🍻

[@markmawson1]

Oooooh i spy the dreaded drain there, that and rolling sockets don't mix had it a few times, there is a drain close to where i work on vehicles and been a few times ive kicked or rolled sockets, spanners and screwdrivers down that drain it's not too bad recovering them with a length of 10mm bar with a neodymium magnet taped to it but with all the welding cutting and grinding i do when i drop a socket or something down there it comes back up with about 2lbs of filings before i retrieve my tool back lol

[@torquesteer2657]

What a job 👌🏻

[@WMCS]

Sure was., sure was 🍻☀️🍻

[@kennymack4012]

great work by the way

[@-DC-]

You make it look easy Kevin 🙂

[@WMCS]

That is the trick ☀️😁

[@LAMECCANICA-channel]

Super Kevin 💪🏻💪🏻💪🏻

[@soulvirtualshop]

What is the approximate weight of that gearbox?

[@WizzRacing]

Might need to send this guy a set of Koken Wheel Nut sockets...Some of the Vehicles rims cost more then my used Van...

[@WMCS]

🍻😁

[@MrMADOAL7577]

Awesome job.

[@WMCS]

Thanks and have a good day

[@vaux_wolf4281]

Hi Kev do JLR still use Ford engines or do they use their own now. Enjoyed the video but a lot to take apart 🍻Chris

[@saturn0745]

Hello, I watch your movies and I have a question, how is it that I have never seen problems with broken screws and other problems ... that something will break, it will break ... it never happens with you ... the shaft seal is leaking and then ... do you put it on ... you don't have it in place with you ... ???

[@WMCS]

You always have to burn the boat when you land on new shores. Then there is no going back. So to answer your question. Bolts won’t break if you use lots of lubricants and are patient with it.

[@saturn0745]

@@WMCS tell me what has patience and splashing the heads of the screws that enter the slings ... as soon as you feel like the nut is torn off and turned inside ...

[@saturn0745]

the same with shaft seals ... as I can see that the dust sticks around, I replace it, not to mention how to glass the oil ...

[@kennymack4012]

what would be good i think if you stated how long each job took

[@carlgrenfell4725]

How much should I be looking at to have my cluch done on my freelander 2 td4?

[@RichardFrost800]

Great job.

[@WMCS]

Thanks for the feedback

[@tommo838]

How much to replace clutch on my 2007 freelander 2 2.2td4

[@rachels4039]

Freelander🤘👍

[@WMCS]

That’s it 🍻☀️

[@Работаподождет]

ты просто профи

[@chotuusian4127]

Good work

[@WMCS]

Thank you.

[@sp2181]

Looks very time consuming compared to a vw. You made it look easy.

[@WMCS]

Definitely a lot longer and more involved being a 4x4

[@sudinebabz8651]

Super 👍🏽

[@TheSillus]

Hope you get well paided

[@WMCS]

Cool 😎

[@Charles-wh5tg]

👍👍👍

[@olegsedov9590]

Super!!!

[@WMCS]

Thank you 🍻

[@kamar317]

Salut mec,tu pourras nous donner le Kilométrage des voitures que tu fais?Merci

[@ianjeffery3762]

Saving up so I can get Kevin to replace my clutch.

[@ianjeffery3762]

infact it started slipping tonight, so ill be on the phone asap to Kevin

[@LordClunk]

How long did it take to do this one?

[@WMCS]

If I wasn’t filming I’d say a solid 5 hrs

[@javieralvarez9146]

👏👏👏👏👏👏👏

[@WMCS]

🍻🍻🍻🍻

[@mustafakoroglu8144]

Hallooo kevin number one good jop🤗

[@manuelpinho7601]

👍

[@WMCS]

🍻☀️🍻

[@gegegege7823]

🍻👍👍

[@tommo838]

Done

[@SuperCochiloco001]

He should pay minimum 4 times more than random price

[@ROBERTO19690202]

Coś z Twojej branży. :) Nie mogę się nadziwić ze sposobu regeneracji kzbin.info/www/bejne/i5qxp6KHgaqsfrs

[@TheCramunhao666]

bom

[@maxsmith-or9so]

!!!!!

[@brunoklein4632]

✋💪👍

[@WMCS]

🍻🍻🍻

[@gregdelasavoie2105]

First

[@WMCS]

Excellent thank you 🥇

[@cirkin2876]

🙋‍♂️🙋‍♂️🙋‍♂️

[@WMCS]

🍻🍻🍻☀️

[@simonmorgan7981]

Typical land rover rubbish