SOLVED Low speed ABS activation Chevy Trucks

[@1AAuto]

√ *Watch the Video* √ *Buy The Part at 1A Auto* 1aau.to/m/Visit-1AAuto √ *Do it Yourself* √ *Save Money*

[@erickosolismartinez9523]

Just change front brakes pads and speed sensor on 2005 Tahoe LS and now abs, t/c and e brake light stayed on. As before the abs and t/c light would come on once in a while. Why does lights stay on now is my question?

[@1AAuto]

+Erick Martinez Solis We wouldn't be able to diagnose an issue like that here, you may want to have a local mechanic take a look at it. Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c

[@mudmaster3450]

Will this work on a 18 Chevy is making the same thing and noise ?

[@chrisslaughter5552]

Thank you it fixed my truck doing this

[@williehudson9125]

@@erickosolismartinez9523 ñnh5

[@MrGuille91]

I tried this and it worked on my 2005 Silverado (4x4)! I took my truck to the shop to replace the wheel hub from the passenger side. After I picked up the truck from the shop, the ABS activated at slow speeds. There was no light on the dash though. It felt that the ABS was activating on the driver's side. I took the truck to be diagnosed and they told me there were no codes. So I took it upon myself to check the sensor on the driver's side. I followed the instructions on this video. When I inspected the sensor I noticed that it was a little detached. I took it off and cleaned it real well. I also sanded the place where it went. I sprayed a little paint. After I put everything back together, I test drove the truck and the ABS no longer activated! Thanks to this video, I was able to solve the issue!

[@rbastien78]

IA auto treated this application with intricate detail. Not many mechanic shop are willing to engage in these crucial disciplines.

[@charinabottae]

Parts company giving repair instructions that didn't involve new parts... That plus how useful the info was (although a bit too detailed for me, could have been much) compelled me to give it a like.

[@1AAuto]

+charinabottae Thanks for the feedback!

[@peterdeboer2805]

That's how they got my like too

[@thomasbartlett6771]

I put a pair of MOOG front hubs on my 1997 GMC suburban K1500 back in 2019 and the ABS started acting up this month. After thoroughly cleaning the surfaces, everything worked fine. There was a shim on each side that I cleaned and reused as well with no ABS activity.. Thanks for the great post and advice.

[@patrickbaitman8336]

That piece you called a "gasket", "plate", then "washer" is a shim. Some have more or no shims at all. If you remove all the rust and the abs still comes on, try removing a shim or two. The O ring is the "gasket" that keeps out debris. Great videos!

[@flux_core_fx]

Thank you! Having this problem in my 2003 rape van

[@amandaloy9878]

You’ve just become my favorite person ever. Thank you so much for making this comment because I have been struggling for two months to fix my suburbans ABS issue. I am proud to announce that your comment is the reason why my vehicle is no longer kicking in the ABS when I come to a stop

[@Fuknorthcarolina]

Is that how you fill for the airgap?... do you know where to get them?

[@art1339]

You nailed it!! Took two shims out and it’s gone!

[@cavegardens4686]

Thanks for your supplement

[@jineshfernando917]

All thanks to your video I fixed my 99 toyota solara. Most of the Auto shops doesn't know what it was. And I spent lots of money changing wheel sensor, master cylinder and pads any many more. Once again thanks be to your video I fixed my car on my own.

[@mikeschmitz5263]

Worked for me. Saved me $200 and only took ~2 hours. Appreciate the help. 2007 Silverado Classic 1500, did not appear to have the steel gasket, works fine.

[@jwc3104]

This worked!!!! Fixed the annoying slow speed ABS false activation issue. On my Express van, ABS on passenger front wheel was activating right before vehicle comes to complete stop, pulling steering to left. Now it's fixed.

[@patrickpierson3467]

This is a great video for eliminating a small problem before you go and buy a $500 ABS module.

[@JoseMaan]

Thank you for this video 1A Auto I literally spent months trying to diagnose this issue. I replaced the booster, and the master cylinder until I came across your video.

[@SoaringMech]

Just did this on my 2006 silverado 2500hd. It worked😊. A couple of comments: 1. If the truck is old enough to have this problem, you will probably break off the sensor sleeve when you remove it. The plastic sleeve will break off and stay in the hole in the hub. Don’t despair. Use some needle nose pliers to pull out the sleeve and throw it away. If the sensor itself is not damaged, get some liquid electrical tape and paint it all around the sensor and it’s tip. Let it dry for two hours before you reinstall it. To make sure water doesn’t get into the hole, get some plumbers putty and spread it around the base of the sensor before you reinstall it. Finally get a lock washer that is just big enough to fit over the Allen bolt. This will make sure that the Allen bolt presses the plastic sensor assembly tight against the hub where you filed and sanded away the rust. I’ve had this problem on a 1995 Yukon and my 2008 Silverado. Both when the hit their 8th year on the road. Poor design my gm. Thanks so much for making this video. It will help many people.😊

[@1AAuto]

+sam washburn Thank you for the feedback! We love empowering our customers and showing how to perform DIY auto repairs with our high-quality auto parts. Your feedback may also help out someone else in need too!

[@guidomack79]

Okay so I've been following you guys for quite a while. I've been doing this 28 years and I cannot figure out this low speed ABS activation. It's usually when pulling up to a stop sign or a red light weather the steering wheel is straight or slightly turned the ABS pump kicks in and the service stabiltrack comes comes on the display. It is a 2008 Chevy Express 3500 regular cargo 6.0 l. I have replaced the front hub assemblies with new sensors and the two rear sensors with the AC Delco pigtail kits as well , I have also replaced fuses and relays just in case , inspected wiring to the module for the ABS and I was told that the only two things left are the steering wheel position sensor and the brake switch that could be causing this. Like I said I am a huge fan of you guys and hope you have more knowledge on this because I can't track down this problem that is freaking out the drivers in my fleet. HELLLPP

[@cedmac3366]

I have this issue on my 2005 Chevy Tahoe. I just pulled the ABS 60amp fuse and that fixed the problem. Maybe someday I will clean the sensor,,,but for now Im good. Also you said 100ft lbs pf torque for the lug nuts...Im pretty sure its 140ft lbs is the correct spec for the lug nuts...good video!!!

[@richr5971]

Well done video, always a pleasure to have a professional giving up his/ her time to make a video on how to do a repairs. Thank you..

[@DANNYO53]

Just replaced a faulty sensor on my 2003 GMC Savana thanks to you. My sensor was so stuck it came out leaving the sleeve and o-ring behind. I used a 5/16 tap to get a grip on the sleeve so that I could extract it by pulling on the tap with no damage to the bore. Excellent video! The problem is fixed.

[@1AAuto]

+Dan OLeary Thank you! We love empowering our customers and showing how to perform DIY auto repairs with our high-quality auto parts. 1AAuto.com

[@Ben-jq5oo]

One of the best presentations I've seen. Professional, concise explanation and excellent camera work. We need more presentations at this level. Thankyou.

[@kingfreedom1863]

You guys saved my life. Iv bin to the break shop 4 times and still didn't get it right 👍 . You guys rock

[@steveclaesson5443]

Great video. 2003 Suburban…needed to remove the shim completely to get it fixed.

[@MrKakabekajerry]

Had this problem on our 2002 silverado. Fixed it with this method for free! Thanks for the advice!

[@stevebasanyi4374]

That's perfect! Thank-you! That's the best, most detailed video I've seen explaining how to fix a commom problem.

[@rickmarcotte2386]

Just wanted to point out that if these are active sensors, they require a good electrical ground especially where the sensor mounting screw base metal collar contacts the metal wheel hub. Removing all the rust will resolve a poor ground issue if the issue is rust at the point of contact between the ground collar/ mounting bolt collar and the hub. Either way (active or passive sensor) always clean the mounting surface of any rust.

[@JoseLuna-xt1rz]

2002 Tahoe LS having pulsing when stopping at low speeds. I is not my front disc/brake pads I replaced those a year ago. I rather just replace the front abs speed sensors and clean out the abs hub. I am not getting any abs notifications via "Check Engine" light when it is on so sensors (oem) might be good but it is a 2002 so rather just replace it. Gonna follow this kat's video. Thank You.

[@TurkeyThugs]

Did this for my equinox and it still acts the same, probably just faulty sensors at this point, but this video did teach me how to locate the sensors, thanks.

[@christopherAwaite]

Update?

[@JoseCannizales]

Try resetting your vehicles CPU either by disconnecting battery or with a scan tool that’s able to perform such action.

[@SuperKanna777]

I bought 2 brand new hubs with sensors from you guys. Trick still doing the same thing.

[@ChrisB-cx6td]

@@NSDflug most gm trucks need a scanner to bleed the brakes for abs

[@mawage666]

Finally a video telling exactly everything I need and how to do it. Thank you!

[@1AAuto]

+Lukeamania Thank you for your positive feedback! We are happy we could help.

[@mawage666]

@@1AAuto I know you're supposed to do both sides but I was running out of time and only got the driver side done yesterday. About to go do the passenger side now.

[@10pieceflair]

Did it work?

[@alanrodriguez7341]

Great job!!!! I have seen that code cause the abs to activate easily when tread on tire achieves higher mileage and higher wear too. Scary. Instead of slowing down the vehicles wheel will shake and shudder.

[@mariomaddog3737]

Did exactly what you did I even replaced the sensor still have the problem any ideas

[@johnroederer6410]

Excellent job explaining this procedure and good camera work to see everything clearly. I learned a lot. Thanks so much...I think I've got the same problem that comes on at slow speed when I'm coming to a stop in my 2002 GMC Safari. Looking forward to more good videos from you.

[@mikemilam525]

Thank you for this. Mine started doing this a couple months ago and I've been thinking about it a lot. Sad part is, I just replaced the rotors, calipers and and pads a week ago and that would have been the perfect time. First decent day I will try this.

[@1AAuto]

+Mike Milam Thank you! We love empowering our customers and showing how to perform DIY auto repairs with our high-quality auto parts. 1aau.to/m/Shop-1AAuto-c

[@nickbriones6106]

Did you fix it yet and did it work for you ?

[@chrisslaughter5552]

@@nickbriones6106 I had same thing it started with a rusted dripping brake line then I replaced calipers hoses and mastercyclinder though I had no ABS light lite up on dash panel but after putting Master cyclinder on I have a ABS lite on and it going to the floor what is wrong with 06 Silverado I’m going crazy

[@tedbissonnette4984]

Thought this video and explanation was very well done. One thing is, I thought the surface of rotor that touched the rim is rusted, so I assume there is corrosion on the inside of the room. My preference is to clean the surfaces up also.

[@danrio8870]

Great video. We replaced the sensor, then the hub and still have the same ABS activation when wheel turns. Front left as well. For a 2008 Jeep Commander

[@VRD65]

Hi. Very informative video. I have my brakes that are randomly locking too fast, especially at very low speed, causing blocking the wheels, even if I push very lightly on the pedal. And sometimes, almost no brakes. My Chevrolet Express is becoming dangerous... Should this ABS speed sensors being the issue? Thanks for you help.

[@jordanmcclellan4059]

Awesome video! Our work truck has been in and out of the "shop" with this problem so my company finally let me work on it I just followed this video step by step and fixed it without many hold ups except the seized up caliper hanger bolts

[@1AAuto]

+Jordan McClellan Thank you for the great reply! We love to empower our customers by showing you how-to perform your own auto repairs while installing our high quality auto parts. Have a great day! 1aauto.com

[@alexbrosky3000]

I followed the procedure exactly to get rid of the constant abs activation in my 2004 Tahoe 4x4. I even used a couple spritzes of spray paint, as recommended. On the driver's side, I had the little flimsy metal gasket but on the passenger side, there wasn't one but the sensor was of a different brand (not sure if that explains it). I just put everything back together rust free and no more clicking. Liberal use of brake cleaner is key to make the cleaning easy of the hub and sensor.

[@tomclose6643]

exact same thing happening to me on my 2005 silverado ! thanks for video

[@stevieg4201]

Thanks for all you guys do, back yard mechanics are almost a thing of the past, but you guys are making us a bit more confident again, I’m glad I can wrench on my 99 Tahoe, love that truck. Buying parts from you guys is so easy to do and reasonably priced, thanks for all you do. 😎

[@MarkSchuster-ym3iy]

Excellent I’ve been looking for the reason my brake pedal gets soft right before I stop then kicks back when I need the brakes the most/. I’ll try this first thank you.

[@MA-rc2eo]

Hello, I'm a huge fan of your company, so could you please create a video about replacing ABS censor of 2002 Chevy s10?

[@bobbo7580]

Thanks for the info ended up being a bad hub but you pointed me in the right direction

[@kimberlybars9182]

Excellent video very clear precise and to the point thank you for your work and upload

[@Ben-jq5oo]

Same here. None of that um, ah, kinda, stuff. Very professional explanation and and excellent camera work. Thankyou.

[@dean97ss]

Thank you for this fantastic resource. It was very helpful. I will keep you in mind for any parts needs in the future.

[@KRedgrape]

Thank you so much for this video. I will do the same process because my ABS light comes on everytime it rains and I noticed that it came from when I sprayed my front driver side Tire it turned my signal on. So I'm going to be safe and replace the Hub and the wheel speed sensor. Thanks for doing this video and it was straight to the point and the video was clear

[@1AAuto]

+KRedgrape Thank you! We love empowering our customers and showing how to perform DIY auto repairs with our high-quality auto parts. 1AAuto.com

[@MA-rc2eo]

I learned so much from you thank you sir. I'll buy your parts. Can you please make a video for chey s10 ABS sensor please?

[@johnjesus971]

Installed two new wheel bearings from 1a auto, which come with new wheel speed sensors. Replaced rear speed sensors with 1a sensors. Still having the same issue

[@NTromb]

Absolutely awesome well here’s to hoping that that fixes it as my 2002 Chevy avalanche Z 66 had a similar issue and the brake light was just dying because the previous owner just disconnected the plug

[@marleymayfield2635]

Great video.....fixed my low speed ABS but wish I had a lift. Lol

[@1AAuto]

Thanks for checking us out. 1aauto.com +Marley Mayfield

[@owentimo]

Great tutorial. Thank you. Why would you not want to put grease in the sensor when installing to make sure rust does not form in that hole in the hub? The older version of 1A Auto installing sensors showed them apply grease to the sensor upon installation? Does it really matter?

[@ripptydevibes2581]

No grease needed, the hub that the sensor mounts into is a greasy atmosphere. The main concern is painting the mating surface.

[@carputtgaming2088]

What if the hub and sensor are brand new? No rust at all but having this exact problem.

[@VDVC-RC]

I wish I had seen this video first. Had a similar problem on my 02 Chevy S10 Blazer. Previous owner let the passenger side front brake get to Bare metal on the inner pad. Diagnostic tool said "erratic signal/no signal from passenger side front sensor, and that set an ABS DTC light. Upon inspection that sensor wire looked cut or just the casing was loose at the sensor. I bought 2 news ones to replace both. Had to clean out some metal shavings stuck to the magnet in the sensor. Wasn't rusty on that side so I didn't clean the mounting surface by file or emory cloth. Now I get the low speed abs activation, but no codes set. I'll check the driver's side sensor mounting area for rust when I replace that sensor, and go back over the passenger side and clean out any more metal shavings with compressed air & brake cleaner. Then coat both mounting surfaces with a rust inhibitor.

[@lotylelemon8617]

Hi Mike so the squeaky noise when stopping is the abs engaging

[@ethanrice2680]

1998 k1500 replaced both sensors and cleaned surfaces, kept the old shims on each side and still getting the abs issue where it activates at low speeds, should I remove the shims or something else I’m not doing right, any help would be great

[@michaelquinn6582]

My 2004 Silverado does this. Gonna go through both sides and do what you did here to see if it fixes the abs issue. Getting tired of it engaging at low speeds on dry road

[@WayneCRamsey]

Great video. Easy to follow and very detailed. I did both front sensors and it solved my problem of low speed ABS activation on my 2002 Chevy Silverado. The ABS doesn't activate at low speeds BUT the ABS light now comes on and stays on. Anyone know if it needs to be reset or I actually do have an ABS problem now. Your thoughts will be greatly appreciated.

[@thunderhead870]

Run the scanner on it. See what codes say

[@1AAuto]

+Wayne Ramsey Thanks for checking us out! We do recommend getting your vehicle professionally diagnosed.

[@cedmac3366]

check your ABS 60amp fuse...a blow fuse will also cause the ABS light to stay on. If the fuse is blown your ABS will not engage and wont cause low speeds and the ABS light will stay on. Good Luck

[@antonioromero4585]

Mine does the same thing I think it's the driver side as that's where I can hear the sounds of the caliper but I replaced sensor with new one same issue

[@ditttch]

very detailed video, thank you for putting in the effort to share your knowledge with everyone. I believe the rear sensors can do the same thing. I had this issue on my 2007 GMC envoy and ultimately replaced both front bearing assemblies with Delco brand parts, now I'm focusing on the rear because after inspecting them I see that they have the same issue as the fronts. The rear sensors go right into the axle assembly. Am going to pull them and clean them up, reinstall.

[@1AAuto]

+ditttch Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c

[@TheSkittle1976]

I have a 2001 ford ranger that this seems to be happening to. The left wheel seems to be breaking free compared to the right. Gonna have to check this out. Great stuff and thank you.

[@1AAuto]

+Rocker Thanks for checking us out! 1AAuto.com

[@silvermcc2768]

Is it OK to use brake parts cleaner on plastic and electrical connections?

[@devonmoore9152]

No issues with the paint or the brake cleaner going into the hub assembly?

[@Njennings42]

just replaced my wheel hub assembly on my 02 sonoma, which comes with a brand new speed sensor. didn't have this issue before replacing it, which was a super rusty original part. any suggestions as to cause?

[@RuffTymesBob]

Where can I get replacement bolts and shims?

[@Kyle7K]

Found my way here because this happened to me today, nearly drove my Tahoe through the front window at NAPA. Couple of nut hairs away from cracking glass. Never happened before today. Relay pulled until I can properly repair it.

[@tomjoad1363]

I know your company for years. This is exactly what is happening to me. Do you ship internationally ?

[@tjpowers9884]

Have a 2002 gmc sierra, I have replaced power Booster and Master Cylinder, front calibers and rotors. But the issue I'm having is that when trying to drive in parking lot and pull in a space I loose bark pressure and have to push all the way to floor and hope it stops

[@nickbriones6106]

Was it still doing the same thing when you drive it ?

[@Johnny-ip4mk]

Could you use anti seize on those surfaces?

[@joe6sob]

Thanks for the video but I have a question. How do ill adjusted sensors cause a spongy pedal and did this fix the problem?

[@vipergg9159]

Spray painting the mounting surace doesnt get on the tone ring and cause issues ?

[@Hgkingx]

How did you torque a nut to under 25 lbs when using a torque wrench that is 25/250 ft LB’s?

[@stevefairfull9912]

This is the fix for when you feel the pedal vibrate, and you release and reapply the brake for it to stop?

[@dimitritsagaris7469]

Cleaning didn’t fix mine are there sensors in the rear?

[@cornerhunter32]

Awesome video, really helped me diagnose the issue with my vechile. Cheers

[@dustincoil2926]

I’ve been having this issue myself thank you for the awesome video you probably save me a ton of money do you have a new sub!!!!!👍👍👍👍

[@1AAuto]

+Dustin Coil Thank you! We love empowering our customers and showing how to perform DIY auto repairs with our high-quality auto parts. 1AAuto.com

[@hollispage3398]

Yep that exactly what was wrong ,clean surface till shiny and fix problem.

[@kennethkruse2535]

I have replaced the front wheel bearings with new sensors. The brake pedal does exactly this……there is a stainless shim and a brass shim under the sensor mount. There is also a brass sleeve thru the sensor mounting hole to be used as contact. Should I remove the shims to close the air gap??

[@charlesronk2989]

I have a 1997 gmc jimmy when the ball joints went bad while under warranty the dealer cut the wheel speed sensor wires instead of unplugging them. They repaired the cut with simple wire connectors. When those corroded the ABS system would activate without much brake pressure but it just cycled the fluid inside the ABS valve removing all hydraulic pressure to the wheels. Giving complete brake failure. It surprised me because I actually worked at the TRW plant in Fowlerville MI where these systems were made. They told us any failure in the ABS system would result in the system returning you to just standard brakes. Unfortunately this is not true. Luckily no one was hurt. I since replaced the backing plates with new wheel speed sensors. These new ones started rubbing inside the rim and the same thing happened again. Now I just leave it unplugged.

[@1AAuto]

+Charles Ronk Thanks for checking us out and sharing your feedback! 1AAuto.com

[@cavegardens4686]

Thanks. Other videos didn't give ba good explanation. Tomorrow I will work on my Subaru. But didn't get the type of spray you used

[@ggg_wood5361]

Just replaced both front hubs/ bearing assemblies. problem still there. low speed brake vibration.... Is the only other part the ABS module? I also cleaned the ground wire on the frame.

[@Simmonsracing187]

Was the truck throwing any codes?

[@AnthonyJones-ki2es]

great information.keep in mind if someone recently replaced the wheel bearing with a cheap one it ma be leaking grease and causing the same problem with the sensor as in my case

[@1AAuto]

+Anthony Jones Thank you for your feedback!

[@JBlinky67]

Please explain more.

[@jeffrunyan2691]

I have a 2013 Savana 2500 and it's doing this without even touching the brakes it's applying them but it seems like it's only one side cuz it pulls to one side whenever I hear the sound. It feels like a wheel bearing that is trying to lock up but then it goes away and it makes a growling sound. After I speed up it doesn't do it. But it's very unnerving.

[@joevd8718]

I thought the spec on the caliper mounting bracket to the hub is 40ft.lb? Either way there is plenty torque, no axial load on the bracket only shear load. Great video was thinking of doing just this however replacing the entire hub doesnt seem to pricey. Are there any tricks to removing the CJ joint from the hub or is it just a centre bolt holding it to the spindle??

[@Papasmurf425]

That’s sounds like the slider bolts that hold the caliper onto the bracket. Bracket bolts are 133ft lbs

[@tedhounsell2196]

One of the best I've seen!

[@1AAuto]

+Ted Hounsell Thanks for checking us out! 1AAuto.com

[@jorheybhai]

Sir I have 2009 Toyota highlander ABS work so quickly even in the rain and little bit snow Even I put snow tires but they help little bit Do you Think If I clean that rust and follow your Vedio It can solve my problem or no Thanks in advance Even I am thinking to pull out ABS fuse.

[@garystamper9900]

Great video, going into detail like you do, little trade tricks good prices too

[@1AAuto]

+Gary Stamper Thanks for checking us out! 1AAuto.com

[@kengarber775]

First off the proper tourque is 120 ftp on wheel lugs and should have been tightined a minimum of twice at half and then full I personally prefer doing it in three steps to final tourque believe it or not improper tourque of lug nuts on a setup like that one is number 1 cause of rotor warpping believe it or not but absolutely true also your only supposed to use electrical parts cleaner on sensor not brake parts cleaner unless certified for electrical parts as well you also didn't put any locktite on bracket bolts nor any antiseaze on sensor bolt or hub face to keep rotor from corroding to the hub and you didn't clean out the sensor hole and your not supposed to sand near the sensor or it's mounting holes as the magnet in the sensor can pickup the magnetic particles including the microscopic ones and can a rune sensor altogether even a brand new one can be runed like that

[@wearethe80s4sure]

Like your calm video's. Not sure if all ABS systems are the same? Have you ever come across wheel speed test with scanner that shows speed of all tires and the rear two are half the speed of the front tires. I'm a do it yourselfer.

[@1AAuto]

+John Gordon Great question! Search our video library for more on this vehicle: 1aau.to/m/video-library-c

[@wearethe80s4sure]

@@1AAuto You have a great web site, i put on a couple of rear abs sensors, wrong gap on left rear and wrong type on right rear. When i do a wheel speed test, i was getting half the speed of front wheels. Speedometer doesn't work. Back to the drawing board. Maybe it's the toning rings on hub 120,000 miles. May be the Bosch 5.7 abs module? Before i do that? Wish i had a hoist.

[@CurtisGreen-q2b]

I have a 2004 Chevy avalanche z66 , my abs, brake and traction control light is on my truck won't hardly get any speed evan when pressing to the floor, could this be rear abs speed sensor

[@robertoortega8398]

Great video. I guess this is my issue. 2008 Chevy Express 1500 2WD. Braking on low speed(coming to a stop)I feel a vibration pushing back on the pedal(pedal kick back) and soft brake pedal feel, is this the ABS kicking in? The feeling is like when your car skids on snow and pedal kicks back on your foot. Thanks for the help, I'm looking for a reputable mechanic in my are(though job). North Jersey.

[@shahrampeyman614]

you are right,bad speed sensor will do that.

[@indi67759]

I have the same and it is abs ring cracked on my

[@Robmunoz10]

Roberto Ortega was it the sensor or hub?

[@Celtics20]

I have this same problem, I replaced the abs sensor but it didn’t fix the abs problem. I’m going to have to take it apart again and do a better job cleaning the rust. Thanks for the video.

[@1AAuto]

+Gl0ck93 Glock93 Thank you!

[@Celtics20]

1A Auto Parts just an update, fixed my abs problem thanks to you guys from 1Auto! I used a dremal rust remover bit since there was a lot of rust. It did the job! I live in the north east where salt is heavily used on the roads. Thanks again, you saved me money!

[@1AAuto]

Thank you for the feedback! +Gl0ck93 Glock93

[@Robmunoz10]

Gl0ck93 Glock93 did it fix your problem or??

[@johnkay8778]

Thanks for the great video , Question.... Will a faulty wheel speed sensor throw the truck into a limp code ????..Like reduced speed and transmission staying in 2nd gear

[@1AAuto]

+John Klauzinski Thanks for checking us out! A faulty ABS sensor could cause this 'limp mode' to be activated. The reason that an issue will put the vehicle in this mode is because it is designed to protect the transmission from further damage that could be caused by the signal error. The computer will do this when an input (from the defective part) is not what it was programmed to expect. It is a protection mode essentially. 1aauto.com

[@rickparshall]

I'm having the same problem ... my ABS light is on and the service brake light comes on and my 02 Tahoe won't go out of second gear.. I have cleaned every ground, fixed ones that were missing, tested voltage at ABS wiring plugs and the abs wires show resistance at ohm check.. will see if this helps.. it has been making the abs noise at random slow down/stops..

[@jasonmateus924]

I'll try this on our 08 Uplander! Thanks for the great video

[@normangraves4133]

finally. rebuilt my breaks new booster. new master cylinder (replaced 2 times in one month) pep boys couldnt find why it messed up in slow speeds. bleed the lines 4 times.. still couldnt figure it out. this vid may finally have giving me the hint as to why it doent feel safe at slow speeds.. thanks. will work on it.

[@normangraves4133]

i have a '95 Chevrolet g20 van

[@hankyank7073]

I put a brand new hub assembly with sensor on my 2013 4x4 silverado yesterday and it still activates on the same front left wheel so I have to disconnect the sensor to keep the brakes from applying its only the front left

[@RobertWhite-w4v]

this may work fine for older hubs, I have same issue with both new hubs and sensors, so its not a cleaning problem , will have to see if the new sensors that came installed on the new hubs are just bad , unfortunately this video didnt help me at all , i need to know how to check the new hubs and new sensors to know if they are bad at being new .

[@ifreemantoo]

Great video. Directly to the point. It worked on my 98 Bravada. Thanks!

[@1AAuto]

+ifreemantoo Thank you for the great reply. We love to empower our customers by showing you how-to perform your own auto repairs while installing our high quality auto parts. Have a great day! 1aauto.com

[@brianharrold8542]

What about taking off from a stop and let your foot off the brake pedal and give it some gas and hear a grunting noise and says stabiliala track comes up where the odometer and goes away what could it be on a 2006 suburban 4x4

[@kevinculleton4189]

My new sensors did not come with the magnetic plates. I assume they are not required?

[@gmichaeldesigns4352]

Does this problem keep the vehicle in low gear and cause speed restriction?

[@ramphalsa]

No. That may be a faulty 4WD selector switch or a faulty cable going to the 4WD motor that engages the transfer case. Pay careful attention when that happens to see if the 4WD selector is in 4-Low. That would cause the behavior you're seeing as well as a warning message on the dash stating that the stability and ABS systems are disabled.

[@jesserousseau2481]

I solved it real quick amd easy!! Unplug the abs actuator lol

[@romancanales573]

Only real mekaniks know....😂🙃👌💯

[@romancanales573]

Fyi I know I misspelled mechanic

[@mitchellbehringer5028]

@@romancanales573 you misspelled mechanic

[@Hugh_Manitee]

Or could pull the fuse to it.

[@ronwicker8761]

Would this situation cause your transmission to shift hard in 2nd to 3rd? 2008 gmc Sierra

[@1AAuto]

+Ron Wicker We wouldn't be able to diagnose an issue like that here, you may want to have a local mechanic take a look at it. Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c