How to Replace VTEC Solenoid 02-09 Honda CRV

[@1AAuto]

√ *Watch the Video* √ *Buy The Part at 1A Auto* 1aau.to/m/Visit-1AAuto √ *Do it Yourself* √ *Save Money*

[@marcsongaudin8429]

Mechanic keeps ripping people off right. I had that problem with Honda CR-V. One guy took $700 to fix it for me. Still leaking. Last month Honda dealership took another $450 to fix it same leaking. Now I will try myself, I ordered the gasket I am waiting for it. Thanks 👍👍👍

[@julianelcash2261]

My VTEC engine light is one after I replace it !? Should I just delete ?

[@sssmithVR]

The only auto repair video I have EVER seen with a female mechanic. Awesome to see. Good job!

[@1AAuto]

+Sean Smith Thanks for checking us out. Shop here for high quality auto parts: 1aau.to/m/Shop-1AAuto-c

[@attackroflchopter4403]

@@1AAuto lol

[@newbernbears]

She is best of the best

[@celiapearson6896]

i cannot believe how this wonderful this video is . It helped my sooo muccch it's a brilliant strait forward soft spoken woman who made this video. wow the mirror was and will be used by me from now on. you actually saved me 800.00. i used to do all my repairs but its so hard to bend your bones the right way as we age. thank you, i would send you something but i dont have an addrerss. thank you again

[@agr8fulson]

so helpful. the mirror is vital and long 10MM with long extension bar made my life easier. even though, bloody knuckles may still be unavoidable.

[@Jeff-tr2vp]

Great video. It's way easier than you think. Changing the knock sensor, now that was a hard job!

[@cliffordbodine5834]

Oh yes! I had to change my knock sensor on our 04 CRV and it was almost impossible because of the tight clearance. Ended up finger-tightening for starters with the very tips of my fingers, then finishing with a wrench. What a mess.

[@xiax734]

This was a surprisingly easy fix! Having a mirror definitely helped. For me the hardest part was getting the wire off that are zipped tied to the bracket. I used my cordless 3/8 ratchet loosed it by hand then the zipped it off. I used a 1/4" socket with a short extension to put it back.

[@braxtondodd5282]

Great video, bought a swivel head ratchet and did it myself without much trouble, thanks!

[@1AAuto]

+Braxton Dodd Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c

[@ptyptypty3]

your 1A Auto videos are the BEST!!.. PERIOD!! ... thank you!! :)

[@gregklaus]

2009 Honda CRV EX-L : Code P2647. I'm glad I watched your video instead of trying to just replace the sensor! For a few extra bucks I got the whole assembly! Thank you ThAnK YoU THANK YOU!

[@simranbanga5467]

Same code here today mate. Did you end up sorting yours code out after this new vtec assembly?

[@TttTtt-q3i]

Hello, I have a 2005 Honda CRV four-wheel-drive code P2646 is this it?

[@TttTtt-q3i]

Is this the part that I need to change?

[@JoshuaStowers]

Fantastic camera angles!

[@dad2ni]

Excellent video. What is the part# for the harness clip, just in case I need to replace the one for my CR-V?

[@patrickthomas6170]

Mirror essential , take shield separate from solenoid and u won’t break clips . Move manifold heat shield if u need more room only 3 bolts. 1/4 inch torque wrench with 3 inch extension. Honda solenoid with screen about 200$: but that is what I used . Disconnect negative batt cable 15 minutes to clear code . Test drive. All good . Had code P2646 . Bucked at 3000rpm .CEL,VSA, TRIANGLE LIGHTS ON DASH

[@marcsongaudin8429]

Wow she can't even see and she still doing the work! Super awesome lady, I wish I had you lol 🤣🤣🤣

[@birdfire0011]

does the battery need disconnected to do this job?

[@j-anaya3624]

Will this help with the vta , abs and triangle lights on issue??? No code for it and no issues driving either

[@afara2000]

Not sure about space in CRV, but for Accord definitely open those 3 bolts from underneath while front of the car is raised on jack stands. You need to drain engine oil and remove oil filter to have space and view. Those 10mm bolts are very tight and can easily get rounded up!

[@shobud7561]

If you think that one is hard to get out , try the K24 accord with 4 mounting bolts ..

[@dannypants2020]

Thanks for the advice about the Accord! Mine is leaking and I have to replace the gasket.

[@aimansahaja5981]

mine is crazy tight to remove them bolts

[@mogtrader8]

do they have to be torqued back even tighter?

[@bradcook4996]

My 2005 CRV keeps blowing the gasket to the solenoid, I have put a new solenoid on and replaced the gasket 2 times any suggestions?

[@faithflores7851]

This same location on 2004 2.4 accord?

[@warduck2960]

More than likely. I was looking for a video for 08 civic si and this helped. It depends on the generation tho.

[@clutch3shot]

Yes

[@andyb.1200]

Great video! Could the leaky gasket clog the catalytic converter and trigger the Check Engine light?

[@chiefgwopp100]

*How Did You NOT Strip It? Guessing Mines Are Just Tight As Hell* ..

[@notapplicable430]

This OEM VTEC solenoid is now hard to find. My Honda dealer is back ordered and your website says "out of stock".

[@davidli9457]

I saw people put hondabond on top of the gasket rubber seal. Is that a better way to prevent leaks?

[@georgevasic6141]

Thanks for the information and demonstration. The mirror idea was excellent idea.

[@High_Tech_Mountain]

Great video, professional and thorough walkthrough!

[@JYJ772]

Does matter which size of ratchet to use to get the bolts out? 1/4 or 3/8?

[@christophercreary]

Is it best to do this when the engine is warm or cold?

[@s.w.4174]

Nice video. Would this work the the 08' Acura RDX as well?

[@HideSeek_Soje111]

That's the ratchet I didn't know I needed.

[@quietkey2003]

great camera angle and complete video...peace

[@1AAuto]

+Lee thats Me Thanks for checking us out! 1AAuto.com

[@timthemechanix]

Compliments to lady doing the video. Wish I had known about this problem while I was replacing the head gasket on the vehicle a year ago I would have done it then. Problem is the customer lives a long distance from me and hasn't had time to get it here until now. And 1 A Auto, I link your site on my website, I just priced out your cost and then at my parts source local because I need it today, I suggest you compare and adjust accordingly. You are way off and should find a better source yourself.

[@1AAuto]

+Tim the Mechanic Branthoover Thanks for the feedback! Our prices are subject to change as the market is constantly moving. We are always working to offer great parts at competitive prices daily!

[@bflan590]

If I overtorque the bolts is the gasket ruined or can I fix it later? My inch/lb wrench is in the mail

[@jeremiahgriego8677]

I just replaced the solenoid as you have shown us in this video although I'm still getting the same error code (P1259). Could the problem be the wiring to the solenoid? If so, how do I fix this?

[@jessica_adriana]

Same issue and my car idles rough and lacks acceleration!!!

[@tonygomez4485]

Jessica Adriana I would do an engine flush, I think your VThec selenoid keep on getting plugged, or you got to be cleaning the little filter clear until oil runs in there nicely and you’ll solve your problem. Cheers

[@jessica_adriana]

@@tonygomez4485 yea i got code p1259 solenoid needs replacement lol i hate hondas i had a toyota and they dont lack acceleration at all

[@tonygomez4485]

Jessica Adriana yeah when the vtech won’t kick in it won’t have power, they perform based on oil pressure those selenoids once that little screen is clean your are set. I hear you

[@TheoatStudio]

Today tried to replace that gasket but those bolts are freaking tight struggling to remove them, going to go at it tomorrow again.

[@2bond007]

Great video! Use of mirror and camera! I'm doing this project this week. What is the part number for that zip tie thing you cut? Ty

[@vparanilam]

DId you find the part for the zip tie peice? Can i just use a normal zip, its just to keep the cables together and secure right?

[@kfrerix9777]

It is a squeeze-type clip. just don't cut it like she did.

[@michaelbemvindo]

Video was ver help for. Bad news but , right corner bolt snapped in block. Any advise , cant use and extractor because absolutely no access. Any advise?

[@ArianaTheDopest]

I had a clog problem in mine I just sprayed it with WD-40 put it back in and its been working for the past 3 years

[@joogledlay1225]

My 07 CR-V is getting the P2646 code with a rocker arm code with A Rocker Arm Actuator System Performance/Stuck Off message. Car goes into that protextion mode where car just barely runs. Turning ignition off and on in neutral usually gets car back up to speed then happens again. Is this the repair for this issue. Other comment here seems to say it isn't. By the way, I bought your tensioner and worked perfect on same car.

[@ado13shark69]

Mis respetos Mujer 🖐️. Si usted pudo yo también. Gracias por la información, Saludos.

[@ljmatias2451]

Looking at a CRV that is currently throwing the code p1259. If i was to replace the vtec solenoid, would that fix it? Its being sold for $1500 with only 105k miles

[@shaneeem6114]

how much for the bolts? i might have a stripped bolt, not sure yet. plz and thanks.

[@jif8802]

Nice job! Very thorough.

[@syedasif42]

I have honda odyssey 2008 and have the issue with v tech solenoid. How much it will cost me in Australia.. ? Thanks

[@rogeryanez8107]

Nice video, are the torque specs the same for a 2003 Accord LX 2.4? Thanks

[@1AAuto]

+Roger Yanez Thanks for watching! Yes they use the same part, so the torque specs should be the same.

[@zhangtiger9651]

what kind of code you get if this is bad ? p4244 ?

[@The4sknmuncher]

WhAt kind of bolts do the solenoid have

[@IXTLIWOLFMX]

Hello, could you confirm the tightening torque of the screws please.

[@fern9234]

05:40 she says it. 8.7 foot pounds

[@bensellersaudio]

CHANGE THE BOLTS TOO! Very likely they at least one will break when reinstalling

[@1AAuto]

+Ben Sellers Thanks for the feedback!

[@robertoortiz5894]

MY CRV 2008 HAS A VSA FAILURE AND A MECHANIC TELLS ME TO CHANGE THIS VALVE TO SOLVE THE PROBLEM, IS THIS TRUE?

[@sethoakes3795]

Huge huge help. Love you lady!

[@ignaciofelix750]

What are the symptoms of the valves

[@Jassett]

Hello, I have a question regarding the vtec, I have a 2007 k24 z CRV engine and my VTEC only has one sensor, it does not have an oil pressure sensor Where does the oil pressure sensor go It has a screw. I have an oil leak. I have already changed the VTEC seal and the valve cover seal. It continued with the oil leak, I start the engine and I look at where it comes from, I can't see where it does it And the leak comes from above only appears after a while of using the car

[@MCFresh13]

I got an ‘03 CRV with error code P1259 (Vtec system malfunction), among other errors for misfire and intake manifold, and a crank-no start situation. Would replacing this VVT Solenoid do the trick for my crank-no start situation?

[@1AAuto]

+DJshadö We wouldn't be able to diagnose an issue like that here, you may want to have a local mechanic take a look at it. Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c

[@HilalArnaout]

I have an oil leaking from the vtech for crv 2008 the technician changed the rubber but the problem hasn't been resolved so he added some glue on the rubber and fixed the slenoid but the oil is still leaking so what can i do

[@schattopadhya]

Is it harder to replace on a 2010 4WD CR-V LX? Don't find any video.

[@1AAuto]

+Subrata Chattopadhya We do not have a video for that model right now, but we'll keep this request in mind for a future video! 1AAuto.com

[@schattopadhya]

@@1AAuto I just replaced my gasket, 2010 4wd model has a metal bracket over the valve holding with three screws and the harness goes on it and then the valve is attached with 4 long screws. The gasket is also looks a little different. But your video helped me a lot. Thanks.

[@walmonte2391]

@@schattopadhya Hello there, i have also a 2010 crv with the same issue. could you provide me with the part number for this gasket? Thanks in advance!

[@pjwill1077]

Is this similar to 2005 tsx?

[@1AAuto]

+PJ Will We don't have a how-to video for your vehicle right now, but the basic steps in this video should be enough to do this task. Buy this part for your vehicle on 1AAuto.com: 1aau.to/m/Shop-1AAuto-c

[@vela07]

Great video, thank you so much. Did this myself today

[@ScottHolcomb007]

Great video but out of 3 bolts I was only able to remove one. The other two rounded out...badly. I've tried at least 5 different magic sockets to remove the bolts...no luck. Now I've only been able to drive my Honda Element up 67 mph! Seriously...I go to sleep thinking about how I can remove those two bolts from "heck!'

[@2.0taccord]

Scott Holcomb you could try to weld a new nut on it or JB weld it on

[@fs496]

Use a breaker bar. Super easy.

[@kfrerix9777]

Never use "magic sockets" or "gator grips" for anything that is very tight. When confronting a really tight nut or bolt, there's no substitute for a quality wrench or socket. I would bet that a snap-on brand socket will still remove that badly rounded bolt head. They're really that much better. I keep snap-on in the most common sizes.

[@Ben86511]

I ended up with 2 codes after installing a new Solenoid on my 2011 honda element. P2646 and then P2649. I only changed it because it was leaking and didn't have any problems before I swapped it out. Now I'm have the power cut outs at 2500 and 3000 rpm. Any help please?

[@jaysonmiller9157]

Hey did u ever figure out why it kept cutting out I'm having that same issue right now

[@ommongkul3096]

How often it broke and and what is the reason to make it broke? Thanks

[@timbowe9519]

Good job🎉

[@Nolagod97]

I had a hard time because i didnt have the same ratchet included in the video. Make sure to use a SWIVEL ratchet. It will make things easier. 👍👍

[@1AAuto]

+Nolagod Thanks for the tip! We'll pass this info along to our production team.

[@neilsenmarquez6058]

Would that fix the p1259 code.

[@1AAuto]

+Neilsen Marquez It may fix the check engine code P1259 but there are other variables to look at with that code.

[@derrickdunn6326]

This video help me fix my problem

[@1AAuto]

+Derrick Dunn Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c

[@eurovan03]

What will happen if the part is bad to the performance of the car

[@1AAuto]

+Vision Maloco There could be roughness in the idling engine and a decrease in fuel efficiency. Thanks for watching!

[@a1guniverse]

P2646 Code after Installing New Selonoid. Engine Light, VSA & Triangle Lights came on. Turned the car off & back on. Only Engine Light on. Oil Problem? How to fix this issue?

[@1AAuto]

+Alan Yu We wouldn't be able to diagnose an issue like that here, you may want to have a local mechanic take a look at it. Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c

[@nilolee2426]

Why do you need to replaced this part,what is the symptom?

[@1AAuto]

+Nilo Lee Check Engine Light comes on. Since today's modern cars are controlled by an Engine Control Unit (ECU), virtually all individual components are monitored by the ECU. Engine oil is dirty. This is more of a cause as opposed to a symptom. Rough engine idle. Decrease in fuel economy.

[@thelostsoul5531]

Dont forget oil leaking.

[@thebestmen100]

I am looking for torque specification.

[@johnnyb33good21]

Now what do you do if the bolts are not gripping to your socket and are wanting to strip. and you can't get the bolts out Does anybody have any suggestions?

[@littleacorn98]

Most Excellent 🤓 i totally spaced out about using a mirror 👍👍🐈

[@apr9286]

Do you need to re torque bolts after a few miles?

[@400Redsport]

This should be checked and done to almost any work you're doing when it applies to your vehicle.

[@rveasna22]

Vtc or vtec solenoid?

[@vicboy5485]

Vtec

[@milesfifer171]

What does this thing do?? How do I know if I need to change it?

[@anibalfernandez2769]

Can someone tell me if the engine oil needs to be drained before to do it this job?

[@1AAuto]

+Anibal Fernandez No you do not need to drain the oil before performing this repair.

[@simranbanga5467]

I have Honda 2007 CRV and I am getting P2647 code. Is it due to this assembly or rocket arm actuator system stuck on bank 1? What does that means please ​@@1AAuto hi

[@PrathameshBhat7288]

"hi5, namaste" cool video buddy:-* also i have honda cr-v 2.4l type 2

[@carlito3094]

Great job... one handed.. nice

[@1AAuto]

+the marti Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c

[@MultiRafael23]

Everytime I torque it to 8.7 the gasket brakes and leaks. I don't know what to do...

[@DONphantasmo]

very helpful. Thank you

[@potroastmaster]

Would this fix p2647 code ?07crvawd engine light went away on its own but still has this code

[@1AAuto]

Codes are not a confirmed diagnosis, we recommend getting it professionaly diagnosed. Thanks for watching our video! +potroastmaster

[@angelisone]

Most likely not. If you got 28 hours, rip out the valve cover and clean out all inside & below of it. Then replace PCV and all hoses. Many customers will not pay for $1,000.00+ jobs on a 15 years old SUV then have to pay for a complete timing belt kit replacement.

[@ommongkul3096]

How much if i would like to buy it for my Honda CRV 2002?

[@1AAuto]

+Om Mongkul here is a link to the part on our website - www.1aauto.com/honda-acura-vtec-solenoid-with-seal-honda-oem-15810-raa-a03/i/hdvvt00001?f=1070357&y=2002

[@FOTOFOTA]

@@1AAuto $37 at Amazon

[@bfunphoto]

The official Honda repair manual for my 2006 CR-V says that the torque spec is 7.2 lb feet...not 8.7

[@smackomackmoore1409]

Nice video well done

[@nequelnelson1950]

I dont dont see on that website

[@1AAuto]

+nequel nelson The link is under the video. Part number HDVVT00001. Thanks for watching.

[@tylersmith293]

Replace oil filter with OEM. Often fixes issue.

[@cayrick]

Wouldn't it be easier to put the car on a hoist and go up from below?

[@zeilstar]

Stripped the head of my third bolt 😢 Worn out 12 point socket.

[@tylersmith293]

If it’s not OEM you’ll be doing it several times.

[@JesusSanchez-qj4fc]

good job

[@julianelcash2261]

Anyone gets engine light after fixing it ? I still have it on after the first week changing it, all connected and still engine light on

[@GUANAJUATOMEX]

Good video

[@1AAuto]

+Lorenzo Lucas Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c

[@FOTOFOTA]

Great Job!!

[@tubeyou1804]

why didnt put gasket maker there?

[@metzmatu8409]

It doesn't have enough flat mating surfaces for gasket maker to have a proper sealing. Also gasket maker may smear and seal those tiny oil passages in the VTEC valve assy.

[@XNonexistenceX]

I am about to spend close to 1,000 at this website and the v-tec solenoid is one of them.. When i am driving "not always" but the vsa light will pop on and another warning signal too. Then i lose the ability to go faster. Like if i am going 65 down a highway and the vsa light comes on and i have to slow down for any reason it will not allow me to resume my speed after i slow down. then it clunks and bogs out until i pull over and put the car in park turn it off and then restart the car the vsa light is gone and i can drive as normal till it pops up again. Seems to me when it rains it comes on more often but still comes on eventually every time that i drive my 2005 Honda Crv .. will this help me by buying the solenoid or could it be something else... Please if anyone knows whats going on leave me a comment and i will read it and answer back.. Thank you

[@1AAuto]

+Michael Anderson Thanks for checking us out, and ordering with us online! Unfortunately, we cannot provide a diagnosis for your vehicle over the internet. We would suggest consulting with a local mechanic to confirm that this is the problem with your vehicle. 1aauto.com

[@1AAuto]

+Michael Anderson hanks for checking us out, and ordering with us online! Unfortunately, we cannot provide a diagnosis for your vehicle over the internet. We would suggest consulting with a local mechanic to confirm that this is the problem with your vehicle.

[@NYMEDIC892]

Idk if anyone got back to you, but check your oil level. Mine had a leak and did the same thing. Topped it off, and problem went away for a bit.

[@johnniemeadors]

Do believe I would put a rag or towel to catch my dropped bolts

[@bestofthebest3821]

If i'd live un usa i'd Buy my partes from 1A auto ....they Are helpfull ... No. Nonsense with Fake deals like others parte stores

[@1AAuto]

+best of the best Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c

[@bk3521]

and one of the bolts rounded while I was doing this.

[@josephsuttles8981]

Honda told me that it would cost me around 581.26 to fix it and be around 2hrs

[@prismagraphy]

It took me around :45 minutes with just a flex head ratchet and I think #10mm. I’m about a 5/10 on the car mechanic scale.

[@MrBchott]

Before I open this 10mm bolt from 1A auto Before I touch this clip from 1A auto 1A auto rent tools

[@1AAuto]

+bchott 876Auto Thanks for the feedback!

[@rangatangbangbang3180]

Don’t go to a mechanic, watch KZbin videos

[@denniskennedy534]

Take the right wheel off and you can get to it

[@angeldelacruz7254]

what is that part cost??

[@1AAuto]

+Angel De la Cruz We carry 2. The one in our house brand is $94.95 and we also carry the Honda OEM part for $209.95. We offer one more in the Standard brand for $99.95. All have a Lifetime Warranty. Thanks for the inquiry!

[@Talisayin]

Angel De la Cruz I got a Dorman from oreilly for $75.99. Autozone and Advance will price match that but you can’t really help oem. My car will intermittently surge and not go past 3500 rpms or so. Scary shit when you’re trying to merge on the highway

[@oneyriver7369]

I like this video my car is leaking from there