Honda Oil Leak Fix VTEC Solenoid

Does your Honda K series engine have a sizable oil leak? If so, it could be the VTEC solenoid gasket that’s leaking. In this video I show you how to remove and replace the VTEC solenoid gasket on a 2009 Accord with a K24 (2.4L) engine.
#ETCGVideo
My Patreon Account: / ericthecarguy
The best place for answers to your automotive questions: www.ericthecarguy.com
Check out the ETCG Blog for the latest info: www.ericthecarguy.com/blog
Check out my ETCG1 channel: kzbin.info?su...
Thanks for watching!
Parts
Gasket I used in this video (Your gasket may be different, please be sure your order the correct gasket for your application): www.hondapartswholesaledirect...
Tools
Inspection Mirror: jbtoolsales.com/ullman-device...
Related Videos
Spark Plug Well Oil Leak Fix: • Spark Plug Well Oil Le...
What is VTEC and How Does it Work?: • What is VTEC and How D...
How To Repair a Stripped Out Aluminum Oil Pan: • How to Repair A Stripp...
Regular Oil vs Synthetic Oil: • Regular Oil vs Synthet...
How Oil Pressure Works: • How Oil Pressure Works...
Honda K Series Valve Adjustment: • Honda K Series Valve A...
How To Replace a Honda K Series Starter (Easy): • How To Replace a Honda...
How To Replace a Honda K Series Serpentine Belt Tensioner: • How To Replace a Honda...
Honda Element/CRV 110K Service (Part 1): • Honda Element/CRV 110K...
Honda Element/CRV 110K Service (Part 2): • Honda Element/CRV 110K...
K Series Thermostat Replacement: • 2004 Honda Element/CRV...
Another Dealership Fail and ETCG Rants About It: • Another Dealership Fai...
**Answers to your automotive questions found here: www.ericthecarguy.com/faq
Social Network Links
Facebook: EricTheCarGu...
Twitter: / ericthecarguy
Instagram: / ericthecarguy
Wanna see more stuff like this from ETCG? Information on Premium Membership: www.ericthecarguy.com/premium...
Stay Dirty
ETCG
Due to factors beyond the control of EricTheCarGuy, it cannot guarantee against unauthorized modifications of this information, or improper use of this information. EricTheCarGuy assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. EricTheCarGuy recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video. Due to factors beyond the control of EricTheCarGuy, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not EricTheCarGuy®.

[@HexBMX]

Dude..I do my own work...but can watch your show all day anyway. Love it. Been watching for years. Props to you and your years of putting out legit info.

[@jayjanyh2932]

Another excellent camera angle, with perfect narration.

[@durwoodrobison7800]

Thank you, thank you, thank you! I had to do this on my 2003 RSX base today and your video made it much less nerve wracking. I noticed I had a CEL regarding the VTEC solenoid, and smelled oil under the hood, also noticing losing a significant amount. I was worried I had a major issue, came across this, traced the leak to the solenoid, and so far, so good. No more leaking!

[@maxnguyen22]

Just did this few months ago. Watch out for the AC compressor clutch. I guess the magnet in them go out. Just made all the repairs on mine. Seems to be doing good now. Great video. Thx Eric 👍

[@Adreiaun]

Successfully completed this job on a 2010 Honda Accord. This video was the only resource I referenced. Thank you so much!

[@spunkmire2664]

I have been able to fix my friend's honda after watching your videos. Thank you!

[@jdigitalseven7]

Why are diagnosis/repair videos so relaxing?

[@labradormcgraw]

Two-and-a-half years away and it's great to see that ETCG is still as good as ever.

[@lindenbasket]

amen brother ‼ so true

[@pughconsulting]

I know it's an old video, but it helped me complete this job today. Other than not being able to see anything I was doing, it's a pretty easy job overall. I just followed along with what you did. Thanks for posting it.

[@Kazuko-rq4qd]

Watching Eric fix cars is so addictive, I think I need a support group for ETCG addiction! 😆

[@Cantworship2gods]

I love watching you fix cars you make it so interesting and of course easy

[@mollypenderson2851]

Eric, you said stay dirty 3 years ago now my hands are dirty from no toilet paper! THANKS

[@yasmanibarajas7278]

Great video. I love watching your videos Eric, can't wait for the next one.

[@brandonstevens1832]

I come back to Eric's videos weekly.. I'm over the moon that he's approaching 2M subs but it should be 10M+ by now.

[@Jzzonem]

Makes me happy to see your son helping you like that. Thats nice. My son came out to work on the car with me the other day. All on his own.

[@freetibetpls]

If there was a reward for greatest KZbin content creator, I’d vote for you in a heartbeat. My dad and I are always blown away by how amazing you are.​

[@ericthecarguy]

Thank you!

[@brt-jn7kg]

You literally just answered all of my questions and fix the car thank you for posting this

[@cheesemons]

Nice.. not only dentist uses an inspection mirror! Stay safe Eric! you're my favorite KZbinr!

[@mikesara7032]

Awesome work, Thank you for making it simple and clear!

[@vijayantgovender2045]

Thank you Eric I always enjoy watching your videos I am from South Africa

[@kantiusaify]

Eric, Great video !!! Checked my 2011 Honda Accord K24 (2.4L) for oil leaks around the spool solenoid and everything looking good. All the Thermal Shield bracket & Solenoid bolts exactly same. I am conscious to change engine oil with Mobil-1 Synthetic & very good oil filter at regular intervals (do it myself), again your teaching. I will use your teaching when it's time to replace the VTEC solenoid gasket. Keep up the good work !!!. Many, Many thanks.

[@hugovasquez5535]

Great video Eric this was really helpful specially for someone like me that is taking the Honda PACT program.

[@lolosilao]

From all the videos I have seen you’re the only one with a better way to do this Gracias

[@TMK131979]

Great as always Eric. There is nothing I hate in a car more than oil leaks (besides dead engine) and it is a serious pollution source that we can control.

[@HarryESwan]

Great video... I had a huge leak on my 01 Civic from that solenoid, ended up changing that same gasket and the o-ring for the sensor (I guess is a oil pressure sensor)...Well guess what...The oil was leaking through the sensor it self🙄. Took me 2 tries to fix it.😎

[@BlueKhaos76]

I second that inspection mirror...it really helps when you can't see your path with certain fasteners on some motors. #SALUTE #XPOGUY #RESPECT

[@aserta]

Inspection mirrors, telescopic, and very, very good, dentist's mirrors. Essential tools when working in the engine bay during the troubleshoot process.

[@sphinx1390]

Such a common leak on these k24s great video as usual.

[@luisg1653]

Nicely done. I'll be doing this before the month is over on my Element.

[@Michael-fw5ef]

Eric, I love your Honda and Acura Videos. I hope you do an entire channel or sub-channel of just Honda and Acura uploads.

[@k_escobar917]

I did my valve cover gasket, oil filter housing gaskets now all I need to do is this vtec solenoid gasket repair and i will have taken take of all my leaks on my 08 Accord 👌

[@GgRae-gv1tg]

Eric, I just went through the same thing. It turned out to be the PCV valve which had clogged completely allowing excessive pressure to build internally. Really easy fix. The PCV is right past and above the alternator. 17mm and needle nose pliers. Love your channel.

[@LifeWithOG1]

Say whattt

[@GgRae-gv1tg]

@@LifeWithOG1 PCV VALVE symptoms are oil leaking and performance issues

[@LifeWithOG1]

@@GgRae-gv1tg my performance is great the leak is creating build up by the alternator. I notice motor oil leaking when i startup in the morning. I purchased a vt oil control gasket. I have a acura tsx 2012.

[@GgRae-gv1tg]

@@LifeWithOG1 Do the PCV $20. 10 min

[@marcoocone1781]

You are the best in doping mechanic repair and maintanance video I'm your follower from Italy almost 10 years

[@ericthecarguy]

Thank you!

[@eddominates]

Great Honda trick. part of the reason I got my honda so cheap was the owner was quoted $500+ to fix the "massive oil leak" ..$3.99 VTEC gasket, was back on the road within 15 mins, and holding oil. Also if your honda feels super slow and like its not 'cracking VTEC' itt's usually cause that screen on the gasket is clogged.

[@blakestone75]

Goaty McGoatface lol. My accord had that screen clogged. It wasn’t just “super slow”, it literally wouldn’t rev past 2.5k. ECU cut fuel at that point and set the CEL.

[@kevinrodriguez4385]

@@blakestone75 when u were driving ??

[@blakestone75]

Kevin Rodriguez I had just started up in the morning. Once I started taking off, the moment vtec would have engaged around 2.5k rpm it just cut fuel and wouldn’t allow me to rev any further. I stopped, shut the car off, restarted, and was fine from there on. But it would do this frequently in the mornings until I got the solenoid replaced. Or just the screen, I cannot remember.

[@gregunrau7031]

So with a 2011 Odyssey Honda doesnt sell the gasket separately. So you have to buy the whole freaking spool valve. And that replacement means you have to pull the valve cover AND the valve ???......$1500 later.....and the only reason I knew the spool valve was blown was because it ate my $900 alternator.......WTH?????

[@dan9809]

Is this screen that you speak of the same gasket that was replaced in this video? Or is this the screen filter on the front of the engine block on the left and is rectangular shaped?

[@user-px6qo2jr8x]

Always enjoy your videos you describe everything perfect I'm about to do the same job on my 2005 Honda Accord. I'm going to change and clean out the screen filter connected to the engine right behind the pulley tensioner also you're right it was cuz of letting my oil go too long and real dirty so nice to see this video.

[@isalmankhan1]

Thanks for sharing Eric👍 Accord's are always awesome, any model really great vehicles & reliable as well😉 Stay safe Bro❤

[@vladimiromarianetti3391]

thank you bro, i have a crv 2002, looks very similiar really appreciated your video!!

[@longjonz88]

I gotta do this on my dad's 03 accord this weekend and this video will be very helpful! thanks

[@nicholaspetre1]

Superb camera job! What a great video from a highly skilled mechanic!

[@TheLegendaryFolklore]

Your accountant tried to go somewhere else?! BLASPHEMY!!!

[@TJC450]

IIRC he doesn’t do small jobs like this anymore. So that’s probably why she went elsewhere. I remember him saying that in a video not too long ago.

[@kachunkachunk]

Oh man, I remember having an Accord of the same generation - K24Z3, with a TSB about sticking/problematic VTEC solenoids on cold starts. You get this awful rattling sound as it turns over. The first/home Honda dealer just denied the TSB being applicable for years, while trying all kinds of other things and wasting me time and money, stringing me along. After I moved cities, the next nearby Honda dealer/shop immediately addressed the bulletin (solving the cold-start rattle), updated firmware for the transmission, and did 3-4 other things that needed to be done. And all without charging a dime, despite being out-of-warranty by then. Anyway this video reminded me that I was also losing some oil, leading up to this fix-all shop visit. It's nice to still get occasional answers, years later.

[@TassieLorenzo]

Are you sure that was the VTEC solenoid? That sounds more like the issue with the similarly-named VTC solenoid, which is a different solenoid that runs the cam phasing.

[@kachunkachunk]

@@TassieLorenzo You could be right - it really sounds like it could have been the VTC solenoid - it was so long ago, though, and I don't have that work order sheet anymore.

[@rg_barrow]

Great video as always Eric!

[@psav1520]

I still think your repair videos are great. Thank you.

[@ericthecarguy]

Thanks!

[@juzeescobar5336]

Great videos you put out I enjoy them, I wish you had your shop close by so I can take my car to you because I haven't been using my car for months it's a bummer. 🙁

[@brookvalliant7813]

That gasket had a screen in it's lower section I'm sure you've noticed. If the oil is ever left to become gross it clogs that screen and prevents the oil from reaching it's destination. There is another screen on the front of the engine kinda hidden. Those two screens stopping oil cause issues with camshaft timing. The system is hydraulic and depends on a supply of oil to operate.

[@rusty6666]

Nice quick and easy fix there for sure great video Eric not a very hard job to do Thanks....

[@DrumeRGray]

Definitely a helpful video. I suspect the VTEC solenoid gasket on my 2013 Civic Si is leaking because I found an oil leak coming from the back side of the engine last time I did an oil change.

[@drummer4hire]

passenger side oil leak is a big give away

[@AntonioClaudioMichael]

Good informative video Eric nice and thorough

[@HristovRumen]

this was actually a good etcg video.

[@2174562267]

Hi Eric welcome back 🙏

[@nestorroman2694]

Thanks for the video ETCG1. 🔧👍

[@grullon120]

thanks for the vid eric really appreciate your help blessed

[@yambo59]

Excellent - ! Eric you are, the Honda guru.

[@user-ei9bq4oe3p]

Honestly wanted to throw a fit until i watched your video. If youre not an auto teacher then you should be because you are awesome! Thank you so much

[@benmetzloff9124]

I'm experiencing the same issue with my 07'accord ty for this video it helped tremendously

[@carolynekeeler]

Thank you for posting during this tough time - it helps us stay grounded AND learn better wrenching skills. Oil leaks are pesky to diagnose so your prep techniques are helpful!

[@1001Guitarplayer]

Some old school ETCG. Nice.

[@erobles1011]

Great video.... thanks , excellent camera angle

[@Mukeshmiktecrep]

Eric the favorite guy

[@KVaughnG]

I have a 2009 accord and my car just started leaking from the same spot... THANK YOU for this video. Going to try and see if it works

[@ganeshnarayan5505]

great video Eric.

[@charlesmoore1386]

Thankyou! Eric , I've been trying to find this leak for some time, That leak has stain my driveway, God bless😇

[@danielduran5815]

Great work! Thanks for the video!

[@mybrainmeatshurt]

I just did this on my RSX a couple weeks ago. It came out in one piece and still had a bit of pliability to it but it was flattened and leaking.

[@DanielRichards644]

I had this issue on my F22B1 in one of my 94 Accords, it was insane I was adding more then a quart of oil every week, driving like 50 miles a day

[@dannyhubert5722]

Great job Eric like always when are you and Timmy go race I'm going to bring the 🍺

[@billsmith4903]

Good diy video .Thank you Eric.

[@edwardcrews3766]

Great video and explaining procure thanks a lot

[@cheat2kil]

I have same car and did this job myself, oh boy it does take lots of time. There is a small filter infront of the block near the tensioner which also leaks sometime. Might change the valve cover gasket while your at it.

[@zoneb609]

Lots of time? It's the most easy repairs you can do on a k24 engine

[@davidd8435]

Much respect for a blind repair, remember keep your eyes on that 10mm they tend to disappear.

[@ericthecarguy]

👍 kzbin.info/www/bejne/o4ekZpx_mdGlmNU

[@EXccord]

10mm socket = the most prized possession

[@uchis2k]

What kind of camera do you use to position in the depths of the engine bay? Great info and love the import content! 👍🏻

[@theresacastillo5157]

Agree excellent camera viewing,👍

[@jaredstrehlein5605]

I have 2003 Accord 2.4L and solenoid is very similar, and if not the same. They are a little bit of a pain to access. For the most part ETCG is right it is a easy reapir.

[@jeremydunaway2912]

Huge help!!!! Thank you!

[@kenlemmond673]

"You can see better than I can!". I'm gonna add that comment to the 2024 Eric's Understatement of the Year database! I think it has strong potential but hey. it is January while I'm watching it! I'm going to try this on a 06 CRV now that I've gained confidence from watching your video. First things first. Off to Harbor Freight for a mechanic's mirror and a pick set! I'm actually fighting a P2646 but there is also a sneaky little very slow oil leak somewhere around that area. I may kill two birds with one stone. Wish me luck and thanks for being you!!!

[@shahrambarikhan]

Thats some good confidence, I would have checked the leak after installing the four Solenoid bolts, by running the engine for some while.

[@draco751]

For what it's worth, there is a 2nd gasket on the opposite side of the block (front of vehicle behind the alternator/PS pump) which looks like just a cover has found to be just as bad at leaks and almost harder to find. I thought for sure I had a leak from my 05 CR-V at the timing cover but after a good cleaning and some oil dye I spotted that small cover leaking really bad!

[@rupsyou997]

draco751 this is interesting because I've had my 05 Cr-v with an oil leak for the last couple years but three different mechanics have replaced gasket cover and some other things but it's still leaking. Another said it could be the rear main seal but they'll need to do another days worth of work to confirm etc etc

[@Thekaelanfamil]

whats that gasket called on that side?

[@arturoortiz5999]

@@rupsyou997 did you ever get it fixed? Same issue here

[@finley614]

@@Thekaelanfamil Honda Part No.: 15845-RAA-A01 Filter Assy., VTC. this is the gasket he is talking about which has two 10mm bolts holding on a little plate which is behind power steering pump and belt tensioner

[@EXccord]

@@finley614 To add on to Finley.... 15845-RAA-A01 = VTC Filter Assembly (on the block right behind the tensioner pulley - remove brackets and stuff holding PS Pump and move to the right side as much as possible. Remove tensioner assembly and boom) 15815-RAA-A02 = VTEC Solenoid Gasket / Spool Valve Filter Screen (Back of the engine being held on by 3x 10mm bolts) 91319-PAA-A01 = O-Ring (13X1.5 which goes with the VTC Assembly on the back I believe)

[@allendavis4662]

Keep up d gooode work my brother

[@SF-rl7hl]

Excellent video thank you!

[@MichaelBlast]

Oh thank God Eric is working on my car with my same issue

[@aigoru8718]

9/10 times in many new(ish) cars: An hour to get to the part, ten minutes to do the repair.

[@daviderhahon]

Eric had to become left-handed.😀 Nice video.

[@adrenalinatipica]

You are the man❤

[@doejoe5939]

nice one Eric

[@roconnor7778]

Do you have a video for the Honda V6 3.5L Vtec valve? Just had a fairly new alternator crap out and the warranty was void due to vtech gasket leak, fouling out the alternator. Thanks and appreciate all your videos.

[@desiefiautoelectrician7150]

GOOD YOUR GREAT TEACHER

[@horsekid98367]

Perfect timing, I've been putting off this repair on our 02 Crv for way to long, hoping to do it this weekend.

[@BethKnox32]

Howd it go

[@ahmedbamouh4936]

Thanks for the tip

[@MechanicalMikesRoadsideRepair]

The feel around with the finger trick to gauge where to put the socket hahaha I know that one too well

[@brettsuydam7457]

Pretty sure I did this on a 2003 Accord 2.4 when I had it, but the solenoid looked different. It's been a while though so I could be wrong. Definitely cleaned up a big oil leak though.

[@joshb5373]

great video

[@Pgcmoore]

outstanding!!!

[@ivanchicken2909]

Hey Eric- Thanks for all your helpful videos. Have a bad leak from the VT screen on 06 CRV, and there is oil all over everything on that end of the engine. Is it possible this much mess can be from such a small spot? Or am i going to need to look further? Does oil ruin an alternator, and is using brake cleaner harmful to it if i use it to clean it up? The brake cleaner is doing a spectacular job cleaning the other surfaces. Thank you for time.

[@Roarman57]

Thanks buddy!

[@tommygibson9515]

good job

[@blackjaminboy]

Very helpful! Luckily my 03' only had three bolts. Time will tell if that along with my valve cover was the sources of my leaks

[@ausseamore8386]

Once again thanks

[@Inferior_Machines]

Thanks again

[@Tycrx89]

Eric nice job nice angles with the camera I have a quick question I have a 2006 Honda element with a K 24 as well I’m getting code P2646 which is rocker arm assembly stuck open bank 1 the symptoms are bad oil low oil pressure, or bad assembly altogether I changed everything that you just changed including the entire assembly with OEM Honda parts the code keeps coming back not sure how to fix it could you tell me what this could mean or point me in the right direction possibly? Much appreciated

[@MisbahuA]

Hello Eric. Great video by the way. I have a Honda Accord 2006 with 103k miles on it. I recently had a oil pump problem that led to changing the oil pump after which I started hearing some weird noise coming from the engine compartment and the car starts vibrating excreting awful smell from the exhaust and also the engine light on my dashboard starts blinking. My mechanic doesn't seem to understand the problem. Please what could be the cause of these? Thank you.

[@kevinhollingsworth5816]

Awesome video. I have a 04 TSX that has an oil leak. I'm definitely going to check that now. One question, the AC system was low on the car and I tried charging it back up but I overcharged it a little and now the compressor won't turn back on. What makes the compressor clutch engage?

[@ericthecarguy]

www.ericthecarguy.com/faq/