Front Lock Carrier Service Position PLUS 04-09 Audi A4 B7

1A Auto shows you how to put your vehicle into the front lock carrier service position, which is recommended by Audi for a number of front engine services. This video is applicable to the 04, 05, 06, 07, 08 Audi A4
🔧 List of tools used:
• Flat Blade Screwdriver 1aau.to/oaht/1A...
• Phillips Head Screwdriver 1aau.to/oaht/1A...
• 10mm Socket 1aau.to/oVG/1AX...
• 13mm Socket 1aau.to/o4v/1AX...
• 10mm Triple Square Driver
• T25 Driver 1aau.to/orj/1AX...
• T30 Driver 1aau.to/orj/1AX...
• Ratchet 1aau.to/oaiS/1A...
• Socket Extensions 1aau.to/o4v/1AX...
• Torque Wrench 1aau.to/ova/1AX...
• Anti-Freeze
• Bungee Cord
• Funnel 1aau.to/ocY/1AX...
• Pick 1aau.to/ohN/1AX...
For More Info visit us at 1aau.to/h/beN/
⚠ DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

[@1AAuto]

√ *Watch the Video* √ *Buy The Part at 1A Auto* 1aau.to/m/Visit-1AAuto √ *Do it Yourself* √ *Save Money*

[@reesesty]

doing this in a walmart parking lot rn

[@gregdepetro4150]

This is the best DIY video I've ever seen. Fantastic job, thanks!!!

[@chrismonty69]

Thanks to A1 auto for this clear and very helpful instruction, helped me out big time. AWESOME 😎😁

[@dominicandawg3455]

Thank god for this video!! I’m doing the HPFP on my 06 b7 3.2 fsi v6 and I need the space so I can slip my ratchet into the tight space

[@philippedurieux3970]

Thank you ! This video helped me a lot to change my engine fan on my Seat Exeo (identical to Audi A4 B7) !

[@1AAuto]

+Philippe Durieux Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c

[@jonohiggins5903]

Fantastic step by step, just used this to swap my radiator fans and can belt. Many thanks

[@1AAuto]

+Jono Higgins Thanks for checking us out. Shop here for high quality auto parts: 1aau.to/m/Shop-1AAuto-c

[@napper1496]

Timing belt? Mines is chain at rear of engine. Great video tho .nominated for next Nobel prize I think

[@aussiemarsupial7888]

The audi a4 b7 (2005-2008) has a timing belt in the front and a “timing” (cam) chain in the back

[@christopherthomas5972]

Great video

[@enlightenedtrucker739]

Nice vid. Is the procedure similar for a 2001 B6 A4 2.0?

[@1AAuto]

+enlightenedtrucker The installation process should be similar for your vehicle as well.

[@Kron1564]

you don't have to remove that rebar piece, all I did was break a bolt off holding it on, then removed the pieces the rebar was bolted to, and it all came off, wish I didn't do it this way

[@pekka75]

I miss the Volvo 240 engine compartment 😢

[@Never77more]

What kind of Gloves are you need?

[@1AAuto]

+Marc-Andre Bohnenkamp Thank you for checking us out. You may use any gloves to ensure that dirt, oil or other things are not placed on your hands. 1aauto.com

[@snoopy5736]

None, wash your hands when your done