How to Replace Install Side Mirror 07-14 Chevy Suburban

[@1AAuto]

√ *Watch the Video* √ *Buy The Part at 1A Auto* 1aau.to/m/Visit-1AAuto √ *Do it Yourself* √ *Save Money*

[@andreslaughter94]

I have a 2010 Chevrolet suburban I cannot put a side mirror back on

[@karamalkowski286]

Bought a replacement mirror from A1 Auto and changed it out on the passenger side using this video. Excellent, clear instructions and mirror fit/operates perfectly. The only thing I did differently is NOT take off the foam sound panel. It’s not necessary since the mirror power cord is placed so high on the door. THANK YOU for making this repair possible in my at-home garage!

[@Randomshortsbutcute]

Really appreciate the time you took to make this instructional video. I followed it point by point and successfully installed a new passenger side mirror.

[@thomaskaekel6070]

Just installed these side mirrors on my 2008 Tahoe LT. Total time was less than 1.5 hours for both sides. My dealership wanted over $1000 to change these out! So far they are working perfectly. Thank You A1 for providing the very helpful video and reasonably priced aftermarket part. TK

[@1AAuto]

+Thomas Kaekel Thank you! We love empowering our customers and showing how to perform DIY auto repairs with our high-quality auto parts. 1AAuto.com

[@MyVeryHappyDay]

This video, and the part from 1A Auto, are both FANTASTIC! I replaced the right passenger folding mirror on my 2009 Chevy Tahoe LTZ in less than 30 minutes. Even though this video is for a Suburban, the 2009 Tahoe door was EXACTLY the same. I am not a mechanic; it could not have been easier. The new electronic folding mirror arrived on time (4 days) and works perfectly. Make sure you order the correct mirror (driver/passenger, heated, light on bottom, blind zone, etc.). The dealer quoted $700 - my cost was $185 for the mirror and $0 for cheap labor.

[@1AAuto]

+Happy Day Thank you! We love empowering our customers and showing how to perform DIY auto repairs with our high-quality auto parts. 1aau.to/m/Shop-1AAuto-c

[@michaeleke6645]

Thanks for the awesome video, very detailed and easy to follow. Dealer quoted over $500 to replace driver side mirror that no longer folded in on my 2008 Suburban. Other GM Parts online stores the part cost ~$350. I ordered the part from your website for $120 and followed your video step by step, took less than an hour and works great. Thanks again!

[@KevinGonzalez-en8fd]

Does it also have the on mirror turning signal? How is now 1 year later?

[@chuck2121]

1A Auto…thank you. So easy to follow along. Second time I’ve used this video.

[@chrisl4999]

Perfect. Thank you. I just replaced my drivers mirror after someone knocked it off. It was an easy job because of your walk thru.

[@RdandTrk1]

Just did this job using this video. I'm not even close to a mechanic, only somewhat mechanically inclined. This video made it so easy. You guys are awesome. Thank you for your video.

[@angelomontoro1472]

What else can I say but thank you. Your video was amazing and the steps were exactly what I needed to get the job done.

[@lisaaversa7655]

Bought the mirrors from 1A Auto Parts & installed them today along with your video! Awesome stuff, guys!

[@1AAuto]

+Lisa Aversa Thanks for checking us out! 1AAuto.com

[@thetootall]

Thank you! Replaced mine in 20 minutes with this walkthrough!

[@JenniferF2882]

Is there an easier way to tighten one that's loose?? Do I really have to disassemble my entire door??

[@firstdaywithnewbrain2504]

I ordered these mirrors from y’all. Just got them in yesterday. Thank y’all so much for the instruction videos for things like this. It saves us “DIY” guys a boat load of money. 👍 I’m actually looking forward to replacing them tomorrow.

[@1AAuto]

+First day with new brain Good luck with your install!

[@debnogle1885]

thank you so much for sending the correct part(which was a drivers side mirror for2011 suburban) and also the video showing how to replace, excellent job

[@RLogan-sl7xl]

5 minutes into it and I’m thinking hell, I just want to replace the mirror WTH

[@jbarryclkrec]

This is exactly what I needed! My LTZ passenger mirror no longer retracts in and I was looking for something like this to walk me through the door panel logistics. Thanks!

[@1AAuto]

+Jeffrey Barry Thanks for watching. If any of our viewers needs to make this repair, we carry the auto repair part shown in this video on our website. Here is a link to them: www.1aauto.com/mirror-driver-side/i/1amre01766?KZbin&CTA+Comment&

[@TheSlurrakane]

You guys made this so easy. Thank you so much. It is so much less difficult than I anticipated.

[@driverjohns6051]

Thank you for the video. I ordered the part from you and installed it. Easy to follow video with great details.

[@1AAuto]

+Driver Johns Thank you for your feedback and your business!

[@vycariousone]

Very useful. My truck differs slightly, but this video definitely helped me get the job done. My truck has a handle over the buttons that needs to be removed first. Plastic pry tool to remove the cover and 2 more 10mm bolts underneath.

[@joemartinez7913]

Saw this done in another video where you don't have to completely remove the door panel, just as long as you have enough room to clip the wires off. Then just replace the mirror and feed the wires back. No need to remove the cable to the door handle or the entire panel.

[@hollygast9858]

Would you happen to remember which video that was? Thanks!

[@jamesmorgan8639]

Great video. Thank you....just installed mine following your steps. Very easy thanks to this. I also ordered the part from you!

[@meredynovinfitness]

Awesome video! Replacement done, and it works fantastic!! Thank you!

[@graff4143]

Thanks for this video as it helped me a great deal.

[@majorwilkesjr.5827]

Thanks for the video. It is way easier than I thought it was going to be. I'm no mechanic, but I think I'm just bright enough to handle this myself LOL.

[@1AAuto]

+Major Wilkes Jr. Good luck with your install!

[@InfantryGeek]

Thank you for such a detailed video.

[@cws4657]

Great video very helpful thanks!

[@1979bturner]

Great video ordered the part and installed it myself!!!

[@joshuaarnold8563]

Great video, thanks

[@richardburns9772]

Can you replace the arm rest individually?

[@andreslaughter94]

I have a 2010 Chevrolet suburban how can I put back a side glass mirror back on

[@laidspipe]

I purchased mirrors for my avalanche from you guys. Power folding but my driver side doesn’t fold all the way. It’s halfway only. Any suggestions?

[@1AAuto]

+Repent Time running out Have you done a sync? Please contact us directly at 888-844-3393 or [e-mail] and we can pull up your order and assist you further.

[@adrii350]

Where can I find that part at 0:41 seconds just bought a mirror from 1A replaced it and to my luck that part broke off 😳🥺

[@1AAuto]

+Adriizz Galvan We do not offer the trim piece for the mirror. We do apologize for that.

[@paulkaufman4901]

Excellent Detailed & Complete Video! I really appreciate the quality of your videos and I use them often. Another tip to add: Instead of painter's tape, I use a small piece of a paper towel. It provides a great friction hold on the bolt and falls free after installation easily. 🙂

[@caution_xray]

Thanks! 🤙🏽

[@GTARadioFan]

What if I installed Turn Signal Mirrors instead? My 2007 Suburban is the LT trim but I’m not sure if it’s plug and play or not?

[@peternotarfrancesco2614]

My 2009 Suburban has Turn Signal Lights and this is very similar the only difference might be a different plug.TWAS PLUG AND PLAY for me. Sometimes you have to cycle the mirrors in/OUT to get them synchronized after installation.

[@marcussansonejr5005]

It sure would have made things easier if GM would have put the harness plug right where the mirror bolts to the door behind the foam piece!!! Great video though! Definitely a help!!!

[@peternotarfrancesco2614]

Greetings Marcus my thoughts exactly if I had the time and inclination I would have made an extension cable and made a disconnect behind the triangle piece. Don’t know if there is enough room to make it. But wouldn’t it surprise the next peep who had to chance the mirror.! OH BLESS YOU PREVIOUS OWNER 🍺☕️🥤🍮🍭🍰🧁🍦🍨, I replaced the passenger side mirror on my 2009 Suburban and did not remove the door cable I just supported the door and R/R the mirror.

[@langkhach237]

Great advice

[@Maddog3340]

Great video

[@Maxxarcade]

I wish there was a shop like you in my area. Everyone around here is nothing but money grabbing scammers.

[@kethomas1220]

Can I possibly get you guys to do a video on how to change the rear quarter panel (the whole thing) on 07-09 Suburban? Some people call it outer body panel and some quarter panel even though it is 1 big piece from the top of the vehicle, around the window and to the wheel well. Thanks

[@1AAuto]

+Ke Thomas Thanks for watching! We'll pass that along to the mechanics to try and add it to their list of repairs to film!

[@danhorn7102]

Awesome Vid. Gonna tackle the job today.

[@1AAuto]

+Dan Horn Thanks for watching. If any of our viewers needs to make this repair, we carry the auto repair part shown in this video on our website. Here is a link to them www.1aauto.com/mirror-driver-side/i/1amre01766?KZbin&CTA+Comment&Ux30jWNVI

[@sonjoytalukdar3600]

Nice

[@1AAuto]

+Sonjoy Talukdar Thanks for checking us out! 1AAuto.com

[@andrewprimeaux80]

Hi, I ordered and installed this mirror on my 2007 Tahoe. Everything is working great, except that the power to my door switches stays on after turning my vehicle off causing my battery to drain. If anyone can offer any help so that I can fix this issue it would be greatly appreciated!

[@smasher.338]

Look up how to do a manual reset of your power windows. That might fix your problem.

[@ColtraneLK]

These instructions were great but how do you calibrate the mirror to fold in?

[@1AAuto]

+LeeAndre Coltrane Set the mirror control switch to the center position. Press the power fold switch rearward to cycle them in and out 4 times. When you hear an audible pop then the power folding mirrors are synchronized. 1aauto.com

[@ColtraneLK]

Thanks worked like a charm.

[@madrcdad7677]

Same process for a 2009 Chevy traverse?

[@1AAuto]

+Rodin Ramos Thanks for watching! No, it will be a different process on a Traverse. Here is a link to our website that has two videos for your application! www.1aauto.com/mirror/i/1amre02308?f=627435&y=2009

[@outragedgamer1288]

Why on earth would they design it this way. Why not make it user friendly simply by making the wire on the mirror short and having the bulk of the wire set in place and a connection to connect the wires up at the top so i Dont have to take the entire door apart. This is so annoying

[@lyndellprosper]

Same process for an 07 escalade?

[@1AAuto]

+Lyndell O The installation process should be the same for the Escalade as well.

[@lyndellprosper]

@@1AAuto thankyou sooo much...