How to Replace Front Exterior Door Handle 03-08 Mazda 6

[@1AAuto]

√ *Watch the Video* √ *Buy The Part at 1A Auto* 1aau.to/m/Visit-1AAuto √ *Do it Yourself* √ *Save Money*

[@eddysel10]

Thank you very much for this great video. Based on your instructions, I was able to dismantle the interior of the door and assemble it again. A inner part (I don't know the name) of the door handle was broken. I wasn't able to replace it (maybe you can send me a link where I can find the parts needed) but I tight it up for the time being. Great instruction!!!

[@1AAuto]

+eddysel10 Thank you! We love empowering our customers and showing how to perform DIY auto repairs with our high-quality auto parts. 1AAuto.com

[@osvaldorobles4965]

I really loved your video and the patience you do it, thank you

[@twowheels222]

Pro Tip: if you only need to remove the door lock cylinder [because some $#!% destroyed it with hammer and chisel], the pull handle and the interior door panel do not have to be removed. Instead, pull off that foam piece that is just stuck on to cover a large hole in this panel. Remove the screw holding the lock in place (seen after removing that grommet), then rotate the lock clockwise. Out!

[@TheDucaticol]

Can you dismantle the panel with the door closed or does it need to be open???

[@1AAuto]

+TheDucaticol Thanks for watching! In order to remove the door panel the door will have to be open.

[@kj.25t]

Hey man I saw your comment and don't know if you already solved it but my door was also broken and I was able to disassemble the door while it was closed. It helps alot if you unbolt the seat and tilt it so that the backrest is behind the seat on the other side. Here's a video on how to do it: kzbin.info/www/bejne/Z2XVp3uQerRneJY

[@EricMoxon]

Hi, my door handle had been feeling loose, but still works. I figured a nut or bolt came loose somewhere and just needed tightening or replaced. But I just got down to the two mounting bolts for the handle itself thanks to the video, but they both seem tight so I'm not sure what's wrong? 😮‍💨

[@DrCheeks]

6 minutes in and it’s already waaaay beyond my capabilities..😁

[@superariosto]

I have a Mazda 5, None of the front door work. I was able to partially dismount the right (passenger) door and the door handle has a broken piece. I am not sure If I can fix it. The left side (door handle) got locked and will not open. This happen 3 days ago. Not sure how I can dismount the door.

[@IvanMagic06]

Handy guy myself but is it there a way I can just tighten mine? It works but the opposite end of the lock is coming loose. I don't want to have to take the whole door apart for that 😅😅

[@milkweasel]

How similar is this door to a 2007 Mazda 3? I can't find a decent video for that replacement.

[@1AAuto]

+milkweasel This procedure might be different for your application. We do not currently have a how-to video for this particular year, make and model. Thank you for asking! 1AAuto.com

[@bobsoft]

Its pretty much the same procedure. I just had one apart to replace a door lock actuator. The exterior door handle comes apart the same way.

[@goodcome7737]

非常详细， 感谢 thx

[@waltervila33]

This looks like a royal pain in the arse

[@aaronlechliter4084]

There has to be an easier way without disassembling the whole inside of the door. This is not DIY

[@micxploed]

The title says "exterior" door handle... And you're replacing the interior door handle?

[@micxploed]

Not so good with the push tabs this mechanic. 😁