PPF Installation DIY Tips | How To Bulk Wrap Car Door Handles like a PRO!

In this video, Eric goes over how to properly bulk PPF wrap door handles using their Defense+ Paint Protection Film.
Join this channel to get access to perks:
/ @driveprotected
If you have any questions, comments or concerns regarding installing PPF, please feel free to email Eric at [e-mail]
To save 20% on our Car Care line use code "PROTECTED" at checkout
Find our Car Care Line here: driveprotected.shop
Follow Eric on Instagram: @eric_sawatzky
Follow us on Twitter: @Drive_Protected
Follow us on Instagram: @driveprotected.shop
Follow us on Facebook: @ Drive Protected Shop
______________
LIKE.SHARE.SUBSCRIBE.
Give this video a thumbs up if you enjoyed watching 👍
#howto #car #install
Thanks for watching the video PPF Installation DIY Tips | How To Bulk Wrap Car Door Handles like a PRO!

[@syedmohaimenulislam3997]

Thanks for showing us the right way . Awsome video.

[@ohmrai4255]

Great video! Creative ideas. Thank you for sharing your knowledge.

[@abellaadams]

I really appreciate the effort you put into making this video.thanks ❤

[@wolfcricfever922]

i appreciate your efforts you put in making video. i understand every point and step ! Thankyou

[@racheleva5810]

Very detailed tutorial, I can now wrap my door handle on my own. Thankyou.

[@mauricioalvarez6168]

This is amazing work, i was learn so much. thank you very much

[@a4agrorabufm928]

Great idea,thanks for this pro idea with all. Your detailing is so good. It’s really works.

[@jazzyboi365]

A wonderful tutorial thanks for sharing this with us and Its really useful🎉

[@isaiassousa8964]

Great content, simple and objective on how to pack PPF door handles in bulk, congratulations for the video!

[@Skyfter.Nimani]

Thank you for the Pro tips. Nice video as always. Greetings from Germany ☺️

[@fajrinmuhammad5533]

this is amazing to see how to bulking wrap door and this is very helpful for me to knowing. thanks for make this amazing video

[@Echaji]

Thanks for sharing your information about How to bulk PPF wrap door handles,it's help me a lot

[@Sivarwraps]

It looks really good and helpful

[@baster85]

very useful and professional video about How To Bulk PPF Wrap Door Handles, thanks

[@vitordebem1346]

I really love this PPF Pro Tips!! Amazing!! Thanks for share with us...

[@DriveProtected]

Glad you found value!!

[@aldovirzi809]

You're just awesome, mate. Great job. I especially like how you don't over hype your videos and carry on like a super excited school kid. Thank you for sharing your knowledge.

[@user-vk9lj9ku2d]

Thanks for sharing this Pro tips. I have learnt about this tips from your great content.

[@k2mobiletint619]

Great job

[@bhashi1]

Nice content and greet work..💪

[@RichardLin]

This video helped me tremendously on wrapping some Escalade door handles that I’m doing in matte. Thank you!

[@DriveProtected]

Glad you found value in the video!

[@oprajitaorpita4848]

Wow,, its really amazing tutorial video

[@maiarhashem8631]

Excellent,the video is very perfect,thank you for information

[@DriveProtected]

Glad you found it valuable!!

[@udayabhaskarb6811]

We Purchased a New Car & this CAR PPF wrap door handle will Defense & Protect Paint Film. Thanx for the Tip Sir

[@AhmadAhmad-um8on]

شرح احترافي شكرا❤❤🎉

[@Kobivinyl]

❤ nice work

[@jaspalsing6290]

Good

[@nikolapetrovic6564]

woow you are pro i was always wondering how to wrap door handles, i know im not good as you butt i pick up some thricks that you provide and i can make my car a little bit fire ;) keep up good work

[@DriveProtected]

Thank you!!

[@jarededwards5831]

very nice

[@natigmammedov4]

Great video. thank you. I would like to know while doing the door, should I remove the door handles, or just go around it. Do the seams collect the debris and become visible over time?

[@DriveProtected]

If you have a good quality pre-cut pattern, go with that. If you don't, then remove the handle and install like that. Hope that helps!

[@incejo1]

Hi i really appreciate the effort. I would like to see if its possible to do ppf on 2nd piece of door handle. Only then it would be complete. Just wanna know whether it can be done without any release cut

[@DriveProtected]

Done without relief cut.

[@Sandbergo7]

I feel sort of stupid for not trying this on a Ram TRX we have at our shop. Def gonna try it next time. Thanks.

[@automassagedetailing]

Thank you for this. I'm doing a full wrap on a Toyota Tacoma TRD Pro. The letters are molded (punched) in to the tailgate and bedsides. How would you handle that? Heat the film and stretch it in the the recesses of the letters? It's pretty intricate/detailed.

[@DriveProtected]

Check this video out! PPF Pro Tips - How To Lay PPF In Super Duty Letters *TRICKY* kzbin.info/www/bejne/j3nRh4CMithnY7M

[@rrandles5301]

Great videos. I'm new to this. I've done a few door sills on my vehicles and am considering 1st six inches of hood and front bumper area. What PPF film(s) and mils do you use? I've been using 3M PPF but it doesn't seem as stretchy as what I've seen you use on door handles and fenders.

[@DriveProtected]

We use our Defense+ PPF and its 8ml thick.

[@repairitdontwreckit4257]

Excellent video. Stretching is so important for a perfect looking job. Lots of training and practice required.

[@ljames7724]

What is the slip solution applied on the clean handle, prior to pot application?

[@DriveProtected]

Johnsons baby shampoo and distilled water.

[@nikopacundo148]

Can i ask what's your tuck solution made of?

[@DriveProtected]

Just hot water.

[@nicholasposa5661]

what is your hot water tack solution? Ive had some success with hot water but there are some drawbacks

[@DriveProtected]

Hot water. Refill after each panel.

[@Fadic4]

Do you have any videos of a full door PPF install? Not sure how to deal with the door handles with a bulk install.

[@DriveProtected]

We do not have a bulk door video unfortunately.

[@Fadic4]

@@DriveProtected do you just not recommend doing doors bulk? Was thinking of doing my 4Runner but not sure what to do about the handles. I might just try removing the door handles and reinstall them after the PPF is installed.

[@DriveProtected]

@Fadic4 if you’re going to go bulk, definitely remove the handle for a cleaner install.

[@renzirealestate1513]

Can you tell me what is the brand of ppf

[@Gerard-Matheus]

What would you suggest PPF cutting should be done by hand or by plotter?

[@DriveProtected]

Depends on the situation. Matte door handles? Definitely bulk.

[@ramsesramses9655]

What ppf thickness did you use here and what do use generally?

[@DriveProtected]

This was 8ml thick.

[@chuchaw417]

Why don't you use glove? Wont it get fingerprint marks on the f film

[@DriveProtected]

No it won’t.

[@etdancer]

Are you just using hot water for tack ? Nothing else?

[@DriveProtected]

Correct. Just hot water.

[@etdancer]

@@DriveProtected Thank you for the reply. I'm doing a front bumper lower spoiler and I'm concerned about the curve on the spoiler.

[@vanshchouhan8948]

What do you mean by bulk

[@DriveProtected]

Bulk means not using a pattern. Just one large piece of film that needs to be trimmed off once installed. Hope this makes sense.

[@vanshchouhan8948]

@@DriveProtected yeah i got it thanks your videos helps alot 👍🏻👍🏻