How to Replace Parking Brake Shoes 2011-2018 Ram 1500

Shop for New Auto Parts at 1AAuto.com 1aau.to/c/254/a...
This video shows you how to install new parking brake shoes on your 2011-2018 Ram 1500. For drum brakes and parking brakes, shoes will eventually need to be replaced.
This repair was done on a 2016 Ram 1500 SLT 3.6L Crew Cab Pickup 4-Door 4WD Automatic and the process should be similar on the following vehicles:
2011 Ram 1500
2012 Ram 1500
2013 Ram 1500
2014 Ram 1500
2015 Ram 1500
2016 Ram 1500
2017 Ram 1500
2018 Ram 1500
🔧 List of tools used:
• Flat Blade Screwdriver 1aau.to/obCJ/1A...
• Pry Bar 1aau.to/o57/1AX...
• 13mm Socket 1aau.to/obXZ/1A...
• 21mm Socket
• 22mm Socket 1aau.to/orm/1AX...
• 8mm Socket 1aau.to/obAA/1A...
• Brake Caliper Hanger 1aau.to/omC/1AX...
• Trim Tool Set 1aau.to/oasR/1A...
• Needle nose pliers 1aau.to/oH4/1AX...
• Needle nose pliers 1aau.to/oH4/1AX...
• Ratchet 1aau.to/ob2A/1A...
• Torque Wrench 1aau.to/oa5m/1A...
• Anti-Seize Grease
• Brake Parts Cleaner
• Cloth Rags 1aau.to/oLH/1AX...
• Copper Anti-Seize
• Gear Oil
• Gloves 1aau.to/oaRS/1A...
• Pipe Thread Sealer
• RTV
• Safety Glasses
• 14mm Hex Socket
• Drain Pan
• Floor Jack 1aau.to/oar4/1A...
• Hammer
• Jack Stands 1aau.to/oaec/1A...
• Magnet - Extendable
• Razor Blade / Gasket Scraper
• Wheel Chocks
Subscribe: / @1aauto
Check out our playlist:
Ram 1500 3rd Generation 2011-2018: • Ram 1500 3rd Generatio...
For More Info visit us at 1aau.to/h/fKv/
⚠ DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

[@1AAuto]

√ Watch the Video √ Buy The Part at 1A Auto 1aau.to/m/Visit-1AAuto √ Do it Yourself √ Save Money

[@JohnC686]

You do not need to pull the axles to change these pads. It definitely makes it easier to access the pads and hardware, but not required.

[@Justacogg]

I watched this video and found it very curious that you didn’t mention all the repairs done during the video camera being turned off. Why? 1.At first glance, I could see the rear backing plate magically became brand new without so much as even a mention of its replacement! 2. Then I could see the rear axle bearings and seals being instantly changed without so much as a mention why they were changed. As if by magic the parts were just changed. 3.Then cleaning the rear differential cover, obviously a power tool was used that was not shown. Also, why at the last second does a bright red caliper show up on the truck? Your videos have been really great and then in the past and this one I can’t understand? Please bear in mind this is not a criticism in anyway. The work you did was excellent. The parts that one sells I’ve never had a problem with. That being said why not include the entire job and the video and let people know that you sell axle bearings, and seals and possibly backing plates? It would be a more profitable video for A1 auto and give your customers a more complete complete video without falling into pitfalls! I think maybe an explanation at the end of the video might be an order. If I just ordered the brake shoes and hardware and took that truck apart, I’d be pretty pissed that I wasn’t alerted so many other things should’ve been ordered and I could’ve gotten it done all in one day.

[@jakeblumer5700]

Don't need to pull axels... and you never let the viewers know how to get into neutral with these trucks...

[@robertsmithjr.5839]

Are they on both rear wheels? Your video showed just the driver side. Thank you

[@rapache1]

Thank you for posting and yes it helps

[@johnfowler6189]

I'm assuming that wasn't a limited slip diff?

[@jimwebber7451]

So you only replaced one side? Why no explanation about this?

[@concernir]

Info,