ZOHD Talon GT - FPV Setup - Flights - Review

🔥 🔥 🔥 🔥 FULL SETUP AND LINKS IN DESCRIPTION BELOW ⬇️ ⬇️ ⬇️ (Click 'SHOW MORE'👈🏻 )
ZOHD Talon GT PNP ► tiny.cc/TalonGT
My review of the ZOHD Talon GT. I tried to keep it as short and to the point a possible, but please feel free to give feedback if you think there's something I missed. All of my reviews are genuine and I will always highlight any negative's or points for attention.
☕️ 👋🏻 Hey, thanks for watching! If you enjoyed this video or found it useful and would like to show your appreciation/support for my channel, why not buy me a coffee :) ► tiny.cc/BuyAdam...
🔵 Follow me on my Facebook page for updates, build logs, chat, random pictures & vid clips that don't make it to KZbin: / adamgdoesfpv
📷 Follow me on Instagram @adamgdoesfpv ► tiny.cc/AdamGon...
Sites I get my awesome FPV goodies from:
✅ Banggood ► tiny.cc/Banggoo...
✅ RMRC ► tiny.cc/RMRC
✅ HobbyKing ► tiny.cc/HobbyKing
✅ Gearbest ► tiny.cc/GearBes...
========Links to other items mentioned in video========
-Useful Foam Cutting Tool (used to cut wire channels in wings) ► tiny.cc/vxgv0y
========Talon GT Setup========
In the Air:
-ZOHD Talon GT PNP ► tiny.cc/TalonGT
-Flight Controller Matek F722 Wing ► tiny.cc/MatekF722
-1.2ghz Video Transmitter ► tiny.cc/kwcv0y
-8M M8N GPS (fits in Talon GT GPS bay!) ► tiny.cc/wwyh7y
-FPV Camera ► tiny.cc/9scv0y
-HD Camera ► tiny.cc/k4cv0y
-2 x Tattu R-Line 1,550 95c 4S ► tiny.cc/TattuRl...
-True RC Singularity Antenna 1.2g ► tiny.cc/Singula...
-Dragonlink Micro RX ► tiny.cc/DragonL...
On me:
-Taranis Transmitter ► tiny.cc/f6cv0y
-Dragon Link V3 tx ► tiny.cc/DragonL...
-SRH771 diamond antenna ► USA link: amzn.to/2gG50ZU -
UK link: amzn.to/2yiHpZo
-Fatshark goggles ► tiny.cc/o7cv0y
-FuriousFPV True-D Rx module ► tiny.cc/n9cv0y
-Bignose custom made 5.8 skew ► tiny.cc/cxcv0y
On my Groundstation:
-K&F Concept Tripod ► 🇺🇸USA Link: tiny.cc/GS-Trip... 🇬🇧UK Link: tiny.cc/GS-Trip...
-1.2 ghz VAS Pepperbox antenna ► tiny.cc/6adv0y
-2 x RMRC 1.2ghz VRx ► tiny.cc/hbdv0y
-Diversity Demon ► tiny.cc/ubdv0y
-DVR ► tiny.cc/9cdv0y
-Turnigy 5000mAh 3S ► tiny.cc/2ddv0y
-25mw 5.8ghz repeater vtx (to send the video signal wirelessly from my 1.2ghz ground station to my goggles) ► tiny.cc/cedv0y
-Digital Volt Meter ► tiny.cc/gfdv0y
-Eachine Diversity Monitor with DVR ► tiny.cc/ehfv0y
========3D Printing Equipment========
-3D Printer ► tiny.cc/qql96y
-PLA filament ► tiny.cc/EryonePLA
-TPU filament ► tiny.cc/Sainsma...
-PETG filament ► tiny.cc/Sainsma...
-Digital Calliper ► tiny.cc/Digital...
========Build equipment========
-E6000 glue ► tiny.cc/E6000Glue
-Laminating Iron ► tiny.cc/Laminat...
-Laminate ► tiny.cc/laminate
-Hot glue gun ► tiny.cc/HotGlueGun
-Foam Cutting Tool ► tiny.cc/vxgv0y
-Heat Gun ► tiny.cc/Adjusta...
-Watt Meter ► tiny.cc/WattMeter
-3M90 spray adhesive ► tiny.cc/3M90adh...
========Other Video Equipment========
-Macbook Pro ► 🇺🇸 tiny.cc/Macbook... 🇬🇧 tiny.cc/Macbook...
-External Hard to Store Final Cut Pro X projects ► 🇺🇸 tiny.cc/Seagate... 🇬🇧 tiny.cc/Seagate...
-Computer Mic ► 🇺🇸 tiny.cc/AU-GM30...
-DSLR ► 🇺🇸 tiny.cc/CanonDS... 🇬🇧 tiny.cc/CanonDS...
-Camera Lens ► 🇺🇸 tiny.cc/Canon50... 🇬🇧 tiny.cc/Canon50...
-Handheld Gimbal for DJI Osmo or GoPro ► tiny.cc/Handhel...

[@AdamGdoesFPV]

***UPDATE***: The day after I posted this review I went to fly this model and found that the motor was making a nasty noise. I opened it up and the magnets have come loose. It appears that this is a known problem and ZOHD have claimed this is QC issue with an early batch. Luckily I spotted this while it was on the ground and I didn't have an issue in the air. I have messaged ZOHD and will do a mini update video once I get a reply from them. If you have one of these or are thinking of buying one then I strongly recommend you keep an eye on this motor or don't use the stock motor. I have a spare Sunnysky motor that I have for my Mini Talon so i've jut put that on.

[@AdamGdoesFPV]

Update: After contacting ZOHD regarding this failed motor they very quickly replied with an apology and an offer of a free replacement motor. I'll update here again soon.

[@AdamGdoesFPV]

Update: I have received the replacement motor. Interestingly enough it is a branded Sunnysky motor, but still has the ZOHD branding on it too. It is also labelled as the version 2 motor so you'll know which one you have. I'll do a short video update soon. Oh and i have flown with it, working great after 2 flights and I'll keep an eye on it (original one was fine at this point still too)

[@AdamGdoesFPV]

Talon GT Update - Failed Motor Replacement & New Upgrades kzbin.info/www/bejne/Y3nJZZaIr7Gngac

[@Tyr1001]

I think the instability in turns is due to the V-tail. Aircraft with V-tails tend to yaw a lot during certain maneuvers

[@AdamGdoesFPV]

That could be the case... I just haven't had the same issue with any of my other V tails though 😕

[@Tyr1001]

@@AdamGdoesFPV I may be mistaken, but I believe they said on their sight this one was not redesigned for the v-tail, they just made another version that had it. Aircraft with V-tails have longer than normal empennages to correct for some of the quirks they have, so an aircraft not specifically designed for it may have these effects more pronounced. Not very helpful i guess, but something to think about at least

[@helomike7000]

Excellent review! Thanks for sharing.

[@AdamGdoesFPV]

Thanks Mike 😎

[@TheSlumpen]

Really a nice and honest review! Have you tried moving the CG forwards to prevent the stall?

[@AdamGdoesFPV]

Cheers :) I actually can't move the CG with the current batteries as they are right up front... but I might try a bigger lipo and see how it goes.

[@drbernhard438]

@@AdamGdoesFPV and? did you try it? :-)

[@leivurjoensen190]

I heard a few others had to move the cg backwards, not forwards, and it made a big difference. By a full centimeter.

[@brendendas]

After this video I'm honestly contemplating getting this.

[@AdamGdoesFPV]

Superb compact! You'll love how effortless it is. However, please see my latest update about my issue with the motor. ZOHD claim this was an issue with the first batch so they SHOULD be ok now... but please keep an eye on it. Thanks for watching and commenting Brenden :)

[@DelaneyKassab]

Bored during lockdown, want this model so bad but on back order everywhere!

[@AdamGdoesFPV]

How odd. Not sure why... Maybe they are planning an updated version release soon like they have just done with the Dart XL

[@JohnDoe-eo8gi]

I have a Nano talon and had a similar experience in turns. The nano talon also had horrific stall characteristics. I 3D printed some vortex generators for the wing tips and that solved all my problems

[@AdamGdoesFPV]

Interesting, thanks for the info :)

[@wad5uk]

Nice informative video.

[@AdamGdoesFPV]

Cheers mate :D

[@HaukLanglo]

Your dip to the left looks like a classic wingtip stall. That antenna placement may cause weird turbs on that tip. Also check if you're heavy.

[@AdamGdoesFPV]

The wight is low enough but the lipos can't be moved any further forward. I might add a heavier lipo and move CG forward slightly to see how it goes. Cheers :)

[@AdamGdoesFPV]

@Dominic Douglas Interesting, thanks for the info, I'll have to consider trying that then. You'll be fine with CG then, a GP7 I expect is heavier than the RC2. Along with the motor mount, keep an eye on the motor. I have version 2 just arrived and I'll do a quick update video soon. Cheers

[@egtreadway4232]

Great honest review, I'm in process of building this plane but looking at the Chinese manual i can't determine if its saying 10mm throws on elevators and 8 mm on elavons or the other way around? Yours looks to be flying pretty good just wondering how much throws you have in Manuel? Thanks for reviews

[@AdamGdoesFPV]

Hi thanks for watching and for feedback. I no longer have this model so cannot help there sorry

[@pukki34]

Nice review, the kit looks like good quality

[@AdamGdoesFPV]

Thanks :) Yeah it's a great bit of kit and fun to fly!

[@sportducati29]

Really a nice and honest review :]

[@AdamGdoesFPV]

Thanks! Glad you liked it :) Cheers

[@gazzabyerun9556]

Wow, great review! Thanks!

[@AdamGdoesFPV]

Thanks for watching!

[@davidunderwood1907]

Dont stop

[@grim-upnorth]

Believing... Hold on to that feeeeling!

[@AdamGdoesFPV]

haha :D

[@trumblez]

I have this plane as my first fpv fpv plane (i have been flying rc planes for the last 5 years so im not new to planes) . My problem is that im really bad at launching planes so I had several really bad crashes because of bad launches. But when a friend of mine launched it it always flew really well exept for when horizon drift and me accidentally going into horizon mode made me crash because when I pulled up copletely i was still going down. I am really not sure if i should even get spare parts for this one ( at this point i would have to get every part new (fuselage, wing and tail)). Do you know a plane that is easier to launch an where i can get more range (i got 35km total distance with the talon) out of it? ( i have 2 4s 5000mah batteries that I could wire in parallel and use for bigger planes) It would also be great of it would fly great with these 2 lipos i have, they weigh about 350g each.

[@AdamGdoesFPV]

Hi, planes that are easier to launch are ones like the Albabird and Swordfish, the twin tractor config. Not sure on range but I think at least the Albabird would be able to beat 35km. I've got videos on both so maybe just check them out and see what you think 😃

[@HelloNotMe9999]

Someday I'm gonna take one if these and make it out of fiberglass and a bit of carbon fiber...

[@AdamGdoesFPV]

Sounds like a fun project😎

[@EnglishTurbines]

Launching on a no wind day, "Exciting" is the most polite way of putting it. Try a lighter, smaller Lipo.

[@AdamGdoesFPV]

Ha, yeah its fun. In zero wind the Dart is still 10x easier to launch, it's incredible. I'm actually thinking about chucking a bigger Lipo in, with 3,100 4S as far forward as possible it just hits CG. will struggle with anything smaller. Thanks for watching ET :)

[@flighttherapybullisticfpv133]

Great video m8! Little confused by your choice of fpv camera though... something like the predator v3 is on sale right now and its image is the closest to an Hd image ive ever gotten from a camera.. including the ratel and eagle.. ive noticed a HUGE difference with it on my 7" quad vs the old sparrow that was on there. Better picture makes for a much more enjoyable flight especially when cruising

[@EnglishTurbines]

To be fair, the Runcam Sparrow is the very worst FPV camera Runcam have made, and Im a Runcam fan. It's absolutely shocking.

[@AdamGdoesFPV]

The 2 camera's I run are the Runcam Eagle 2 and the Foxeer I have on this. For the money I think this is an excellent clear camera, and for double the price I don't think there's a huge amount of difference in the RCE2. Maybe the recording in this video doesn't do it justice? I have like 10 of them and always liked it. Next time I'll try something new if you think its worth it :) thanks for watching and commenting

[@grim-upnorth]

​@@EnglishTurbines 1 million percent agree with you ET. I have the sparrow in my Ranger EX at the moment, only because the Foxeer HS1177 V2 hadn't arrived yet. Sparrow is absolute dog-poop, I have no idea why they even make it.

[@IanF-FPV]

Hey if this plane is good enough for Trappy from TBS then it's good enough for me...lol

[@AdamGdoesFPV]

Haha fair enough😂 it is a decent plane though!

[@robertpawlusiak]

The back end mount on Sonicmodell AR Pro 1000 mm has same rear motor mount issue I have one I know these companies need to address with foldings props standard equipment problem solved !

[@AdamGdoesFPV]

I think they just needed to stick a bit of glue on it to be honest😆 I'm not really a fan of folding props and they will never supply them as standard as they increase complexity and cost of the plane. Best thing is to set your ESC brake on, this way there's a much lower chance of breaking a prop on landing. Hope this helps.

[@nolsaepark1]

Thx share😘

[@AdamGdoesFPV]

You're welcome, thanks for watching :)

[@JD_1]

Great Honest Review. So I take it that you did not get one with the defective motor from factory?? And how are the tail fins holding up for you?

[@AdamGdoesFPV]

Well I'm just reading this now, after I posted an update earlier. Unfortunately I have been supplied with one of the defective motors as I found out this morning. I've contacted ZOHD and will provide a video update on this once they reply. For now I've stuck a spare Sunnysky on it. The fins: I'm very surprised that so far after near 10 flights, a couple of failed launches, a crash and a couple of rough landings, the fins are still perfectly intact! Luck?? maybe. Or maybe I miss-judged them. I'll let you know if I manage to break them. The spare being included in the kit was making me suspicious :P Cheers JD

[@JD_1]

@@AdamGdoesFPV some of your failed launches could have been because of the motor. Very Sad. I still want to buy this plane. But to buy it at the current cost. Then having to take off the motor and put on a new motor is just not right. And I actually seen a couple guys say that the replacement motor ZOHD sends to replace had to be sent back cause it has the same QC troubles. I will just wait for the kit. Thanks for sharing and being Honest!

[@AdamGdoesFPV]

Hi JD. I'm awaiting the replacement motor and will inspect it and test it asap. I'll do a follow up video with the results. They have assured me the issue is not present in the motors they ship now but I will find out for myself and share the results. Cheers :)

[@AdamGdoesFPV]

Hey JD. The new version of the motor is on and flying well. The interesting thing about the new motor is it is marked as version 2 and is a branded Sunnysky motor. Also still has the ZOHD branding on it.

[@ronalditoization]

so cool

[@AdamGdoesFPV]

Thanks Alexis :D

[@williambolanos8532]

Hello Adam. With that vtx and vrx, what distance do you get?

[@AdamGdoesFPV]

I have this VTx on many planes. I don't really do long range much any more but I have been 17km with these, and I turned back because of battery, picture was still fine.

[@bigphil6980]

Hi Adam I am new to the hobby and have my first aircraft a Mini skyhunter and the ZOHD kopilot light and was wondering can you point me to where I can see some set up vids aimed at the person that knows nothing yet about how to set up his craft in easy terms as all the ones I have seen just left me more confused than before plus where do to get the long range Antenor from is it ready made or made from different gear put together yourself , plus suggestions from where to get it would be nice keep up the good work thanks

[@AdamGdoesFPV]

Hi Phil, not sure about the Kopilot, i expect there should be some good setup videos on YT by now, not looked myself. Also use RCgroups or Facebook groups to ask for help, many people will be willing to assist. My long range video antenna is the pepperbox which you can buy here: tiny.cc/6adv0y I've done a full 'how to' video on my groundstation which is aimed at beginners: kzbin.info/www/bejne/nX-7lqatgM-go7M hope this helps. Cheers

[@OZSCQUADS]

noice. what propeller are you using?

[@AdamGdoesFPV]

Haven't owned this for a while. Starte on prop that came with it and then I think I used an 8x6 APC

[@jexpo7019]

Should get many more views

[@AdamGdoesFPV]

Thanks :)

[@egtreadway4232]

Another great video thanks, i see your using the true rc antenna on your 1.3ghz vtx I'm torn between this and the vas bluebeam cloverleaf, whats your thoughts on the two? I'm in process of converting my zoid dart xl enhanced over from 5.8ghz to 1.3ghz and I'm completely new to 1.3ghz and alittle concerned about the inav osd information I'm thinking that information comes from vtx but really don't know. Thanks again

[@AdamGdoesFPV]

TrueRC make great antennas but the main thing is they’re really durable compared to the ones made of wire. Data comes from the FC not the vtx so you don’t need to do anything just swap out vtx and antenna and you’re done

[@egtreadway4232]

Ok good information thanks

[@egtreadway4232]

Ok good information thanks

[@holaperrito2554]

Where is the INav build video for this plane you mentioned in your video?

[@AdamGdoesFPV]

Here: Matek F722 Fixed Wing Flight Controller - Review - Wiring - Installation kzbin.info/www/bejne/nZzQfHZ8i6x1ra8

[@grim-upnorth]

Some other people have reported issues with their motor from this model. After flying it for a while after making this video, how is your motor getting along?

[@AdamGdoesFPV]

Yeah I've posted an update here this morning :/ my motor did exactly same as others and I've messaged ZOHD. Once they reply I'll post a video update.

[@heyjackfpv5469]

great video , whats the best way to launch it in manual mode ?

[@AdamGdoesFPV]

In manual mode there is no special method that is different to any other plane. I used Autolaunch many times on this and it always went out perfectly :) Check out my autolaunch tutorial video

[@kabturek]

Isn't the Dart XL box smaller for transport ? Apart from the FC blocking the bolts for the wings - are there any other advantages regarding transport of the airframe ? I'm asking about "long range transport" on a plane etc

[@AdamGdoesFPV]

The box for the Dart is a different shape, its probably bigger than the Talon GT box overall. I don't have the Dart box anymore unfortunately so I can't give you a side by side comparison. Other than that, no other major difference when disassembling them. Dart has 2 vertical stabilisers to remove. Talon just has the one tail section to remove.

[@davidwatkin1484]

8.50 The slots for servo cables are meant for flat, not twisted.

[@AdamGdoesFPV]

Even at that you'd have to really squash them in. Thought it worth mentioning as most people seem to use the twisted these days. Cheers

[@DownhillAllTheWay]

At 10:10 and 10:20 and 10:30, you cork-screwed on launch, crashing on the second attempt. Was that a fault of the plane? Is it difficult to hand-launch?

[@AdamGdoesFPV]

No It's not really difficult to hand launch. My left wing is heavier with the vtx and the torque roll makes it wan't to roll left too... This is a bad representation of the launches with this plane, I have flown it around 20 times and there were the few bad ones.

[@avsaase]

With this setup, are the wing of equal weight? My 5.8GHz is 12g grams heavier than the R9MM receiver and I wonder if that causes the pitch induced roll on my GT. I also had it spiral into the ground in a sharp turn once. Thanks! Nice flying site btw.

[@AdamGdoesFPV]

Thanks :) I'm not too sure if the wing weight would have caused this, I think it's just a characteristic of the TGT if you fly a bit slower than it likes in a shaper than normal turn.

[@avsaase]

@@AdamGdoesFPV I think i will try mounting the VTx on the nose and see if the pitch induced roll goes away. Only other cause I can think of is the ruddervators having uneven throws. Either way, definitely important to keep the speed up with this plane.

[@Powershotknecht]

cool

[@AdamGdoesFPV]

Thanks :D

[@DuckyRC]

If you wouldn't mind posting your inav dump? I'm having all sorts of stability issues with this craft and I suspect PIDs to be the issue.

[@AdamGdoesFPV]

Hi, I can provide that for you some time soon, but have you tried Autotune? I mostly fly in manual so have done a lot of fine tuning on stabilised modes. Cheers

[@DuckyRC]

@@AdamGdoesFPV I tried autotune, I think it may be a physical issue with the craft at this point.

[@AdamGdoesFPV]

@@DuckyRC What is the issue you're having? What FC?

[@DuckyRC]

@@AdamGdoesFPV extreme side to side wobble, most noticeable in turns/ banks

[@DuckyRC]

Roll axis it seems

[@tracibeacer670]

Do you have anything to add 10 months on ? Cheers.

[@AdamGdoesFPV]

Not really, still a great plane. Make sure you watch my other video regarding the motor update though! Cheers

[@PrInCeUKER]

what or how do you mount your vtx?

[@AdamGdoesFPV]

Best view of it is at 9:08. All i did was cut the bay a bit bigger, to the same size as the vtx and then it's only held in by a piece of clear packing tape. This is how I've done it for years on all of my models, it's never come loose or got too hot using this method. Cheers

[@DudesatRC]

I have a question, i looking for a long range plane, how do you compare this with the One i find the parrot disco?

[@AdamGdoesFPV]

The Parrot Disco is a pre built RTF aircraft that I have no experience with. You will have a lot more freedom to build something to the spec you require if you get the Talon GT. I'm sure the Parrot Disco will only be short range, as long range is more specialist. Cheers

[@DudesatRC]

Ok Thank you for the answer, But If you mod it to a 4g lte it Will fly long range.

[@DudesatRC]

How long can you fly with Your equipment?

[@aidanmcgee5900]

Hi Adam, how do you find the TrueRC antenna out on the wing? Does it make it lean to one Side? Cheers

[@AdamGdoesFPV]

Hey, It didn't seem to have an impact on flight performance but it isn't the most aerodynamic antenna for a plane of this size, i just used it as I had one unused. Maybe a normal skew would catch the wind less. In terms of video performance they work great though. Cheers

[@aidanmcgee5900]

Adam G does FPV , thanks Adam for reply- always appreciated. I bought 2 from RMRC today so looking forward to trying them out on the talon GT. Been using stock up until now with varied results... hoping wind dies down a bit to get out more! Cheers again

[@AdamGdoesFPV]

@@aidanmcgee5900 No worries :) I might try a range test on these antennas soon and unplug my Pepperbox. Been getting excellent results with one of these in my ZCon anyway. Cheers

[@aidanmcgee5900]

@@AdamGdoesFPV Would love to know the outcome of this test. Was very tempted to get VAS Pepperbox when ordering through RMRC - but already spent a small fortune on RC gear lately. Where do you get your Lipos? (Hobbyking want £15 p&p!!) Banggood dont send Lipos to Uk (but weirdly will send to IRL?). Im in N.Irealnd so doesnt suit... cheers!

[@AdamGdoesFPV]

The Pepperbox is excellent, I highly recommend it when you’ve reached the stage where you want to go further than the reach of the omni’s. I get 95% of my Lipos from Hobbyking, and I find that if you buy from the EU warehouse shipping is reasonable. Surprisingly the UK warehouse tends to have more expensive shipping for some reason. I do get a very small amount of lipos from Banggood, bit weird they will ship to Ireland and not UK, they have some odd rules with shipping sometimes. Anyway, check out HK EU warehouse, see if that’s better 👍🏻

[@alanjenkin1202]

Do you prefer this to the dart?

[@AdamGdoesFPV]

I do prefer this to the Dart as it feels more stable and hasn't got that annoying nose up on full throttle. Also think the overall design is a little better thought out. Hope this helps. Cheers Alan

[@km4lkx497]

It looks like you are throwing the plane during launch. It will launch better if you bring it to full throttle and just give it a gentle push into the sky.

[@AdamGdoesFPV]

Tried that first time, it ended up on the floor. I actually use autolaunch now and its nice an easy

[@k1ortia]

How mad is this. Haven't bothered with banggood for almost a year as its gone right down hill. Last night i thought id have a look what was available on the United Kingdom location. half way down the page The Zohd Talon GT was there for only £100, yes that's right £100. and only two left, so i bought them both. I didn't even want one to be honest, but i know they were something like £230 and had pretty good reviews so thought why not. I can honestly say i was lucky as hell with that find.

[@AdamGdoesFPV]

That's a very good deal for this plane! Especially as it's in a more local warehouse! Enjoy mate

[@k1ortia]

@@AdamGdoesFPV I know. i couldn't leave it there for that price mate. Cant wait to get it in the air.