Cool Add-ons for Blender: Human Generator: bit.ly/3rBjJXy Massive Cars And Vehicles Add-On: bit.ly/3cuWF8N 1100 Textures in Blender: bit.ly/2QEJ7yN Flip Fluids Simulation Addon: bit.ly/2Pbu5QR HDRI Maker Addon: bit.ly/3stHdPR Using these links help fund all the free tutorials.
@isaiah26716 жыл бұрын
Made a new blender channel. You are a great inspiration
@Arnaud___3 жыл бұрын
Hey, any chance you can make this exact same tutorial for 2.92 ? Can't get this to work and it's pretty frustrating :(
@eflatun58962 жыл бұрын
A m a z i n g! Thank you very much for simple explanation... :)
@dimazstudio4 жыл бұрын
you save my day
@Kimera_Alternate_Realities6 жыл бұрын
OMG that is one beautiful red liquid animation.
@rlrtmarketing69764 жыл бұрын
make this video in the blender 2.82 version sir.....there are lot of differences between the version
@mancino146 жыл бұрын
....Bravo Olav!....very useful!...
@3dprintwiz3786 жыл бұрын
Is this accurate enough for engineering application. Like will it predict flow inside network of pipes with reasonable accuracy?
@MichelPWeber6 жыл бұрын
Nice tutorial. Thank you.
@ธีรวัฒน์ช่อสุวรรณ4 жыл бұрын
Thank you for tutorial.
@ajal54096 жыл бұрын
You can only increase the depth of the curve and the resolution and it will be the same as you make a circle and make the bevel of the curve to it
@semillerimages6 жыл бұрын
One little thing... it has to be a bezier circle, not a regular circle for the bevel to work
@Olav3D6 жыл бұрын
That`s right
@burgir99854 жыл бұрын
yeh i got confused then figured it out
@ShanKochiArtist4 жыл бұрын
awesome thank you
@antoniobarone146 жыл бұрын
senpre n.1 il massimo Grande
@BlenderRookie6 жыл бұрын
Very nice. I have a request. Will you make a tutorial explaining how to add particles to a fluid simulation? I have seen a few tutorials where add particles is part of it but they glossed over it so fast I couldn't tell what they did or why they did what they did. Keep in mind I understand most everything about the fluid domain but not about adding particles. Or if you know of or already have a tutorial, please let me know.
@anshg39064 жыл бұрын
thanks...i got the same result..:)
@semillerimages6 жыл бұрын
awesome!!!
@genchasaj36932 жыл бұрын
Hello Olav3D. I use a 2.79 version and I've tried to make this fluid tutorial. Everything went well except two things: why does fluid gets like not entirely inside the tube but I see spots and patches even though I did the smooth modifier and subsurf. And second, when completely rendered the view it starts again from the beginning.
@sanithmc96386 жыл бұрын
Nice
@ranhat22 жыл бұрын
Repeating this lesson--at 0.5 speed!--optimism rises despite rapidity (one cursor move with explanation was only 0.25 seconds at 0.5 playing speed). Could it be that if one masters this lesson, much of all else in Blender might be collateral.
@GHOST_001_Bravo5 жыл бұрын
Can u pls tell me the circle option is not coming it's showing blank ....
@andreimihai68476 жыл бұрын
I tried to do a more complex one but the fluid kepps comming out from everywhere like its ignoring the tube pls help
@Olav3D6 жыл бұрын
Yes, more complex projects can be difficult for the fluid physics in Blender to handle sometimes, but it usually works.
@ianmimnall8286 жыл бұрын
My fluid isn't even going inside the tube, when I go to bake, the fluid is flowing outside the tube, and after a few frames, it just disappears altogether. please help
@Olav3D6 жыл бұрын
Blender discord chat: discord.gg/XzyGbVn
@ianmimnall8286 жыл бұрын
my fluid isn't inside the tube when I bake the simulation, the inflow is going sideways on the x axis, and not down into the tube. please help
@Olav3D6 жыл бұрын
Try increasing the resolution of the simulation. If that does not work I would start over, this tutorial still works. Hope that helps :)
@neo71086 жыл бұрын
Is this what would happen with real fluid in curved tube ?
@AllanPatrick76 жыл бұрын
Not really. Most simulation softwares consider just the fluid, not the air. In real life the air would be trapped inside the first curve.
@chris-rh1sm5 жыл бұрын
pc specs ?
@sanithmc96386 жыл бұрын
What is your specs
@Olav3D6 жыл бұрын
GTX970
@sanithmc96386 жыл бұрын
Olav3D Tutorials I am using dual core processor with 1gb ram And worst Intel g31 graphic card
@xanman63345 жыл бұрын
my waters not moving
@perkaholicgobblegum91705 жыл бұрын
the fluid simulation is too slow and takes 1000 frames to get to the end of the tube