2 Easy Method to Clean Iron Bottom Plate With Salt and Toothpaste | House keeper

[@aashooramalik9821]

Who believes on comment more than video 😅😅

[@Hi-_-Anna8]

What worked for me.. Applied some toothpaste on my iron plate, sprinkle salt over it. Turned the iron to max for few seconds. Then scrubbed it with sponge soaked in vinegar and water. It took 5-10 mins to get rid of all the rust. To clean steam holes, I added water with small amount of vinegar in water reservoir and then steamed the whole water. Tried and tested! ✔️

[@naturalsoundsonly]

the first one method works but after you apply toothpaste and baking soda, we need to turn on the iron for a while, then the rub it with clean cloth affer turning off the iron. Make sure the iron is cooling slowly and you can rub once its temperature is moderate.

[@hasnanizam2378]

Thankyou soo much. The paracetamol hack really works nd i got my iron clean❤️

[@HuaYue10]

#1 is too messy and in my unit, the mixture will get jammed in the tiny holes for steaming. So I went for #2 & am happy w/ the results. 😊👌

[@housekeeperdiy]

Thanks for sharing!

[@drmontague6475]

Prevention is better than cure. I have found that most people iron at too high a temperature . The steam setting on my iron has high, medium , low. Set the steam to low. I have found this setting works perfectly and I never have to clean my iron. The rule is start off at a low temperature and increase the temperature gradually. Write the settings down or keep them in a mental sock. Give it a go you have nothing to lose and hopefully everything to gain.

[@bekosso]

I would not dream of using abrasive on an iron.

[@aslamomr6691]

تاصساسلصثث٣

[@roomdecorideas1206]

Thanks will let u know if it works!!

[@GulzarAhmad-nn1dz]

Does it makes clothes dirty? Or destroys clothes? 😅

[@GulzarAhmad-nn1dz]

Pls tell me

[@drmontague6475]

..Prevention is better than cure. I have found that most people iron at too high a temperature . The steam setting on my iron has high, medium , low. Set the steam to low. I have found this setting works perfectly and I never have to clean my iron. The rule is start off at a low temperature and increase the temperature gradually. Write the settings down or keep them in a mental sock. Give it a go you have nothing to lose and hopefully everything to gain.

[@waheedshahani]

Wait!!! Didn't you clean the plate in first method? How come you got exact same burn again before trying 2nd method?

[@KhanZadiKhan-m8d]

I thought the same

[@tariqsaeed9013]

Sirf daant he saaf ni hoty Colgate sai baqi SB kuch ho jata hai😂

[@Noxboxz]

Right😉

[@chathurakalehewatta1427]

This techniques is realy work . Thank you . This video is realy helpefull to me .👍

[@drmontague6475]

Prevention is better than cure. I have found that most people iron at too high a temperature . The steam setting on my iron has high, medium , low. Set the steam to low. I have found this setting works perfectly and I never have to clean my iron. The rule is start off at a low temperature and increase the temperature gradually. Write the settings down or keep them in a mental sock. Give it a go you have nothing to lose and hopefully everything to gain.

[@mdsuhail21]

I am not sure about other methods but paracetamol worked well , remember to wear a mask or just cover your face .

[@drmontague6475]

Prevention is better than cure. I have found that most people iron at too high a temperature . The steam setting on my iron has high, medium , low. Set the steam to low. I have found this setting works perfectly and I never have to clean my iron. The rule is start off at a low temperature and increase the temperature gradually. Write the settings down or keep them in a mental sock. Give it a go you have nothing to lose and hopefully everything to gain.

[@tusharsaini7055]

#1 the trick is really working..but takes some time...

[@drmontague6475]

..Prevention is better than cure. I have found that most people iron at too high a temperature . The steam setting on my iron has high, medium , low. Set the steam to low. I have found this setting works perfectly and I never have to clean my iron. The rule is start off at a low temperature and increase the temperature gradually. Write the settings down or keep them in a mental sock. Give it a go you have nothing to lose and hopefully everything to gain.

[@trailblazer1614]

It works but quantity of both has to be very less and add few drops of water too and then scrub with a brush for perfect results

[@juwairiyaabdulqadeer3549]

Indeed a small quantity was sufficient to remove it all. Thanks for sharing your experience.

[@drmontague6475]

Prevention is better than cure. I have found that most people iron at too high a temperature . The steam setting on my iron has high, medium , low. Set the steam to low. I have found this setting works perfectly and I never have to clean my iron. The rule is start off at a low temperature and increase the temperature gradually. Write the settings down or keep them in a mental sock. Give it a go you have nothing to lose and hopefully everything to gain.

[@amritaneupane9529]

What can we used instead of baking soda

[@sridevigajjela2515]

Thanks for the trick ,it worked but not as easy as it is shown. Took lot of effort.

[@RameshT999]

Which method worked?

[@drmontague6475]

..Prevention is better than cure. I have found that most people iron at too high a temperature . The steam setting on my iron has high, medium , low. Set the steam to low. I have found this setting works perfectly and I never have to clean my iron. The rule is start off at a low temperature and increase the temperature gradually. Write the settings down or keep them in a mental sock. Give it a go you have nothing to lose and hopefully everything to gain.

[@crystaldani4063]

Where did u use salt in this video😒

[@rushan2512]

Appke toothpaste mai namak nahi hai 😂?

[@سلطان-ذ4ف2ي]

افضل طريقه انك تشغل المكواة لما تسخن وتأخذ حبة بنادول وتضعها في منديل وتمسح فيها المكواة وراح تشوف النظافه بإذن الله

[@thomasfed1]

Why u make fake videos. Does not work

[@amarahijazi7022]

Can I use any other toothpaste??

[@housekeeperdiy]

Yes

[@AlmaHRManager]

Ayurveda is good

[@mahaakhtar3446]

Hey thanks for sharing. I wouldn't recommend scrubbing because scratches can snag on some fabrics like chiffon/georgette. Toothpaste and soda worked. I turned on the heat for 30 seconds and i saw that it was getting dry so I sprayed a little water. when it cooled a little I tried cleaning with tissue but saw no results yet. I got a bit of cardboard and tried scratching at the edge and VOILA! the whole layer peeled off like dry crisp paper! revealing smooth shiny iron underneath. No scrubbing required at all. I cleaned with a moist cloth afterwards. Note: Mine was not a steam iron (not a fan of those) and had no holes. The burn was bad it had a nylon-y carpet burn on it all over the surface. Was in very bad condition. One other time I took it to a bike mechanic where they buff tyre rims and they buffed my iron smooth and I could see my reflection on it afterwards :D

[@shivaniyadav6020]

Thank you soo much ...

[@blossom1643]

Hey thanks for the tip! (I’m not a fan of holes either) mine is old fashioned one & I find most people don’t have these days. I’m gonna try your tip !✌️

[@waseemakram8497]

2nd method is not good because there will be scratch after rubbing so resistance will be higher while pressing clothes

[@happyLways]

True

[@drmontague6475]

Prevention is better than cure. I have found that most people iron at too high a temperature . The steam setting on my iron has high, medium , low. Set the steam to low. I have found this setting works perfectly and I never have to clean my iron. The rule is start off at a low temperature and increase the temperature gradually. Write the settings down or keep them in a mental sock. Give it a go you have nothing to lose and hopefully everything to gain.

[@SalvationTotime]

How do I make the rough surface become smooth?

[@numariqnazir550]

It works!!!!

[@housekeeperdiy]

thanks

[@Isaac1987]

Like @Soniaakter said use a paracetamol/Tylenol tablet. Put the iron on max heat and then hold the tablet with a tweezer and remove dirt off the plate. Use tissue triple folded to remove excess. Stay safe everyone and god bless 🙏🏻❤️😇

[@jugjoo5713]

Does aspirin or eno work

[@drmontague6475]

Prevention is better than cure. I have found that most people iron at too high a temperature . The steam setting on my iron has high, medium , low. Set the steam to low. I have found this setting works perfectly and I never have to clean my iron. The rule is start off at a low temperature and increase the temperature gradually. Write the settings down or keep them in a mental sock. Give it a go you have nothing to lose and hopefully everything to gain.

[@marite135]

Just finished cleaning my iron with paracetamol it works wonders, but make sure you don’t inhale the fumes coming from it it feels very toxic. I coughed and coughed and felt my throat extremely dry. Thank you for the video though

[@kussamballamahajan228]

I just want to know if only colgate has to be used ir any other tooth paste can work as well.

[@drmontague6475]

Prevention is better than cure. I have found that most people iron at too high a temperature . The steam setting on my iron has high, medium , low. Set the steam to low. I have found this setting works perfectly and I never have to clean my iron. The rule is start off at a low temperature and increase the temperature gradually. Write the settings down or keep them in a mental sock. Give it a go you have nothing to lose and hopefully everything to gain.

[@DrMontague]

Warm iron, spray plate with oven cleaner, leave on for 20 minutes, wipe off with cloth.

[@asifhussain-du8yg]

Alternatively you can use the blade rash it again and again same like zink remover to remove the burnt sign

[@satyas8]

nice its worked

[@housekeeperdiy]

Enjoy

[@sj9404]

I tried #2 method that worked Thanks

[@housekeeperdiy]

You're welcome!

[@vinodkumarchouhan2592]

Tried 2nd method, it cleaned the iron , BUT, it got scratches on that part, now during ironing it doesn't slide smooth on clothes, 2nd method not recommended. There is a reason the company polishes the sole plate. Here the video maker is only concerned about cleaning the plate and not about what it will result in using the iron. Now I am going to change my plate or buy a new iron.

[@ultraali453]

You may be able to get it polished by someone who polishes marble.

[@varunrode1223]

Thanks for the knowledge

[@rupatalukdar4386]

Can I use DABUR RED PASTE instead of COLGATE?

[@advaithravivarman248]

☠️☠️

[@osumiosumi3624]

👍👍👍

[@peerzadaishfaq4120]

I tried IST trick and it works thank you

[@drmontague6475]

Prevention is better than cure. I have found that most people iron at too high a temperature . The steam setting on my iron has high, medium , low. Set the steam to low. I have found this setting works perfectly and I never have to clean my iron. The rule is start off at a low temperature and increase the temperature gradually. Write the settings down or keep them in a mental sock. Give it a go you have nothing to lose and hopefully everything to gain.

[@oliviaghosh2295]

This is fake It did not work actually

[@sairashah7056]

1st method ubi many try nai kya lekin 2nd method kam kerta ha. Mai aksar kerti rrhti hu.

[@maryroseespinosa5258]

It works for me. Thanks for sharing

[@housekeeperdiy]

You're welcome!

[@drmontague6475]

Prevention is better than cure. I have found that most people iron at too high a temperature . The steam setting on my iron has high, medium , low. Set the steam to low. I have found this setting works perfectly and I never have to clean my iron. The rule is start off at a low temperature and increase the temperature gradually. Write the settings down or keep them in a mental sock. Give it a go you have nothing to lose and hopefully everything to gain.

[@najeeb519]

You know I dance 🤣 your music 💃💃💃

[@pahadigamer5424]

Nice idea for clean iron☺👌

[@drmontague6475]

..Prevention is better than cure. I have found that most people iron at too high a temperature . The steam setting on my iron has high, medium , low. Set the steam to low. I have found this setting works perfectly and I never have to clean my iron. The rule is start off at a low temperature and increase the temperature gradually. Write the settings down or keep them in a mental sock. Give it a go you have nothing to lose and hopefully everything to gain.

[@soniaakter5508]

Just use a paracetamol tablet, heat your iron and just rub it..and clean it then see the magic.. ❤️

[@divyamsrivastava8050]

It dnt work at all

[@issongtv8477]

Yes it works but the first coating remove

[@sharukamboj514]

Bro it worked

[@lathamohan8779]

Yes it works. Thank you

[@englishwithzamee4460]

Omg do not try the 2nd hack because it will definitely damage your iron 😯

[@drmontague6475]

Prevention is better than cure. I have found that most people iron at too high a temperature . The steam setting on my iron has high, medium , low. Set the steam to low. I have found this setting works perfectly and I never have to clean my iron. The rule is start off at a low temperature and increase the temperature gradually. Write the settings down or keep them in a mental sock. Give it a go you have nothing to lose and hopefully everything to gain.

[@drmontague6475]

@Anvi I take it that you have learning difficulties?

[@drmontague6475]

@Anvi A Joke? So what are we supposed to laugh at? Mine are better.'You are about as funny as a dose of clap'! Nerd :)

[@nidhiarora1454]

It worked with toothpaste and salt... But instead of issue ..I used scrubber....so combination of both the methods...

[@drmontague6475]

Prevention is better than cure. I have found that most people iron at too high a temperature . The steam setting on my iron has high, medium , low. Set the steam to low. I have found this setting works perfectly and I never have to clean my iron. The rule is start off at a low temperature and increase the temperature gradually. Write the settings down or keep them in a mental sock. Give it a go you have nothing to lose and hopefully everything to gain.

[@saritaranipatil605]

can i use any other toothpaste

[@monikaknojia6390]

Yes but only white n plane toothpaste

[@Gurpreetsinghpreet1]

H3 must have got beaten after using that paper scratching a nice iron surface 😂😂

[@Oneandonlyamirali]

My electrician takes hefty amount of money for cleaning up the iron, but I’ve always wondered where all the scratches are coming from??? 🤔🤔🤔🤔 now I know how to scratch my own iron for less money 😂😂😂

[@tayyabasiraj1743]

My sister make this bhund...its very useful...meri pen buddi hogaye hai us ki pen ki siri

[@arrivagabry]

yeah because salt scratches, it practically scratches away the dirt or glue, and also ruins your iron, I used WD40 by accident I ironed the adhesive fleece on the wrong side, my iron was full of burnt glue, came off without scratching and nothing abrasive, with WD40

[@nurumohamed5663]

Use dustless white chalk, its so effective and no need of wearing a mask Thank me later

[@marriamjadrankhan483]

You have done the second method first then the first method after on the same iron. Because scratches are visible.

[@noraejiana7211]

Worked for me. Thanks for sharing🤗

[@drmontague6475]

..Prevention is better than cure. I have found that most people iron at too high a temperature . The steam setting on my iron has high, medium , low. Set the steam to low. I have found this setting works perfectly and I never have to clean my iron. The rule is start off at a low temperature and increase the temperature gradually. Write the settings down or keep them in a mental sock. Give it a go you have nothing to lose and hopefully everything to gain.

[@bhomeshsahu6419]

Colgate ke baad kon sa atta dalna hai

[@drmontague6475]

..Prevention is better than cure. I have found that most people iron at too high a temperature . The steam setting on my iron has high, medium , low. Set the steam to low. I have found this setting works perfectly and I never have to clean my iron. The rule is start off at a low temperature and increase the temperature gradually. Write the settings down or keep them in a mental sock. Give it a go you have nothing to lose and hopefully everything to gain.

[@reynorramos1994]

In your caption u said SALT but in d video u sprinkled BAKING SODA? Clarify please. thank you

[@bupelushibashi9726]

What's the name of the song?

[@alvarezeri1]

Nunca había visto una plancha sin hoyos 🤨🧐🤔▪️▪️▪️▪️▪️▪️▪️▪️▪️▪️▪️▪️▪️▪️▪️▪️▪️▪️▪️▪️▪️▪️▪️▪️▪️▪️▪️▪️▪️▪️▪️▪️▪️▪️▪️▪️▪️▪️▪️▪️▪️▪️▪️▪️▪️▪️▪️▪️

[@DanishArshad3912]

JazkAllah it's working ❤

[@Amaryllis88164]

It didn’t work for me😞

[@kamrankhanutmankhail1709]

This is fake, i just wasted my toothpaste and salt. It doesn't work.

[@paliroofing5997]

It is not , baking soda.. See vedio again

[@laurabarnes3295]

@@paliroofing5997is baking soda in d video 😅

[@chintu4825]

Just apply tooth paste and heat sometimes and remove that it clean

[@vandanachhatpar3667]

Yr iron does not have holes. Mine has and soda will go inside

[@jackiecanuck]

Likely easier because the soleplate does not have steam holes to contend with.

[@drmontague6475]

...Prevention is better than cure. I have found that most people iron at too high a temperature . The steam setting on my iron has high, medium , low. Set the steam to low. I have found this setting works perfectly and I never have to clean my iron. The rule is start off at a low temperature and increase the temperature gradually. Write the settings down or keep them in a mental sock. Give it a go you have nothing to lose and hopefully everything to gain.

[@gututujaiswal8135]

First wear a mask .Heat the iron thn unplug it and put disprin or peracetamol tablet n rub it with the help of stick or any holder coz the iron plate is hot... Clean it with the rough cloth carefully ..while doing this take care of ur hands so that tablet particles n rust don't stick with ur skin..thn heat it n do the same process till result .. plz don't forget to wear a mask becoz it's a very strong smell😑..

[@walikhan3367]

Nice pos

[@samarali-kt8lh]

guys kis kisne ye trick try ki hai please reply zarur kare or result kesa hai please reply

[@EyeOpenerWoW]

Awesome

[@drmontague6475]

..Prevention is better than cure. I have found that most people iron at too high a temperature . The steam setting on my iron has high, medium , low. Set the steam to low. I have found this setting works perfectly and I never have to clean my iron. The rule is start off at a low temperature and increase the temperature gradually. Write the settings down or keep them in a mental sock. Give it a go you have nothing to lose and hopefully everything to gain.

[@TolqinSafarov-uj5me]

👌👍👍👍👍👍

[@busymomcraft]

It doesn't work I tried it . I tried it again and this time after applying toothpaste I switch on the iron and when it becomes hot then I clean it with cloth it works but you have to rub hard it's not that easy as showing in video .and it also work with toothpaste only

[@nayabarshad6995]

This way is not real my iron becomes useless

[@lhynnevillanueva4117]

Thank you🤗

[@housekeeperdiy]

You’re welcome 😊

[@drmontague6475]

..Prevention is better than cure. I have found that most people iron at too high a temperature . The steam setting on my iron has high, medium , low. Set the steam to low. I have found this setting works perfectly and I never have to clean my iron. The rule is start off at a low temperature and increase the temperature gradually. Write the settings down or keep them in a mental sock. Give it a go you have nothing to lose and hopefully everything to gain.

[@mastermehndi4452]

Iron box stain you had is you drew by something.

[@alwayskeepsmiling6597]

Isse press ka colour to nahi uatrega

[@alwayskeepsmiling6597]

Colgate apply karne se pahle press ko garam karna padega

[@priscajacinta5512]

Oh oh oh! Why can't somebody just try with stealwire this is common sense, yey..... Why not

[@drmontague6475]

..Prevention is better than cure. I have found that most people iron at too high a temperature . The steam setting on my iron has high, medium , low. Set the steam to low. I have found this setting works perfectly and I never have to clean my iron. The rule is start off at a low temperature and increase the temperature gradually. Write the settings down or keep them in a mental sock. Give it a go you have nothing to lose and hopefully everything to gain.

[@zarintasnimupoma3543]

Thank you

[@AyushVerma-bi1me]

Yes merx tidhs bhaut saf hus hsi purs ni hau😂😂😂

[@hugomarcelorodriguez2664]

Si pero mi plancha es de vapor igual tiene agujeros donde sale el vapor como se hace????

[@BlessedMe-s2l]

Regmal se nhi krni cahey iron saff

[@vijayasukhadeve729]

Itsss a FAQ

[@Varmadheeraj6]

You can clean with blade don't need to waste toothpaste 😁😁😁😁😁😁😁😁

[@krishikakaushal9843]

this hack if fake they r onli wasting the items n time 100 percent fake

[@pankajparmar6070]

So...😁..gud...maim...👍👍

[@reversetranscriptase126]

Then why the hell on Earth are you watching this babe?🙄

[@faizaiqbal925]

I have to check baking soda and salt are same 🤭(look at the caption)

[@kevinpyne5808]

This method didn't work for me. Regular sandpaper cleaned it up.

[@prachiwazarkar7407]

Wow

[@netherworldscience9438]

Fake methods. Not working at all. Lier

[@nonameguy842]

Exactly

[@anitaashok1922]

It doesn't work

[@toobabaig7630]

Panadol best iron saf krna ka lia

[@yeshashwerqjesus5910]

💝

[@meesamraza4390]

I tried and it did not work

[@somiljain1463]

Not useful

[@seemabanu49]

Your idea is not good it's not work

[@ehteshamanwar8223]

Dafa ho ami se bari galyi peri ha 😂

[@himanikatyayan8285]

Bakwas iron hi kharab ho gaya

[@kirangill993]

Different irons used

[@aasma2667]

Paracetamol Worked for me but finish of iron has gone

[@lehakaiyer6764]

Huh!!!

[@Samil53738]

Great I have Colgate

[@SparshaDeenesh]

I have also tried this and video on my channel.

[@princessyammi1019]

plx mention time how much time its take to clean it by tissue

[@SparshaDeenesh]

@@princessyammi1019 check in my channel

[@biswajitpurkayastha4055]

2nd method is not good as it will be scratched and ultimately it will be unused.

[@ArifKhan-uo3wr]

At 1:09, suddenly the iron base is clean 😂

[@altafiliyasi]

Video editing ka pura istemal😂😂

[@SamIqbal-w1q]

Bakwas bilkul b iron clean hua

[@mejustplaying1122]

Failed !! 👎👎 . Not a good idea

[@amitarora7805]

Vedio edit ki hui hai

[@happysanjana]

Colgate and soda did not work at all

[@SophiRamadhani]

Sio kweli

[@shehlaslifestyle3345]

Didn't work : (

[@saimakhan6513]

This is fake