2 NEW UPGRADES--Harbor Freight Pressure Washer(Portland)

[@HannahMattox]

That little wand surprised me 👀 I like longer wands because I like the extra reach it gives me, but I am honestly impressed with the one you got!

[@faulksportsentertainmenttv2959]

I have a both long n short.

[@HannahMattox]

@@faulksportsentertainmenttv2959 got another question for you! Can you get any kind of professional handle to adapt to those hoses, or does it have to be super specific? I'd love a nice long, chrome wand!

[@carbar3936]

@@faulksportsentertainmenttv2959 If you're wanting the wand to cover more area, you can use short gun w/ 40 degree tip on the water cannon that covers a lot of area w/out the cumbersome length of a wand.

[@sneakerstalkin]

What’s the name for the adapters? I want to replace the hose as well.

[@Daredevilry]

How do you unloosen the bottom part of the wand so I don't lose job

[@faulksportsentertainmenttv2959]

It twist off.

[@lovelycali3]

I love the mockingbird in the background singing. Also love the new upgrades I'm going to have to look into purchasing one of these power washers

[@carbar3936]

Soap's watery to me. With cheaper cannons aka super soaker try changing the orifice in your bottle's hardware (flat head screwdriver needed) to a size of 1.1 and foam will be much thicker. Also, using warm water in your bottle helps make it soapier as well. Hope this helps. 1.1 orifice costs about $10.

[@faulksportsentertainmenttv2959]

Okay

[@carbar3936]

@@faulksportsentertainmenttv2959 Oh, forgot to tell you on initial post - use warm "distilled water" in foam bottle vs water out of hose or tap due to possible hard water deposits in your area. For car washing the 40 degree tip will cover more area. Where you connect hose to bottle unscrew the bolt & inside you'll see a little round thingy (the orifice I mentioned) to change out. Was smart to get connectors, new hose, & gun. The screwing on & off doesn't wear down the threads over time using connectors. I'm an older woman who is learning the ins and outs of car detailing. LOL Never too late to learn tho. Assesscories w/ cheaper model electric PW's appears to be junk, so again smart to upgrade those. Oh, 1 more thing for faster drying = use a leaf blower 1st, & check prices on Amazon w/ other places. Guess people buying up cheaper prices on Amazon in bulk & making items sold out for car stuff then reselling for crazier prices back on Amazon of all places, so definitely shop around. Good luck!

[@vtxdaryl]

You have to push the connector attached to the pressure washer, you can’t pull on it to release the two pieces.

[@futurecamo7497]

I bought the same hose but it started leaking where you connect it to the pressure washer , any recommendation on how to fix this ?

[@docholliday9124]

The quick connect from harbor won’t fit in my Portland any suggestions?

[@faulksportsentertainmenttv2959]

Got mine from Amazon

[@ilovevag8437]

Lowes quick connect kit. $22

[@yvan6678]

Seems very strong for car washing

[@Rais1959]

Good decision bro. All the best

[@theslingmethod]

Hey, thanks so much for this, could you share the link for the replacement hose? Mine has a hole in it and I need a new one. Thank you in advance.

[@faulksportsentertainmenttv2959]

www.amazon.com/dp/B08GPGSDK5?ref=ppx_pop_mob_ap_share

[@Hector-zs5gi]

I bought the same gun. What quick connect did u put on the pressure hose for it to connect?

[@faulksportsentertainmenttv2959]

Xiny Tool Pressure Washer Adapter Set, Quick Disconnect Kit with M22 Metric Male Thread Quick Connector, M22 Swivel to 3/8'' Quick Connect, 3/4" to Quick Release, 8 Pack www.amazon.com/dp/B08SBKV666/ref=cm_sw_r_awdo_Q0TCRD5PQW409V1DWXZJ

[@johnl805]

What is that black adapter that you used to turn the machine male connection into a female? I just bought a new hose and I cannot use it unless I make the machine connection female.

[@faulksportsentertainmenttv2959]

amzn.to/2V1mB65 Click here: Here it is.

[@faulksportsentertainmenttv2959]

You should be able to buy the individual piece.

[@ernestl709]

Get a ryobi 1900 psi and a hose reel connect it to the ryobi and save you space

[@proudtobeapothead]

I bought this one cuz the ryobi sucks to actually use

[@1ffilctar]

Great video!

[@vqbrandon9706]

The hose that goes to the gun is m22 right?

[@faulksportsentertainmenttv2959]

1/4 in. x 25 ft. 3,300 PSI NEW HOSE

[@faulksportsentertainmenttv2959]

1/4 in. x 25 ft. 3,300 PSI

[@faulksportsentertainmenttv2959]

Amazon

[@carrillo1877]

Where did you buy the gun

[@faulksportsentertainmenttv2959]

Amazon $20

[@carrillo1877]

@@faulksportsentertainmenttv2959 does any gun work for this hose?

[@faulksportsentertainmenttv2959]

As long as it's a 1/4 head on it

[@carrillo1877]

@@faulksportsentertainmenttv2959 thank you

[@carrillo1877]

Where did you buy the little part you put on the pressure washer connector

[@j.6478]

What size disconnects did you use for the front and back bro?

[@faulksportsentertainmenttv2959]

1/4 disconnect

[@faulksportsentertainmenttv2959]

Amazon

[@thedailyprepper517]

Decrease your foam gun orifice to a1mm orifice fore thicker foam

[@captainkirk1745]

Replace the outlet in your gun to a 1.1mm and you'll get much better foam. About $8.

[@faulksportsentertainmenttv2959]

Thank you.

[@samidpersia9832]

You should make another video of those back and front adapters tbh. For our dumbass brain. I got the same Pressure washer and I do need to know which quick connect I need for the back hose and front and how to set up . Thank you

[@faulksportsentertainmenttv2959]

www.amazon.com/Twinkle-Star-Garden-Fitting-Connector/dp/B07FXL7W2P/ref=mp_s_a_1_5?dchild=1&keywords=water+hose+connectors&qid=1628439627&sprefix=water+hose+c&sr=8-5

[@faulksportsentertainmenttv2959]

www.amazon.com/Twinkle-Star-Garden-Fitting-Connector/dp/B07FXL7W2P/ref=mp_s_a_1_5?dchild=1&keywords=water+hose+connectors&qid=1628439627&sprefix=water+hose+c&sr=8-5 Let me know if this work, if not I will shot a video.

[@samidpersia9832]

@@faulksportsentertainmenttv2959 Boss you should definetly make a video of how to install the quick connects step by step?

[@AverageReviewsYT]

Duct tape on the 2000 psi hose. Tried to open the connection with the water on... after saying that it’s under pressure.. continued to spray self... dude stay inside.. cleverly ur not capable of completing a basic common sense task..