Best CHEAP Pressure Washer FOAM CANNON | Harbor Freight Foam Cannon

[@Auto-Bots.Custom.Detailing]

I’m not gonna lie, I loved this foam cannon! Was the first one I bought.., now have like 7… but this thing is definitely nicer than some of the more premium options….It’s no MJJC.. but I couldn’t tell you how many times I dropped this thing and it kept going, I finally broke it, took it back to HF, and they exchanged it no questions asked.. now I keep it as a backup.

[@philshock3805]

Just wanted to point out these HF foam cannons now come with BOTH the 1.2mm orifice AND a 1.1mm orifice.

[@Meep469]

How did you find that out ? Doesn’t say online

[@philshock3805]

@@Meep469 I found out by opening the package at home after I bought it. 😃 Didn't notice at the time but the package also says there are two orifices included.

[@DangerJohnny79]

​@@philshock3805I can confirm this. But how the heck do you remove the quick connect. It feels welded on. Definitely doesn't come off like in the video.

[@philshock3805]

@@DangerJohnny79 Yeah, it's definitely on there. Ridiculously tight. I ended up removing the top adjustment knob and front black nozzle piece to get a better grip where I could with an adjustable wrench. Then with a wrench on the quick connect, gave it a sharp rap with a dead blow. I wasn't going to change the orifice, but it became a quest. lol

[@PDillz]

Just came on here to mention It came with an additional orifice. The spare orifice doesn't say what size it is should I assume it's the smaller or bigger one?

[@infinimetrical]

Got one of these today during a %15 off sale. They have them at $34.99 now, and the box expresses including a 1.2mm orifice for gas, and 1.1mm for electric. I get the sense they may have made arrangements after your video.

[@coconutcreampie3795]

How do you like it?

[@keithcee6378]

I gotta say I’m pretty impressed for that price point like you mentioned, aside from that ….I’m feeling like All of us subscribers are feeling pretty pumped for your new “green soap” yessir lol

[@pullingthestrings5233]

Depends on how much it is 😂. If it can beat mr pink then I'm in.

[@1960Murf]

I got the MJJC foam cannon from you last week. It’s FANTASTIC! Thanks for all of the info you pass on to us all.

[@pullingthestrings5233]

It's not the mjjc

[@yonathanevan3334]

Have now used this to clean house siding and it performed well kzbin.infoUgkx43QMbQqu67IZadu9ou8Sg1BdrunMRNqX I also bought some wand extensions which enabled higher washing without needing a ladder. I recommend both. This unit arrived quickly, was easy to assemble (only had to attach the handle), and arrived in perfect condition. The only very slight downgrade from a perfect score is the design has a low handle and requires pulling from the side. My old washer was an upright model, while this one is more horizontal. Other than that, it's perfect for my needs. It has a great deal of pressure and more easily cleaned the house siding, porch rails and concrete than did my older model. The engine is a bit louder, as well, but the total time to clean was reduced by the more powerful spray. Did I mention it starts on the first or second pull every time?!! I am definitely happy with this model.

[@axxelhammer2596]

I bought one last week and it works great! No need for a pressure washer. Plenty of foam. Actually it made so much foam the gutter foamed up so bad I had to rinse it all down because it was embarrassing.

[@callmefrog76]

Always excited to see the noti that Josh has posted. Always good stuff, I purchased the MJJC with DTLR and won’t be needing anything different for awhile but it’s nice to see there are good options out there

[@PapaJohn1969]

I have this cannon from Harbor freight and still has the 1.25 orifice and amazed. Have the 1.1 and the quick connect set one the way. I’m thinking 25-30 foot long hose from the current 20 foot

[@stevewasilow5556]

Nice sequoia, I had an 05 350k miles, now driving a platinum 10 with 205k, runs like a champ. Rap job is sweet. Enjoy your content

[@beatfarmerfan]

I bought a Harbor Freight foam canon 2 weeks ago, and the quick connect nipple was not long enough for the quick connect to snap onto.

[@davidbaca7853]

Great video. Have you ever done a video on ceramic detail sprays ? I know you like Technicians Choice. How does it compare to Adam’s Polishes ceramic detail spray for example. And what is the best technique for using ceramic detail spays.

[@mike_0213]

I bought this last year and it never seemed to work right for me, now I know why. Thanks for sharing this video and showing me how to properly use this foam cannon and the tips on the upgrades for it.

[@RobertSmithy-y5u]

Buying my first foam cannon soon. Thanks so much for all the great reviews!

[@redbonewh]

I'm very impressed with this foam Cannon. Not too shabby for a personal home use. Like some of the subscribers... I'm waiting to get ahold of some of that green magic. Or whatever color you going to make it.

[@MissionaryForMexico]

Pop it open, Pop it off! POP! I use a Aqua Joe hose sprayer, comes with a foam dispenser, and separate gun!

[@DanielRodriguez-jk4eq]

Got this few months ago and got a new electric pressure washer with 1800 psi so i wanted to changw out the orfice but the outside part with the wrench not budging🤦‍♂️

[@imjoshv]

Yeah some have it thread sealed on. You can get through it but it can be difficult

[@Bullybeef972]

So what's the size of the orifice then? You just mentioned that it's bigger, I'm assuming it's 1.25

[@patwalker9890]

I picked one of these up because I have a local Harbor Freight and wanted to try out my Craftsman PW right away. Used it with Meguires Gold class. Pretty good results. Then got the 1.1 orifice and Mr. pink. Nice! Not an MJJC, but for home use its great.

[@peterpetru1032]

Where did you get 1.1 orifice

[@flextefitness4954]

Would be nice to know

[@ashykutcher]

Josh I love your channel but I need your help/advice. I have the Husqvarna PW2000 electric pressure washer and just got the Harbor Freight Foam Cannon in this video. For some reason the foam cannon does not lock securely in the lance/wand's quick connect and can be pulled right out. The brass ring that slides up and down doesn't return to the original position all the way and I can't figure out what's going on. The nozzles that came with the pressure washer all fit normally. Can you verify this? Keep up the great work, I've learned a lot thanks to you!

[@buttahman2010]

I'm having the same issue, haven't figured it out yet.

[@brettpotter4829]

Great review as always, had bought the MJJC last year based on your reviews but was looking for something budget friendly for a setup for a family member. HF unit peaked my interest but just bought the Armour-All based on your opinion. Much appreciated, looking forward to your soap and keep up the awesome videos!!

[@alanerpington5698]

I'd like to see a review of the Sooprinse cannon for another budget option. Saw another review on here that liked it, wanna hear what you think!

[@kenn624]

Great video, thanks for all the content! Which budget friendly 1.1 orifice do you recommend?

[@LegendsPizzaCo]

I was already leaning towards the harbor freight pressure washer and foam cannon for the price. Checmical guys are out their minds with their pricing on the Torso

[@stephenlouden480]

I'm going to get this as a backup cannon. I just add a half ounce of superclean to my soap to add a better cleaning capability to break down grime, then I rinse off and refoam with pure soap. can you do a review of Turtle wax Slick n slide n tell us what you think. it's my new favorite lubricious ph neutral soap

[@valledecauca1087]

Were does he get the 1.1 orfis?

[@whip-its_dad4239]

I was looking at this exact same gun with questions . Thank you for answering them .

[@Tyler_Bergman]

I have seen a steamer at my local harbor freight for 119 I believe but it looks like it would be a decent starter steamer

[@asdetailshop]

Was on sale for 89 a few days ago, debating on giving it a try.

[@sargonoshana2324]

What will u use for? Engine carpet?

[@sj11467]

so josh you can turn the fan direction on the foam cannon. if you turn right or left you will see the fan open in close but if you keep turning they change from vertical to horizontal

[@coreybell6398]

Remind us all that you use di water... When you getting more MJJC in???

[@coreymerritt7742]

Very cool josh I’d like to see your own soap in the mjjc cannon probably be like shaving cream lol 😆

[@coreybell6398]

Do it

[@coreybell6398]

Take my money! Green soap for the win. It has to be able to compete with Adams!!

[@thunderdanm72]

Just picked one up and added a 1.1mm orifice. It’s my first foam cannon (been and bucket and mit guy for a long time) definitely going to upgrade to the MJJC at some point be this will work for my weekend warrior style. Good review.

[@ddautodetailing]

Looks like a pretty good unit! Your soap looks great too!

[@bromovich8058]

If you had to rank the AmazonBasics, Harbor Freight and Armor All foam cannons, how would you list them? The only objective being the production of high levels of thick foam.

[@kev4498]

I'd like to know this as well

[@ronym829]

Still interested 😮

[@lloydchristmas8282]

I have Amazon

[@iamher6422]

I’d definitely go with the HF because it’s easier to replace if anything goes wrong… 🤷🏼‍♀️

[@jaytea7960]

Don’t get Amazon , I ran through 2 foam cannons . They’re done after the 8th wash.

[@Ashhong1]

I used a cheap one on Amazon that I hoped worked well, switched out the orifice, and could not get any decent foam at all with Chemical Guys honeydew soap. Returning it asap and hoping this Harbor Freight one will do the job!

[@aurorayoru5333]

The Simoniz 1800 PSI 2.0 GPM Corded Cold Water Brushed Electric Pressure Washer w/ Foam Blaster from Canadian tire has the exact casing as the active so I believe it’s the exact products

[@imjoshv]

That’s correct! Active makes the simoniz unit

[@harrymorrison9958]

We need you to test the new suds lab and rip clean ones! My old cannon broke so the suds lab is at walmart. New rip clean looks promising also.

[@sj11467]

i just brought this foam cannon lastnight and now this morning got and emailt from DTLR restock of your foam cannon hahaha

[@maggie1767]

this one has everything im looking for including the price and wide mouth. foam is great after replacing orifice. i also use mr pink and would be filling to trade it for what you come up with granted it's a good price

[@pullingthestrings5233]

Gallon jug for 49.99 plus shipping and handling

[@bobhallinan5490]

Great video and extremely halpful! I must have a bit of a defective unit because the connection to unscrew and exchange the 1.2 to 1.1 is fused on (almost like it has locktite). I probably just need to swap it for another one.

[@charleschapman2428]

It's extremely tight and it has an o ring so no need to re tighten so tight.

[@jonhromeo6108]

When you sell your soap ill be first customer man 👌

[@richsommerfield1991]

Thanks for reviewing, I purchased this a week ago and switched out the orifice to the 1.1 much better. Did you do any tutorials on detailing over applied stripes?

[@neiltsubota]

I have been waiting 2 months for the MJJC Foam Canon. Please explained what happened ?

[@coreybell6398]

I ordered one today. I hope it comes as stated,, 4 to 5 business days

[@donschultz7759]

So I need to change orfice to use this. I'm totally new to foam cannons and how to use them and all this lingo.

[@coreybell6398]

No, you do not need to change the orifice to use. If you want thicker foam then yes, replace the orifice with the smaller 1.1mm

[@donschultz7759]

@@coreybell6398 thanks .yep I realized that just now after watching several videos. Went to a store today and asked more questions also.

[@GreenBuckeye]

Thanks! Looking forward to purchasing your foam wash soap

[@dougharlow6037]

I can't seem to find a review for the Westinghouse: Pressure Washer Foam Cannon - 3600 PSI, 1/4 in. Connector, Model # PWFC, would you please do review of this product, I value you thoughts. Great video. Thanks

[@133bme]

Just bought one today and holy hell is it good for the price point. Upgrading the orfice tomorrow!

[@dannysorden8310]

I have a 3k psi subaru power stroke power washer. I was looking at this foam cannon cause of price and its just on my truck.

[@fortyforfree]

My ryobi 1800 came with a “foam cannon. “ sucks. The hose too. The gun. Wands. Replaced all that. But the foam cannon was the best upgrade. So much foam. Just gotta buy a new wash soap.

[@dougberscak1043]

I picked this one up at HF 2 weeks ago. As Josh said, it’s a good unit for $25! Used it out of the box with my CAT (Active) pressure washer and made good foam. I’m waiting on the MJJC (mid May!🤨) and just got the 1.1 orifice nozzle delivered to swap out and try this weekend! I think this will make a solid stand in.

[@ALIAS18425]

With the CAT/VE52 pressure washers, it is recommended to use a 1.25mm orifice with foam cannons, as anything lower could cause the motor to surge or draw more amps than it is rated for. I use the MJJC with 1.25 orifice and Adams mega foam with my Active and the results are great. You might be able to run 1.1 fine short term, but it may lead to a lower life expectancy of the unit over the long term.

[@coreybell6398]

So this weekend has passed, how did it work out Doug?

[@dougberscak1043]

@@coreybell6398 didn’t get to it! 🐰

[@coreybell6398]

@@dougberscak1043 Easter weekend. No worries. I’ll be getting one of IMJOSHVs this week. I’ll post about it after use, and by use I mean 370ppm tds tap water and D.I. water, a couple of soaps too

[@dougberscak1043]

@@coreybell6398Got the MJJC left the 1.25 orifice in the Foam Cannon (reached out to Active for reco) using Mr. Pink and it foamed amaz! So we’ll…the HF foam cannon is going back.

[@adrononeal3723]

I'm thinking about buying a foam cannon but what are the best soaps for it

[@javzee2315]

I bought this one Upgraded the orifice Using Mr. Pinks soap 2000psi washer My foam sucks Still too runny 🤷🏽‍♂️ Top knob cranked

[@ChrisS-if7ev]

You definitely need to check out the Sooprinse Foam Cannon. Best bottle. Has a filter on the super flexible hose. The fat tipped nozzle is fully adjustable to any angle. It for sure rivals the 100+ but costs a fraction of that price. This is the foam canon of foam canons. Plastic lid on plastic bottle by the way. It oozes of quality in your hands. Plus it looks super cool!

[@darkim808]

Will a Foam Canon work without a pressure washer? Just straight hose pressure?

[@lu_w9999]

What is recommanded water and solution ration for Meguires wash & wax? Thanks

[@kevinoldfield6435]

I just got the new glovebox with action products foan cannon have u tried it yet

[@goalscorer98]

So i got the Harbor Freight foam cannon, however i can not for the life of me get the quick disconnect off to access the orifice. Never used it yet, any other tips? Can i spray something like WD-40 or PB Blaster? I haven't put it in a vice yet for more leverage but I CAN NOT get this thing off!!!

[@birdlegs846]

do all foam cannons use the same thread size Orifice? I'm asking because I have a no name amazon foam cannon. I use the same 1800psi 1.2gpm Ryobi pressure washer that you used in this video. I use Adams Mega foam and like the way it foams but its expensive, just trying to figure a way to get more foam from a cheaper foam soap.

[@coreybell6398]

That’s a good question. So far I have only seen the one thread size. I think all are the same.

[@robertrobertson5120]

Test your new green soap with the MJJC cannon... maybe?

[@coreybell6398]

Yes. Using only one ounce!

[@ironeagle2526]

Nice pickup that thing is a beast and if its a toyota you know its well built

[@mysteryman5213]

You touched on a key point for me @ 9:20. I think most products will produce a decent amount of foam but I am more interested in how affective these products are at breaking down the soils on the paint. Is there a review of how well these products actually "clean"?

[@imjoshv]

It really depends on the soap. Typically higher ph soaps will have more cleaning ability. I’m trying to figure out a good way to actually show differences in cleaning ability but I haven’t found a good way to do it yet

[@bigstick346]

If you can't get it apart how are you planning on changing the mesh screen?

[@beachartdetailing]

You can use a hair dryer, or heat gun for loc tite to loosen it.

[@kenh733]

Just wondering did you get the Harbor freight foam canon open to check the filter? I didnt try mine yet, just wondering if its possible

[@theinsaneunknown]

I bought the Amazon basics with the new sticky foam from CG and I am not happy at all. It works better with the 1.25 installed, so maybe it's my mixture? I'm using it with a Sunjoe SPX3000 so if anyone has any suggestions, let me know. Thanks.

[@spottedmahn]

Where’s the link for the foam chemical? Mr Pink I think you called it 🤷‍♂️

[@Dougie085]

How does this compare to the sooprinse and so on units that you’ve liked as well? The HF is now $33 and not sure if it’s worth that much now.

[@mrobvious1100]

2 questions number one what is the purpose of putting soap on your car. Number two I have the Harbor Freight Green electric pressure washer and it came with a foam Cannon, so is this one that much better than the one that came with the unit

[@ewitodaaabeaner9643]

I just bought a powerhorse pressure washer 3200 and idk how to add the foam or like make it foam idk like what do I buy setup wise

[@matteblack7845]

I just bought this foam cannon and all it does is shoot out a straight stream of foam. Not the fan type spray you’re getting. I tried adjusting it but no luck. Wonder if mine is defective or something

[@suprola7961]

But where do you get the orifices from?

[@weybrew]

Would you kindly compare the HF, Amazon, and Armour-All foam cannons? Preference?

[@motogstylus3260]

Looking forward to more info on that soap. Really hoping it's biodegradable.

[@johnneidert5777]

Same here Josh. As I'm local, I'd be more than happy to be your beta tester with the MJJC and Chemical Guys Brilliant Finish foam cannons.

[@coreybell6398]

Me too! His company name is Detail Green USA so….

[@johnneidert5777]

@@coreybell6398 Yes, I know. I've been to his workplace in San Diego before. It's easier for me to pick up directly instead of having him ship.

[@coreybell6398]

@@johnneidert5777 I’ll pay shipping to test it for him?!?! Haha yes hopefully it’s a home run

[@TheRedRaven_]

Can you use liquid wax with a foam canon? I'm trying to eliminate going to the car wash but also I'm not too keen on hand polishing so I gravitate towards the liquid solution.

[@JohnScriven-j4j]

Anyone have trouble getting the quick connect off to change the orfice? Mine must have loctite on it??

[@detonationpyrotechnics4156]

The relief valve keeps your pressure washer from over working/ over amperage.

[@paulrescue]

I have a Harbor Freight foam cannon I tried to swop out the orifice but i couldn’t get the quick connect off It feels as if manufacturer put loctite on it

[@JohnScriven-j4j]

Same here.

[@travisstamp7428]

So, does it come with 2 different sized orifices? If not, where do i get the one that isnt included?

[@A5Skavanger]

I still highly enjoy all these other foam cannon reviews even though I know they won’t compare to the MJJC I got from your site.

[@franciscofranco9148]

Hello greetings! Could you recommend a good foam cannon for my 1600 psi pressure washer. Thank you.

[@AngelA-fj8ft]

How do you know what size orifice you have by looking at it? Is there a marking somewhere that gives the size? Also, can you please review foam cannons like Tool Daily? Thank you very much. Again, your favorite soap seems to be Mr Pinks and Adam's? Thanks.

[@a1dd3n]

When you releasing your own soap, and red color should lool cool!

[@donschultz7759]

Wondering when your car soap comes out that your designing?

[@PDillz]

Just bought this and plan to use it with my Ryobi 3400psi with 2.4GPM, i know it list 3300psi as the peak to use with this but is 100psi really anything to worry about? Also what about the GPM?

[@eduardjimenez1106]

Somebody explain me how he took off the quick connect so easy I can’t do mine it’s tight as hell, HELP!!!!

[@danielm.9818]

Can you please test the ryobi 2300 with the 5 in 1 nozzle and report back what psi it is getting?

[@erichelton1888]

Sadly, I bought the Armor All after you reviewed it and they had changed their style to a 2-in-1 with a non-adjustable filter in the end. I'll be taking it back and buying one of these or another that you've reviewed. In time, I'll get to invest in one of the nicer ones.

[@gymbo343]

Would you recommend the harbor freight cannon over the Amazon basics one?

[@coreybell6398]

I would

[@francois-xaviercadieux332]

Not a rocket scientist, but I dont really get how the gallon per minute can change anything to the foam canon since we are only letting 1,1mm of space for the water to go trough. I have the upgrade gun, flexilla hose, griot’s foam cannon matched with the Adams mega foam. I dont have that thick foam i’m looking for. This set up is plugged into an electric Karcher stating 1800 psi and 1,3 gpm. Do i really need to upgrade the pressure washer? Soap ratio about 1 for 4 and 1,1 mm orifice, my water isnt hard. Any help?

[@PhOeNiXpIoLe]

For some reason the one I purchased sprays a single jet out of the nozzle no matter how I adjust the fan pattern, do I need to swap out the orifice or is it defective?

[@TheBassallyear100]

As a side note to this (and other reviews you do) the wand nozzle ratings of 3.0 and 3.5 are equivalent to 1.09 mm and 1.22 mm orifice openings (both a tad smaller than comparable used in foam cannons). At the preferred ~1100 psi spray a 3.0 orifice should be discharging ~1.55 gpm and the 3.5 orifice should be discharging ~1.9 gpm. a great indicator for why the 1.25 mm orifice installed in most foam cannons struggles with electric washers since few, if any, can do 1.9 gpm at 1100 psi.

[@cmonaghan68]

I use a 1.1mm in mine and it makes a big difference in the thickness and quality of foam, and that’s with 2000psi 1.4 gpm machine

[@peterpetru1032]

Can the HB Canon take your 1.1 orifice

[@project_poor_runner]

Any tips for getting more foam out of a Ryobi 2700 psi, 1.1 gpm electric power washer?

[@richardschaffling9882]

Nice but do these foams work on dried bugs on motorcycles

[@imjoshv]

Depends on the chemical being used.

[@TheBassallyear100]

love the sequoia! i have its baby brother, the 4runner. can't believe how quickly you turned this video review around!

[@matthewstringfield8924]

On the turtle wax foam cannon or the one from harbor freight where do you get the smaller piece to swap out to get more foam?

[@coreybell6398]

He sells them on his DTLR web site

[@joonkim1289]

does this work with the portland 1750?

[@isaacflores8030]

I got the mjjc pro foam cannon and I still can’t get really good thick foam. I switched to the 1.1 and it’s still not as good as you show it in the videos

[@coreybell6398]

What soap are you using?

[@isaacflores8030]

@@coreybell6398 well I got mr pink and sticky snowball

[@coreybell6398]

@@isaacflores8030 wow, both should foam like crazy. I’m wondering if Josh using DI water during every review how much that matters. That’s an idea for him… re test all again using just tap water???

[@sargonoshana2324]

Check your pressure washer filter, mine was clogged.

[@coreybell6398]

@@sargonoshana2324 which filter? The inlet side?

[@adrianb1655]

So would this be good for the price if using a gas powered pressure washer?

[@aurorayoru5333]

And I Confirmed on Simoniz’s website they have the exact video of the pump