BEST PRESSURE WASHER UPGRADES FOR DETAILING CARS | Perfect foam cannon setup!

[@AutoHeadz]

LINKS FOR SETUP BELOW! QUICK CONNECTS - amzn.to/40dSabj UBERFLEX HOSE - amzn.to/3XlgXqM WATER HOSE - amzn.to/3DXaJEH MCKILLANS SPRAY GUN - amzn.to/44cZEuC MJJC FOAM CANNON (as seen in video) / AMAZON LINK - amzn.to/46vV23j PRESSURE WASHER SPRAY TIPS - amzn.to/3KreDJf CHEMICAL GUYS STICKY SNOW BALL - amzn.to/ 3u2ljEN RYOBI PRESSURE WASHER - amzn.to/4cCR7VT PRESSURE WASHER SPAY TIPS - amzn.to/3RpuEEz

[@rizzo3689]

Thanks for the update on the quick connects since I noticed in your video you showed 6 of them on the tailgate but I guess you already had 2 installed on the kink free hose. I see now there are 8 in the pack. Great video! I wanted an easy way to clean our new boat and I HATE using our gas power pressure washer and hose that will just loop up and kink if I stare at it long enough. Man great content. Liked and subbed!

[@elmcitydetailing]

Amazing video. Thanks for the reviews.

[@elmcitydetailing]

The blue hose does not fit my Simoniz pressure washer.

[@rosshanchett]

I purchased everything in this video and for a home set up to wash 2-3 cars a week it is amazing. Thanks for putting this video up. Highly recommend this set up. Car detailing is now so much more enjoyable.

[@sitorp116]

How is it still holding up ?

[@rookiboi26]

Still good?

[@AutoHeadz]

@rookiboi26 Amazing. Can’t kill it.

[@rosshanchett]

@@rookiboi26 Yes everything is holding up great! I’m considering adding a hose reel for convenience but not necessary.

[@PROutdoors94]

Great video. Every single thing I despise about pressure washing is resolved by the upgrades you mentioned. Quick connects, flexible hose, swiveling gun, I need all these upgrades!

[@AutoHeadz]

Wow! What a great comment!

[@chrispewkreme]

Also, some friendly advice for someone wanting to use their pressure to make money: Put in whatever tip you wanna use and give it a pull. Then spray at the ground for a second or two. This just ensures the tip is locked in. The last thing you wanna do is be expecting to get paid to detail a car and then having to replace a window or get a dent pulled and painted.

[@AutoHeadz]

Great tip! No pun intended

[@edgy179]

I do it all the time just me. I did it to my old car and learned quick before detailing other people. Btw wearing flip flops don’t aim it at your foot you won’t have a fun time

[@nickhardner6691]

@@AutoHeadzdid u keep the 1.25 or switch it for the 1.1 oriface

[@AutoHeadz]

@@nickhardner6691 I switched to the 1.1

[@nickhardner6691]

@@AutoHeadz ok

[@heniz100]

This is the video that started it all for me. I got all the items in this video and went on a tear! I just recently upgraded to the Bigboi Pro, Mckillian pro gun and kevlar lined hose. thanks for kicking it off.

[@AutoHeadz]

That’s awesome! My pleasure!

[@Patayder]

Purchased a majority of this setup a year ago and it has made detailing way more enjoyable!

[@AutoHeadz]

That’s great to hear. Such a nice setup!

[@mariol6095]

Just wondering if your still using this pressure washer and if so, hows it holding up?

[@Patayder]

@@mariol6095 Hey, I forgot that I commented this lol. It is holding up great and I have no complaints.

[@sitorp116]

@@Patayderworth buying ?

[@Patayder]

@@sitorp116 yes

[@TRIGGAMAN_LOCO]

I've washed my car 3 times since I bought a pressure washer. Never thought to buy a quick connect kit. Game changer! thanks

[@AutoHeadz]

No problem!

[@ERDG516]

I picked up the pressure washer at home depot for $109.00, amazon wanted $145.00. I did get all the other items and detailing is much more fun. You helped me connect the fittings and hoses, good stuff

[@AutoHeadz]

Good move. Thanks!

[@tsunami6253]

YES!! My Ryobi is still holding strong for over 6yrs. The first 3yrs, I ran in it with hard water and didn't maintain it at all. For the price, its worth it.

[@AutoHeadz]

It’s an absolute steal! Love it!

[@hotwater8473]

What have you done to maintain it the other 3 years?

[@Checkitwithamagnet]

At 2:47 it appears you wrap the teflon tape counterclockwise. It should be wrapped clockwise so it will not bunch up when you screw in the fitting. Moreover if there is a rubber grommet/washer, you do not typically need teflon tape. In any case, thanks for the video and the useful tips.

[@AutoHeadz]

Yes, thank you, I am aware of this and noticed the mistake after recording. Good eye! Lol I like using Teflon to help prevent brass corrosion which inevitably will cause leaks.

[@Tizzy-sh5ql]

wow thank you for that tip i prolly wouldve kept applying that stuff wrong rest of my life

[@terryosowski8143]

Yea I noticed that too !!!

[@geeznzeez9464]

Looked for this comment😂

[@AutoHeadz]

@@geeznzeez9464technically the knob used to tighten it down spins counterclockwise but…..yes KZbin comment section rules all. Lol

[@hotwater8473]

Best video out there for this unit, thanks for taking out all the guesswork so the weekend warrior can get his detail on!

[@AutoHeadz]

🙏🏻 Thank you!

[@carantsan]

Such a nice and easy video for people starting with pressure washers and stuff. I’ll be getting this setup since I already checked online everything you suggested. Thanks a lot for this!

[@AutoHeadz]

Thank you so much for the great comment. I think so too. 😃 I’m trying to win an Amazon competition this month. If you use the links I provided in the 1st comment or video description when you decide to purchase I’d really appreciate the help. Thanks again for watching man. ✌🏻

[@Eatshhhushi]

Thank you dude, the quick connect is a god send. Never thought of it until now.

[@AutoHeadz]

Oh man it’s night and day better. Enjoy!

[@soggyfries4347]

Pretty much same setup but I'm using the RidgeWasher foam cannon. Its the sleeper of the foam cannons. I was fed up with all these crap foam cannons and was about to cough up the dough for an MJCC but on a whim decided to try one more cheap cannon. This Ridgewasher is putting out that thick foam from the Ryobi pressure washer all for only $20 and comes with a nice quality wash mit as well. I also couple that factory hose that comes with the Ryobi to the Uberflex hose which give me a total of 75ft of hose. This allows me to leave the Ryobi in the garage with the door shut without having to sacrifice any length of the 50ft Uberflex. This virtually makes that high pitch sound of an electric pressure washer completely silent. Totally makes the car wash process much more therapeutic.

[@AutoHeadz]

That’s an awesome setup. I do the same thing. I leave the pressure washer in the garage and yes it’s so nice not hearing that thing going lol.

[@BlueSharkRides]

Glad I ran across this. I bought my own house recently and picked up that same Ryobi pressure washer and hated the hose / wand it comes with especially using my foam cannon. Gonna pick up all these attachments and you made my search super easy.

[@AutoHeadz]

I’m glad you found the video helpful! How are you liking your setup?

[@BlueSharkRides]

@@AutoHeadz It's been way nice! Only thing I gotta figure out is a reel for the pressure washer hose since winding it up by hand sucks. Other than that it takes me 5 minutes to get going! I'll probably upgrade to an active pressure washer for more water output for my big truck. It likes to dry before I fully get finished hand washing if it's a sunny day. But having everything on quick connects makes life so much better.

[@AutoHeadz]

@@BlueSharkRidesGood man. Well stay tuned. My review of the Active 2.3 will be out next week! 🔥

[@STREAMSPLUG-h3j]

@@AutoHeadzshould i get that instead of this

[@vitaliypiltser]

Thank you for this video! You did an amazing job and presenting all the necessary info without any unnecessary fluff! I just picked up the whole package - can’t wait to give it a shot.

[@AutoHeadz]

You’re welcome! That setup is so nice. You will love it.

[@AnakinVeyder]

You are a true life saver ! I was able to bring back my pressure washer to life ! Thanks for this video!

[@AutoHeadz]

LETS GO!!!! That great man!

[@ericaaraujo7171]

After watching this video i bought everything from this setup, the best setup i had thank you 💯

[@AutoHeadz]

Great to hear!

[@tannerhedgpeth6382]

I'm stealing this setup

[@MetroBoy402]

You’re the man! I was looking for a better way with my existing Ryobi power washer as opposed to investing in a newer option. Thank you, Thank you, Thank you.

[@AutoHeadz]

You are welcome!

[@Solinvictus100]

Thank you for this vid! I was sweating putting together a kit. This made it easy!

[@AutoHeadz]

My pleasure man. Enjoy it!!

[@craveferoini9007]

Thanks a million for this demonstration and very detailed parts descriptions! Your awesome!!!

[@AutoHeadz]

Your awesome! Thanks!!

[@roygreen-wk5or]

Thanks for the heads up on this royobi pressure washer. It worked great for the first use. I just brought it yesterday. I also brought the quick connect kit, along with the short nozzle.

[@AutoHeadz]

No problem man. I kind of feel bad. The price has gone up a bit since I first purchased mine. They are constantly selling out everywhere. Fantastic deal still though.

[@miami3863]

@@AutoHeadzI think you linked Amazon for the pressure washer but HD still has it for $99.

[@jimmyhuynh8228]

This video saved me so much time.

[@AutoHeadz]

Thank you for saying that. Enjoy it man. It’s a great setup.

[@aaron30569]

I'd recommending 3d nanopail super soap would be the best for new detailers. you can order them with a 3/4oz pump and only 1 pump is needed for a full 32oz foam cannon makes it so easy! Also that ryobi PW is always $50 for black friday

[@AutoHeadz]

Wow thank you! I’ll definitely try that out.

[@photog1529]

I bought pressure washer about two months ago...didn't see the need to buy anything larger. I paired it with a McKillans foam cannon, quick connect kit, and a swivel handle. The Ryobi works just fine...plenty of foam, and so far not a single issue. I picked it up on sale at Home Depot for about $89 or so. But you will need an adapter (M14-22 male to M15-22 female) to hook up your hose and foam cannon...seems Ryobi uses an oddball size on the unit. Very pleased with my setup so far.

[@AutoHeadz]

Hey man. Just to clarify. Are you saying that they changed the fittings on the Ryobi? Like your Ryobi is now different than the one I used in the video to demo the quick connects?

[@osamadar8826]

@@AutoHeadz he must be confused, Ryobi makes only 14mm from my understanding

[@druv2458]

Just had my first wash with this set up loved it.

[@AutoHeadz]

LETS GOOOO!

[@Tweaked818]

Same lol now im offering my family a complimentary wash just cuz

[@druv2458]

@@Tweaked818 lol 😆

[@AutoHeadz]

Ohhh they got you now. Don’t do too good of a job or they will be asking for another one lol

[@alex-sd]

Thanks for the hose and quick connects info. Just got the Ryobi and very happy with it replacing a Sunjoe.

[@AutoHeadz]

Enjoy it! 🤙🏻

[@James-dy6zh]

I just got this complete set up and its freaking amazing dude!

[@AutoHeadz]

Isn’t it great?! You really can’t get a better setup for the price. 👍🏻

[@samuelzukauskas8233]

Best instructional videos in the business!

[@Fingamyaz]

Just bought all this. Works great.

[@AutoHeadz]

ENJOY IT!! Can’t beat this setup for the money.

[@DavidAlexJonas]

I took your advice and bought the Ryobi pressure washer and all the goodies you suggested. I used it today for the first time on my brand new Lexus IS350. 😊 it worked well! I got the version three of the foam cannon and found out that I don’t need to fill the bottle for such a small car. Other than that, it went well. Enjoy your videos!

[@AutoHeadz]

Amazing! Thanks for the great comment. I love hearing stuff like this. I’m glad you are enjoying your new setup. I have a 2007 IS350! They are amazing vehicles. Enjoy!

[@dontgetsalt2045]

Under rated video

[@AutoHeadz]

Thank you!!

[@dianecressotti4829]

Followed your recommendations it is really making detailing my new F-150 alot more fun........Thank you !!!!

[@AutoHeadz]

Hahah! It’s a blast. Thank you and enjoy!

[@josephgilbert1856]

finally a simple no bs guide of what ya need to warsh a truck

[@kylespringford5116]

Take that r outta there cletus!

[@renotimberwolf2139]

I bought it all with your links! Great video!

[@AutoHeadz]

Thank you sooooo much! I appreciate you brother.

[@pherron7471]

Thank you bruh. I appreciated the video and bought everything through your links.

[@AutoHeadz]

🙏🏻 Thank you so much for the great comment. I very much appreciate you. Have a great day man.

[@3obardThawn3]

Great video. I just went out and got a ryobi washer, thanks for the upload

[@AutoHeadz]

Thanks! Enjoy it!

[@SmokeCityBBQ-is7vj]

I bought most of this setup and i am extremely satisfied. thank you

[@AutoHeadz]

Enjoy it man and thank you for the great comment. 🔥👍🏻

[@Sonny__b]

Thank you for this video. Starting a mobile detailing business from scratch and this really helps.

[@AutoHeadz]

Awesome man! Good luck. It’s a great way to get started. Thank you for the comment.

[@Hamuraii]

how’s the business going

[@Sonny__b]

@@Hamuraii really good I would not recommend leaving your job right away because the first couple of months can be tough. The best advice I can give is when you get the clients you enjoy working for try to get them to be a maintenance customer. The customers who pay well but give you a hard time or just not easy to deal with in my opinion are better as a one time service. Also make sure you take videos and pictures of every vehicle before you start and after you finish. I have had three people so far try to claim that I either cause damage or did not fix/clean what they asked for. All three of these people were proven wrong with my video I took before I started.

[@arckanum332]

Thank you for this video, I'm new to detailing and this helped immensely

[@AutoHeadz]

Enjoy it man. Did you put your kit together yet?

[@davidaubin3449]

I just ordered all the accessories as you pointed out. Thanks for all the help.

[@AutoHeadz]

My pleasure! Thanks for the great comment. Let me know how you like it when you get it all setup.

[@2Shine55]

Got the same pressure washer a few years ago, it’s a beast for sure!

[@AutoHeadz]

It’s amazing!

[@nics8040]

Can you use to clean sidewalks or is it not powerful enough

[@2Shine55]

@@nics8040 Depends on what degree nozzle you use but, yes it can clean a sidewalk.

[@AutoHeadz]

@@nics8040 Absolutely. It’s surprisingly powerful for the size.

[@JEFFsoBOMB]

I'm about to purchase this setup per your recommendation! Thanks!

[@AutoHeadz]

You are going to love it. Let me know how it goes after your first wash. ✌🏻

[@aroldofranco48]

This is the exact set up I have but I have a mtm sgs35 acqualine I love that thing

[@AutoHeadz]

What a perfect setup. I haven’t tried that out yet. I’ll have to look into it. Thanks for checking the video out, I really appreciate it.

[@Rizzy4magic]

I use this video Links to build my wall mounted pressure washer setup with the same pressure washer. Everything's been great. Surprisingly, the only failure point was the uberflex

[@AutoHeadz]

Wow! That’s the first I’ve heard of one failing. What happened?

[@Rizzy4magic]

@@AutoHeadz it swelled up and burst by connection point. I Did have it on a hose reel. just ordered a flexzilla hopefully it gives me better results on my hose reel

[@AutoHeadz]

Wow! Keep me posted on what you find. I’m interested to see if it’s any better. Good luck man. Thanks for the great comment.

[@honestnewsnet]

Excellent video. Thanks

[@AutoHeadz]

Thank you for saying that! Thank you so much.

[@honestnewsnet]

@@AutoHeadzJust ordered my upgrade quick connect. Thanks again.

[@AutoHeadz]

@honestnewsnet Enjoy it!

[@honestnewsnet]

@@AutoHeadzDid you read the 1 star reviews on this quick connect kit? Very dangerous. Take a look at the 1 star reviews.

[@neverfalter6702]

Glad I found this video. I have the same pressure washer and I absolutely hate the hose it came with

[@AutoHeadz]

Thank you checking it out. My next video is a detailed review of the top 4 highest reviewed hoses on amazon.

[@chrislorenz4468]

Just got the whole set up is awesome

[@AutoHeadz]

Excellent! You are gunna love it. Enjoy

[@redtanrt10]

Thanks for all the tips and the products!!!!

[@AutoHeadz]

You are so welcome!

[@adanarias2122]

Great video just what I was looking for 🙏

[@AutoHeadz]

Great to hear!

[@arathchapa1764]

Great detailed step by step video ! Thank you man ! 🫂🫶

[@AutoHeadz]

Hahah! Thank you! I really appreciate that! 🙏🏻

[@driddick80]

Awesome video man, just starting to get into this pressure washer/foam cannon stuff and you just gave me my setup man, amazing step by step informative video❤️

[@AutoHeadz]

My pleasure brother. This is an absolutely sweet setup. Did you get the stuff yet? Let me know how it works out?

[@driddick80]

@@AutoHeadzAfter using this setup a couple times on my truck, it makes washing it a breeze and enjoyable, such a great setup at an affordable price too.

[@AutoHeadz]

@@driddick80Such a great little kit. It’s therapy for me at this point lol.

[@pwf6981]

Fantastic tutorial!

[@AutoHeadz]

Thank you!

[@danwatkins1191]

favorite video on youtube. Thanks for all the great tips!

[@AutoHeadz]

Wow, thanks!

[@shadyabhi]

2:50 For folks watching, you should put teflon clockwise, when looking at the nozzle.

[@JR007x]

Thanks so much great video and appreciate all the tips and links! I’ll be ordering soon.

[@AutoHeadz]

Oh man, my absolute pleasure. I’m so glad people found this video so helpful. Take care. Happy detailing!!

[@ripdmoneygaitan]

thank you so much. im truly grateful for this video. i just ordered the pressure washer, the quick connects, the foam cannon, the hose and the swivel gun.

[@AutoHeadz]

Awesome man! You will love the setup. Let me know how you like it after you get it all going. Happy detailing!

[@houdavn]

This video was invaluable in creating my own setup in my garage. I made a video with it on my channel, so thank you for this.

[@AutoHeadz]

Just watched it. Very nice setup. Glad I could help!

[@JohnWick-wm4pd]

Thank you for this video.!! I’ve been looking for this type of video regarding supplies and that they won’t kill your wallet.. Thx!

[@AutoHeadz]

My pleasure! You can’t beat this setup for the price. Happy detailing!

[@brcluster7590]

ryobi my company has one and it works amazing and not too noisy is another plus !

[@AutoHeadz]

It’s such a bargain beast.

[@xxHydroponicxx]

Hey! Thank you so much for the video!! I’ve been thinking about getting a Uberflex for my Karcher and you’ve just sold me on it!

[@AutoHeadz]

Glad I could help!

[@jettangeles2707]

i just bought everything in this video except for the power washer & its amazing. really changes the experience of washing cars.

[@AutoHeadz]

Isn’t it great?! Hard to beat for the price. I have a bunch of great content I will be sharing soon. Stay tuned!

[@jettangeles2707]

@@AutoHeadz i've been washing cars for a while week & the experience is truly magnificent. just night & day difference compared to using stock stuff. i'm looking forward to buying a 3mm orifice nozzles

[@AutoHeadz]

@jettangeles2707 that’s awesome man. It really makes washing your car a whole new experience. Enjoy!!!

[@tstyle76]

This is the exact setup I needed! I bought everything you suggested!

[@AutoHeadz]

That’s awesome. Enjoy it! Did you put it together and use it yet?

[@cheaville]

I bought that mckilians gun love it

[@AutoHeadz]

Yeah man. It’s a beast. Big fan.

[@richardortega5917]

🙏🏽 I was just about to get rid of this one but you just saved it I got to go pick all that up

[@AutoHeadz]

Oh man it’s a game changer. Let me know how you like the upgrades.

[@joonwy]

Any tips for using this in winter? or do you not use it in winter time?

[@dxhound4216]

Enjoy your videos, some great tips and products you are recommending!

[@AutoHeadz]

Thanks a lot man I got a bunch of really great detailing videos with some of the best new products coming out soon! Thank you for the great comment and kind words.

[@darrianbenjamin7292]

Fo you have links to the products. I need all of them. I just picked up a Sun Joe washer from Sams Club last week. I hate how stiff the hose is. Is this a better washer?

[@AutoHeadz]

All of the links are in the video description and I also posted them in the FIRST comment. I think this is the best P. Washer for the price hands down.

[@darrianbenjamin7292]

Thank you! I overlooked it.

[@AutoHeadz]

@darrianbenjamin7292 my pleasure man. Reach out anytime if you need help or have any question at all. That’s why I do this. Enjoy.

[@ksoman953]

Thank you. I always give a thumbs-up & comment on videos that are almost at the level of public service, which this is!

[@AutoHeadz]

So nice of you to say! Having a set up like this is such a game changer. What other content would you enjoy seeing?

[@jasonderby7635]

Great content. I’m gonna copy this exact setup. Thanks!

[@AutoHeadz]

That’s awesome enjoy it! Once you get it all set up let me know how you like it.

[@jstyleent]

Perfect Video! Just what I needed. Thanks!

[@AutoHeadz]

Wow! Thank you!!

[@erniearambula3525]

What's great about the upgrades each piece can be purchased one at a time or all at once depending on one's finances.

[@AutoHeadz]

Absolutely

[@Roosterrice]

Love the video, good work!

[@AutoHeadz]

Thank you!

[@rachelhoyle5728]

Thank you for this video! I was looking for this same setup and same equipment. This helped a ton!

[@AutoHeadz]

My pleasure! Thank you for watching it

[@theGRNapples]

Will these upgrades work with the Harbor Freight Portland pressure washer?

[@AntLive29]

Fantastic video. Thank you for putting it together. ROCK ON!!!!

[@AutoHeadz]

Wow! Thank you very much for saying that! 🙌🏻🔥

[@rickraub5448]

Tks! Just bought a used ryobi pressure washer $60 and will buy the rest of the stuff from your video post. Thanks so much for making this video.

[@AutoHeadz]

Thank you so much for saying this! Love hearing this. Enjoy the setup 🙏🏻

[@rickraub5448]

@@AutoHeadz ur welcome. Videos like this are very helpful and save people a lot of time when you share your experience on what works and what doesn’t.👍👍

[@vickychen2472]

I like the tools and the video

[@mathi9g398]

The boys & I will be driving from Miami to Gatlinburg for a car show in a few weeks. This video was great informative. Pretty much bought everything on the list for quick details at the Airbnb. 😂😂

[@JacobRDoty]

I have the same kit and it's awesome that you did literally EVERYTHING the same. Flexzilla hose with quick releases - foam canon etc. What's your solution for the power cord? That's the one thing I dislike about it - the onboard storage strap is awful

[@taekimdenim]

Thank you so much for this video. It helps me a lot who is new for car washing at home. can you recommend right orifice size for this ryobi washer? for 40 degree. I am thinking 40 degree 4.0 orifice for safe use.

[@g-rock19]

The part about “not pissing off your wife” with different connections is the most valuable piece of information here 😂

[@AutoHeadz]

I shared it because I lived it. You’re welcome. lol!

[@neru777]

Nice! But.... you forgot one more thing! Upgrading the tips to 3.0 orifice, you will get better GPM. I think is from 1.2 to 1.5 i dont remember well 👈

[@iokuse8498]

Thx for info been looking for pressure washers

[@AutoHeadz]

Your welcome man. Thanks for checking out the video.

[@bch5002]

Great video. However, i should add that the quick connects are made of brass and the fittings for the hose look like they're aluminum. Bad idea as it will corrode once water is introduced. Better to get aluminum fittings for the hose.

[@markim5087]

Brass has worked fine for many yrs , it won’t be pretty sure, but I’ve had them forever, still got one from the 1990’s ,just changed the rubber rings..salt water tears them up,for sure, but if you clean and rinse it they are normally fine..I’ve seen both have issues too..

[@waynemiller1609]

Would this setup be ok for matt paint? Thanks for a great video!

[@AutoHeadz]

Thank you. Yes. The soap is PH neutral. Just be gentle with washing. Nice plush mitt if making contact with paint.

[@rosm1226]

Sweet setup. Hace you tried the Fierce Jet hose instead of the uberflex?

[@AutoHeadz]

No I haven’t, should I?

[@rosm1226]

@@AutoHeadz Saw them at a few commercial car washes and then bought both the 1 wire and 2 wire versions. My guys are impressed

[@AutoHeadz]

Nice! I’ll have to try it out

[@Pete391]

What is your mixture of soap to water in your foam cannon...Thx..

[@TheSprinterVan]

That set up rocks, THANK YOU! The video you shot was with that pressure washer 1.2 GPM? Also was that the stock orifice that came with the Canon? Or did you change It to what size? Great video thanks

[@richardfarmer6570]

Nice setup. I am using a Sun Joe 2250psi but with the same hose, love the flexibility and extra length. The gun looks really good and think I will have to order one.

[@AutoHeadz]

Thank you! The gun is fantastic, especially for the price.

[@dougprentice1363]

@@AutoHeadz My gun doesnt have a swivel, but the quick connect fitting lets it turn some. Not smooth like that gun. Do you know of a fitting I could buy separately?

[@nilleftw]

The reason you're running out of soap is because you're using too little water. Your foam looks like shaving cream. It's supposed to be thick, not solid. It needs water.

[@coltonberry9579]

more water as in dilution in the bottle or gpm of the pressure washer/water spiget pressure

[@mariol6095]

Yeah, what he ☝🏼asked

[@yeahh_idk_]

We want it like shaving cream 🤡

[@AutoHeadz]

Yup!

[@MCP2002]

​@yeahh_idk_ Ideally, you don't want it like shaving cream. You want it a little thick, but not so thick it just sits there or takes forever for the sheets to fall off. You want it to run a little so it pulls debris/etc. down.

[@destroy43]

The JOSHV kit right here, lol

[@FourFront99]

right

[@jrose7381]

Good thing the

[@actiongames7953]

what about the mckillans foam can?

[@AutoHeadz]

Iv never used it. MJJC is hard to beat though.

[@Gretzky2857]

I just purchased the griots foam cannon and really like everything available in your video. Will the griot foam cannon connect nicely like the one in the video? Thanks!

[@AutoHeadz]

Yes it will! The Griots will work perfectly with this setup.

[@Gretzky2857]

@@AutoHeadz great, thank you!

[@siradinar]

Thanks for the recommendations & detailed reviews! I have the 1600 PSI version of the Ryobi (got a great deal on it) but the gun/hose that comes with it isn't the best. The upgrades you mention aren't exactly inexpensive now but I might slowly upgrade it over time. I can see the benefit in the quick connects, hose & gun. I could probably save some money with a shorter hose.

[@AutoHeadz]

You are welcome! Yeah, I see the prices go up and down week to week. The quick connects are a MUST in my opinion. Uber flex hose is probably the next must have. Thanks for the great comment.

[@gadget231]

You should look at the "AVA" brand pressure washers if you can get them over there. They come with most of these upgrades as standard and have a 10 year warranty... Fantastic machines 😃

[@patrickkeschl596]

I did this exact setup and the ryobi kept surging. I had to use the long wand it came with to stop the surge. The short gun was the problem. Not sure why.

[@AutoHeadz]

Make sure you run water through the system for a full 30 seconds before turning on the pressure washer. That will ensure the system has no air in it. Sounds like you have air in the system.

[@IainB]

I bought those same quick disconnects a couple of years back for my Ryobi pressure washer. They were leaky junk, returned them to Amazon after a single use.

[@AutoHeadz]

That’s weird. Had mine for 3 years no issues

[@Amazed_You]

what hose would you recommend? the one I get from Home Depot breaks after a few weeks

[@AutoHeadz]

These are sick. amzn.to/3CNAAhP