$2 repair! (Gear Assembly) Part 2 -Fix restring offset / overhanging umbrella using parachute cord!

[@debraghclairoux7117]

Thank you, thank you, thank you for part 2! I'm a 67 year old widow, doing a lot of things on my own. You showed me exactly how to get that gear box apart, (and I did snap a picture of everything lined up.) then put it in WD40 to soak. I'm so proud of myself, it's done and it works! And those umbrellas are heavy and awkward to work with. Thanks again, I couldn't have done it without your video.

[@athomehack7789]

Very glad it worked for you & had that “satisfaction feeling” afterwards. I always try to find a way to fix before I buy the replacement. (or repurpose the materials for a different fix) Keep on rockin’ widow of 67yrs, you got the skills!

[@debraghclairoux7117]

@@athomehack7789 Project before this was the deck. I bought myself a belt sander for my birthday, sanded my deck, scrubbed with deck wash, then stained it. Took a week! Bought a 4 piece patio set, which came in 1 box, bag of screws and an allen key( I hate those things) Got that done too. It looks great. On to the next must do!

[@teresameherg1472]

Solid advice, thank you! After three summers without our umbrella I was able to repair it in an afternoon using your videos.

[@mary-ellenscrivens8709]

Thank you very much for this. I thought I was going to have to buy a new umbrella after just one year. Turns out it was just a snapped cord. Now I know how to restring it and rejuvenate the crank assembly. I really appreciate the help!

[@sandischempp9706]

Thank you so much. Your directions were right on and very helpful. You just saved us from having to buy a new umbrella. Again thank you.

[@a1tank400]

Just what I was looking for to restringing my umbrella and put the gears back the way they were. Thank you you're the best.

[@mathewdobson4810]

And another thank you. Just fixed my 18month old umbrella. Internals identical. Need a cover now as she is pretty rusty!

[@mimmie1375]

Thank you so much. Mine fell apart inside the cover and had no idea what order the washers went back on. This helped tremendously.

[@tammywright6636]

Rock Star!!!! Your video helped me fix my umbrella. You are awesome!

[@vantonio19]

This is the video that I was looking for... How to repair the manivel. Thank you 👍

[@sandgroperwookiee65]

Thx heaps for this cobber👍👍 With yesterday and today being 41c (105f) I needed to fix my umbrella as the string snapped last week. Cheers🍻🍻

[@debbieschramm2387]

I've watched several of these repair videos and they are very helpful. I noticed each time that the WD40 needs to be used due to the moisture and rust that is present. When I opened mine it was half full of water which I assume gets in through the unsealed connections on the umbrella tube when the umbrella is in the closed position. While I had the winch assembly out of the housing I drilled 3 small holes in the bottom to help drain that water out and hopefully prolong my repair efforts by not roting and rusting the rope and winch assembly.

[@mary-ellenscrivens8709]

That seems like a good idea. I will do that myself while I'm in the process of restringing and restoring the crank assembly. Thanks.

[@peternash6917]

Some useful tips and very clear instructions thanks!

[@mrdalesc3071]

This is excellent!!! Was about to smash mine to pieces until I stumbled across this video. Top work

[@athomehack7789]

Happy to help! Thanks for watching

[@mary-ellenscrivens8709]

Me too!

[@harryw9598]

top job, i made the same bungee strap. also drilled a hole in the pulley housing, any water that gets in, can drain out.

[@michellehuseyin7350]

Thank you for this video, helped me put the mechanism back together easily. Had to have a whole new center bolt/shaft made though as mine broke at the thread!! Can not buy the parts anywhere😭 Took the bolt to an iron mongers and they made one for me which was great!!!

[@barbarabennett7284]

This was extremely helpful! Just saved a pile of money!

[@nathenb.9198]

Great video, my screw broke in two. Does anyone know where to get it the long screw that goes attached to the crank?

[@cherilynrangirangi9608]

Thank you 😊 your video was most helpful

[@kleah8745]

My set up is exactly the same as yours. Only problem is threading the cord through the crank hole. Any suggestions/tips you can give please

[@robloxplayerlover]

😊 thanks saved a lot of money new cord instead of new parasol ❤

[@ronaldshankle3866]

Thank you so much it was very informative. I'd like to ask you a question where do you get the main bolt for the handle that goes through to crank it I cannot find it on the Internet anywhere.

[@nathenb.9198]

We’re you able to get it? Mine broke as well

[@belindahameister5977]

How does the gear release for winding down the umbrella? Mine won't budge yet is free moving inside to wind it up. Also, when you do the "crimp washer" it must be on the flat of the nut. Where you had it, it does absolutely nothing to stop the nut moving.

[@pogococo2246]

Thank you! Can you show us how to take the umbrella apart? I am having a hard time pulling it from the base. Thank you!

[@monaarant6384]

How do you remove the entire crank unit? I’d like to buy a new unit and not just repair the inside but it’s riveted onto the long pole

[@gretchenwagner823]

Question. The main metal screw that connects to crank snapped in half. Can that be replaced? Help!

[@johnbenson4476]

All those asking about getting a new shaft for the crank handle. If its the type with a square on one end where the handle fits and a slot on the threaded end. I made a new one from a stainless steel coach screw, using the old one as a sample. Stainless so it shouldn't rust (off ebay), drilled a new hole and cut the slot with a hacksaw. A fairly easy job if you are OK with DIY and have the suitable skills. The exact size may vary depending on your mechanism.

[@michaelcooper9892]

John what size and length did you use for this steel coach screw? is it hard to drill a new hole

[@johnbenson4476]

@@michaelcooper9892 As I said, the actual size may vary depending on your mechanism. I used an M10 x 75 stainless steel coach screw (Carriage bolt) I actually drilled it at work on a bench drilling machine, but it should be possible to do in a vice by hand - carefully and using a high speed steel drill bit and cutting fluid.

[@Jonesey96321]

Hello, appreciate this is an old video but hoping you can still support. I seem to have tighten the handle too tight and the metal bar which connects the handle to the crank bolt has snapped. I’ve tried searching for a replacement handle which includes the metal bar to thread all back together but no joy so far. Any ideas or advice would be appreciated. Thanks

[@moke868]

my bolt has broken and it's the same one as your video. do they have a special name for the bolt so i can purchase a new one

[@michaelcooper9892]

Does anyone know what this bolt that almost everyone has a problem with breaking is called ? ? coach screw, cotter pin bolt, split pin hole bolt ? ? There must be somewhere to buy one? Many people are trying to get the center bolt/shaft for their patio umbrella because it broke at the thread! Company will not let us get another one or even tell us what this is bolt is called? Our umbrella cost several hundred dollars and practically brand new but because of this bolt that maybe cots $2 broke it is useless.

[@morrisflory1046]

any suggestions on where to obtain replacement parts?

[@suzettes5295]

Do you have any advice on how to replace the part between the canopy and the frame?

[@MIAMINOLE99]

I have the exact same umbrella, but trying to replace crank. What is the brand of the umbrella?

[@athomehack7789]

Sorry for the delay. This is so old & has many parts added, no brand name is listed. I’ve had many of these types of umbrellas that I’ve junked, but always kept working mechanisms (crank, washers & gear(s) for doner parts. Unfortunately, these umbrellas need maintenance & break after 1-3 yrs of use……

[@truckertrow]

do you no were i can buy the big screw that winds it or the hole gear replacement cos my screw snapped

[@louiscamire5734]

Hi ....we have a large umbrella and the handle ( crank ) is broken....is there someplace to get a replacement crank É We havenèt been able to find a video that shows how to replace the handle crank. Thanks

[@ajgwelshchip]

Hi there, Please could you tell me where I might be able to get a new gear assembly, mine has not only rusted to death but the bolt that runs through the handle and gears has snapped. I live in the UK and cannot find anything so I am reaching out. What make is your Parasol? Love the Video by the way, good work.

[@melhutton3589]

Hi, this is really useful, thanks. On mine, the bolt thing with the split ends has snapped. Do you know what it's called? I'll definitely be able to fix it, thanks to your video, once I can find one of those!

[@louiebolarinho465]

Mine broke too and I’m having a hard time finding one

[@melhutton3589]

@@louiebolarinho465 I looked and looked but never found one, had to chuck the whole thing out in the end

[@johnbenson4476]

I did one for a friend which had sheared where the slot in the shaft is. Made a new one from a stainless steel coach screw (ebay), drilled the hole and cut the new slot with a hacksaw. Fairly easy for someone with a little DIY skills and tools.

[@anhelita123]

Thank you so much!!! 😊

[@AlexnaderSupertramp]

My crank housing broke where to by new assembly

[@brianegreulich3040]

I have a 2 month old version of this umbrella and the crank bolt broke in two on the weak end where the nut and gear is. I don't think it would be difficult to replace this bolt, only if I could find one. Any suggestions?

[@hooch1275]

I am having the exact same issue. Did you ever find a replacement part?

[@hdgavin4192]

Same issue in my end… no spare parts as per their support. BS

[@ronaldmack7503]

i noticed that you had the cord wrapped around the crank assembly. my question is then with the umbrella closed after restringing all the cord should be at the crank area?

[@athomehack7789]

There should be a small hole in the crank assembly. Put the string through this hole 1st & tie it off. When you crank the umbrella in (to open) it should wrap around what’s already there. Likewise when you close the umbrella. (You want at least 12” of “slack” on the string, to open or shut)

[@sak4550]

If it is a canvas umbrella the issue is the material has shrunk overtime. Try not to destroy your crank or rope assembly when the solution is to hacksaw off one inch off the end of each rod. This allows it to Crank up to proper hide again

[@melianapan]

I just got abba patio 10 feet 2 weeks ago ,now my umbrella won’t close when I cranked down. Do know have any solution for that?

[@athomehack7789]

I’m guessing something is getting “hung up” inside the tube, from the crank, inside the actual frame (tube) that opens & attached to the umbrella. I would start by checking that 1st. Then check to see if your “gear” is hung up and not functioning w/the “trigger” or stopper. I hope you get it fixed!

[@nancypierce3332]

Is there something that applies tension on the trigger? I have a small wire attached with the same screw holding the trigger to the assembly and it broke and I can't figure out what it was for and my trigger will rest on the gear but will not function. It's loose. So I'm thinking maybe this wire applied tension to the trigger or acted as a spring.

[@athomehack7789]

Sorry guys, I don’t have any “leads” to get parts. Unfortunately, nothing is built to last anymore... However, check on Craigslist from time to time to buy a similar umbrella, even if it’s broken! (Sometimes you might find this for free!! - broken) Use this for a “donor” / parts.

[@randallbieganski8909]

Fiberbuilt umbrellas sells this crank. ecp.yusercontent.com/mail?url=https%3A%2F%2Fcdn.shopify.com%2Fs%2Ffiles%2F1%2F0331%2F5322%2F0740%2Fproducts%2Fcrank-lift-kit-for-15-inch-pole-398045_compact_cropped.jpg%3Fv%3D1594156791&t=1623879521&ymreqid=22e5dfcb-aacf-46f8-21c7-a40040010a00&sig=zbwS_xSUfKEP1Af4W173_A--~D. The internal parts are the same.

[@rhondagraham6390]

Where can I buy a new handle

[@charlielindorm6261]

How does one find just the 'bolt' for the gear assembly? That bolt broke just past the nut on the threads and that is all I need to reaplace.

[@jillhenry4365]

Take the bolt to a welder. I just had a new one made.

[@slscheiber]

thank you for the video- do you have any recommendations on where one can get replacement pieces. found an umbrella in barn but the crank is broken. and I have not taken out all the pieces to make sure the washers and gears are all there.

[@athomehack7789]

Sorry, I don’t. Look on your local Craigslist for a used one for cheap, even if it’s broken. You can always use the parts! Should be cheaper than buying a new one.

[@hiddensoul3760]

Does anyone know where to get the long screw? Mine broke off and need to replace

[@gretchenwagner823]

I'd love to know too

[@michaelwohl521]

My gear assembly (just like the one you have) broke. I can't seem to fid a replacement anywhere. Any thoughts? Thanks!

[@SoloTravelCoach]

Any luck? I can't even find a brand name on mine but the gear assembly matches perfectly

[@ajgwelshchip]

ALIexpress are selling these as a whole unit, I have just ordered 1.

[@csmooth9794]

@@ajgwelshchip Can you provide the link?

[@klausrichter376]

Thank you ❤

[@renymullen4582]

My Umbrella is only 2 years old...little use. No Gear corrosion. Even the first year & Now this year even worse: Crank easily winds it UP, but Locks when trying to wind down down. Gear assembly functions well when cranking up, but does nothing going down....."something " does not release the UP gear....How to achieve that? .Very very difficult to force crank to wind it down....almost impossible for Senior woman. .....HELP! ...

[@renymullen4582]

Possible solution--Uncovered Gear Assembly....watched action while winding UP, & No action trying to wind down.....UNTIL I pulled sideways on thin spring attached to ratchet---worked! ...umbrella came down! Had to do that 3 more times, now it seems to be a final solution...the Spring was too tight! wow! so simple. will watch for awhile...attached small cord to bend in spring---to pull down...just in case!!! :D

[@annsullivan7896]

can you suggest where to buy a replacement crank handle for this umbrella?

[@athomehack7789]

Sorry, I don’t. Look on your local Craigslist for a used one for cheap, even if it’s broken. You can always use the parts! Should be cheaper than buying a new one.

[@annsullivan7896]

@@athomehack7789 thanks. I actually went around to a few different places and got everything I needed. I just have to put it all back together.

[@stephaniereddick1769]

i have the same mechanism, but the shaft snapped. Any suggestions on where to buy a whole new mechanism? Thanks!

[@athomehack7789]

Sorry, I don’t. Look on your local Craigslist for a used one for cheap, even if it’s broken. You can always use the parts! Should be cheaper than buying a new one.

[@catherineparker2794]

What do i need to do if my crank is uncranking itself?

[@athomehack7789]

You need to open up the “crank housing” and see if the gear(s) is damaged. (or what stops the gear from turning. Sounds like it’s stripped - hence the uncranking) You need to have the gear lock into place for it to stop after it’s fully opened. I hope this helps!

[@catherineparker2794]

@@athomehack7789 we were able to look at the gears and just tighten that nut in the front. Now it works perfectly! Thanks!

[@jerryneal7002]

Can you suggest where a new mechanism can be purchased? My mechanism is exactly like yours but very rusted.

[@athomehack7789]

Sorry, I don’t. Look on your local Craigslist for a used one for cheap, even if it’s broken. You can always use the parts! Should be cheaper than buying a new one.

[@stephenmoss877]

WD 40 !

[@eduardosicouret9086]

do you know where to buy replacement washers?

[@athomehack7789]

Sorry, I don’t. Look on your local Craigslist for a used one for cheap, even if it’s broken. You can always use the parts! Should be cheaper than buying a new one.

[@briep2461]

My dowel thing broke off at the end with the nut on it 😭 do you know where to get a replacement one?? I already looked at Home Depot and they said only the umbrella manufacturers would carry it unfortunately. I can’t seem to find online where to get one! I don’t even know the brand of this umbrella. Seems like it’s the exact same as yours

[@athomehack7789]

Sorry, I don’t. Look on your local Craigslist for a used one for cheap, even if it’s broken. You can always use the parts! Should be cheaper than buying a new one.

[@andrewvillaran7326]

Thank you thank you thank you

[@KARIUSHKY]

wow, it only lasted 1 year the new string? I bought my umbrella 4 1/2 yrs ago and the sting just broke las week

[@athomehack7789]

Actually, I own 2 of these offset (overhanging) umbrellas. The 1 vid I did a yr ago is different than this one in this vid. I’ve had both for over 8 - 12 years and re-stung both a total of 3 times. This one in this vid, is twice. I hope this helps!!

[@tayfurify]

Sonsuz teşekkürler.