2 separate Internet on 1 Fiber cable | NETVN

[@BTH82]

Show ALL Wi-Fi password with only 1 CMD kzbin.info/www/bejne/iHSUeIGFqsRnj7c

[@АлексейДанерлололлдлздздгшщшшз]

Yjuijki🛰📱🚦🔒🔐💻🚲🖥📡

[@АлексейДанерлололлдлздздгшщшшз]

📲🛰🔑📡🛰aA7900pkmsxvvcnl00🔑📲🛰🔐🔒🛰📡📱⛽🔏

[@АлексейДанерлололлдлздздгшщшшз]

WrfrAsfffgyyuumklloo4702q🛰📲📟

[@АлексейДанерлололлдлздздгшщшшз]

FjjjuiukiSfhjjjiissbjsAS🛰📲💻💻📡

[@АлексейДанерлололлдлздздгшщшшз]

SgfeeytySdsddd0000000pppppppppppppp🛰🖥💺📡🚦📟assssddd2wweeerrtty6ttt6t55555y67🛰erttttttyyuuiiiiiiooooouo9🛰0

[@d.wakateah6077]

You just shared your connection from ISP with the 2 routers, so nothing is achieved here in terms of speed doubling, if you simultaneously do speed check on both routers we will see that they are both sharing the same bandwidth.. This may only be useful if u want to extend your Wi-Fi range...

[@asthmatic2455]

or if you need 2 IP address,,,,

[@truthontech]

NETVN - You are a Genius! I have a home lab and this takes things to the next level. Thank you, thank you and thank you!

[@immickful]

Actually ISP won't allow to use multilogin (I mean double PPPoE connect as it was shown in your video)

[@robertojovannyrochamellado2133]

Sorry my English, I have 3 routers connected to the modem one above the other, the first one is 75 meters away from the modem and from there the second router is another 25 meters away from the first router and the third router is another 25 meters away. distance from the second router and they work fine with an internet speed of 150mb

[@jorgeperez-ip7hg]

The explanation of this video I want to think that it is to show that you can put the fiber mode in transparent mode and make two pppoe connections separately without affecting one pppoe account to the other, that is to say that you can carry out load balancing or summing of bandwidth and when doing a sum of bandwidth and when doing spedtest it will result in 200 approximate megs, will that be the mystery when solving?

[@areeb.chaudhary]

ppoe account can be used at one place(device) at a time unless the isp is dumb. As far as ip is concerned, by default isp's assign dynamic ips that means on every new connection request a new ip will be assigned. That can be prevented if one specifically puts a request to isp for static ip addr. So uhh, this man just bridge modem to 1st router that makes the pppoe connection then deletes the pppoe creds from first router and makes the pppoe connection from 2nd (dlink's) router.

[@channelmaryan1]

I was waiting for someone to do it

[@swatibhatt7597]

Some ISPs have mac authentication as well as simultaneous use function disabled. Creating a bridge connection won't help in that case. And as far as this connection is considered, the ISP has very unsecured network where you can dial the internet in any router within the LAN just by acquiring pppoe username and password.

[@bibeklaha9520]

But how can another person know about pppoe username and password Other isp do MAC binding where the router they have provided have it And simultaneously 1 connection will work not 2

[@work5565]

Ont working on two separate isp in bridge mode or pppoe mode we routing to lan1 1st isp lan2 2n isp

[@brutalz3ro]

Also, some have restrictions on the number of simultaneous pppoe logins.

[@aimn19861]

all commented don't know you should ask your ISP to activate internet on the second lan ,so this method is true you have two independent subscriptions cause you can activate up to four Internet subscribtions

[@piyage]

In the Huawei router, only one port was open, how did you connect 2nd router and it's working fine?

[@AdeelKzRajput]

when you unchecked LAN 2, LAN 3, LAN 4 then how do you connect your second Router WAN Line?

[@filipzoranovic7749]

Yes good question.

[@1Naif]

Re Enabled them 😅

[@techgoma]

lan3 port wasn't closed, how dlink was connected on port3

[@goldmaroc9035]

Illogique

[@urs_indian19boys21]

I ALSO DID NOT UNDERSTAND

[@AbdielSalas]

You can do the same with only one router, you can have many with different names also. I dont see the need for so many routers.

[@apricotcomputers3943]

Uhhh.. excuse me?? Why have multiple routers. Are you kidding!! TO HAVE A LAN PARTY DUHHH!!

[@SAKASRAKARA]

Where is the input in primary router all the input port are empty. Or wds method

[@XPERT518]

Интернет он один, его много не бывает. Правильно сказать 2 активных подключения к интернету.

[@anarquiles]

I think is easier if you configure both routers wan as dhcp... And connect it to lan ports of main fiber routers...

[@Ginfoo]

ISP automatically locked mac address from which router comes online first. It's not necessary to connect 3 routers for multiple SSID, we can shere our internet using multiple SSID through single router.

[@NavedKhan-ru3xb]

Simply use router on upnp mode and connect lan from fiber router to wan port of dlink or tp link router...no need to set it to pppoe mode....if you want more router to be connected to fiber router then use a switch with more lan ports..😁😁😁😁

[@mazizodelarmy]

No, this config create two separate public IP with same speed each.

[@DesordenadoPeroUtil]

@@mazizodelarmy with aggregation possibilities using a load balancer.

[@englishpracticee.p5002]

Ridiculous. Nothing is found interesting here.thisis how unskilled people can do even better.

[@AubsUK]

If your ISP allows simultaneous PPPoE (Point to Point Protocol over Ethernet - even if it is over FTTP [Fibre To The Premises]) connections with the same credentials, I'd be more concerned about their lack of knowledge of their systems. Also, this video doesn't demonstrate both connections working simultaneously to provide 2 × ~100 Mbps connections. It could have easily been the case that when the second connection was established with the same credentials as the first, that the first was disconnected. Based on the IPv6 IP, this person was in Viet Nam. And without wanting to sound condescending, ISPs in developed countries should be well aware of basic breaches such as this. If they are lax on this area, what other areas (especially customer security) are they lax in?

[@vladankoja]

What you use three router together in the one place?

[@michelegenchi]

Just for exercise? Are this useful?

[@isaacakrofisenakey3958]

How does this affect your internet subscription, and what are the main benefit of such setups

[@akshaymathur136]

@Asim Ayyubi There are multiple benefits, you just don't understand what he did here. He has two different external WiFi addresses to the same account. He is getting the same bandwidth (100 MBPS) on both connections, he has effectively doubled his bandwidth. Now, while one network is downloading something at 100 MBps, his second network will still give another 100 MBPS to him. He can have two simultaneous 100 MBPS downloads going on.

[@d.wakateah6077]

@@akshaymathur136 not exactly true, what he did here is just sharing the connection from his ISP on 2 routers, that is if he's receiving 100mbps, it gets divided by two... Once he does the speed test simultaneously you will see that nothing is really achieve here in terms of speed doubling.. This trick may extend your Wi-Fi range but can not increase your bandwidth...

[@LouvisV]

@@akshaymathur136 double bandwidth lmao

[@jorgeperez-ip7hg]

la explicación de este vídeo quiero pensar que es para mostrar que se puede poner el moden de fibra en modo transparente y realizar dos conexiones pppoe por separado sin afectar una cuenta de pppoe a la otra es decir que se puede realizar un balanceo de carga o suma de ancho de banda y al hacer una suma de ancho de banda y cuando realice spedtest dará como resultado 200 megas aproximado ¿sera eso el misterio al resolver ?

[@matrixzdelvalledelvalle7957]

X2 a tú comentario, lo único extraño es que desactivó el puerto cómo es que logra la conexión? Jajajaja

[@الهنوفمحمد-ث4س]

رغم ان الترجمه تضحك لكن شكرا جد شكرا 😂🍓

[@AbDo312100]

Alhanouf Alhanouf هل الطريقة شغالة صحيح

[@الهنوفمحمد-ث4س]

@@AbDo312100 لم اجربها لاني لا احتاجها حاليا

[@محمدنمرسي-ن9ص]

@@AbDo312100 هيا الطريقه دي بتعمل ايه للنت او فيدتها ايه بعد اذنك

[@محمدنمرسي-ن9ص]

@@الهنوفمحمد-ث4س استاذنك فيدتها ايه للانتر نت

[@dulkr2813]

اول مره بحياتي اشوف بنت مهتمه بالشبكات والاشياء الي كذا

[@satishkoorathota4306]

Alphion 100-c ONT support pppoe mode in LAN 1and LAN 2, bridge mode in LAN3 and LAN4. So we can access two internets in GPON OLT.

[@gha281984]

on your 1:14 did you mean to disable the use of lan2 lan 3 lan4?

[@Shaibj313]

Bro you just bridge the router and put secondary router nothing new at all....

[@joseyang5098]

Exactly.. nothing new in this video..

[@hmeducationchannel8800]

How to Share wifi signals for one km range and which device is best for sharing network

[@usamaakhan6060]

What If ISP requires particular VLAN ID as well?

[@BertM3]

Actually it should, that is why I am supprised it works. In the Huawai Router he deletes his PPPoE profile, which states VID11. So the original setup used VLAN 11.

[@mosharofhossain247]

Hdihvodoc

[@we300b]

@@BertM3 、 、 、 、 、 、 、 、 、

[@kashifnoor4750]

if we have more than 2 routers then? I have 7 routers in my office and i want to create this type of setup.

[@panaoutsios1990]

Is better 5ghz repeaters because cable is to much trouble if the house is large

[@blawrencesuper9944]

Can this be done by wireless means or extending those routers configured is only by cables?

[@ksun9106]

Thank you. It really shows a work to connect 2 routers. 😃

[@WhoPutMax]

What are you even talking about??

[@TanaseLiviu]

You cannot do this for every ISP . The PPPOE is unique , and admit just 1 connection, single NAT per user . So .... no can do

[@capedatanetworksza5913]

Then you can make use of Mikrotik Buildin PPPOE Server

[@lucasthielke]

​@@capedatanetworksza5913 I will say that. With a Mikrotik on the board, receiving 2 links, you can create 2 bridges with 1 Vlan each (Bridge 1 with Isp1 and Bridge 2 with ISP2) The other side only need a manegmant switch or an router that support VLAN, like Huawei AX3

[@work5565]

It's working.... 1st modem has working pppoe or static from isp side And Another device working on main modem dhcp mode.

[@ПавелХорошилов-п6н]

Only 1 IP address you can get if u had not corporate internet, only 1 WAN interface can be configured

[@ZaimAfham]

Yes its possible. My company use like this. Different isp but same infrastructure use same btu. Both plan is 1gbps. If both isp speedtest at same time will not achieve 1gbps. Maybe its the btu couldn't support more bandwidth

[@bandarbandar6102]

What the different between what you did and access point?? Because it’s easy to connect your router with access point devices.

[@Mecuyuds]

But both work correctly?

[@baclieulieu3265]

what is the reason you want to separate the networks

[@prabath_g]

is there any way to access huawei routers network from tplink or dlink. and also need to access tplink from dlink. i need to access by locally usinge LAN. Because NAS storage is connected to one router and my pc is connected to another subnet. and other devices connected to other router.?

[@dangphan2464]

Có cần bridge ở modem huwei ko bác. Hay chỉ cần như clip xóa pppoe, bỏ tích lan 2,3,4

[@n0madd65]

Does the main router still respossible to assign ip to each of the devices connected iether on the 2 add"l routers? thank

[@gomezaloysius]

What is the concept of this? Are you creating more access points?

[@gomezaloysius]

You disabled Huawei LAN 2/3/4 ports and immediately start to use the LAN 4 port. How is this possible?

[@jayblaze53]

how do u create a bridge with a new router from this specific huawei device

[@tropicaldirectionunofficia6456]

Can I used that for p2p?

[@mrwick9691]

I don't understand you closed the all lan port except lan1, then how will u connect 3rd router.

[@sajal9898]

may he used ghost protocol...🤔🤔🤔

[@A173642]

i just thought that you separate the 1 Fiber to 2 Fiber and plug in 2 separate Routers :)).

[@muhammedreda2095]

Did oun stop working in this case?

[@ql45gaming30]

Nhà mình dùng gói 660k Viettel , cho hỏi hiện nay dùng gói nào của vt cho quán net là phù hợp ạ ?

[@reso9yt]

But it would reduce the bandwidth wont it? If no Plz explain

[@walich7264]

Hi! I need assistance. I bought huawei 8546M router. I want to connect this on local internet cable, instead of Fiber optic. Is it possible

[@hp-shiro2648]

do I have to enable bridge mode ??

[@doitek]

You was doing correct in starting after that you made fool of all the people. Lan 2,3,4 was unchecked and you connected 2nd router with lan port 2... What do you think who are we ?

[@badtimegonesingh8883]

If i solder out 100mbps wan port and soldier in 1gigabit wan port. This will convert my 100mbps router to gigabit one?

[@heberbenites7717]

how does the provider accept two simultaneous connections!? using the same PPPOe account was not to reject the second login attempt? thanks.

[@quoctuongduong1794]

Mình cần 2 đường modem vào chung 1 cục phát wifi cơ ad có biết làm ko hihi

[@AndreMBaptistaBR]

has not been fully explained. this video is missing a lot. example: how did you connect with the same IP on two routers? disabled port 2,3 and 4 and then connected the cables and did not show activating the port.

[@pradnyeshsoshte]

pppoe protocol allows 1 device at a time. i have done this type of tutorials. and its having mac authentication. in this video all this things are not explained.

[@sushantdongre7090]

@@pradnyeshsoshte You can clone MAC ID. Hope this helps.

[@AslamKhan-om6jc]

can fiber cable connect with dsl

[@krisdaveulat459]

When the main router is off do this still work?

[@virakranger9280]

Absolutely not

[@mmmmmmmmmmmmmmmmmmmmmmmmmm3153]

Lmaaao, dumbest question i see in a long fukin time.

[@puonhoang7927]

A ơi! cho e hỏi : lúc đầu modem huawei đã disable từ lan 2 -> lan 3. nhưng tới cuối gắng thêm modem Dlink sau dùng dc ah. E chưa hiểu khúc đó ah

[@NETVN82]

Đặt bridge trên Huawei, gắng account ở 2 wifi

[@dangphan2464]

@@NETVN82 clip thiếu bước bridge đúng ko bác. Trong clip Xóa hết pppoe, tắt lan 234, mà cam vao wifi vẫn quay đc ak bác.

[@samialam5455]

Some one use my internet by barcode scans .please help me. How can I change the setting they will never use barcode scans in mobile

[@knockknocktech]

thanks for your wonderful work and i need too know that .. how it work in both router with same Account (pppoe id ) ? And also comes with different IP address ? so cool ...

[@quyetthang2705ytb]

cùng cách làm như thế này nhưng mình cài trên 2 wan của 1 router ví dụ draytek sau đó gộp băng thông lại thì nó có thành x2 không? vì như hướng dẫn thí nó ra 2 IP WAN khác nhau mà

[@NETVN82]

Được bạn nhé

[@quyetthang2705ytb]

@@NETVN82 anh thử với các nhà mạng khác chưa

[@nguyentrung791]

Mình gộp băng thông từ lan 3, lan 4 mà nó ko tăng lên như 2 wan từ 2 nhà mạng nhỉ.

[@Zeus-fh4el]

hello , it's very helpful thank you , just i want to know what about the main router ? when deleted the wan config you did not do nothing on it ? finnaly will work also or not ?

[@foolbaby666]

In my country isp. Indihome. The pppoe connection is locked on mac of the modem. So we cannot change to other device. Even if we change the modem to bridge mode.

[@mahmad-cx9jf]

GOOD WORK

[@NoName-xc3ux]

Arra lennék kiváncsi, hogy az egyszerre futtatott speedtest milyen eredményt hoz?

[@jingercipriano8441]

Hi, I only have 25mbps and I want to share my connection to my mom's house which is 120 meters away. Whats the best and cheapest way to connect? Thank you in advance for the answer. GODBLESS

[@ks4video614]

Use wifi router as repeater

[@godsmackssa]

ips are different but the connection still divided. You have not created 2 different internets.

anh ơi. khi cài đặt wifi số 1, cái máy tính của mình có ghim dây mạng vào cái số 1 ko để cấu hình

[@NETVN82]

máy tính bạn cắm vào cổng lan wifi số 1 và cài đặt

[@guillermoherilla2479]

Wheres you main router?

[@Robert-tl3gw]

Hello! I have a question Can I use a cat6 20 meters cable with two rj45 connectors to connect a modem to a wireless (Tplink)?

[@NETVN82]

Yes

[@Robert-tl3gw]

@@NETVN82, I asked you because I am going to buy one of that cable because the cable wich comes in the box with to router has 1 meter and is too short and I need to move he router in other room. Thx for answer 👍

[@johnmarston8821]

How in my modem ISP not have wire or irel and not can join its wan (wired connect)

[@mr-wi8gq]

Router?

[@kuyavenzinfovlog]

what i use two simcard modem. is it usefull to combined the two isp here like balancer?

[@kuyavenzinfovlog]

because i see it here two wan(blue port) can you help me to explain more about this device?

[@haribaskar846]

It's not working...any one of the router connect to internet...both not connected at same time

[@asthmatic2455]

Hi, what can I do, If I dont have PPOE, only direct ethernet line from provider (with dynamic IP, btw) ? It will works? Thanks

[@sejarahindonesia3180]

your internet packet is fast bro, how much do you pay for it for one month?

[@buikien1501]

About 9-10 USD per month in rural area,10-11 USD in urban area

[@FirasFlix]

is it that easy ? so simple !!!

[@rohitpaliwal1387]

There is no WAN cable connected to central router, how it's getting connected?

[@hautruong9273]

Ad cho hỏi cái modem 2 tại sao phải dùng PPPoE thay vì Dynamic IP?

[@professionalnews1975]

Optical Fibre router price

[@AzharAli-Family]

I don't understand the benefits of this video could you tell me how is beneficial for office work?

[@dulichvietnamvietnamtravel4118]

Quay PPPoE này là cùng 1 tài khoản nhà mạng cung cấp hay 2 tài khoản vậy bạn!

[@NETVN82]

cùng một tài khoản bạn ạ

[@satuduatiga6792]

So, what is purpose to separate PPoE connection? different Public IP?

[@virakranger9280]

PPPoE in this video is same PPPoE account and doesn't have Public IP.

[@gezaporondu2461]

...if your ISP let you to connect 2 times with 1 account.

[@richievellalar3214]

What is the purpose doing this ?

[@PeepleVeeple]

Huwaei pon lan 3 port is disabled how dlink router connected.... with internet n test speed

[@rizal2765]

It does not run on ethernet, but using ppoe. So port 3 and 4 become ppoe (layer 3)

[@bienzelynalquiza9387]

Thanks for an information

[@shura_kofeynik]

the game is full, everything can be much easier using just one router

[@roshdysourour4409]

what is the use of having 3 routers side by side

[@A173642]

You can create 750 IP for 750 user :))

[@engr.ireniyiayo-philip3955]

@@A173642 That means all of them will be giving out different IP and please will they also be on the same network pls?

[@manocutti]

Sir how to connect the same internet but 2 saprate connection with the one modem.

[@nguoinongdanyeucongnghe7385]

không được đâu ông anh ơi, nó chỉ xác thực được 1 trong 2 cổng wan thôi, cái modem 1 chạy thì cái modem 2 ko chạy và ngươc lại. Không khả thi

[@ThuyNguyen-xw1qn]

Anh Nông Dân Yêu Công Nghệ ông này reup biết quái gì chết liền

[@alfer3onal3ashk88]

I have a question for u. What about DHCP. I should close from Dlink and tplink. Is that right or no? I should disable DHCP from Dlink and Tplink Or I should enable in Dlink if I will use just Dlink and disable DHCP in fiber router

[@ukaszturon8893]

1 router + Vlan = evrything to doo this end mor

[@RHSInfo2U]

He used the onu as a onu switch and got dial up from the mikrotik

[@akg.69]

What is the benefit of doing this?

[@NETVN82]

you have 2 internet connections, if you combine these 2 lines the speed is doubled

[@akg.69]

Net VN you mean to bridge connections.

[@dr.abubakorsiddique]

@Jitendra Rathore He won't reply😁

[@vanbuithanh7848]

@@NETVN82 làm sao để gọp 2 đường này với nhau chỉ qua 1 con modem vậy anh

[@NETVN82]

kzbin.info/www/bejne/pJ3Lqqitrq91aM0

[@tamdong563]

cái này có lợi ích và ứng dụng vào điều gì trong thực tế vậy ad

[@KaikyPlaygames]

Pode ser quantas internet's vc quiser kkkk, isso daí é só um exemplo!😉

[@minhduy1981]

Có nghĩa là 1 account ftth mình chạy trên 2 modem khác nhau đúng không add?

[@NETVN82]

Đúng rồi bạn

[@DatAudioCinema]

Tác dụng của việc này để làm j ad