2 Stroke Cylinder Installation Procedures and Concerns with the Piston Rings

[@parcl]

You saved my life. For some reason nobody else talks about those pins in their videos, helped a dumb dumb like me figure it out

[@How2Wrench]

Glad it helped! Thanks! Join the channel. Best $1.99 you'll spend to access all 800 vids and Shane Daily! Smash the sub and like please. Throw Shane a high five donation, channel membership or merch for saving you $$$$$$$ Links below to support more for this work! 🙏 You rock for commenting! We will let Shane know! Want even more? Best $2 you'll ever spend...Join this channel to get access to perks: kzbin.info/door/BhM8DCKnT3qXwTW0eToyCgjoin -Daily MEMBER FIRST COMMENTS ANSWERED FIRST -Live Q/A video chats -Wonder if we have a video on your need? Members can request content links! -Full Access to the ENTIRE 800 video library -Member-Only FREE tool giveaways Ways to support or high five How 2 Wrench! Thank you in advance. YOU MOTIVATE US TO DO MORE! 1. Smash the subscribe button (thank if already a sub!) 2. Have you seen our "KZbin Trained Support Shirts? goodfellasmerch.com/collections/how-2-wrench/products/support-shirt 3. High five donation: www.paypal.me/how2wrench 4. Got an emergency and your head is about to explode from frustration or fear? Get Shane’s cell here: how2wrench.com/ols/products/techline-one-on-one

[@ailaikuse1922]

This video helped me assemble my cylinder back over the new piston using the "twist" trick. Was impossible without the twist. Thank you for the tip! 2001 RM250

[@dudleyrome]

excellent video if more informative videos were done like this the world would be a better place keep up the good work.

[@michaelford2655]

To the point, short, simple and well explained

[@jenntek.101]

Thank YOU!!! You and one other YT video saved me time, money, appointment setting... and a trip to the local mechanic! :D

[@How2Wrench]

Hello friend! Have you Subscribed yet to never miss a video? Have you seen the video playlists kzbin.infoplaylists ? Still have questions? Coach Conley provides tech help and works one on one! His KZbin and training center has grown beyond the ability to answer every question (11 million views! Over 500,000 a month!) He gets 300-400 requests a week. Become a member for his direct cell phone number and personal assistance! Click here for the membership links and welcome to the community! how2wrench.com/product-category/specials/ Want to say “thanks” or “keep it up”? Click here www.paypal.me/how2wrench Your answers and help are just around the corner. Save time and money while protecting your investment and yourself by doing it the right way!

[@How2Wrench]

Share it friends!

[@spmoto3870]

this video made it easy to understand how piston rings should line up and a good technique on how to slide it all together

[@How2Wrench]

Thank you! You can reach me personally @ how2wrench.com/contact/ Please show your support by a membership or donation to get the help you need beyond those popular free videos that have saved you so much money and grief! You can say thank you here: www.paypal.me/how2wrench

[@sporadicnomads]

Awesome vid, thank you sooooo much! After enough frustration trying to slide a ktm cylinder on to drive me to YT, the tips and advice in this video helped get it on the next try 😅🥳👍

[@How2Wrench]

Glad it helped! Thank you for commenting. Could you spare $2 and support us with even more benefits? Would you consider helping support our work here and help keep us going? We can’t thank you enough for helping us keep making technician training impacting schools all over the world. Smash the subscribe button and bell! Join this channel to get access to perks: kzbin.info/door/BhM8DCKnT3qXwTW0eToyCgjoin -Daily MEMBER FIRST COMMENTS ANSWERED FIRST -Live Q/A video chats -Wonder if we have a video on your need? Members can request content links! -Full Access to the ENTIRE 700 video library -Member-Only FREE tool giveaways Just want to say thanks quick to support us for this information and our work saving you money? Give us a high 5 here: www.paypal.me/how2wrench

[@williamotto2366]

Engaged students exciting instructor , time and money well spent

[@crosstrainingenduro]

awesome vid, thanks for sharing!

[@levix_the_birb]

Thank you! This helped me a lot after my entire engine fell apart as I was replacing the cylinder head

[@How2Wrench]

Glad it helped. We will let Shane know! You rock! Best way to help us back is joining or grabbing our T-shirt! Support links and gear below! Awesome and thanks for commenting! Smash the subscribe button (thank if already a sub!) Have you seen our "KZbin Trained Support Shirts? Great way to "high five us" goodfellasmerch.com/collections/how-2-wrench/products/support-shirt Join this channel to get access to perks: kzbin.info/door/BhM8DCKnT3qXwTW0eToyCgjoin -Daily MEMBER FIRST COMMENTS ANSWERED FIRST -Live Q/A video chats -Wonder if we have a video on your need? Members can request content links! -Full Access to the ENTIRE 700 video library -Member-Only FREE tool giveaways Just want to say thanks quick to support us for this information and our work saving you money? Give us a high 5 here: www.paypal.me/how2wrench Got an emergency and your head is about to explode from frustration or fear? Get Shane’s cell here: how2wrench.com/ols/products/techline-one-on-one

[@marissaawesome2422]

Oh shit thank you soooooo much! Something that simple. Wish I would have looked this up 1 hr ago. Thank you

[@How2Wrench]

If I can ever be of service to you, here is a video explains how to connect with me. kzbin.info/www/bejne/rJvZnnVmZsqVmdU Keep Wrenching, Shane Conley Instructor/Motivator/Motorcyclist www.how2wrench.com Like freebies? Click here for a free diagnostic checklist! gem.godaddy.com/signups/364621/join Did you like this free video and hope to see more? Would you just like to say thank you with a donation? Click www.paypal.me/how2wrench

[@SidewayZ.garage]

Holy crap thank you so much! It worked so easy once i made one of them U things to hold it still out of wood! It slipped on like nothing this time

[@webmastertaylor]

Great teacher! Well done as always and thank you.

[@How2Wrench]

Thanks for commenting and adding value to our community! Please subscribe, share and consider a H2W membership to support our free work here! We are ramping up for the upcoming new member only site with profiles, raffle drawings, and weekly live Q/A sessions and a for sale page! We have a LIVE Q&A starting soon and will use comments from videos to try and answer too. Got a question you need answered sooner than our LIVE Q&A Shows are on? Here’s how to get your answer for free! kzbin.info/www/bejne/pXLIia1no8lgm7M (and other free tools and products!) Get my cell number here: how2wrench.com/product/personal-tech-training-phone-facetime/ Have you subscribed yet to never miss a video? Have you seen the video playlists? Over 600 videos! Check them out here: kzbin.infoplaylists Your answers and help are just around the corner. Save time and money while protecting your investment and yourself by doing it the right way at www.How2Wrench.com Want to say “thanks” or “keep it up”? Click here www.paypal.me/how2wrench Thanks for commenting and adding value to our community!

[@Footrotflats251]

thank you for the video - it really did clear things uo for me in terms of what to do during a 2stroke rebuild!!

[@bladecppro26]

very interesting tip.I bet this guy could build one mean 2 stroke motor, thanks for the video and info -john in texas

[@How2Wrench]

John Pannell Thank you for the kind words. If I can ever be of service to you, here is a video explains how to connect with me. kzbin.info/www/bejne/rJvZnnVmZsqVmdU Keep Wrenching, Shane Conley Instructor/Motivator/Motorcyclist www.how2wrench.com Like freebies? Click here for a free diagnostic checklist! gem.godaddy.com/signups/364621/join Did you like this free video and hope to see more? Would you just like to say thank you with a donation? Click www.paypal.me/how2wrench

[@erikthered3601]

The ormational video about installing a piston I've found 9n youtube...thank you.

[@How2Wrench]

Glad it helped! Thanks! Join the channel. Best $1.99 you'll spend to access all 800 vids and Shane Daily! Smash the sub and like please. Throw Shane a high five donation, channel membership or merch for saving you $$$$$$$ Links below to support more for this work! 🙏 You rock for commenting! We will let Shane know! Want even more? Best $2 you'll ever spend...Join this channel to get access to perks: kzbin.info/door/BhM8DCKnT3qXwTW0eToyCgjoin -Daily MEMBER FIRST COMMENTS ANSWERED FIRST -Live Q/A video chats -Wonder if we have a video on your need? Members can request content links! -Full Access to the ENTIRE 700 video library -Member-Only FREE tool giveaways Ways to support or high five How 2 Wrench! Thank you in advance. YOU MOTIVATE US TO DO MORE! 1. Smash the subscribe button (thank if already a sub!) 2. Have you seen our "KZbin Trained Support Shirts? goodfellasmerch.com/collections/how-2-wrench/products/support-shirt 3. High five donation: www.paypal.me/how2wrench 4. Got an emergency and your head is about to explode from frustration or fear? Get Shane’s cell here: how2wrench.com/ols/products/techline-one-on-one

[@izzy4712]

i have a 125 2stroke 2002. suzukie. haveing a hell of a time finding the manufactoring to purchase an motor new or used?

[@khaled6100]

when i rotate the cylinder does the ring rotate also and missing the little grove on the piston ?

[@mjrybread]

If im not realy running my rm 125 real hard do i need to drill those lubrication holes?

[@PaulDavisTVCareer19yrs]

Man I need your help! I am working on seadoo 787 Rotax 1997 and I just can't mimic your approach. I do not think I can find stops anywhere? My brother is JJ Davis who works at Iowa Western. I wish I could bring my jetski over to you guys and show me what I am doing wrong. JJ says he knows of your program!

[@nickclarkuk]

Great video, thank you!

[@krisn8820]

I know this an older video, but I would like to see a video of what aftermarket parts are quality? Specifically, Namura pistons.

[@How2Wrench]

I do product reviews at times but mostly the videos on this channel are "skill set" based. I have used most Wiesco and OEM pistons with long-term feedback. I just don't recall any time I had good or bad with Namura...Always giving honest feedback good or bad here... Have you Subscribed yet to never miss a video? Have you seen the video playlists kzbin.infoplaylists ? Want to say “thanks” or “keep it up”? Click here www.paypal.me/how2wrench Your answers and help are just around the corner. Save time and money while protecting your investment and yourself by doing it the right way at www.How2Wrench.com

[@shark11175]

Terrible piston

[@chriscastillo9695]

do you have video on jug change on razor 900?

[@How2Wrench]

I do not. The principles are similar. I do offer personally mentorship through live chat and could walk you right through it as you do the work! Head over to the new website and subscribe to the newsletter to never miss a video or newsletter! how2wrench.com/contact/ If I can ever be of service to you, here is a video explains how to connect with me. kzbin.info/www/bejne/rJvZnnVmZsqVmdU Keep Wrenching, Shane Conley Instructor/Motivator/Motorcyclist www.how2wrench.com Did you like this free video and hope to see more? Would you just like to say thank you with a donation? Click www.paypal.me/how2wrench

[@p.c.h.6721]

Do you leave a margin of safety between the wall of the cylinder and the ring of the piston? I have seized my engine for having a ring too tight.

[@How2Wrench]

There a specific clearences that must be there for piston growth. The specs vary from the type of material the piston is made from (or how) too. Like cast vs. forged. 👍 Thank you for taking the time to comment! Hit that subscribe button if you haven’t please! It helps us! Here is a way to support all the free videos. Want to say “thanks” or “keep it up”? Click here www.paypal.me/how2wrench Coach Conley is also available for hire to personally work one on one with you if ever needed. Yep he is a real person. Give him a call @ 602-345-0432 Your answers and help are just around the corner. Save time and money while protecting your investment and yourself by doing it the right way! Follow us! Web: www.How2Wrench.com www.Tools2Wrench.com

[@smileyrod11]

can i usu the spring clamp to this job let me know thanks

[@مرتضیملاعبدالهی]

Hi, I want to transmit the Yamaha rd200 power system. Can you advise on voltage? Can a single-cylinder electric motor be used?

[@How2Wrench]

Sorry I don't have specs... 👍 Thank you for taking the time to comment! Hit that subscribe button if you haven’t please! It helps us! Here is a way to support all the free videos. Want to say “thanks” or “keep it up”? Click here www.paypal.me/how2wrench Coach Conley is also available for hire to personally work one on one with you if ever needed. Yep he is a real person. Give him a call @ 602-345-0432 Your answers and help are just around the corner. Save time and money while protecting your investment and yourself by doing it the right way! Follow us! Web: www.How2Wrench.com www.Tools2Wrench.com

[@lwthowe]

I'm wondering how to install a chamfered piston ring on a small 2-stroke engine that only has the 1 ring (Husqvarna 125B leaf blower). Should the chamfer be installed on the top or the bottom around the piston. in other words, should the bottom of the ring be touching the cylinder wall, or the top of the ring be touching?

[@TiberiusStorm]

So when you were putting the cylinder onto the piston and turning it the Piston rings were still locked into position?

[@How2Wrench]

Peder...checkout our playlist on our channel.

[@naveedaka]

sir...can head gaskets be fitted in either direction??

[@mfmonthefmf]

Awesome, thank you!

[@russg1801]

So, I can do a ring job on a PWC engine without pulling the motor and doing a full teardown?

[@marioraja4229]

do you recomend 1 ring or 2 ring per piston ?

[@How2Wrench]

It varies on use and life expectancy. Many modern two-strokes come with one ring. You're in luck. I do offer personal service to back up what's missing from a video to actually fix your specific problem. I do work on donations for my time and possible research. Good news is its CHEAP! For my time would mind becoming a member of my website? It comes with a free 20 mins of techline and that will cover my time to assist you so we both benefit. So to have me personal cell phone number to put in your phone as your direct info and how to coach, sign up now! As always thank you and enjoy the free videos! Much more to come! I look forward to working with you and hope you will become a member of or learning community. Link to membership: how2wrench.com/product/membershipmembers-onlymembers? If I can ever be of service to you, here is a video explains how to connect with me. kzbin.info/www/bejne/rJvZnnVmZsqVmdU Direct link to services: how2wrench.com/product-category/tech-lineservice-callminutes/ Live Chat is great for you to actually show your specific issue! Donation link: www.paypal.me/how2wrench

[@specialalaskan8625]

2 so you have a compression ring and an oil ring, it will make your motor last longer. also recommend forged pistons thru weisco. forged gives more horsepower and will last longer too, but you have to let your motor warm up longer than normal.

[@mohamedyounus9397]

I am impressed

[@How2Wrench]

Thanks for commenting and adding value to our community! Have you subscribed yet to never miss a video? Have you seen the video playlists? Over 600 videos! Check them out here: kzbin.infoplaylists Want to say “thanks” or “keep it up”? Click here www.paypal.me/how2wrench Your answers and help are just around the corner. Save time and money while protecting your investment and yourself by doing it the right way at www.How2Wrench.com

[@mesy1994]

you are too clever for this planet ...

[@How2Wrench]

If I can ever be of service to you, here is a video explains how to connect with me. kzbin.info/www/bejne/rJvZnnVmZsqVmdU Keep Wrenching, Shane Conley Instructor/Motivator/Motorcyclist www.how2wrench.com Like freebies? Click here for a free diagnostic checklist! gem.godaddy.com/signups/364621/join Did you like this free video and hope to see more? Would you just like to say thank you with a donation? Click www.paypal.me/how2wrench

[@downtowndusky]

I had no idea. thanks

[@How2Wrench]

Happy to help. Thank you for commenting. Want more benefits? Smash the subscribe button and bell! Want even more??? Join the channel: -Daily MEMBER FIRST COMMENTS ANSWERED FIRST -Live Q/A video chats -Wonder if we have a video on your need? Members can request content links! -Full Access to the ENTIRE 700 video library -Member-Only FREE tool giveaways Join this channel to get access to perks: kzbin.info/door/BhM8DCKnT3qXwTW0eToyCgjoin Just want to say thanks quick to support us for this information and our work saving you money? Give us a high 5 here: www.paypal.me/how2wrench

[@pedrorodriguez2778]

when an you do a 4 storke cylinder installation procedures and concerns with the piston rings thanks

[@kawkid1]

what engine is that a 250cc?

[@How2Wrench]

2001 kx250 Kawasaki...Thank you for sharing…below are some links that help support me and my work. Please subscribe and share these videos to make a difference in education! Keep Wrenching, Shane Conley Shirt/Stickers link: how2wrench.com/product-category/specials/ Want to say “thanks” or “keep it up”? Click www.paypal.me/how2wrench Follow us! Web: www.How2Wrench.com www.Tools2Wrench.com KZbin: kzbin.info Instagram: instagram.com/how2wrench/ Linkedin: www.linkedin.com/in/shane-conley-how2wrench/ Facebook: facebook.com/MechanicsLearningSharingPage/ Free Mechanic info, tool reviews, and “how to” videos newsletter sign up: how2wrench.com/subscribe-free-newsletter/ Amazon Tools: www.amazon.com/shop/shaneconleyhow2wrench?ref=ac_inf_hm_vp

[@mikesticka8267]

What 250 is that yamaha ?

[@How2Wrench]

KX... Thank you for the kind words! Head over to the new website and subscribe to the newsletter to never miss a video or newsletter! how2wrench.com/contact/ If I can ever be of service to you, here is a video explains how to connect with me. kzbin.info/www/bejne/rJvZnnVmZsqVmdU Keep Wrenching, Shane Conley Instructor/Motivator/Motorcyclist www.how2wrench.com Did you like this free video and hope to see more? Would you just like to say thank you with a donation? Click www.paypal.me/how2wrench

[@garytauber430]

very interesting

[@How2Wrench]

You're very welcome! Have you subscribed yet to never miss a video? Have you seen the video playlists kzbin.infoplaylists ? Want to say “thanks” or “keep it up”? Click here www.paypal.me/how2wrench Your answers and help are just around the corner. Save time and money while protecting your investment and yourself by doing it the right way at www.How2Wrench.com

[@thecr80rider04]

is that a ktm or suzuki motor?

[@jos-a-jmcp1504]

Looks like Suzuki

[@theDugonator]

What was that engine from? If I had to guess I'd say a cr250.

[@Bloodfang152]

Joe Mamma look like a ktm 200exc. cylinder says 219cc & looks real similar to my buddies

[@godsdozer]

I use a zip tie around the ring. jug will push the zip tie out of the way on the way down.

[@How2Wrench]

Nice...

[@jeffpyne3801]

how does the magneto on 2stroke engines

[@lookronjon]

At 13 I knew this. I was changing crank bearings and diagnosing electrical faults by the time I was 14. My father was a jet mechanic. I had a moped that would 52 on flat ground. Over 60 going down the bridge to the beach.

[@How2Wrench]

:)

[@xXViper-9Xx]

Okay not everyone was you and I don’t remember asking what you could do at 13

[@Chris-uh3cm]

Don’t pat yourself on the back too hard now

[@artofcards_tcg]

At 13 I kNeW tHiS

[@tylerrude7049]

Cool story

[@Blackford86]

Where is the rest of the video??

[@inspectyerbooty]

now this is a good video, ... thanks

[@JoselCadiz]

Cómo moto los anillos y el pistón y el cilindro un motor poralis 96 çlx 780

[@johnpaulbaylas247]

The right one

[@garytauber430]

I turned my barrel and could feel the piston ring snap I am fed up with doing this job

[@How2Wrench]

If it was a quick answer I’d try to respond here but I wouldn’t want to lead you wrong assuming certain factors. Reach out to me on my website contact page. We have been overwhelmed with ungrateful people and scammers so I had to do something for my sanity by screening the over 300 requests a week! Contact Link: how2wrench.com/contact/ Your answers and help are just around the corner. Save time and money while protecting your investment and yourself by doing it the right way at www.How2Wrench.com Have you subscribed yet to never miss a video? Have you seen the video playlists kzbin.infoplaylists? Want to say “thanks” or “keep it up”? Click here www.paypal.me/how2wrench

[@pixelgecko1707]

Forgot to lobe the cylinder and piston

[@johanengqvist4333]

Assembly grease, please;)

[@How2Wrench]

+Johan Engqvist If you're a new subscriber you would have maybe missed when I video engines or parts that are not run we try to keep the camera view open as possible. Check out the playlist Every Mechanic Should Know This: kzbin.info/aero/PLAtBOuPaEyt_uMyVlK1tsBVnSYW1Q0vCK Thank you for commenting and please share! Keep Wrenching,Shane ConleyInstructor/Motivator/Motorcyclist

[@chandershekher3105]

piston ko Rama kaise kar

[@How2Wrench]

Have you Subscribed yet to never miss a video? Have you seen the video playlists kzbin.infoplaylists ? Quick answers are often found here. No time to look through videos? Still have questions? You’re in luck! I provide tech help and work one on one! I know your question may seem quick but with over 300 requests a week, it’s not possible to answer them all. So, I’ve narrowed down so subscribers and donations to assist beyond the over 660 free videos. My KZbin has grown beyond the ability to answer every question (11 million views! Over 500,000 a month!) Click here for the membership links and welcome to the community! how2wrench.com/product-category/specials/ Want to say “thanks” or “keep it up”? Click here www.paypal.me/how2wrench This is great for those truly quick questions you need answered and your help back will keep me going! Your answers and help are just around the corner. Save time and money while protecting your investment and yourself by doing it the right way! Admin How2Wrench.com

[@g-n-g3576]

piece of paper would compress rings while lowering cylinder... or so ive been told

[@How2Wrench]

Can you add some more details of how? I'm not visualizing what your getting at. Thank you in advance. We sure love you taking the time to comment. Are you coming to the next live session? The fastest and best thing you could simply do for us is hit that subscribe button…helps us creators more than you know! Join this channel to get access to perks: kzbin.info/door/BhM8DCKnT3qXwTW0eToyCgjoin Want to help us back? Please subscribe and give us a high 5 here: www.paypal.me/how2wrench Follow us! www.How2Wrench.com www.Tools2Wrench.com Facebook: facebook.com/How2Wrench/ Instagram: instagram.com/how2wrench/

[@g-n-g3576]

@@How2Wrench Yes, as I was instructed, you wrap paper around piston holding rings in and slide piston over that using paper as a guide. Slip the paper out and youre golden.

[@djmystery7235]

Does anyone realize at any time there's 50million pistons behind him

[@mikechapman6050]

Put the piston in the cylinder first then just stick the pin in

[@How2Wrench]

Hi Mike. We did a quick search of Shane's channel (we are the social media team) and found this video showing your same suggestion! We asked Shane quick and he said he doesn't do that on two-strokes as they are pretty easy to work with the rings but he said your are absolutely right on. kzbin.info/www/bejne/iourYniwqtqFf5Y Glad it helped. We will let Shane know! You rock! Best way to help us back is joining or grabbing our T-shirt! Support links and gear below! Awesome and thanks for commenting! Smash the subscribe button (thank if already a sub!) Have you seen our "KZbin Trained Support Shirts? Great way to "high five us" goodfellasmerch.com/collections/how-2-wrench/products/support-shirt Join this channel to get access to perks: kzbin.info/door/BhM8DCKnT3qXwTW0eToyCgjoin -Daily MEMBER FIRST COMMENTS ANSWERED FIRST -Live Q/A video chats -Wonder if we have a video on your need? Members can request content links! -Full Access to the ENTIRE 700 video library -Member-Only FREE tool giveaways Just want to say thanks quick to support us for this information and our work saving you money? Give us a high 5 here: www.paypal.me/how2wrench Got an emergency and your head is about to explode from frustration or fear? Get Shane’s cell here: how2wrench.com/ols/products/techline-one-on-one

[@vanalstyne9834]

Never twist the cylinder. Never.